RESUMO
ConspectusTwo-dimensional (2D) molecular materials, in which the major interactions are confined in 2D planes with contrasted force fields acting in between the planes, have been key electronic functional materials since the past decade. Even without referring to the functionals of graphene-based systems, 2D electronic conjugated systems are expected to show extrawide dynamic ranges in electronic density of states (DOS) tuning, effective electron mass, electron mobility, and conductivity. A major advantage of 2D electronic systems is their compatibility with the ubiquitous electronic devices designed using planar structures, such as transistors and memories, which is associated with the utility of 2D active materials. The mobility of electrons in 2D systems is the key to their utility, and various conjugated molecular and 2D materials have been designed to optimize the mobility. This Account begins with an introduction for mobility assessment: using noncontact time-resolved microwave conductivity (TRMC) measurements as a technique to probe differential conductivity upon transient charge carrier injection into the materials. Electronic transport over 2D electronic materials such as graphenes, covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) is discussed with a special emphasis on molecular building blocks, fine-tuning conducting species and linkages, topology of the framework, and controlling molecular doping. The superiority of ß-ketoenamine-linked COF over imine-linked COF films in charge transport and dominant in-plane charge carrier mobility over out-of-plane mobility is also illustrated. Systematic molecular engineering of the building blocks of ß-ketoenamine-linked COFs with varying degrees of donor-acceptor (D-A) conjugation, torsional angles, and reaction conditions resulted in the modulation of the efficiency of charge carrier generation/transport as well as exciton migration. The advantages of 2D systems are finally discussed in terms of the mobility interplaying with spatial arrangements of molecules as well as the substantial role of intermolecular interactions in stabilizing their condensed phases. The strong correlation between the dispersion of mobility and hierarchical intermolecular interactions sheds light on the way to overcome structural fluctuation on the optimization of charge transport in molecular electronic materials. The point of singularity in the dispersion at an intermolecular distance of d â¼ 0.3 nm is deduced from the overall mobility assessment in condensed phases of conjugated molecules, suggesting key roles of intermolecular electronic coupling: the new concept of electronic conjugation. Exceptional electronic coupling with relatively high charge carrier mobility was also observed, particularly in 2D spatial arrangements of chiral molecules in contrast to 3D analogues, where the reduction of gravitational density of the molecular condensates was impacting DOS: the Wallach's rule. 2D electronic systems are strong candidates for the violation of the long-lasting Wallach's rule in terms of DOS.
RESUMO
Pentagon-heptagon embedded polycyclic aromatic hydrocarbons (PAHs) have aroused increasing attention in recent years due to their unique physicochemical properties. Here, for the first time, this report demonstrates a facile method for the synthesis of a novel B2 N2 -doped PAH (BN-2) containing two pairs of pentagonal and heptagonal rings in only two steps. In the solid state of BN-2, two different conformations, including saddle-shaped and up-down geometries, are observed. Through a combined spectroscopic and calculation study, the excited-state dynamics of BN-2 is well-investigated in this current work. The resultant pentagon-heptagon embedded B2 N2 -doped BN-2 displays both prompt fluorescence and long-lived delayed fluorescence components at room temperature, with the triplet excited-state lifetime in the microsecond time region (τ = 19 µs). The triplet-triplet annihilation is assigned as the mechanism for the observed long-lived delayed fluorescence. Computational analyses attributed this observation to the small energy separation between the singlet and triplet excited states, facilitating the intersystem crossing (ISC) process which is further validated by the ultrafast spectroscopic measurements.
