Calcium and phosphorus concentrations in native and decellularized semilunar valve tissues.

BACKGROUND AND AIM OF THE STUDY: Native, allograft, xenograft and bioprosthetic semilunar valves are all susceptible to calcific degeneration. However, intrinsic differences in baseline calcium and phosphorus tissue concentrations within mammalian normal valve structural components (e.g., cusps, sinus, vessel wall) additionally subdivided by tripartite regions (e.g., right-, left- and non-coronary leaflets) have never been systematically measured and reported. It was originally hypothesized that variations in normative tissue concentrations of calcium and phosphorus may correspond to subsequent clinical patterns of acquired dystrophic calcification; decellularization was also expected to reduce the tissue concentrations of these elements. METHODS: Native semilunar valves were freshly harvested from 12 juvenile sheep. Half of the valves were decellularized (six aortic and six pulmonary), while the other valves were flash-frozen at -80 degrees C within minutes of euthanasia as native valves. Elemental calcium and phosphorus concentrations were measured in the great vessels, sinus walls and cusps using inductively coupled plasma optical emission spectrometry (ICP-OES), and analyzed with non-parametric statistical tests. RESULTS: Calcium concentrations (microg/mg tissue; median (range) were similar in aortic native cusps (0.37 (0.21)), sinus walls (0.37 (0.09)) and aorta (0.37 (0.08)) (p = 0.8298). Pulmonary calcium concentrations were similar in cusps, but 10-25% higher in the native sinus (p = 0.0018) and pulmonary artery (p < 0.0001) compared to analogous aortic structures. All cusps had higher phosphorus concentrations than their respective conduit tissues. No tripartite regional variations were observed. Decellularization did not reduce the calcium content of cusps, but removed 50-55% of vessel and sinus wall calcium. However, up to 85% of phosphorus was removed from all valve tissues (p < 0.001). CONCLUSION: There were no significant differences in normal tissue concentrations of calcium between aortic valve functional structures, and no semilunar tripartite regional differences in either semilunar valve complex. Thus, the distribution of baseline tissue calcium content of healthy young valves is not inherently predictive of selective or asymmetric anatomical patterns of valve degenerative calcification. Native semilunar cusps contain the highest phosphorus concentrations. Decellularization reduces all elemental concentrations except for cuspal calcium.

Non-physiologic Bioreactor Processing Conditions for Heart Valve Tissue Engineering.

PURPOSE: Conventional methods of seeding decellularized heart valves for heart valve tissue engineering have led to inconsistent results in interstitial cellular repopulation, particularly of the distal valve leaflet, and notably distinct from documented re-endothelialization. The use of bioreactor conditioning mimicking physiologic parameters has been well explored but cellular infiltration remains challenging. Non-characteristic, non-physiologic conditioning parameters within a bioreactor, such as hypoxia and cyclic chamber pressure, may be used to increase the cellular infiltration leading to increased recellularization. METHODS: To investigate the effects of novel and perhaps non-intuitive bioreactor conditioning parameters, ovine aortic heart valves were seeded with mesenchymal stem cells and cultured in one of four environments: hypoxia and high cyclic pressures (120 mmHg), normoxia and high cyclic pressures, hypoxia and negative cyclic pressures (- 20 mmHg), and normoxia and negative cyclic pressures. Analysis included measurements of cellular density, cell phenotype, and biochemical concentrations. RESULTS: The results revealed that the bioreactor conditioning parameters influenced the degree of recellularization. Groups that implemented hypoxic conditioning exhibited increased cellular infiltration into the valve leaflet tissue compared to normoxic conditioning, while pressure conditioning did not have a significant effect of recellularization. Protein expression across all groups was similar, exhibiting a stem cell and valve interstitial cell phenotype. Biochemical analysis of the extracellular matrix was similar between all groups. CONCLUSION: These results suggest the use of non-physiologic bioreactor conditioning parameters can increase in vitro recellularization of tissue engineered heart valve leaflets. Particularly, hypoxic culture was found to increase the cellular infiltration. Therefore, bioreactor conditioning of tissue engineered constructs need not always mimic physiologic conditions, and it is worth investigating novel or uncharacteristic culture conditions as they may benefit aspects of tissue culture.

