Interference of tritrophic (grape × medfly × parasitoid) interactions by mineral and biomaterial films.

Fruit fly infestation is one of the main obstacles to the exportation of fresh agricultural produce. Films of mineral particles and biomaterials have the potential to protect fruits against tephritid fruit fly infestation. The present study evaluated the effects of particle films on the tritrophic interactions of grape (Vitis vinifera L.), the fruit fly Ceratitis capitata (Wiedemann) and the parasitoid Diachasmimorpha longicaudata (Ashmead) under semi-field conditions. Grapes were biometrically characterised (i.e. colour, firmness, mass, length and diameter), treated with mineral particles, biomaterials or distilled water (control), and then used in oviposition and parasitism bioassays. In the oviposition bioassay, the treated grapes were exposed to 50 C. capitata pairs in field cages, and after 48 h, the punctures and eggs on each fruit were counted. In the parasitism bioassay, treated grapes were artificially infested with third-instar C. capitata larvae (two per fruit), exposed (2 h) to 50 D. longicaudata pairs in field cages to determine parasitism index, larval and pupal viabilities and number of flies and parasitoids emerged. Treatment with the mineral film affected fruit colour and reduced C. capitata oviposition but failed to significantly affect the parasitism capacity of D. longicaudata. The ability of the parasitoid to locate and parasitise C. capitata larvae in kaolin-coated fruits suggests that kaolin films could be used in conjunction with biological agents to control fruit flies.

Natural parasitism of the coffee leaf miner: climate factors, insecticide, and landscape affecting parasitoid diversity and their ecosystem services in coffee agroecosystems.

Climate factors, pesticides, and landscape in coffee agroecosystems directly affect the populations of the coffee leaf miner and its parasitoids. This study aimed to investigate the effects of climate factors, insecticide use, and landscape on natural parasitism, parasitoid diversity, and infestation of L. coffeella in coffee plantations in the Planalto region, Bahia, Brazil. Mined leaves were collected monthly in six coffee plantations with varying edge density, vegetation cover, landscape diversity in scales of 500 to 3000 m of radius, insecticide use, and climate factors. Closterocerus coffeellae, and Proacrias coffeae (Eulophidae) predominated in the pest's natural parasitism. Our record is the first for the occurrence of Stiropius reticulatus, Neochrysocharis sp. 1, Neochrysocharis sp. 2, and Zagrammosoma sp. in Bahia. Higher temperature and larger forest cover increased the coffee leaf miner infestation. Higher rainfall values, insecticide use, and landscape diversity decreased the pest infestations. Natural parasitism and species diversity are favoured by increase in temperature, forest cover, and edge density, while increase in rainfall, insecticide use, and landscape diversity lead them to decrease.The natural parasitism and diversity of parasitoid species of the coffee leaf miner have been enhancing in the areas with greater forest cover and edge density associated with low use of insecticides. The areas composed of different lands with annual croplands surrounding the coffee plantations showed less natural parasitism and parasitoid species diversity. The ecosystem services provided by C. coffeellae and P. coffeae in coffee crops areas require conservation and these species are potential bioproducts for applied biological control programmes.

Hybrid Digital-Droplet Microfluidic Chip for Applications in Droplet Digital Nucleic Acid Amplification: Design, Fabrication and Characterization.

Microfluidic-based platforms have become a hallmark for chemical and biological assays, empowering micro- and nano-reaction vessels. The fusion of microfluidic technologies (digital microfluidics, continuous-flow microfluidics, and droplet microfluidics, just to name a few) presents great potential for overcoming the inherent limitations of each approach, while also elevating their respective strengths. This work exploits the combination of digital microfluidics (DMF) and droplet microfluidics (DrMF) on a single substrate, where DMF enables droplet mixing and further acts as a controlled liquid supplier for a high-throughput nano-liter droplet generator. Droplet generation is performed at a flow-focusing region, operating on dual pressure: negative pressure applied to the aqueous phase and positive pressure applied to the oil phase. We evaluate the droplets produced with our hybrid DMF-DrMF devices in terms of droplet volume, speed, and production frequency and further compare them with standalone DrMF devices. Both types of devices enable customizable droplet production (various volumes and circulation speeds), yet hybrid DMF-DrMF devices yield more controlled droplet production while achieving throughputs that are similar to standalone DrMF devices. These hybrid devices enable the production of up to four droplets per second, which reach a maximum circulation speed close to 1540 µm/s and volumes as low as 0.5 nL.