RESUMO
To compare the setup accuracy of optical surface image (OSI) versus orthogonal x-ray images (2DkV) using cone beam computed tomography (CBCT) as ground truth for radiotherapy of left breast cancer in deep-inspiration breath-hold (DIBH). Ten left breast DIBH patients treated with volumetric modulated arc therapy (VMAT) were studied retrospectively. OSI, 2DkV, and CBCT were acquired weekly at treatment setup. OSI, 2DkV, and CBCT were registered to planning CT or planning DRR based on a breast surface region of interest (ROI), bony anatomy (chestwall and sternum), and both bony anatomy and breast surface, respectively. These registrations provided couch shifts for each imaging system. The setup errors, or the difference in couch shifts between OSI and CBCT were compared to those between 2DkV and CBCT. A second OSI was acquired during last beam delivery to evaluate intrafraction motion. The median absolute setup errors were (0.21, 0.27, 0.23 cm, 0.6°, 1.3°, 1.0°) for OSI, and (0.26, 0.24, 0.18 cm, 0.9°, 1.0°, 0.6°) for 2DkV in vertical, longitudinal and lateral translations, and in rotation, roll and pitch, respectively. None of the setup errors was significantly different between OSI and 2DkV. For both systems, the systematic and random setup errors were ≤0.6 cm and ≤1.5° in all directions. Nevertheless, larger setup errors were observed in some sessions in both systems. There was no correlation between OSI and CBCT whereas there was modest correlation between 2DkV and CBCT. The intrafraction motion in DIBH detected by OSI was small with median absolute translations <0.2 cm, and rotations ≤0.4°. Though OSI showed comparable and small setup errors as 2DkV, it showed no correlation with CBCT. We concluded that to achieve accurate setup for both bony anatomy and breast surface, daily 2DkV can't be omitted following OSI for left breast patients treated with DIBH VMAT.
Assuntos
Neoplasias da Mama , Radioterapia de Intensidade Modulada , Humanos , Feminino , Estudos Retrospectivos , Raios X , Tomografia Computadorizada de Feixe Cônico/métodos , Neoplasias da Mama/diagnóstico por imagem , Neoplasias da Mama/radioterapia , Planejamento da Radioterapia Assistida por Computador/métodos , Suspensão da RespiraçãoRESUMO
MOTIVATION: Convolutional neural networks (CNNs) have achieved great success in the areas of image processing and computer vision, handling grid-structured inputs and efficiently capturing local dependencies through multiple levels of abstraction. However, a lack of interpretability remains a key barrier to the adoption of deep neural networks, particularly in predictive modeling of disease outcomes. Moreover, because biological array data are generally represented in a non-grid structured format, CNNs cannot be applied directly. RESULTS: To address these issues, we propose a novel method, called PathCNN, that constructs an interpretable CNN model on integrated multi-omics data using a newly defined pathway image. PathCNN showed promising predictive performance in differentiating between long-term survival (LTS) and non-LTS when applied to glioblastoma multiforme (GBM). The adoption of a visualization tool coupled with statistical analysis enabled the identification of plausible pathways associated with survival in GBM. In summary, PathCNN demonstrates that CNNs can be effectively applied to multi-omics data in an interpretable manner, resulting in promising predictive power while identifying key biological correlates of disease. AVAILABILITY AND IMPLEMENTATION: The source code is freely available at: https://github.com/mskspi/PathCNN.
Assuntos
Glioblastoma , Humanos , Processamento de Imagem Assistida por Computador , Redes Neurais de Computação , SoftwareRESUMO
Composite films that consisted of C60 and well-exfoliated nanosheets of transition metal dichalcogenides (TMDs), such as MoS2 or WS2 , with a bulk heterojunction structure were easily fabricated onto a semiconducting SnO2 electrode via a two-step methodology: self-assembly into their composite aggregates by injection of a poor solvent into a good solvent with the dispersion, and subsequent electrophoretic deposition. Upon photoexcitation, the composites on SnO2 exhibited enhanced transient conductivity in comparison with single components of TMDs or C60 , which demonstrates that the bulk heterojunction nanostructure of TMD and C60 promoted the charge separation (CS). In addition, the decoration of the TMD nanosheets with C60 hindered the undesirable charge recombination (CR) between an electron in SnO2 and a hole in the TMD nanosheets. Owing to the accelerated CS and suppressed CR, photoelectrochemical devices based on the MoS2 -C60 and WS2 -C60 composites achieved remarkably improved incident photon-to-current efficiencies (IPCEs) as compared with the single-component films. Despite more suppressed CR in WS2 -C60 than MoS2 -C60 , the IPCE value of the device with WS2 -C60 was smaller than that with MoS2 -C60 owing to its inhomogeneous film structure.