Wharton's Jelly Matrix Decellularization for Tissue Engineering Applications.

Scaffolds, both natural and synthetic, used in tissue engineering provide mechanical support to cells. Tissue decellularization has been used to provide natural extracellular matrix scaffolds for tissue engineering purposes. In this chapter we focus on describing the methodology used to decellularize Wharton's jelly matrix, the mucous connective tissue that surrounds umbilical cord vessels, to obtain decellularized Wharton's jelly matrix (DWJM); an extracellular matrix that can be used for tissue engineering purposes. We also, briefly, describe our experience with processing DWJM for cell seeding and recellularization.

Processing and tensile properties of hydroxyapatite-whisker-reinforced polyetheretherketone.

Polyetheretherketone (PEEK) was reinforced with 0-50 vol% hydroxyapatite (HA) whiskers using a novel powder processing and compression molding technique which enabled uniform mixing at high whisker content. Texture analysis showed that viscous flow during compression molding produced a preferred orientation of whiskers along the specimen tensile axis. Consequently, the elastic modulus or ultimate tensile strength of HA-whisker-reinforced PEEK was able to be tailored to mimic human cortical bone. PEEK reinforced with 40 and 50 vol% HA whiskers exhibited elastic moduli of 17 and 23 GPa, respectively. Elastic constants were measured using ultrasonic wave propagation and revealed an orthotropic anisotropy also similar to that measured in human cortical bone. PEEK reinforced with 10 and 20 vol% HA whiskers exhibited an ultimate tensile strength of 90 and 75 MPa, respectively. Tensile specimen fracture surfaces showed evidence of brittle failure in both reinforced and un-reinforced PEEK. Whisker pullout was observed with PEEK adhered to HA whiskers, suggesting a relatively strong interface between the PEEK matrix and HA whisker reinforcements.

Recellularization of decellularized heart valves: Progress toward the tissue-engineered heart valve.

The tissue-engineered heart valve portends a new era in the field of valve replacement. Decellularized heart valves are of great interest as a scaffold for the tissue-engineered heart valve due to their naturally bioactive composition, clinical relevance as a stand-alone implant, and partial recellularization in vivo. However, a significant challenge remains in realizing the tissue-engineered heart valve: assuring consistent recellularization of the entire valve leaflets by phenotypically appropriate cells. Many creative strategies have pursued complete biological valve recellularization; however, identifying the optimal recellularization method, including in situ or in vitro recellularization and chemical and/or mechanical conditioning, has proven difficult. Furthermore, while many studies have focused on individual parameters for increasing valve interstitial recellularization, a general understanding of the interacting dynamics is likely necessary to achieve success. Therefore, the purpose of this review is to explore and compare the various processing strategies used for the decellularization and subsequent recellularization of tissue-engineered heart valves.

Species-specific effects of aortic valve decellularization.

Decellularized heart valves have great potential as a stand-alone valve replacement or as a scaffold for tissue engineering heart valves. Before decellularized valves can be widely used clinically, regulatory standards require pre-clinical testing in an animal model, often sheep. Numerous decellularization protocols have been applied to both human and ovine valves; however, the ways in which a specific process may affect valves of these species differently have not been reported. In the current study, the comparative effects of decellularization were evaluated for human and ovine aortic valves by measuring mechanical and biochemical properties. Cell removal was equally effective for both species. The initial cell density of the ovine valve leaflets (2036±673cells/mm2) was almost triple the cell density of human leaflets (760±386cells/mm2; p<0.001). Interestingly, post-decellularization ovine leaflets exhibited significant increases in biaxial areal strain (p<0.001) and circumferential peak stretch (p<0.001); however, this effect was not observed in the human counterparts (p>0.10). This species-dependent difference in the effect of decellularization was likely due to the higher initial cellularity in ovine valves, as well as a significant decrease in collagen crosslinking following the decellularization of ovine leaflets that was not observed in the human leaflet. Decellularization also caused a significant decrease in the circumferential relaxation of ovine leaflets (p<0.05), but not human leaflets (p>0.30), which was credited to a greater reduction of glycosaminoglycans in the ovine tissue post-decellularization. These results indicate that an identical decellularization process can have differing species-specific effects on heart valves. STATEMENT OF SIGNIFICANCE: The decellularized heart valve offers potential as an improved heart valve substitute and as a scaffold for the tissue engineered heart valve; however, the consequences of processing must be fully characterized. To date, the effects of decellularization on donor valves from different species have not been evaluated in such a way that permits direct comparison between species. In this manuscript, we report species-dependent variation in the biochemical and biomechanical properties of human and ovine aortic heart valve leaflets following decellularization. This is of clinical significance, as current regulatory guidelines required pre-clinical use of the ovine model to evaluate candidate heart valve substitutes.

