RESUMO
Successful doping of Eu3+ ions into ZnO nanocrystals has been realized by using a low temperature wet chemical doping technique. The substitution of Eu3+ for Zn2+ is shown to be dominant in the Eu-doped ZnO nanocrystals by analyzing the X-ray diffraction patterns, transmission electron microscopy images, Raman and selectively excited photoluminescence spectra. Measurement of the luminescence from the samples shows that the excited ZnO transfers the excited energy efficiently to the doped Eu3+ ions, giving rise to efficient emission at red spectral region. The red emission quantum yield is measured to be 31% at room temperature. The temperature dependence of photoluminescence and the photoluminescence excitation spectra have also been investigated, showing strong energy coupling between the ZnO host and Eu3+ ions through free and bound excitons. The result indicates that Eu3+ ion-doped ZnO nanocrystals are promising light-conversion materials and have potential application in highly distinguishable emissive flat panel display and LED backlights.
RESUMO
We report a facile method of preparing few-layer graphene nanosheets (FLGs), which can be soluble in ethanol. Atomic force microscopy and high-resolution transmission electron microscopy studies reveal that FLGs have average thicknesses in the range of 2.6-2.8 nm, corresponding to 8-9 layers. A graphene/nafion composite film has a sheet resistance of 9.70 kΩ/sq at the transmittance of 74.5% (at 550 nm) while the nafion film on polyethylene terephthalate has a sheet resistance of 128 kΩ/sq at transmittance of 90.0%. For the cycling/bending test, almost no change in resistance was exhibited when the film was bent at an angle up to 140°, and no obvious deviation in resistance could be found after 100 bending cycles was applied. In addition, an FLGs-poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) composite layer was demonstrated as the effective hole transporting layer to improve the hole transporting ability in an organic photovoltaic device, with which the power conversion efficiency was enhanced from 3.10% to 3.70%. The results demonstrated the promising applications of FLGs on graphene-based electronics, such as transparent electrode and flexible conducting film.
RESUMO
Strain-sensitive Ba x Sr1-x TiO3 perovskite systems are widely used because of their superior nonlinear dielectric behaviors. In this research, new heterostructures including paraelectric Ba0.5Sr0.5TiO3 (BSTO) and ferroelectric BaTiO3 (BTO) materials were epitaxially fabricated on flexible muscovite substrate. Through simple bending, the application of mechanical force can regulate the dielectric constant of BSTO from -77 to 36% and the channel current of BTO-based ferroelectric field effect transistor by two orders. The detailed mechanism was studied through the exploration of phase transition and determination of band structure. In addition, the phase-field simulations were implemented to provide theoretical support. This research opens a new avenue for mechanically controllable components based on high-quality oxide heteroepitaxy.
RESUMO
Taper- and rodlike Si nanowires (SiNWs) are synthesized successfully on Si and Si(0.8)Ge(0.2) substrates. The growth mechanisms of taper- and rodlike SiNWs are proposed to be oxide-assisted growth (OAG) and vapor-liquid-solid (VLS) growth, respectively. For taperlike SiNWs annealed at 1200 degrees C for 3 h, the emission peaks are found at 772, 478, and 413 nm. On the other hand, for rodlike SiNWs annealed at 1200 degrees C for 4 h, emission peaks are found at 783, 516, and 413 nm. From the field-emission measurements, the taperlike Si nanowires exhibit superior field-emission behavior with a turn-on field of 6.3-7.3 V/mum. The field enhancement, beta, has been estimated to be 700 and 1000 at low and high fields, respectively. The excellent field-emission characteristics are attributed to the perfect crystalline structure and the taperlike geometry of the Si nanowires.