RESUMO
PURPOSE: The purpose of this study was to evaluate the quality of automatically propagated contours of organs at risk (OARs) based on respiratory-correlated navigator-triggered four-dimensional magnetic resonance imaging (RC-4DMRI) for calculation of internal organ-at-risk volume (IRV) to account for intra-fractional OAR motion. METHODS AND MATERIALS: T2-weighted RC-4DMRI images were of 10 volunteers acquired and reconstructed using an internal navigator-echo surrogate and concurrent external bellows under an IRB-approved protocol. Four major OARs (lungs, heart, liver, and stomach) were delineated in the 10-phase 4DMRI. Two manual-contour sets were delineated by two clinical personnel and two automatic-contour sets were propagated using free-form deformable image registration. The OAR volume variation within the 10-phase cycle was assessed and the IRV was calculated as the union of all OAR contours. The OAR contour similarity between the navigator-triggered and bellows-rebinned 4DMRI was compared. A total of 2400 contours were compared to the most probable ground truth with a 95% confidence level (S95) in similarity, sensitivity, and specificity using the simultaneous truth and performance level estimation (STAPLE) algorithm. RESULTS: Visual inspection of automatically propagated contours finds that approximately 5-10% require manual correction. The similarity, sensitivity, and specificity between manual and automatic contours are indistinguishable (P > 0.05). The Jaccard similarity indexes are 0.92 ± 0.02 (lungs), 0.89 ± 0.03 (heart), 0.92 ± 0.02 (liver), and 0.83 ± 0.04 (stomach). Volume variations within the breathing cycle are small for the heart (2.6 ± 1.5%), liver (1.2 ± 0.6%), and stomach (2.6 ± 0.8%), whereas the IRV is much larger than the OAR volume by: 20.3 ± 8.6% (heart), 24.0 ± 8.6% (liver), and 47.6 ± 20.2% (stomach). The Jaccard index is higher in navigator-triggered than bellows-rebinned 4DMRI by 4% (P < 0.05), due to the higher image quality of navigator-based 4DMRI. CONCLUSION: Automatic and manual OAR contours from Navigator-triggered 4DMRI are not statistically distinguishable. The navigator-triggered 4DMRI image provides higher contour quality than bellows-rebinned 4DMRI. The IRVs are 20-50% larger than OAR volumes and should be considered in dose estimation.
Assuntos
Imageamento por Ressonância Magnética , Algoritmos , Humanos , Movimento (Física) , Planejamento da Radioterapia Assistida por Computador , Respiração , Estudos RetrospectivosRESUMO
Therapeutic hypothermia (TH) improves the neurological outcome in patients after cardiac arrest and neonatal hypoxic brain injury. We studied the safety and feasibility of mild TH in patients with poor-grade subarachnoid hemorrhage (SAH) after successful treatment. Patients were allocated randomly to either the TH group (34.5°C) or control group after successful clipping or coil embolization. Eleven patients received TH for 48 hours followed by 48 hours of slow rewarming. Vasospasm, delayed cerebral ischemia (DCI), functional outcome, mortality, and safety profiles were compared between groups. We enrolled 22 patients with poor-grade SAH (Hunt & Hess Scale 4, 5 and modified Fisher Scale 3, 4). In the TH group, 10 of 11 (90.9%) patients had a core body temperature of < 36°C for > 95% of the 48-hour treatment period. Fewer patients in the TH than control group (n = 11, each) had symptomatic vasospasms (18.1% vs. 36.4%, respectively) and DCI (36.3% vs. 45.6%, respectively), but these differences were not statistically significant. At 3 months, 54.5% of the TH group had a good-to-moderate functional outcome (0-3 on the modified Rankin Scale [mRS]) compared with 9.0% in the control group (P = 0.089). Mortality at 1 month was 36.3% in the control group compared with 0.0% in the TH group (P = 0.090). Mild TH is feasible and can be safely used in patients with poor-grade SAH. Additionally, it may reduce the risk of vasospasm and DCI, improving the functional outcomes and reducing mortality. A larger randomized controlled trial is warranted.