Design and efficacy of a single-use bioreactor for heart valve tissue engineering.

Heart valve tissue engineering offers the promise of improved treatments for congenital heart disorders; however, widespread clinical availability of a tissue engineered heart valve (TEHV) has been hindered by scientific and regulatory concerns, including the lack of a disposable, bioreactor system for nondestructive valve seeding and mechanical conditioning. Here we report the design for manufacture and the production of full scale, functional prototypes of such a system. To evaluate the efficacy of this bioreactor as a tool for seeding, ovine aortic valves were decellularized and subjected to seeding with human mesenchymal stem cells (hMSC). The effects of pulsatile conditioning using cyclic waveforms tuned to various negative and positive chamber pressures were evaluated, with respect to the seeding of cells on the decellularized leaflet and the infiltration of seeded cells into the interstitium of the leaflet. Infiltration of hMSCs into the aortic valve leaflet was observed following 72 h of conditioning under negative chamber pressure. Additional conditioning under positive pressure improved cellular infiltration, while retaining gene expression within the MSC-valve interstitial cell phenotype lineage. This protocol resulted in a subsurface pilot population of cells, not full tissue recellularization. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 249-259, 2017.

Pulse Duplicator Hydrodynamic Testing of Bioengineered Biological Heart Valves.

There are many heart valve replacements currently available on the market; however, these devices are not ideal for pediatric patients with congenital heart valve defects. Decellularized valve substitutes offer potential for improved clinical outcomes and require pre-clinical testing guidelines and testing systems suitable for non-crosslinked, biological heart valves. The objective of this study was to assess the hydrodynamic performance of intact, bioengineered pulmonary valves using a custom pulse duplicator capable of testing intact biological valved conduits. The mechanical behavior of valve associated sinus and arterial tissue was also evaluated under biaxial loading. Cryopreserved, decellularized, extracellular matrix (ECM) conditioned and glutaraldehyde fixed valves showed reduced pressure gradients and increased effective orifice area for decellularized and ECM conditioned valves. ECM conditioning resulted in increased elastic modulus but decreased stretch in circumferential and longitudinal directions under biaxial loading. Overall, decellularization and ECM conditioning did not compromise the scaffolds, which exhibited satisfactory bench top performance.

Performance of allogeneic bioengineered replacement pulmonary valves in rapidly growing young lambs.