A Digital Microfluidics Platform for Loop-Mediated Isothermal Amplification Detection.

Digital microfluidics (DMF) arises as the next step in the fast-evolving field of operation platforms for molecular diagnostics. Moreover, isothermal schemes, such as loop-mediated isothermal amplification (LAMP), allow for further simplification of amplification protocols. Integrating DMF with LAMP will be at the core of a new generation of detection devices for effective molecular diagnostics at point-of-care (POC), providing simple, fast, and automated nucleic acid amplification with exceptional integration capabilities. Here, we demonstrate for the first time the role of coupling DMF and LAMP, in a dedicated device that allows straightforward mixing of LAMP reagents and target DNA, as well as optimum temperature control (reaction droplets undergo a temperature variation of just 0.3 °C, for 65 °C at the bottom plate). This device is produced using low-temperature and low-cost production processes, adaptable to disposable and flexible substrates. DMF-LAMP is performed with enhanced sensitivity without compromising reaction efficacy or losing reliability and efficiency, by LAMP-amplifying 0.5 ng/µL of target DNA in just 45 min. Moreover, on-chip LAMP was performed in 1.5 µL, a considerably lower volume than standard bench-top reactions.

Digital Microfluidics for Nucleic Acid Amplification.

Digital Microfluidics (DMF) has emerged as a disruptive methodology for the control and manipulation of low volume droplets. In DMF, each droplet acts as a single reactor, which allows for extensive multiparallelization of biological and chemical reactions at a much smaller scale. DMF devices open entirely new and promising pathways for multiplex analysis and reaction occurring in a miniaturized format, thus allowing for healthcare decentralization from major laboratories to point-of-care with accurate, robust and inexpensive molecular diagnostics. Here, we shall focus on DMF platforms specifically designed for nucleic acid amplification, which is key for molecular diagnostics of several diseases and conditions, from pathogen identification to cancer mutations detection. Particular attention will be given to the device architecture, materials and nucleic acid amplification applications in validated settings.

Parylene C as a Multipurpose Material for Electronics and Microfluidics.

Poly(p-xylylene) derivatives, widely known as Parylenes, have been considerably adopted by the scientific community for several applications, ranging from simple passive coatings to active device components. Here, we explore the thermal, structural, and electrical properties of Parylene C, and further present a variety of electronic devices featuring this polymer: transistors, capacitors, and digital microfluidic (DMF) devices. We evaluate transistors produced with Parylene C as a dielectric, substrate, and encapsulation layer, either semitransparent or fully transparent. Such transistors exhibit steep transfer curves and subthreshold slopes of 0.26 V/dec, negligible gate leak currents, and fair mobilities. Furthermore, we characterize MIM (metal-insulator-metal) structures with Parylene C as a dielectric and demonstrate the functionality of the polymer deposited in single and double layers under temperature and AC signal stimuli, mimicking the DMF stimuli. Applying temperature generally leads to a decrease in the capacitance of the dielectric layer, whereas applying an AC signal leads to an increase in said capacitance for double-layered Parylene C only. By applying the two stimuli, the capacitance seems to suffer from a balanced influence of both the separated stimuli. Lastly, we demonstrate that DMF devices with double-layered Parylene C allow for faster droplet motion and enable long nucleic acid amplification reactions.

Open-source tool for real-time and automated analysis of droplet-based microfluidic.