Assuntos
Hipotermia Induzida , Hemorragia Subaracnóidea/terapia , Adulto , Idoso , Temperatura Corporal , Isquemia Encefálica/etiologia , Angiografia por Tomografia Computadorizada , Feminino , Humanos , Hipotermia Induzida/efeitos adversos , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Estudos Prospectivos , Fatores de Risco , Índice de Gravidade de Doença , Hemorragia Subaracnóidea/mortalidade , Hemorragia Subaracnóidea/patologia , Taxa de Sobrevida , Tomografia Computadorizada por Raios X , Resultado do Tratamento , Vasoespasmo Intracraniano/etiologiaRESUMO
TumorPrism3D software was developed to segment brain tumors with a straightforward and user-friendly graphical interface applied to two- and three-dimensional brain magnetic resonance (MR) images. The MR images of 185 patients (103 males, 82 females) with glioblastoma multiforme were downloaded from The Cancer Imaging Archive (TCIA) to test the tumor segmentation performance of this software. Regions of interest (ROIs) corresponding to contrast-enhancing lesions, necrotic portions, and non-enhancing T2 high signal intensity components were segmented for each tumor. TumorPrism3D demonstrated high accuracy in segmenting all three tumor components in cases of glioblastoma multiforme. They achieved a better Dice similarity coefficient (DSC) ranging from 0.83 to 0.91 than 3DSlicer with a DSC ranging from 0.80 to 0.84 for the accuracy of segmented tumors. Comparative analysis with the widely used 3DSlicer software revealed TumorPrism3D to be approximately 37.4% faster in the segmentation process from initial contour drawing to final segmentation mask determination. The semi-automated nature of TumorPrism3D facilitates reproducible tumor segmentation at a rapid pace, offering the potential for quantitative analysis of tumor characteristics and artificial intelligence-assisted segmentation in brain MR imaging.
RESUMO
PURPOSE: Traditional methods of evaluating cardiotoxicity focus on radiation doses to the heart. Functional imaging has the potential to provide improved prediction for cardiotoxicity for patients with lung cancer. Fluorine-18 (18F) fluorodeoxyglucose (FDG)-positron emission tomography (PET)/computed tomography (CT) imaging is routinely obtained in a standard cancer staging workup. This work aimed to develop a radiomics model predicting clinical cardiac assessment using 18F-FDG PET/CT scans before thoracic radiation therapy. METHODS: Pretreatment 18F-FDG PET/CT scans from three study populations (N = 100, N = 39, N = 70) were used, comprising two single-institutional protocols and one publicly available data set. A clinician (V.J.) classified the PET/CT scans per clinical cardiac guidelines as no uptake, diffuse uptake, or focal uptake. The heart was delineated, and 210 novel functional radiomics features were selected to classify cardiac FDG uptake patterns. Training data were divided into training (80%)/validation (20%) sets. Feature reduction was performed using the Wilcoxon test, hierarchical clustering, and recursive feature elimination. Ten-fold cross-validation was carried out for training, and the accuracy of the models to predict clinical cardiac assessment was reported. RESULTS: From 202 of 209 scans, cardiac FDG uptake was scored as no uptake (39.6%), diffuse uptake (25.3%), and focal uptake (35.1%), respectively. Sixty-two independent radiomics features were reduced to nine clinically pertinent features. The best model showed 93% predictive accuracy in the training data set and 80% and 92% predictive accuracy in two external validation data sets. CONCLUSION: This work used an extensive patient data set to develop a functional cardiac radiomic model from standard-of-care 18F-FDG PET/CT scans, showing good predictive accuracy. The radiomics model has the potential to provide an automated method to predict existing cardiac conditions and provide an early functional biomarker to identify patients at risk of developing cardiac complications after radiotherapy.