BACKGROUND: Cardiac allometric organ growth after pediatric valve replacement can lead to patient-prosthesis size mismatch and valve re-replacement, which could be mitigated with allogeneic decellularized pulmonary valves treated with collagen conditioning solutions to enhance biological and mechanical performance, termed "bioengineered valves." In this study, we evaluated functional, dimensional, and biological responses of these bioengineered valves compared with traditional cryopreserved valves implanted in lambs during rapid somatic growth. METHODS: From a consanguineous flock of 13 lambs, the pulmonary valves of 10 lambs (mean weight, 19.6 ± 1.4 kg) were replaced with 7 bioengineered valves or 3 classically cryopreserved valves. After 6 months, the 10 lambs with implanted valves and 3 untreated flock mates were compared by echocardiography, cardiac catheterization, and explant pathology. RESULTS: Increases in body mass, valve geometric dimensions, and effective orifice areas were similar in the 2 groups of lambs. The bioengineered valves had higher median cusp-to-cusp coaptation areas (34.6%; interquartile range, 21.00%-35.13%) and were more similar to native valves (43.4%; interquartile range, 42.59%-44.01%) compared with cryopreserved valves (13.2%; interquartile range, 7.07%-13.91%) (P = .043). Cryopreserved valves cusps, but not bioengineered valve cusps, were thicker than native valve cusps (P = .01). Histologically, cryopreserved valves demonstrated less than native cellularity, whereas bioengineered valves that were acellular at the time of surgery gained surface endothelium and subsurface myofibroblast interstitial cells in pulmonary artery, sinus wall, and cusp base regions. CONCLUSIONS: Biological valve conduits can enlarge via passive dilatation without matrix synthesis, but this would result in decreased cusp coaptational areas. Bioengineered valves demonstrated similar annulus enlargement as cryopreserved valves but usually retained larger areas of cuspal coaptation. Heat-shock protein 47-positive (collagen-synthesizing) cells were present in previously acellular bioengineered sinus walls and cusp bases, but rarely in more distal cusp matrices.

Chondroinduction from Naturally Derived Cartilage Matrix: A Comparison Between Devitalized and Decellularized Cartilage Encapsulated in Hydrogel Pastes.

Hydrogel precursors are liquid solutions that are prone to leaking after surgical placement. This problem was overcome by incorporating either decellularized cartilage (DCC) or devitalized cartilage (DVC) microparticles into traditional photocrosslinkable hydrogel precursors in an effort to achieve a paste-like hydrogel precursor. DCC and DVC were selected specifically for their potential to induce chondrogenesis of stem cells, given that materials that are chondroinductive on their own without growth factors are a revolutionary goal in orthopedic medicine. We hypothesized that DVC, lacking the additional chemical processing steps in DCC to remove cell content, would lead to a more chondroinductive hydrogel with rat bone marrow-derived mesenchymal stem cells. Hydrogels composed of methacrylated hyaluronic acid (MeHA) and either DCC or DVC microparticles were tested with and without exposure to transforming growth factor (TGF)-ß3 over a 6 week culture period, where swelling, mechanical analysis, and gene expression were observed. For collagen II, Sox-9, and aggrecan expression, MeHA precursors containing DVC consistently outperformed the DCC-containing groups, even when the DCC groups were exposed to TGF-ß3. DVC consistently outperformed all TGF-ß3-exposed groups in aggrecan and collagen II gene expression as well. In addition, when the same concentrations of MeHA with DCC or DVC microparticles were evaluated for yield stress, the yield stress with the DVC microparticles was 2.7 times greater. Furthermore, the only MeHA-containing group that exhibited shape retention was the group containing DVC microparticles. DVC appeared to be superior to DCC in both chondroinductivity and rheological performance of hydrogel precursors, and therefore DVC microparticles may hold translational potential for cartilage regeneration.

The bioactivity of cartilage extracellular matrix in articular cartilage regeneration.

Cartilage matrix is a promising material for cartilage regeneration given the evidence supporting its chondroinductive character. The "raw materials" of cartilage matrix can serve as building blocks and signals for tissue regeneration. These matrices can be created by chemical or physical processing: physical methods disrupt cellular membranes and nuclei but may not fully remove all cell components and DNA, whereas chemical methods combined with physical methods are effective in fully decellularizing such materials. It is important to delineate between the sources of the cartilage matrix, that is, derived from matrix in vitro or from native tissue, and then to further characterize the cartilage matrix based on the processing method, decellularization or devitalization. With these distinctions, four types of cartilage matrices exist: decellularized native cartilage (DCC), devitalized native cartilage (DVC), decellularized cell-derived matrix (DCCM), and devitalized cell-derived matrix (DVCM). One currently marketed cartilage matrix device is decellularized, although trends in patents suggest additional decellularized products may be available in the future. To identify the most relevant source and processing for cartilage matrix, testing needs to include targeting the desired application, optimizing delivery of the material, identify relevant FDA regulations, assess availability of materials, and immunogenic properties of the product.

