Color Stability and Mechanical Properties of Two Commonly Used Silicone Elastomers with e-Skin and Reality Coloring Systems.

PURPOSE: To evaluate the color stability and mechanical properties of two commonly used maxillofacial silicone elastomers after addition of pigments and opacifiers and before and after artificial aging. MATERIALS AND METHODS: This study evaluated two maxillofacial silicone elastomers: A-2000 and M511. Two different pigment and opacifier systems (e-Skin and Reality Series) were used with the elastomers. Control groups (no pigment or opacifier) and experimental groups (each with subgroups containing additional pigments and/ or opacifiers) were fabricated for each of the silicone elastomers. A total of 51 specimens were evaluated for color stability, and 100 for mechanical properties. A spectrophotometer was used to assess CIE L*a*b* values before and after aging. CIELAB 50:50% perceptibility threshold (ΔE* = 1.1) and acceptability threshold (ΔE* = 3.0) were used to interpret color changes. A durometer and universal testing machine were used to evaluate the mechanical properties. ANOVA and Fisher least significant difference (LSD) test were performed to determine the statistical significance of the results (P < .05). RESULTS: Significant differences in color measurements (ΔE*) were found for all silicone groups following artificial aging (P < .05). ΔE* values for the mixed pigment/opacifier subgroups of both elastomers were below the perceptibility threshold. Additionally, after aging, the hardness, tear strength, and tensile strength significantly increased for all silicone groups (P < .05), while percent elongation significantly decreased (P < .05). CONCLUSION: Artificial aging affected the color stability and mechanical properties of the pigmented silicone elastomers with added opacifier. Overall, A-2000 with e-Skin group displayed the most color stability, with its mechanical properties being the least affected by artificial aging.

Conducting polymer-based multilayer films for instructive biomaterial coatings.

AIM: To demonstrate the design, fabrication and testing of conformable conducting biomaterials that encourage cell alignment. MATERIALS & METHODS: Thin conducting composite biomaterials based on multilayer films of poly(3.4-ethylenedioxythiophene) derivatives, chitosan and gelatin were prepared in a layer-by-layer fashion. Fibroblasts were observed with fluorescence microscopy and their alignment (relative to the dipping direction and direction of electrical current passed through the films) was determined using ImageJ. RESULTS: Fibroblasts adhered to and proliferated on the films. Fibroblasts aligned with the dipping direction used during film preparation and this was enhanced by a DC current. CONCLUSION: We report the preparation of conducting polymer-based films that enhance the alignment of fibroblasts on their surface which is an important feature of a variety of tissues.

Electrical stimulation of human mesenchymal stem cells on biomineralized conducting polymers enhances their differentiation towards osteogenic outcomes.

Tissue scaffolds allowing the behaviour of the cells that reside on them to be controlled are of particular interest for tissue engineering. Herein we describe biomineralized conducting polymer-based bone tissue scaffolds that facilitate the electrical stimulation of human mesenchymal stem cells, resulting in enhancement of their differentiation towards osteogenic outcomes.

Instructive Conductive 3D Silk Foam-Based Bone Tissue Scaffolds Enable Electrical Stimulation of Stem Cells for Enhanced Osteogenic Differentiation.

Stimuli-responsive materials enabling the behavior of the cells that reside within them to be controlled are vital for the development of instructive tissue scaffolds for tissue engineering. Herein, we describe the preparation of conductive silk foam-based bone tissue scaffolds that enable the electrical stimulation of human mesenchymal stem cells (HMSCs) to enhance their differentiation toward osteogenic outcomes.

Electric field stimulation through a biodegradable polypyrrole-co-polycaprolactone substrate enhances neural cell growth.

Nerve guidance conduits (NGCs) are FDA-approved devices used to bridge gaps across severed nerve cables and help direct axons sprouting from the proximal end toward the distal stump. In this article, we present the development of a novel electrically conductive, biodegradable NGC made from a polypyrrole-block-polycaprolactone (PPy-PCL) copolymer material laminated with poly(lactic-co-glycolic acid) (PLGA). The PPy-PCL has a bulk conductivity ranging 10-20 S/cm and loses 40 wt % after 7 months under physiologic conditions. Dorsal root ganglia (DRG) grown on flat PPy-PCL/PLGA material exposed to direct current electric fields (EF) of 100 mV/cm for 2 h increased axon growth by 13% (± 2%) toward either electrode of a 2-electrode setup, compared with control grown on identical substrates without EF exposure. Alternating current increased axon growth by 21% (±3%) without an observable directional preference, compared with the same control group. The results from this study demonstrate PLGA-coated PPy-PCL is a unique biodegradable material that can deliver substrate EF stimulation to improve axon growth for peripheral nerve repair.

Biodegradable electroactive polymers for electrochemically-triggered drug delivery.

We report biodegradable electroactive polymer (EAP)-based materials and their application as drug delivery devices. Copolymers composed of oligoaniline-based electroactive blocks linked to either polyethylene glycol or polycaprolactone blocks via ester bonds were synthesized in three steps from commercially available starting materials and isolated without the need for column chromatography. The physicochemical and electrochemical properties of the polymers were characterized with a variety of techniques. The ability of the polymers to deliver the anti-inflammatory drug dexamethasone phosphate on the application of electrochemical stimuli was studied spectroscopically. Films of the polymers were shown to be degradable and cell adhesive in vitro. Such EAP-based materials have prospects for integration in implantable fully biodegradable/bioerodible EAP-based drug delivery devices that are capable of controlling the chronopharmacology of drugs for future clinical application.

Electric field stimulation through a substrate influences Schwann cell and extracellular matrix structure.

OBJECTIVE: Electric field (EF) stimulation has been used to cue cell growth for tissue engineering applications. In this study, we explore the electrical parameters and extracellular mechanisms that elicit changes in cell behavior when stimulated through the substrate. APPROACH: Rat Schwann cell morphology was compared when exposed to EF through the media or a conductive indium tin oxide substrate. Ionic and structural effects were then analyzed on Matrigel and collagen I, respectively. MAIN RESULTS: When stimulating through media, cells had greater alignment perpendicular to the EF with higher current densities (106 mA cm(-2) at 245 mV mm(-1)), and reached maximum alignment within 8 h. Stimulation through the substrate with EF (up to 110 mV mm(-1)) did not affect Schwann cell orientation, however the EF caused extracellular matrix (ECM) coatings on substrates to peel away, suggesting EF can physically change the ECM. Applying alternating current (ac) 2-1000 Hz signals through the media or substrate both caused cells to flatten and protrude many processes, without preferential alignment. Matrigel exposed to a substrate EF of 10 mV mm(-1) for 2 h had a greater calcium concentration near the cathode, but quickly dissipated when the EF was removed. Schwann cells seeded 7 d after gels were exposed to substrate EF still aligned perpendicular to the EF direction. Microscopy of collagen I exposed to substrate EF shows alignment and bundling of fibrils. SIGNIFICANCE: These findings demonstrate EF exposure can control Schwann cell alignment and morphology, change ECM bulk/surface architecture, and align ECM structures.