Assuntos
Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/diagnóstico por imagem , Neoplasias Pulmonares/radioterapia , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada/métodos , Fluordesoxiglucose F18 , Radiômica , Cardiotoxicidade , Tomografia por Emissão de PósitronsRESUMO
PURPOSE: This study aims to quantify the variation in dose-volume histogram (DVH) and normal tissue complication probability(NTCP) metrics for head-and-neck (HN) cancer patients when alternative organ-at-risk(OAR) delineations are used for treatment planning and for treatment plan evaluation. We particularly focus on the effects of daily patient positioning/setup variations(SV) in relation to treatment technique and delineation variability. MATERIALS AND METHODS: We generated two-arc VMAT, 5-beam IMRT, and 9-beam IMRT treatment plans for a cohort of 209 HN patients. These plans incorporated five different OAR delineation sets, including manual and four automated algorithms. Each treatment plan was assessed under various simulated per-fraction patient setup uncertainties, evaluating the potential clinical impacts through DVH and NTCP metrics. RESULTS: The study demonstrates that increasing SV generally reduces differences in DVH metrics between alternative delineations. However, in contrast, differences in NTCP metrics tend to increase with higher setup variability. This pattern is observed consistently across different treatment plans and delineator combinations, illustrating the intricate relationship between SV and delineation accuracy. Additionally, the need for delineation accuracy in treatment planning is shown to be case-specific and dependent on factors beyond geometric variations. CONCLUSIONS: The findings highlight the necessity for comprehensive Quality Assurance programs in radiotherapy, incorporating both dosimetric impact analysis and geometric variation assessment to ensure optimal delineation quality. The study emphasizes the complex dynamics of treatment planning in radiotherapy, advocating for personalized, case-specific strategies in clinical practice to enhance patient care quality and efficacy in the face of varying SV and delineation accuracies.
RESUMO
Despite dramatic improvements in the electronic characteristics of organic semiconductors, the low operational stability of organic field-effect transistors (OFETs) hinders their direct use in practical applications. Although the literature contains numerous reports on the effects of water on the operational stability of OFETs, the underlying mechanisms of trap generation induced by water remain unclear. Here, a protonation-induced trap generation of organic semiconductors is proposed as a possible origin of the operational instability in organic field-effect transistors. Spectroscopic and electronic investigation techniques combined with simulations reveal that the direct protonation of organic semiconductors by water during operation may be responsible for the trap generation induced by bias stress; this phenomenon is independent of the trap generation at an insulator surface. In addition, the same feature occurred in small-bandgap polymers with fused thiophene rings irrespective of their crystalline ordering, implying the generality of protonation induced trap generation in various polymer semiconductors with a small bandgap. The finding of the trap-generation process provides new perspectives for achieving greater operational stability of organic field-effect transistors.
RESUMO
Lung adenocarcinoma (ADC) is the most common non-small cell lung cancer. Surgical resection is the primary treatment for early-stage lung ADC while lung-sparing surgery is an alternative for non-aggressive cases. Identifying histopathologic subtypes before surgery helps determine the optimal surgical approach. Predominantly solid or micropapillary (MIP) subtypes are aggressive and associated with a higher likelihood of recurrence and metastasis and lower survival rates. This study aims to non-invasively identify these aggressive subtypes using preoperative 18F-FDG PET/CT and diagnostic CT radiomics analysis. We retrospectively studied 119 patients with stage I lung ADC and tumors ≤ 2 cm, where 23 had aggressive subtypes (18 solid and 5 MIPs). Out of 214 radiomic features from the PET/CT and CT scans and 14 clinical parameters, 78 significant features (3 CT and 75 PET features) were identified through univariate analysis and hierarchical clustering with minimized feature collinearity. A combination of Support Vector Machine classifier and Least Absolute Shrinkage and Selection Operator built predictive models. Ten iterations of 10-fold cross-validation (10 ×10-fold CV) evaluated the model. A pair of texture feature (PET GLCM Correlation) and shape feature (CT Sphericity) emerged as the best predictor. The radiomics model significantly outperformed the conventional predictor SUVmax (accuracy: 83.5% vs. 74.7%, p = 9e-9) and identified aggressive subtypes by evaluating FDG uptake in the tumor and tumor shape. It also demonstrated a high negative predictive value of 95.6% compared to SUVmax (88.2%, p = 2e-10). The proposed radiomics approach could reduce unnecessary extensive surgeries for non-aggressive subtype patients, improving surgical decision-making for early-stage lung ADC patients.