Droplet-based microfluidic technology is a powerful tool for generating large numbers of monodispersed nanoliter-sized droplets for ultra-high throughput screening of molecules or single cells. Yet further progress in the development of methods for the real-time detection and measurement of passing droplets is needed for achieving fully automated systems and ultimately scalability. Existing droplet monitoring technologies are either difficult to implement by non-experts or require complex experimentation setups. Moreover, commercially available monitoring equipment is expensive and therefore limited to a few laboratories worldwide. In this work, we validated for the first time an easy-to-use, open-source Bonsai visual programming language to accurately measure in real-time droplets generated in a microfluidic device. With this method, droplets are found and characterized from bright-field images with high processing speed. We used off-the-shelf components to achieve an optical system that allows sensitive image-based, label-free, and cost-effective monitoring. As a test of its use we present the results, in terms of droplet radius, circulation speed and production frequency, of our method and compared its performance with that of the widely-used ImageJ software. Moreover, we show that similar results are obtained regardless of the degree of expertise. Finally, our goal is to provide a robust, simple to integrate, and user-friendly tool for monitoring droplets, capable of helping researchers to get started in the laboratory immediately, even without programming experience, enabling analysis and reporting of droplet data in real-time and closed-loop experiments.

Efficacy of disinfection procedures performed prior to regenerative endodontic therapy: An integrative review.

The aim of this integrative review was to identify whether the disinfection procedures performed prior to regenerative endodontic treatment were effective on biofilm removal from the root canals. The research was based on PubMed, Latin American and Caribbean Health Sciences Literature (Lilacs) and Scientific Electronic Library Online (SciELO) databases. Four articles were selected; one of the studies was in vivo and the others ex vivo. Different disinfection procedures were studied, characterised mainly by the use of intracanal medication, highlighting the double antibiotic paste, triple antibiotic paste and calcium hydroxide paste. Disinfection ability was evaluated against Enterococcus faecalis and multispecies biofilms by using the fluorescence technique and colony forming unit counting, for 7 to 21 days. Double antibiotic paste and triple antibiotic paste demonstrated excellent antibiofilm activity, unlike CH paste that showed limited disinfection, even when associated with different antimicrobial agents. Triple antibiotic paste was the most effective medication against biofilm.

Digital Microfluidics-Powered Real-Time Monitoring of Isothermal DNA Amplification of Cancer Biomarker.

We introduce a digital microfluidics (DMF) platform specifically designed to perform a loop-mediated isothermal amplification (LAMP) of DNA and applied it to a real-time amplification to monitor a cancer biomarker, c-Myc (associated to 40% of all human tumors), using fluorescence microscopy. We demonstrate the full manipulation of the sample and reagents on the DMF platform, resulting in the successful amplification of 90 pg of the target DNA (0.5 ng/µL) in less than one hour. Furthermore, we test the efficiency of an innovative mixing strategy in DMF by employing two mixing methodologies onto the DMF droplets-low frequency AC (alternating current) actuation as well as back-and-forth droplet motion-which allows for improved fluorescence readouts. Fluorophore bleaching effects are minimized through on-chip sample partitioning by DMF processes and sequential droplet irradiation. Finally, LAMP reactions require only 2 µL volume droplets, which represents a 10-fold volume reduction in comparison to benchtop LAMP.

Do alternative scaffolds used in regenerative endodontics promote better root development than that achieved with blood clots?

The aim of this integrative review was to identify whether alternative scaffolds used in regenerative endodontics contribute to better root development, in relation to the increase in root length and thickness of dentin walls, compared with blood clot (BC) scaffolds. The literature search was conducted in PubMed, SciELO and Lilacs databases, using descriptors related to the topic. After applying the eligibility criteria, 11 articles were selected and analyzed according to the proposed aim. Five clinical and six in vivo studies, conducted in animals, compared different types of alternative scaffolds with BCs, with emphasis on platelet-rich plasma (PRP) and platelet-rich fibrin (PRF). All scaffolds, alternative or BC, promoted an increase in root length and dentin wall thickness, with varying percentages of increase between studies. In general, there was a significant increase in root length and dentin thickness promoted by PRF and PRP scaffolds, compared with BC. It was concluded that the majority of the scaffolds tested contributed to the increase in root length and thickness of dentin walls, with emphasis on PRF and PRP.

