RESUMO
A 3-amino-functionalized phosphabenzene (phosphinine) has been synthesized and structurally characterized. The pyramidalized nitrogen atom of the dimethylamino substituent indicates only a weak interaction between the lone pair of the nitrogen atom and the aromatic phosphorus heterocycle, resulting in somewhat basic character. It turned out that the amino group can indeed be protonated by HCl. In contrast to pyridines, however, the phosphabenzene-ammonium salt undergoes a selective ring contraction to form a hydroxylphospholene oxide in the presence of additional water. Based on deuterium labeling experiments and quantum chemical calculations, a rational mechanism for this hitherto unknown conversion is proposed.
RESUMO
A diglyme solution of Na[cyclo-P5 ] (1) reacts with alkynes and isolobal nitriles and phosphaalkynes to afford the otherwise elusive (aza)phospholide anions 2 a-c, 4 a,b, and 6. The reaction of Na[cyclo-P5 ] with alkynes and nitriles was studied by means of DFT methods, which suggested a concerted mechanism for the formation of 2 a and 4 b. The anions 2 a-c, 4 a,b, and 6 coordinate in an η5 -fashion towards FeII to give the sandwich (aza)phosphametallocenes 3 a-c, 5 a,b and 7 in moderate to good yields. The new compounds were characterized by means of multinuclear NMR spectroscopy, single-crystal X-ray diffraction and cyclic voltammetry.
RESUMO
A phosphinine-borane adduct of a Me3 Si-functionalized phosphinine and the Lewis acid B(C6 F5 )3 has been synthesized and characterized crystallographically for the first time. The reaction strongly depends on the nature of the substituents in the α-position of the phosphorus heterocycle. In contrast, the reaction of B2 H6 with various substituted phosphinines leads to an equilibrium between the starting materials and the phosphinine-borane adducts that is determined by the Lewis basicity of the phosphinine. The novel phosphinine borane adduct (6-B(C6 F5 )3 ) shows rapid and facile insertion and [4+2] cycloaddition reactivity towards phenylacetylene. A hitherto unknown dihydro-1-phosphabarrelene is formed with styrene. The reaction with an ester provides a new, facile and selective route to 1-R-phosphininium salts. These salts then undergo a [4+2] cycloaddition in the presence of Me3 Si-C≡CH and styrene to cleanly form unprecedented derivatives of 1-R-phosphabarrelenium salts.
RESUMO
The photochemical activation of the C(sp)-C(sp2) bond in Pt(0)-η2-aryl-phosphaalkyne complexes leads selectively to coordination compounds of the type LnPt(aryl)(C≡P). The oxidative addition reaction is a novel, clean, and atom-economic route for the synthesis of reactive terminal Pt(II)-cyaphido complexes, which can undergo [3 + 2] cycloaddition reactions with organic azides, yielding the corresponding Pt(II)-triazaphospholato complexes. The C-C bond cleavage reaction is thermodynamically uphill. Upon heating, the reverse and quantitative reductive elimination toward the Pt(0)-phosphaalkyne-π-complex is observed.
RESUMO
The synthesis and isolation of a phosphinine selenide was achieved for the first time by reacting red selenium with 2,6-bis(trimethylsilyl)phosphinine. The rather large coupling constant of 1 JP,Se =883â Hz is in line with a P-Se bond of high s-character. The σ-electron donating Me3 Si-substituents significantly increase the energy of the phosphorus lone pair and hence its basicity, making the heterocycle considerably more basic and nucleophilic than the unsubstituted phosphinine C5 H5 P, as confirmed by the calculated gas phase basicities. NBO calculations further reveal that the lone pairs of the selenium atom are stabilized through donor-acceptor interactions with antibonding orbitals of the aromatic ring. The novel phosphinine selenide shows a distinct reactivity towards hexafluoro-2-butyne, Au(I)Cl as well as i PrOH. Our results pave the way for new perspectives in the chemistry of phosphorus in low coordination.