RESUMO
Point-of-care ultrasound (POCUS) is a rapidly developing technology that has the potential to revolutionize emergency and critical care medicine. The use of POCUS can improve patient care by providing real-time clinical information. However, appropriate usage and proper training are crucial to ensure patient safety and reliability. This article discusses the various applications of POCUS in emergency and critical care medicine, the importance of training and education, and the future of POCUS in medicine.
RESUMO
Spiculations/lobulations, sharp/curved spikes on the surface of lung nodules, are good predictors of lung cancer malignancy and hence, are routinely assessed and reported by radiologists as part of the standardized Lung-RADS clinical scoring criteria. Given the 3D geometry of the nodule and 2D slice-by-slice assessment by radiologists, manual spiculation/lobulation annotation is a tedious task and thus no public datasets exist to date for probing the importance of these clinically-reported features in the SOTA malignancy prediction algorithms. As part of this paper, we release a large-scale Clinically-Interpretable Radiomics Dataset, CIRDataset, containing 956 radiologist QA/QC'ed spiculation/lobulation annotations on segmented lung nodules from two public datasets, LIDC-IDRI (N=883) and LUNGx (N=73). We also present an end-to-end deep learning model based on multi-class Voxel2Mesh extension to segment nodules (while preserving spikes), classify spikes (sharp/spiculation and curved/lobulation), and perform malignancy prediction. Previous methods have performed malignancy prediction for LIDC and LUNGx datasets but without robust attribution to any clinically reported/actionable features (due to known hyperparameter sensitivity issues with general attribution schemes). With the release of this comprehensively-annotated CIRDataset and end-to-end deep learning baseline, we hope that malignancy prediction methods can validate their explanations, benchmark against our baseline, and provide clinically-actionable insights. Dataset, code, pretrained models, and docker containers are available at https://github.com/nadeemlab/CIR.
RESUMO
Spiculations are important predictors of lung cancer malignancy, which are spikes on the surface of the pulmonary nodules. In this study, we proposed an interpretable and parameter-free technique to quantify the spiculation using area distortion metric obtained by the conformal (angle-preserving) spherical parameterization. We exploit the insight that for an angle-preserved spherical mapping of a given nodule, the corresponding negative area distortion precisely characterizes the spiculations on that nodule. We introduced novel spiculation scores based on the area distortion metric and spiculation measures. We also semi-automatically segment lung nodule (for reproducibility) as well as vessel and wall attachment to differentiate the real spiculations from lobulation and attachment. A simple pathological malignancy prediction model is also introduced. We used the publicly-available LIDC-IDRI dataset pathologists (strong-label) and radiologists (weak-label) ratings to train and test radiomics models containing this feature, and then externally validate the models. We achieved AUC = 0.80 and 0.76, respectively, with the models trained on the 811 weakly-labeled LIDC datasets and tested on the 72 strongly-labeled LIDC and 73 LUNGx datasets; the previous best model for LUNGx had AUC = 0.68. The number-of-spiculations feature was found to be highly correlated (Spearman's rank correlation coefficient ρ=0.44) with the radiologists' spiculation score. We developed a reproducible and interpretable, parameter-free technique for quantifying spiculations on nodules. The spiculation quantification measures was then applied to the radiomics framework for pathological malignancy prediction with reproducible semi-automatic segmentation of nodule. Using our interpretable features (size, attachment, spiculation, lobulation), we were able to achieve higher performance than previous models. In the future, we will exhaustively test our model for lung cancer screening in the clinic.
