RESUMO
Here we investigate the relationship between thermomechanical properties and chemical structure of well-characterized lignin-based epoxy resins. For this purpose, technical lignins from eucalyptus and spruce, obtained from the Kraft process, were used. The choice of lignins was based on the expected differences in molecular structure. The lignins were then refined by solvent fractionation, and three fractions with comparable molecular weights were selected to reduce effects of molar mass on the properties of the final thermoset resins. Consequently, any differences in thermomechanical properties are expected to correlate with molecular structure differences between the lignins. Oxirane moieties were selectively introduced to the refined fractions, and the resulting lignin epoxides were subsequently cross-linked with two commercially available polyether diamines (Mn = 2000 and 400) to obtain lignin-based epoxy resins. Molecular-scale characterization of the refined lignins and their derivatives were performed by 31P NMR, 2D-NMR, and DSC methods to obtain the detailed chemical structure of original and derivatized lignins. The thermosets were studied by DSC, DMA, and tensile tests and demonstrated diverse thermomechanical properties attributed to structural components in lignin and selected amine cross-linker. An epoxy resin with a lignin content of 66% showed a Tg of 79 °C from DMA, Young's modulus of 1.7 GPa, tensile strength of 66 MPa, and strain to failure of 8%. The effect of molecular lignin structure on thermomechanical properties was analyzed, finding significant differences between the rigid guaiacyl units in spruce lignin compared with sinapyl units in eucalyptus lignin. The methodology points toward rational design of molecularly tailored lignin-based thermosets.
Assuntos
Eucalyptus , Lignina , Fracionamento Químico , Resinas Epóxi , Peso MolecularRESUMO
A novel potassium oxalate-based hydrogel is proposed for treating dentin hypersensitivity and this study evaluates its in vitro performance as a remineralizing, desensitizing agent. Etched disks of human dentin were treated for 10 or 20 min using the test hydrogel, to mimic a professional application with dental mouth guards. Dentin disks were evaluated in terms of permeability indexes in a fluid-filled system, the surface morphology was assessed by scanning electron microscopy, and the structural properties were studied using X-ray diffraction analysis. The potassium oxalate hydrogel significantly reduced dentin permeability, in a time-dependent manner, and occluded most of the patent dentinal tubules via crystal precipitation, forming a remineralized layer. After hydrogel treatments, an acid solution (pH 4.2) was applied to the disks for 30 s, or 1, 2, or 5 min, in order to reproduce a plaque-like oral acidity, and further analysis showed a good resistance of the remineralized layer to the acid challenge. The potassium oxalate-based hydrogel showed a better performance over commercially available products and artificial saliva, appearing a promising candidate for the treatment of dentin hypersensitivity.
Assuntos
Dessensibilizantes Dentinários/farmacologia , Sensibilidade da Dentina/tratamento farmacológico , Hidrogel de Polietilenoglicol-Dimetacrilato/farmacologia , Ácido Oxálico/farmacologia , Dessensibilizantes Dentinários/síntese química , Permeabilidade da Dentina/efeitos dos fármacos , Humanos , Hidrogel de Polietilenoglicol-Dimetacrilato/síntese química , Técnicas In Vitro , Microscopia Eletrônica de Varredura , Saliva Artificial/farmacologia , Difração de Raios XRESUMO
2,5-Furandicarboxylic acid (FDCA) is currently considered one of the most relevant bio-sourced building blocks, representing a fully sustainable competitor for terephthalic acid as well as the main component in green polymers such as poly(ethylene 2,5-furandicarboxylate) (PEF). The oxidation of biobased 5-hydroxymethylfurfural (HMF) represents the most straightforward approach to obtain FDCA, thus attracting the attention of both academia and industries, as testified by Avantium with the creation of a new plant expected to produce 5000 tons per year. Several approaches allow the oxidation of HMF to FDCA. Metal-mediated homogeneous and heterogeneous catalysis, metal-free catalysis, electrochemical approaches, light-mediated procedures, as well as biocatalytic processes share the target to achieve FDCA in high yield and mild conditions. This Review aims to give an up-to-date overview of the current developments in the main synthetic pathways to obtain FDCA from HMF, with a specific focus on process sustainability.