The effects of thiamethoxam on coffee seedling morphophysiology and Neotropical leaf miner (Leucoptera coffeella) infestations.

BACKGROUND: Coffee (Coffea arabica L.) is one of the main commodities produced in Brazil. Insecticides like the (systemic) neonicotinoid thiamethoxam are widely used to suppress pest populations during coffee production, in particular the Neotropical leaf miner (Leucoptera coffeella Guérin-Mèneville & Perrottet, 1842) (Lepidoptera: Lyonetiidae). In addition to its efficacy against this pest species, thiamethoxam is also thought to be a bioactivator of plant metabolism, but has not yet been tested for such activity. Thus, the objectives of the present study were (1) to assess the concentration-response effects of thiamethoxam on the vegetative vigor of coffee seedlings (C. arabica 'Catuaí 144' cultivar) at different concentrations [2, 20, 40, 80 and 200 mg active ingredient (a.i.) kg-1 ] applied via soil drenching and (2) to evaluate if the plant response interferes with the effectiveness of thiamethoxam in controlling leaf miner populations. The morphophysiological traits of the coffee seedlings were evaluated 20, 40, 60 and 80 days after application, and leaf miner infestations were recorded starting 20 days after the insecticide application with the releasing of adults, and every 20 days afterwards. RESULTS: The results indicated that thiamethoxam has a deleterious effect on the morphophysiological traits of the plants compromising their development with increase in concentrations. However, leaf area exhibited a different pattern with a peak at 50 mg a.i. kg-1 consistent with thiamethoxam-induced hormesis (i.e. biphasic response with stimulatory effect at sublethal range of a toxic substance at the higher concentration). Nonetheless, such bioactivator effect did not affect thiamethoxan effectiveness against the leaf miner even at the lowest concentration tested. CONCLUSION: Thiamethoxan exhibited bioactivation effect on leaf at low concentration, but without compromising efficacy against leaf miner populations. Therefore, its proposed metabolism-boosting properties may encourage the unnecessary use of this insecticide, potentially leading to higher selection for insecticide resistance and an eventual decline in its effectiveness against the Neotropical leaf miner. © 2022 Society of Chemical Industry.

A novel antimicrobial-containing nanocellulose scaffold for regenerative endodontics.

OBJECTIVES: The aim of this study was to evaluate bacterial nanocellulose (BNC) membranes incorporated with antimicrobial agents regarding cytotoxicity in fibroblasts of the periodontal ligament (PDLF), antimicrobial activity, and inhibition of multispecies biofilm formation. MATERIALS AND METHODS: The tested BNC membranes were BNC + 1% clindamycin (BNC/CLI); BNC + 0.12% chlorhexidine (BNC/CHX); BNC + nitric oxide (BNC/NO); and conventional BNC (BNC; control). After PDLF culture, the BNC membranes were positioned in the wells and maintained for 24 hours. Cell viability was then evaluated using the MTS calorimetric test. Antimicrobial activity against Enterococcus faecalis, Actinomyces naeslundii, and Streptococcus sanguinis (S. sanguinis) was evaluated using the agar diffusion test. To assess the antibiofilm activity, BNC membranes were exposed for 24 hours to the mixed culture. After sonicating the BNC membranes to remove the remaining biofilm and plating the suspension on agar, the number of colony-forming units (CFU)/mL was determined. Data were analyzed by 1-way analysis of variance and the Tukey, Kruskal-Wallis, and Dunn tests (α = 5%). RESULTS: PDLF metabolic activity after contact with BNC/CHX, BNC/CLI, and BNC/NO was 35%, 61% and 97%, respectively, compared to BNC. BNC/NO showed biocompatibility similar to that of BNC (p = 0.78). BNC/CLI showed the largest inhibition halos, and was superior to the other BNC membranes against S. sanguinis (p < 0.05). The experimental BNC membranes inhibited biofilm formation, with about a 3-fold log CFU reduction compared to BNC (p < 0.05). CONCLUSIONS: BNC/NO showed excellent biocompatibility and inhibited multispecies biofilm formation, similarly to BNC/CLI and BNC/CHX.