Assuntos
Neoplasias Pulmonares , Nódulo Pulmonar Solitário , Detecção Precoce de Câncer , Humanos , Pulmão/diagnóstico por imagem , Neoplasias Pulmonares/diagnóstico por imagem , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios XRESUMO
PURPOSE: To quantify the error detection power of a new treatment delivery error detection method. The method validates monitor unit (MU) resolved beam apertures using real-time EPID images. METHODS: The on-board EPID imager was used to measure cine-EPID (~10 Hz) images for 27 beams from 15 VMAT/SBRT clinical treatment plans and five nonclinical plans. For each frame acquisition, planned apertures were interpolated from the treatment plan multileaf collimator (MLC) positions expected during the frame acquisition interval. Inaccurate deliveries were identified by monitoring in-aperture missed fluence and out-of-aperture excess fluence beyond a specified buffer. Delivery errors were simulated by perturbing the planned MLC positions before comparison with nonperturbed measured apertures. Systematic 1-5 mm MLC leaf shifts were used to train a logistic regression model to determine the error detection threshold. Model accuracy was monitored using tenfold cross-validation. The model's error detection ability was tested with other error modes: plan control point (CP) weight perturbations, collimator rotations, random MLC leaf position errors, EPID imager shift, and stuck MLC leaf. The error detection accuracy was evaluated using the Matthews correlation coefficient (MCC) and the false positive rate (FPR). Per-beam error thresholds of >1, >5, and >10% errant frames were tested to label per-beam errors. The model also was tested for its ability to distinguish five cases with highly similar plans and compared with gamma analysis. RESULTS: Delivery errors were detected by monitoring intended per-frame images with a 2 mm MLC buffer. Frame-by-frame aperture errors were identified with an optimal threshold of 0.3% of the expected aperture area. The per-frame FPR was 0.02%. The MCC was 1.00 (perfect classification) for detection based on 1% of frames for random CP weight shift, 3 mm random MLC shifts, 90° and 180° collimator rotations, and an MLC leaf stuck after 10% of the beam delivery. The MCC for 2°, 4°, and 8° collimator rotation were 0.53, 0.76, and 0.96, respectively, for the 1% of beam delivery threshold. The 3 mm EPID shift had poor detection, with a minimum MCC of 0.14. The highly similar plans were reliably detected by the aperture check but were not detectable with gamma analysis. CONCLUSION: The high error detection sensitivity and low FPR makes the aperture check error detection method well suited to pretreatment and during-treatment beam delivery quality assurance (QA). The aperture check detects subtle beam delivery errors, including those resulting from MLC leaf positioning deviations, CP MU shifts, and stuck MLC leaves. Furthermore, the method can distinguish between highly similar treatment plans. Since the aperture check method monitors for the aperture shapes over a given MU interval, it is also sensitive to errors in MU per CP, without requiring dosimetric calibration of the EPID. The aperture check is one part of a Swiss cheese error detection scheme, which provides redundant error testing of multiple error modes, including nonaperture related errors. The rapid error detection, at 1% of a beam's delivery, make the aperture check a potential candidate for QA of on-line adaptive radiotherapy, or other situations in which pretreatment delivery QA is impractical.
Assuntos
Radioterapia de Intensidade Modulada , Raios gama , Radiometria , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por ComputadorRESUMO
PURPOSE: Manual delineation (MD) of organs at risk (OAR) is time and labor intensive. Auto-delineation (AD) can reduce the need for MD, but because current algorithms are imperfect, manual review and modification is still typically used. Recognizing that many OARs are sufficiently far from important dose levels that they do not pose a realistic risk, we hypothesize that some OARs can be excluded from MD and manual review with no clinical effect. The purpose of this study was to develop a method that automatically identifies these OARs and enables more efficient workflows that incorporate AD without degrading clinical quality. METHODS AND MATERIALS: Preliminary dose map estimates were generated for n = 10 patients with head and neck cancers using only prescription and target-volume information. Conservative estimates of clinical OAR objectives were computed using AD structures with spatial expansion buffers to account for potential delineation uncertainties. OARs with estimated dose metrics below clinical tolerances were deemed low priority and excluded from MD and/or manual review. Final plans were then optimized using high-priority MD OARs and low-priority AD OARs and compared with reference plans generated using all MD OARs. Multiple different spatial buffers were used to accommodate different potential delineation uncertainties. RESULTS: Sixty-seven out of 201 total OARs were identified as low-priority using the proposed methodology, which permitted a 33% reduction in structures requiring manual delineation/review. Plans optimized using low-priority AD OARs without review or modification met all planning objectives that were met when all MD OARs were used, indicating clinical equivalence. CONCLUSIONS: Prioritizing OARs using estimated dose distributions allowed a substantial reduction in required MD and review without affecting clinically relevant dosimetry.