RESUMO
An iron catalyst has been developed for the transfer hydrogenation of carbon-carbon multiple bonds. Using a well-defined ß-diketiminate iron(II) precatalyst, a sacrificial amine and a borane, even simple, unactivated alkenes such as 1-hexene undergo hydrogenation within 1 h at room temperature. Tuning the reagent stoichiometry allows for semi- and complete hydrogenation of terminal alkynes. It is also possible to hydrogenate aminoalkenes and aminoalkynes without poisoning the catalyst through competitive amine ligation. Furthermore, by exploiting the separate protic and hydridic nature of the reagents, it is possible to regioselectively prepare monoisotopically labeled products. DFT calculations define a mechanism for the transfer hydrogenation of propene with nBuNH2 and HBpin that involves the initial formation of an iron(II)-hydride active species, 1,2-insertion of propene, and rate-limiting protonolysis of the resultant alkyl by the amine N-H bond. This mechanism is fully consistent with the selective deuteration studies, although the calculations also highlight alkene hydroboration and amine-borane dehydrocoupling as competitive processes. This was resolved by reassessing the nature of the active transfer hydrogenation agent: experimentally, a gel is observed in catalysis, and calculations suggest this can be formulated as an oligomeric species comprising H-bonded amine-borane adducts. Gel formation serves to reduce the effective concentrations of free HBpin and nBuNH2 and so disfavors both hydroboration and dehydrocoupling while allowing alkene migratory insertion (and hence transfer hydrogenation) to dominate.
RESUMO
Catalytic dehydrocoupling methodologies, whereby dihydrogen is released from a substrate (or intermolecularly from two substrates) is a mild and efficient method to construct main group element-main group element bonds, the products of which can be used in advanced materials, and also for the development of hydrogen storage materials. With growing interest in the potential of compounds such as ammonia-borane to act as hydrogen storage materials which contain a high weight% of H2, along with the current heightened interest in base metal catalyzed processes, this review covers recent developments in amine and phosphine dehydrocoupling catalyzed by iron complexes. The complexes employed, products formed and mechanistic proposals will be discussed.
RESUMO
The scission and homologation of CO is a fundamental process in the Fischer-Tropsch reaction. However, given the heterogeneous nature of the catalyst and forcing reaction conditions, it is difficult to determine the intermediates of this reaction. Here we report detailed mechanistic insight into the scission/homologation of CO by two-coordinate iron terphenyl complexes. Mechanistic investigations, conducted using in situ monitoring and reaction sampling techniques (IR, NMR, EPR and Mössbauer spectroscopy) and structural characterisation of isolable species, identify a number of proposed intermediates. Crystallographic and IR spectroscopic data reveal a series of migratory insertion reactions from 1Mes to 4Mes. Further studies past the formation of 4Mes suggest that ketene complexes are formed en route to squaraine 2Mes and iron carboxylate 3Mes, with a number of ketene containing structures being isolated, in addition to the formation of unbound, protonated ketene (8). The synthetic and mechanistic studies are supported by DFT calculations.
RESUMO
Tetrapyridyl-functionalized phosphinines were prepared and structurally characterized. The donor-functionalized aromatic phosphorus heterocycles react highly selectively and even reversibly with water. Calculations reveal P,N-cooperativity for this process, with the flanking pyridyl groups serving to kinetically enhance the formal oxidative addition process of H2O to the low-coordinate phosphorus atom via H-bonding. Subsequent tautomerization forms 1,2-dihydrophosphinine derivatives, which can be quantitatively converted back to the phosphinine by applying vacuum, even at room temperature. This process can be repeated numerous times, without any sign of decomposition of the phosphinine. In the presence of CuI·SMe2, dimeric species of the type ([Cu2I2(phosphinine)]2) are formed, in which each phosphorus atom shows the less common µ2-bridging 2e--lone-pair-donation to two Cu(i)-centres. Our results demonstrate that fully unsaturated phosphorus heterocycles, containing reactive P[double bond, length as m-dash]C double bonds, are interesting candidates for the activation of E-H bonds, while the aromaticity of such compounds plays an appreciable role in the reversibility of the reaction, supported by NICS calculations.
RESUMO
Invited for this month's cover is the group of Prof. Dr. Christian Müller from Freie Universität Berlin, Germany. The cover picture shows a phosphinine selenide that interacts with organoiodines and halogens to form co-crystalline and charge-transfer adducts. More information can be found in the Research Article by Christian Müller and co-workers.