Influence of Mineral Particle Films and Biomaterials on Guava Fruits and Implications for the Oviposition of Anastrepha obliqua (Macquart) (Diptera: Tephritidae).

Anastrepha obliqua (Macquart, 1835) is an important pest of tropical fruits, especially Anacardiaceae and Myrtaceae, in the Americas. The objective of this study was to evaluate the influence of mineral films and biomaterials on the coloring of guava fruits (Psidium guajava L.) and implications for the oviposition of A. obliqua. Before the bioassays, color, firmness characteristics, total soluble solids, pH, and titratable acidity were determined to characterize the maturation stage of the fruits. Pieces of guava fruit covered in aluminum foil were immersed in suspensions of mineral particles (Surround® WP kaolin; kaolins 605, 607, 608, and 611; and talc) and biomaterials (chitosan, cassava and potato starch, and guar gum) and distilled water (control). After drying, the fruits were exposed to two A. obliqua pairs for 48 h in choice and non-choice tests, and the numbers of eggs per fruit were counted. Mineral films (Surround® WP kaolin, and kaolins 605, 607, 608, and 611) and biomaterials (cassava and potato starch) interfered with the color of guava (luminosity, chroma, and hue angle), inhibiting the oviposition of A. obliqua. Talc, chitosan, and guar gum did not influence the oviposition of A. obliqua in guava.

Effects of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide on Adhesion of Posts in Teeth Obturated With Different Sealers.

The aim of this study was to evaluate the effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) on bond strength of fiberglass posts in root canals obturated with different endodontic sealers. Seventy-eight mandibular premolars were obturated with three sealers (n=26): Endofill (END), AH Plus (AHP), and Endosequence BC Sealer (EBS). After preparation of the post space, two subgroups were formed according to the cementation of the posts (n=13): with EDC (EDC), and without EDC (control - CON). The specimens were submitted to a pull-out test, failure mode classification, and root canal surface evaluation by scanning electron microscopy after post displacement. Regarding the bond strength, a significant difference between the EDC and CON subgroups occurred only in the END (p=0.001). No difference was detected among the CON subgroups (p=0.339). However, among the EDC subgroups, AHP presented significantly higher values (END versus AHP: p=0.001; AHP versus EBS: p=0.016). Upon classification of failure modes, score 1 (≥ 50% of cement) was the most commonly observed, except for the END + EDC. Remains of endodontic sealers and resin cements were found in the cervical third, but without statistical difference (p=0.269), while in the middle third, difference occurred (p=0.004). In conclusion, EDC decreases bond strength when associated with END sealer, without changing the failure mode between the resin cement and fiberglass post. The best performance was observed when EDC was combined with AHP sealer.

Forest Matrix Fosters High Similarity in Bee Composition Occurring on Isolated Outcrops Within Amazon Biome.

Most studies analyze fragmentation due to habitat loss caused by anthropogenic activities and few of them analyzed fragmentation on naturally fragmented areas. In the Eastern Amazon, it is possible to find areas naturally open and surrounded by pristine forest. Understanding how species respond to isolation in these areas is an important challenge for decision-making processes aiming conservation and restoration. Using standardized methods of bee collection (entomological nets, bait trap, pan trap, and nest trap), the objective of this study was to analyze the composition and diversity of bees occurring on six isolated outcrops located in two protected areas within Amazon biome. More specifically, we tested 1) if the dissimilarity in bee species composition is explained by the isolation of outcrops and 2) if bee richness, abundance, and Shannon diversity can be explained by the outcrop size. We found 118 species, with the Meliponini and Euglossini (Hymenoptera: Apidae) tribes representing the highest number of species. The similarity in species composition across all outcrops is high and is not explained by the isolation. In addition, the richness, abundance, and Shannon diversity are not explained by outcrop size. Forest does not seem to be a barrier to bee movement, and although most species probably nest in the forests, they use the highly diverse plants of the outcrops as a complementary food source.