Assuntos
Ácidos Dicarboxílicos , Furaldeído , Furaldeído/análogos & derivados , Furaldeído/metabolismo , Furanos/metabolismoRESUMO
The present work investigated the possibility to use wet blue (WB) leather wastes as natural reinforcing fibers within different polymer matrices. After their preparation and characterization, WB fibers were melt-mixed at 10 wt.% with poly(lactic acid) (PLA), polyamide 12 (PA12), thermoplastic elastomer (TPE), and thermoplastic polyurethane (TPU), and the obtained samples were subjected to rheological, thermal, thermo-mechanical, and viscoelastic analyses. In parallel, morphological properties such as fiber distribution and dispersion, fiber-matrix adhesion, and fiber exfoliation phenomena were analyzed through a scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS) to evaluate the relationship between the compounding process, mechanical responses, and morphological parameters. The PLA-based composite exhibited the best results since the Young modulus (+18%), tensile strength (+1.5%), impact (+10%), and creep (+5%) resistance were simultaneously enhanced by the addition of WB fibers, which were well dispersed and distributed in and significantly branched and interlocked with the polymer matrix. PA12- and TPU-based formulations showed a positive behavior (around +47% of the Young modulus and +40% of creep resistance) even if the not-optimal fiber-matrix adhesion and/or the poor de-fibration of WB slightly lowered the tensile strength and elongation at break. Finally, the TPE-based sample exhibited the worst performance because of the poor affinity between hydrophilic WB fibers and the hydrophobic polymer matrix.
RESUMO
Tanneries generate large amounts of solid and liquid wastes, which contain harmful chemical compounds in the environment, such as chromium, that is used in the tanning process. Until now, they have been almost completely dumped in landfills. Thus, finding eco-sustainable and innovative alternatives for the management and disposal of these wastes is becoming a huge challenge for tanneries and researchers around the world. In particular, the scientific and industrial communities have started using wastes to produce new materials exploiting the characteristics of leather, which are strongly connected with the macromolecular structure of its main component, collagen. None of the reviews on leather waste management actually present in the scientific literature report in detail the use of leather to make composite materials and the mechanical properties of the materials obtained, which are of fundamental importance for an effective industrial exploitation of leather scraps. This comprehensive review reports for the first time the state of the art of the strategies related to the recovery and valorization of both hydrolyzed collagen and leather waste for the realization of composite materials, reporting in detail the properties and the industrial applications of the materials obtained. In the conclusion section, the authors provide practical implications for industry in relation to sustainability and identify research gaps that can guide future authors and industries in their work.
RESUMO
The plastic industry is today facing a green revolution; however, biopolymers, produced in low amounts, expensive, and food competitive do not represent an efficient solution. The use of wine waste as second-generation feedstock for the synthesis of polymer building blocks or as reinforcing fillers could represent a solution to reduce biopolymer costs and to boost the biopolymer presence in the market. The present critical review reports the state of the art of the scientific studies concerning the use of wine by-products as substrate for the synthesis of polymer building blocks and as reinforcing fillers for polymers. The review has been mainly focused on the most used bio-based and biodegradable polymers present in the market (i.e., poly(lactic acid), poly(butylene succinate), and poly(hydroxyalkanoates)). The results present in the literature have been reviewed and elaborated in order to suggest new possibilities of development based on the chemical and physical characteristics of wine by-products.
RESUMO
Nowadays the issues related to the end of life of traditional plastics are very urgent due to the important pollution problems that plastics have caused. Biodegradable plastics can help to try to mitigate these problems, but even bioplastics need much attention to carefully evaluate the different options for plastic waste disposal. In this Minireview, three different end-of-life scenarios (composting, recycling, and upcycling) were evaluated in terms of literature review. As a result, the ability of bioplastics to be biodegraded by composting has been related to physical variables and materials characteristics. Hence, it is possible to deduce that the process is mature enough to be a good way to minimize bioplastic waste and valorize it for the production of a fertilizer. Recycling and upcycling options, which could open up many interesting new scenarios for the production of high-value materials, are less studied. Research in this area can be strongly encouraged.