RESUMO
A co-crystalline adduct consisting of a phosphinine selenide and an organohalide was obtained by slow evaporation of the solvent from a mixture of 2,6-bis(trimethylsilyl)phosphinine selenide and 1,4-diiodotetrafluorobenzene (1,4-TFDIB). The crystallographic characterization of the product shows π-π stacking, Fâ â â H hydrogen bonding between 1,4-TFDIB and the phosphinine selenide, as well as Fâ â â F interactions between 1,4-TFDIB molecules. Moreover, the phosphorus heterocycle could be crystallized with diiodine to form a 1 : 1 adduct. The d(I-I) distance in this compound is 2.8475(3)â Å, which is shorter than the corresponding one in triphenylphosphine selenide diiodide, reflecting the weaker net-donor power of the phosphinine selenide towards diiodine. The phosphinine selenide could also be used as a selenium transfer reagent to generate KSeCN from KCN.
RESUMO
Enhancing catalytic activity through synergic effects is a current challenge in homogeneous catalysis. In addition to the well-established metal-metal and metal-ligand cooperation, we showcase here an example of self-activation by the substrate in controlling the catalytic activity of the two-coordinate iron complex [Fe(2,6-Xyl2C6H3)2] (1, Xyl = 2,6-Me2C6H3). This behavior was observed for aryl acetylenes in their regioselective cyclotrimerization to 1,2,4-(aryl)-benzenes. Two kinetically distinct regimes are observed dependent upon the substrate-to-catalyst ratio ([RC≡CH]0/[1]0), referred to as the low ([RC≡CH]0/[1]0 < 40) and high ([RC≡CH]0/[1]0 > 40) regimes. Both showed sigmoidal kinetic response, with positive Hill indices of 1.85 and 3.62, respectively, and nonlinear Lineweaver-Burk replots with an upward curvature, which supports positive substrate cooperativity. Moreover, two alkyne molecules participate in the low regime, whereas up to four are involved in the high regime. The second-order rate dependence on 1 indicates that binuclear complexes are the catalytically competent species in both regimes, with that in the high one being 6 times faster than that involved in the low one. Moreover, Eyring plot analyses revealed two different catalytic cycles, with a rate-determining step more endergonic in the low regime than in the high one, but with a more ordered transition state in the high regime than in the low one.
RESUMO
Trimethylsilyl-substituted triazaphospholes were synthesized by a [3+2] cycloaddition reaction between organic azides and (CH3)3Si-CîP. In an attempt to isolate their N-alkylated products, the formation of BF3 adducts of unprecedented triazaphosphol-5-ylidenes was found. The nature of the carboncarbene-boron bond was investigated within the DFT framework, revealing a strong donation of electrons from the carbene carbon atom to the boron atom combined with weak back-bonding.
RESUMO
The reaction of 2,4,6-triaryl-λ3-phosphinine-Cr(CO)3-π-complexes with [Rh(COD)2]BF4 leads to unusual diamagnetic Rh0-dimers, which contain two phosphinine-π-complexes acting as a bridging 2e--ligand towards the Rh2(CO)2 core. These compounds represent a missing coordination mode for the aromatic 6-membered phosphorus heterocycle.
Assuntos
Derivados de Benzeno , Compostos Organofosforados , Cristalografia por Raios X , Estrutura MolecularRESUMO
An unexpected route to hitherto unknown amidine-functionalized phosphinines has been developed that is rapid and simple. Starting from primary amines and CF3-substituted λ3,σ2-phosphinines, a cascade of dehydrofluorination reactions leads selectively to ortho-amidinephosphinines. DFT calculations reveal that this unusual transformation can take place via a series of nucleophilic attacks at the electrophilic, low-coordinate phosphorus atom.
Assuntos
Fósforo , Teoria da Densidade FuncionalRESUMO
For the first time, the direct synthesis of 1-methyl-phosphininium salts has been achieved by reacting aromatic λ3,σ2-phosphinines with the readily available dimethyl chloronium salt [(CH3)2Cl]+[Al(OTeF5)4]-. The remarkably high electrophilicity of the alkylation reagent in combination with the weakly coordinating pentafluoro-orthotelluratoaluminate anion offers excellent conditions for this one-step approach. Our simple and quantitative access to 1-methyl-phosphininium salts will pave the way to explore the chemistry of such reactive species in more detail.