Diazoxide Modulates Cardiac Hypertrophy by Targeting H2O2 Generation and Mitochondrial Superoxide Dismutase Activity.

BACKGROUND: Cardiac hypertrophy involves marked wall thickening or chamber enlargement. If sustained, this condition will lead to dysfunctional mitochondria and oxidative stress. Mitochondria have ATP-sensitive K+ channels (mitoKATP) in the inner membrane that modulate the redox status of the cell. OBJECTIVE: We investigated the in vivo effects of mitoKATP opening on oxidative stress in isoproterenol- induced cardiac hypertrophy. METHODS: Cardiac hypertrophy was induced in Swiss mice treated intraperitoneally with isoproterenol (ISO - 30 mg/kg/day) for 8 days. From day 4, diazoxide (DZX - 5 mg/kg/day) was used in order to open mitoKATP (a clinically relevant therapy scheme) and 5-hydroxydecanoate (5HD - 5 mg/kg/day) or glibenclamide (GLI - 3 mg/kg/day) were used as mitoKATP blockers. RESULTS: Isoproterenol-treated mice had elevated heart weight/tibia length ratios (HW/TL). Additionally, hypertrophic hearts had elevated levels of carbonylated proteins and Thiobarbituric Acid Reactive Substances (TBARS), markers of protein and lipid oxidation. In contrast, mitoKATP opening with DZX avoided ISO effects on gross hypertrophic markers (HW/TL), carbonylated proteins and TBARS, in a manner reversed by 5HD and GLI. Moreover, DZX improved mitochondrial superoxide dismutase activity. This effect was also blocked by 5HD and GLI. Additionally, ex vivo treatment of isoproterenol- induced hypertrophic cardiac tissue with DZX decreased H2O2 production in a manner sensitive to 5HD, indicating that this drug also acutely avoids oxidative stress. CONCLUSION: Our results suggest that diazoxide blocks oxidative stress and reverses cardiac hypertrophy. This pharmacological intervention could be a potential therapeutic strategy to prevent oxidative stress associated with cardiac hypertrophy.

Genotypes of Epstein-Barr virus (EBV1/EBV2) in individuals with infectious mononucleosis in the metropolitan area of Belém, Brazil, between 2005 and 2016.

Two types of Epstein Barr virus (EBV1/EBV2) have been shown to infect humans. Although their genomes are similar, the regions containing the EBNA genes differ. This study aimed to characterize the EBV genotypes of infectious mononucleosis (IM) cases in the metropolitan region of Belém, Brazil, from 2005 to 2016. A total of 8295 suspected cases with symptoms/signs of IM were investigated by infectious disease physicians at Evandro Chagas Institute, Health Care Service, from January 2005 to December 2016. Out of the total, 1645 (19.8%) samples had positive results for EBV by enzyme immunoassay and 251 (15.3%) were submitted to polymerase chain reaction (PCR) technique, using the EBNA3C region, in order to determine the type of EBV. Biochemical testing involving aspartate aminotransferase, alanine aminotransferase and gamma-glutamyl transferase were also performed. EBV type was identified by PCR in 30.3% (76/251) of individuals; of those, 71.1% (54/76) were classified as EBV1, 17.1% (13/76) as EBV2, and 11.8% (9/76) as EBV1 + EBV2. The main symptoms/signs observed with EBV1 infection were cervical lymphadenopathy (64.8%, 35/54), fever (63%, 34/54), headache (20.4%, 11/54), arthralgia (20.4%, 11/54), and exanthema (18.5%, 10/54). EBV2 infection was detected in all but two age groups, with an average age of 24 years. The most common signs/symptoms of EBV2 were fever (76.9%, 10/13), average duration of 18 days, and lymphadenopathy (69.2%, 9/13). In contrast, EBV1 + EBV2 coinfections were more frequent in those aged five years or less (20.0%, 2/10). The symptoms of EBV1 + EBV2 coinfection included fever (66.7%, 6/9), and cervical lymphadenopathy and headache (33.3%, 3/9) each. The mean values of hepatic enzymes according to type of EBV was significantly different (p < 0.05) in those EBV1 infected over 14 years of age. Thus, this pioneering study, using molecular methods, identified the EBV genotypes in 30.3% of the samples, with circulation of EBV1, EBV2, and EBV1 + EBV2 co-infection in cases of infectious mononucleosis in the northern region of Brazil.