RESUMO
OBJECTIVES: Winter sports are high-energy outdoor activities involving high velocities and acrobatic maneuvers, thus raising safety concerns. Specific studies on the impact mechanics of back protectors are very limited. In this study analytical and numerical models are developed to rationalize results of impact experiments and propose new design procedures for this kind of equipment. DESIGN: Different soft-shell solutions currently available on the market are compared. In particular, the role of dynamic material constitutive properties and of environmental temperature (which affects mainly material stiffness) on energy absorption capability are evaluated. METHODS: Starting from dynamic mechanical-thermal characterization of the closed-cell polymeric foams constituting the protectors, we exploited analytical modeling and Finite Element Method simulations to interpret experimental data from drop weight impact test and to characterize protectors at different temperatures and after multiple impacts. RESULTS: The temperature and frequency dependent properties of these materials characterize their impact behavior. Modeling results are in good agreement with impact tests. Results demonstrate how ergonomic soft-shell solution provides an advantage with respect to traditional hard-shell in terms of impact protection. Moreover, it can maintain nearly unaltered its protective properties after multiple impacts on the same point. CONCLUSIONS: The coupled analytical-simulation approach here presented could be extensively used to predict the impact behavior of such equipment, starting from material characterization, allowing to save costs and time for physical prototyping and tests for design and optimization.
Assuntos
Desenho de Equipamento , Teste de Materiais , Equipamentos de Proteção , Esportes na Neve , Equipamentos Esportivos , Dorso , Análise de Elementos Finitos , Dureza , Modelos Teóricos , TemperaturaRESUMO
The aim of the study was to investigate thermo-physiological comfort of three back protectors identifying design features affecting heat loss and moisture management. Five volunteers tested the back protectors in a climatic chamber during an intermittent physical activity. Heart rate, average skin temperature, sweat production, microclimate temperature and humidity have been monitored during the test. The sources of heat losses have been identified using infrared thermography and the participants answered a questionnaire to express their subjective sensations associated with their thermo-physiological condition. The results have shown that locally torso skin temperature and microclimate depended on the type of back protector, whose design allowed different extent of perspiration and thermal insulation. Coupling physiological measurements with the questionnaire, it was found that overall comfort was dependent more on skin wetness than skin temperature: the participants preferred the back protector with the highest level of ventilation through the shell and the lowest level of microclimate humidity.
Assuntos
Lesões nas Costas/prevenção & controle , Equipamentos de Proteção , Esqui/lesões , Equipamentos Esportivos , Tronco/fisiologia , Adulto , Desenho de Equipamento , Feminino , Frequência Cardíaca , Humanos , Umidade , Masculino , Temperatura Cutânea , Inquéritos e Questionários , Sudorese , Sensação TérmicaRESUMO
A new synthetic pathway for the production of p-toluic acid has been developed starting from reagents derived from renewable resources. A Diels-Alder reaction between sorbic and acrylic acids is followed by a combined dehydrogenation/ decarboxylation process, providing p-toluic acid in high yields. This route permits to use milder conditions compared to other Diels-Alder approaches reported in the literature, and therefore can contribute to a more sustainable terephthalic acid production.
Assuntos
Benzoatos/síntese química , Ácidos Ftálicos/síntese química , Acrilatos/química , Descarboxilação , Hidrogênio/química , Ácido Sórbico/químicaRESUMO
The action of FeCl(3) on 3-(alkylsulfanyl)thiophenes (3-(alkylthio)thiophenes) leads to the one-step formation of regioregular alpha-conjugated oligothiophenes, from trimer to octamer, depending on the solvent used and on the length of the alkyl chain. The regiochemistry of these oligomers is characterized by one inner head-to-head linkage between adjacent rings and by a variable number of lateral head-to-tail junctions. The reaction of ferric chloride with the head-to-head and head-to-tail bis(methylsulfanyl)-2,2'-bithiophenes gives the corresponding tetramers, while the reaction with the tail-to-tail counterpart affords a high molecular weight insoluble material. With the aid of theoretical calculations, these results are interpreted on the basis of the joint effects of the orienting power of the substituents and of the stability of the radical cations formed during the oxidative process.