Decellularized cartilage may be a chondroinductive material for osteochondral tissue engineering.

Extracellular matrix (ECM)-based materials are attractive for regenerative medicine in their ability to potentially aid in stem cell recruitment, infiltration, and differentiation without added biological factors. In musculoskeletal tissue engineering, demineralized bone matrix is widely used, but recently cartilage matrix has been attracting attention as a potentially chondroinductive material. The aim of this study was thus to establish a chemical decellularization method for use with articular cartilage to quantify removal of cells and analyze the cartilage biochemical content at various stages during the decellularization process, which included a physically devitalization step. To study the cellular response to the cartilage matrix, rat bone marrow-derived mesenchymal stem cells (rBMSCs) were cultured in cell pellets containing cells only (control), chondrogenic differentiation medium (TGF-ß), chemically decellularized cartilage particles (DCC), or physically devitalized cartilage particles (DVC). The chemical decellularization process removed the vast majority of DNA and about half of the glycosaminoglycans (GAG) within the matrix, but had no significant effect on the amount of hydroxyproline. Most notably, the DCC group significantly outperformed TGF-ß in chondroinduction of rBMSCs, with collagen II gene expression an order of magnitude or more higher. While DVC did not exhibit a chondrogenic response to the extent that DCC did, DVC had a greater down regulation of collagen I, collagen X and Runx2. A new protocol has been introduced for cartilage devitalization and decellularization in the current study, with evidence of chondroinductivity. Such bioactivity along with providing the 'raw material' building blocks of regenerating cartilage may suggest a promising role for DCC in biomaterials that rely on recruiting endogenous cell recruitment and differentiation for cartilage regeneration.

Measurements of the effects of decellularization on viscoelastic properties of tissues in ovine, baboon, and human heart valves.

In the development of tissue-engineered heart valves based on allograft decellularized extracellular matrix scaffolds, the material properties of the implant should be ideally comparable to the native semilunar valves. This investigation of the viscoelastic properties of the three functional aortic/pulmonary valve tissues (leaflets, sinus wall, and great vessel wall) was undertaken to establish normative values for fresh samples of human valves and to compare these properties after various steps in creating scaffolds for subsequent bioreactor-based seeding protocols. Torsional wave methods were used to measure the viscoelastic properties. Since preclinical surgical implant validation studies require relevant animal models, the tests reported here also include results for three pairs of both ovine and baboon aortic and pulmonary valves. For human aortic valves, four cryopreserved valves were compared with four decellularized scaffolds. Because of organ and heart valve transplant scarcity for pulmonary valves, only three cryopreserved and two decellularized pulmonary valves were tested. Leaflets are relatively soft. Loss angles are similar for all tissue samples. Regardless of species, the decellularization process used in this study has little effect on viscoelastic properties.

Effects of cryopreservation, decellularization and novel extracellular matrix conditioning on the quasi-static and time-dependent properties of the pulmonary valve leaflet.

Decellularized allografts offer potential as heart valve substitutes and scaffolds for cell seeding. The effects of decellularization on the quasi-static and time-dependent mechanical behavior of the pulmonary valve leaflet under biaxial loading conditions have not previously been reported in the literature. In the current study, the stress-strain, relaxation and creep behaviors of the ovine pulmonary valve leaflet were investigated under planar-biaxial loading conditions to determine the effects of decellularization and a novel post-decellularization extracellular matrix (ECM) conditioning process. As expected, decellularization resulted in increased stretch along the loading axes. A reduction in relaxation was observed following decellularization. This was accompanied by a reduction in glycosaminoglycan (GAG) content. Based on previous implant studies, these changes may be of little functional consequence in the short term; however, the long term effects of decreased relaxation and GAG content remain unknown. Some restoration of relaxation was observed following ECM conditioning, especially in the circumferential specimen direction, which may help mitigate any detrimental effects due to decellularization. Regardless of processing, creep under biaxial loading was negligible.

Hydroxyapatite whisker-reinforced polyetherketoneketone bone ingrowth scaffolds.