Estratégias de ensino-aprendizagem de neuroanatomia: uma revisão integrativa da literatura / Strategies for teaching-learning neuroanatomy: an integrative literature review

Resumo Introdução: Uma significativa parcela dos estudantes de Medicina considera a neuroanatomia um conteúdo de difícil compreensão, muitas vezes desprovido de aplicações práticas devido à sua extensa e monótona apresentação. Além disso, ao longo das últimas décadas, houve uma redução no tempo dedicado à apresentação teórica da neuroanatomia. Corroborando tal afirmativa, durante a pandemia de Covid-19, observou-se um distanciamento crescente entre professores e alunos, o que, por sua vez, agravou ainda mais os desafios no ensino da disciplina. Objetivo: Este estudo possui como objetivo realizar uma revisão integrativa da literatura no intuito de explorar estratégias para aperfeiçoamento do ensino da neuroanatomia no curso superior de Medicina. Método: Para atingir esse objetivo, os subscritores efetivaram uma pesquisa integrativa de artigos publicados sobre estratégias de ensino-aprendizagem de neuroanatomia para estudantes de Medicina no período entre 1º de janeiro de 2000 e 26 de maio de 2023. Para obtenção de tais dados, os autores utilizaram três bases de dados - PubMed, SciELO e BVS -, empregando os seguintes descritores e o operador booleano "AND" em ambos os idiomas (português e inglês): "ensino", "aprendizagem", "neuroanatomia", "estudantes de medicina", "learning", "teaching", "neuroanatomy" e "medical students". Resultado: A revisão da literatura revelou uma crescente exploração de novas abordagens de ensino e aprendizado em neuroanatomia, destacando-se o uso de tecnologias como realidade virtual, cursos de neuroanatomia assistidos por computadores, modelos anatômicos de argila e a aplicação de estudos de casos clínicos. Conclusão: Nota-se nos últimos anos um notável surgimento de novas estratégias de ensino-aprendizagem no cenário acadêmico, que, por sua vez, visam aprimorar o conhecimento e a experiência dos alunos nos mais variados campos, inclusive na neuroanatomia.

Abstract Introduction: Most medical students consider neuroanatomy to be a challenging subject, often lacking practical applications due to its extensive and monotonous presentation. Furthermore, over the past few decades, there has been a reduction in the time allocated to the theoretical presentation of neuroanatomy. Recently, during the COVID-19 pandemic, there has been a growing disconnect between teachers and students, exacerbating the challenges in teaching this discipline. Objective: This study aimed to conduct an integrative literature review to explore strategies for enhancing the teaching of neuroanatomy in medical undergraduate programs. Method: To achieve this objective, we conducted an integrative search of articles published on teaching and learning strategies in neuroanatomy for medical students. We utilized three databases: PubMed, SciELO, and BVS, employing the following keywords and the boolean operator "AND" in both Portuguese and English: "ensino," "aprendizagem," "neuroanatomia," "estudantes de medicina," and "learning," "teaching," "neuroanatomy," and "medical students." Result: The literature review revealed a growing exploration of new approaches to teaching and learning in neuroanatomy, with a focus on the utilization of technologies such as virtual reality, computer-assisted neuroanatomy courses, anatomical clay models, and the application of clinical case studies. Conclusion: In recent years, there has been a noticeable emergence of new teaching and learning strategies in the academic environment, aimed at enhancing students' knowledge and experience, particularly in the field of neuroanatomy.