RESUMO
The photocatalytic effect of TiO2 has great potential for the disinfection of surfaces. Most studies reported in the literature use UV activation of TiO2, while visible light has been used only in a few applications. In these studies, high concentrations of TiO2, which can compromise surface properties, have been used. In this work, we have developed an acrylic-water paint dispersion containing low TiO2 content (2 vol %) for the inactivation of microorganisms involved in hospital-acquired infections. The nanoparticles and the coating have been characterized using spectroscopic techniques and transmission electron microscopy, showing their homogenous dispersion in the acrylic urethane coating. A common fluorescent light source was used to activate the photocatalytic activity of TiO2. The paint dispersion showed antimicrobial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. The coating containing the TiO2 nanoparticles maintained good UV stability, strong adhesion to the substrate and high hardness. Therefore, the approach used is feasible for paint formulation aimed at disinfection of healthcare surfaces.
RESUMO
OBJECTIVES: The application of an electric field has been shown to positively influence the impregnation of the resin monomers currently used in dentin bonding systems during hybrid layer formation. This study presents an experimental characterization of the electrical properties of these monomers with the aim of both correlating them to their chemical structures and seeking an insight into the mechanisms of the monomer migration under an applied electric field. METHODS: Some common monomers examined were TEGDMA (triethyleneglycoldimethacrylate), HEMA (2-hydroxyethyl methacrylate), UDMA (urethane dimethacrylate), 2-MP (bis[2-(methacryloyloxy)ethyl] phosphate, TCDM di(hydroxyethyl methacrylate) ester of 5-(2,5-dioxotetrahydrofurfuryl)-3-methyl-3-cyclohexenyl-1,2-dicarboxylic anhydride) and Bis-GMA [2,2-bis(4-2-hydroxy-3-methacryloyloxypropoxyphenyl)propane]. A customized cell produced for the measurement of the electrical properties of monomers was manufactured and electrical conductivity and permittivity of resin monomers were measured. RESULTS: The permittivity of the tested monomers is largely affected by electrical frequency. The large values of permittivity and dielectric losses observed as frequency decreased, indicate a dominant effect of ionic polarization, particularly evident in materials showing the highest conductivity. Permittivity and conductivity of the tested monomers showed a similar behavior, i.e. materials with the lowest permittivity also show small values of conductivity and vice versa. SIGNIFICANCE: The results of the present study revealed a good correlation between electrical properties and Hoy solubility parameters and, in particular, the higher the polar contribution (polar forces plus hydrogen bonding) the higher the permittivity and conductivity. The most relevant outcome of this study is that the electrophoretic mechanism prevails on the electroendoosmotic effect in determining the monomer migration under the application of electric fields.
Assuntos
Resinas Compostas/química , Colagem Dentária/métodos , Condutividade Elétrica , Teste de Materiais/métodos , Teste de Materiais/instrumentação , SolubilidadeRESUMO
OBJECTIVES: The application of an electric field has been shown to positively influence the bonding of dentin bonding systems (DBS) by improving adhesive impregnation into dentin. However, the mechanism responsible for this phenomenon has not been completely elucidated. The aim of this study was to clarify the effects of pH, matrix ionic strength, and applied voltage on the migration of commonly used DBS monomers in a model matrix (agarose gel). METHODS: Some common monomers examined were bis-GMA (2,2-bis[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane); HEMA (2-hydroxyethyl methacrylate); 2-MP (bis[2-(methacryloyloxy) ethyl] phosphate); TCDM [di(hydroxyethyl methacrylate) ester of 5-(2,5,-dioxo tetrahydrofurfuryl)-3-methyl-3-cyclohexenyl-1,2-dicarboxylic acid]; and TEGDMA (triethylene glycol dimethacrylate). Agarose gels poured into a horizontal 10-well electrophoretic cell were used to mimic the collagen fibrils of the dentin organic matrix. The role of pH, matrix ionic strength, and voltage on monomer migration was assayed by modifying the experimental conditions. RESULTS: Results of experiments performed at pH 3.1, 6.3, 8.5, and 12.3; at low, medium, and high ionic strength; and at 50 and 100 V clearly showed that DBA monomer migration toward both the anode and the cathode can be affected by each of these parameters. SIGNIFICANCE: Migration of acrylic monomers toward the anode or cathode can be achieved as desired by selective choice of pH, ionic strength, and applied voltage. Additional studies are needed to evaluate the synergistic effects of DBS monomer blends on migration in an electric field.