RESUMO
Organometal halide perovskite (OHP) solar cells have been intensively studied because of their promising optoelectronic features, which has resulted in high power conversion efficiencies >23 %. Although OHP solar cells exhibit high power conversion efficiencies, their relatively poor stability is a significant obstacle to their practical use. We report that the chemical stability of OHP solar cells with respect to both moisture and heat can be improved by adding a small amount of Ag to the precursor. Ag doping increases the size of the OHP grains and reduces the size of the amorphous intergranular regions at the grain boundaries, and thereby hinders the infiltration of moisture into the OHP films and their thermal degradation. Quantum mechanical simulation reveals that Ag doping increases the energies of both the hydration reaction and heat-induced vacancy formation in OHP crystals. This procedure also improves the power conversion efficiencies of the resulting solar cells.
RESUMO
PURPOSE: Low-dose CT screening allows early lung cancer detection, but is affected by frequent false positive results, inter/intra observer variation and uncertain diagnoses of lung nodules. Radiomics-based models have recently been introduced to overcome these issues, but limitations in demonstrating their generalizability on independent datasets are slowing their introduction to clinic. The aim of this study is to evaluate two radiomics-based models to classify malignant pulmonary nodules in low-dose CT screening, and to externally validate them on an independent cohort. The effect of a radiomics features harmonization technique is also investigated to evaluate its impact on the classification of lung nodules from a multicenter data. METHODS: Pulmonary nodules from two independent cohorts were considered in this study; the first cohort (110 subjects, 113 nodules) was used to train prediction models, and the second cohort (72 nodules) to externally validate them. Literature-based radiomics features were extracted and, after feature selection, used as predictive variables in models for malignancy identification. An in-house prediction model based on artificial neural network (ANN) was implemented and evaluated, along with an alternative model from the literature, based on a support vector machine (SVM) classifier coupled with a least absolute shrinkage and selection operator (LASSO). External validation was performed on the second cohort to evaluate models' generalization ability. Additionally, the impact of the Combat harmonization method was investigated to compensate for multicenter datasets variabilities. A new training of the models based on harmonized features was performed on the first cohort, then tested separately on the harmonized and non-harmonized features of the second cohort. RESULTS: Preliminary results showed a good accuracy of the investigated models in distinguishing benign from malignant pulmonary nodules with both sets of radiomics features (i.e., non-harmonized and harmonized). The performance of the models, quantified in terms of Area Under the Curve (AUC), was > 0.89 in the training set and > 0.82 in the external validation set for all the investigated scenarios, outperforming the clinical standard (AUC of 0.76). Slightly higher performance was observed for the SVM-LASSO model than the ANN in the external dataset, although they did not result significantly different. For both harmonized and non-harmonized features, no statistical difference was found between Receiver operating characteristic (ROC) curves related to training and test set for both models. CONCLUSIONS: Although no significant improvements were observed when applying the Combat harmonization method, both in-house and literature-based models were able to classify lung nodules with good generalization to an independent dataset, thus showing their potential as tools for clinical decision-making in lung cancer screening.
Assuntos
Neoplasias Pulmonares , Nódulos Pulmonares Múltiplos , Detecção Precoce de Câncer , Humanos , Pulmão , Neoplasias Pulmonares/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
Organic semiconductors are usually polycyclic aromatic hydrocarbons and their analogs containing heteroatom substitution. Bioinspired materials chemistry of organic electronics promises new charge transport mechanism and specific molecular recognition with biomolecules. We discover organic semiconductors from deoxyribonucleic acid topoisomerase inhibitors, featuring conjugated backbone decorated with hydrogen-bonding moieties distinct from common organic semiconductors. Using ellipticine as a model compound, we find that hydrogen bonds not only guide polymorph assembly, but are also critical to forming efficient charge transport pathways along π-conjugated planes when at a low dihedral angle by shortening the end-to-end distance of adjacent π planes. In the π-π stacking and hydrogen-bonding directions, the intrinsic, short-range hole mobilities reach as high as 6.5 cm2V-1s-1 and 4.2 cm2V-1s-1 measured by microwave conductivity, and the long-range apparent hole mobilities are up to 1.3 × 10-3 cm2V-1s-1 and 0.4 × 10-3 cm2V-1s-1 measured in field-effect transistors. We further demonstrate printed transistor devices and chemical sensors as potential applications.