A new group of species within the bee genus Ruizantheda, with a revised key to the males of the genus (Hymenoptera: Halictidae: Caenohalictini).

Males of the neotropical bee genus Ruizantheda Moure sensu lato (Halictinae: Caenohalictini) differ from those of other caenohalictine genera in having the outer gonostylar plate with a large membranous region that extends to the ventral region, and the ventral gonostylar lobe retrorse. These features permit the placement of six additional species described here, four of which are new, in the genus in this broader sense. The males of these six species share the following characteristics: profemur swollen; mesofemur exceedingly swollen; mesotibia slightly swollen with flat, minutely ridged ventral area and small apical tooth; S4 shortened medially, commonly largely hidden under S3, with transverse median depression and apical margin emarginate; apicolateral lobes of S4 with tuft of branched setae and stout, simple, recurved setae on margin; S5 with U-shaped gradulus and setal patch, sometimes inconspicuous; outer lateral expansion of penis valve bilobed, and median posterior margin of volsella strongly angulate. Together, these species constitute a new group within Ruizantheda and share with the previously known Ruizantheda inca Coelho, Felizardo, Engel, R. aerugineus Coelho, Felizardo, Engel, and R. kallos Coelho, Felizardo, Engel, a short outer gonostylar plate, terminating before the apex of the main gonostylar lobe as well as the presence of long setae on its dorsal surface. In other species of Ruizantheda the outer gonostylar plate extends beyond the apex of the main gonostylar lobe and lacks setae. The species comprising this distinctive subgroup of Ruizantheda, and treated herein, are: R. nigra n. sp., R. colombiana n. sp., R. venezuelana n. sp., R. baeri (Vachal) n. comb., R. pilosa n. sp., and R. gaullei (Vachal) n. comb. Two of the new species expand the distribution of the genus northward into Colombia and Venezuela. In addition to the description and illustration of the species, an updated key to the species of Ruizantheda s. l. is provided.

Effect of different bleaching protocols on whitening efficiency and enamel superficial microhardness.

BACKGROUND: Tooth bleaching is a popular aesthetic treatment to modify the color of teeth. Despite the extensive literature concerning the subject, there is still no consensus regarding the application mode of the different bleaching agents and their effect on enamel. Therefore, this study evaluated the influence of different bleaching protocols on whitening efficiency and enamel superficial hardness. MATERIAL AND METHODS: Bovine enamel fragments were embedded in acrylic resin and wet-sanded to obtain a flat buccal surface. The specimens were then randomly divided into 6 groups (n=10), based on the bleaching material [HP Maxx 35% (35% hydrogen peroxide), HP Blue 35% (35% hydrogen peroxide + Ca) and Whiteness Perfect 10% (10% carbamide peroxide)] and application mode (3 applications of 15 min, 1 application of 45 min, 1 application of 1h30 or 1 application of 3h30). The color and superficial hardness were assessed before and after bleaching. The color was assessed by means of a digital spectrophotometer, using CIELab parameters. Vickers hardness was determined using a load of 200g for 10s. Data were statistically analyzed by one-way ANOVA with repeated measures and Tukey's test (α = 0.05). RESULTS: Concerning the color alteration, the groups were similar to each other, except for at-home bleaching protocols, which were statistically different from each other. Similarly, there was a reduction in hardness values comparing the initial and final periods, with lowest final hardness for the at-home bleaching protocol group applied for 3h30. CONCLUSIONS: It can be concluded that the bleaching protocols influenced the final color and enamel surface hardness, evidencing that lower gel concentrations applied for longer periods promoted greater variation in color and lower final hardness. Key words:Tooth bleaching, roughness, microhardness, in-office, at-home bleaching.