Hydroxyapatite (HA) whisker-reinforced polyetherketoneketone (PEKK) bone ingrowth scaffolds were prepared and characterized. High levels of porosity (75-90%) and HA whisker reinforcement (0-40 vol.%) were attained using a powder processing approach to mix the HA whiskers, PEKK powder and a NaCl porogen, followed by compression molding at 350-375 degrees Celsius and particle leaching to remove the porogen. The scaffold architecture and microstructure exhibited characteristics known to be favorable for osteointegration. Scaffold porosity was interconnected with a mean pore size in the range 200-300 microm as measured by micro-computed tomography. HA whiskers were embedded within and exposed on the surface of scaffold struts, producing a microscale surface topography, shown by von Kossa staining and scanning electron microscopy. Therefore, HA whisker-reinforced PEKK bone ingrowth scaffolds may be advantageous for orthopedic implant fixation, including interbody spinal fusion.

Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds.

The apparent mechanical properties of hydroxyapatite (HA) whisker reinforced polyetherketoneketone (PEKK) scaffolds were evaluated in unconfined, uniaxial compression to investigate the effects of the porosity (75%, 82.5% and 90%), HA content (0, 20 and 40 vol%) and mold temperature (350, 365 and 375 ( composite function)C). Increased porosity resulted in a non-linear decrease in the elastic modulus and yield strength for both reinforced and unreinforced PEKK scaffolds, as expected. The increase in elastic modulus and yield strength with increased relative density followed a power-law, similar to trabecular bone and other open-cell foams. HA whisker reinforcement generally resulted in an increased elastic modulus from 0 to 20 vol% HA and a subsequent decrease from 20 to 40 vol% HA, while the yield strength and strain were decreased in scaffolds with 40 vol% HA compared to those with 0 or 20 vol% HA. Increased mold temperature resulted in an increased elastic modulus, yield strength and yield strain. These effects enabled the mechanical properties to be tailored to mimic human trabecular bone. The elastic modulus was greater than 50 MPa, and the yield strength was greater than 0.5 MPa, for scaffolds with 75% porosity at all combinations of reinforcement level and mold temperature. Scaffolds with 75% porosity and 20 vol% HA molded at 375 ( composite function)C exhibited a mean elastic modulus and yield strength of 149 MPa and 2.2 MPa, respectively, which was the highest of the conditions investigated in this study and similar to human vertebral trabecular bone. Therefore, HA whisker reinforced PEKK scaffolds may be advantageous for permanent implant fixation, including interbody spinal fusion.

Effects of the reinforcement morphology on the fatigue properties of hydroxyapatite reinforced polymers.

The objective of this study was to examine the effects of the hydroxyapatite (HA) reinforcement morphology and content on the fatigue behavior of HA reinforced high density polyethylene (HDPE). To this end, HDPE was reinforced with 20 and 40 vol% of either HA whiskers or an equiaxed HA powder, and tested in four-point bending fatigue under simulated physiological conditions. The fatigue life, mechanical property degradation and failure surfaces were compared between experimental groups. HDPE reinforced with HA whiskers exhibited a four- to five-fold increase (p < 0.001, T-test) in fatigue life compared to an equiaxed powder for either the 20 and 40 vol% reinforcement level. Composites containing 40 vol% HA exhibited decreased fatigue life compared to those with 20 vol% HA for either reinforcement morphology (p < 0.0001, ANOVA). HA whisker reinforced HDPE exhibited less stiffness loss, permanent deformation (creep) and energy dissipation at a given number of cycles compared to HA powder. Thus, HA whisker reinforced HDPE was more tolerant of fatigue damage due to either microcracking or polymer plasticity. Scanning electron microscopy of failure surfaces and surface microcracks showed evidence of toughening by uncracked ligaments, crack tip plasticity, polymer fibril bridging and HA whisker pullout. The results of this study suggest that the use of HA whiskers, in place of HA powder, is a straightforward means to improve the fatigue life and damage tolerance of HA reinforced polymers for synthetic bone substitutes.