Flexible and fast estimation method of far-field patterns for digital-coding metasurfaces.

We propose a flexible and fast estimation method to calculate the far-field patterns of digital-coding metasurfaces (DCMs) by performing chirp Z-transform (CZT), called the DCM-CZT method. Because of the expression form of convolution, CZT can be accelerated by fast Fourier transform. Compared with the traditional discrete Fourier transform (DFT) method, the DCM-CZT method can accurately estimate the far-field patterns with arbitrary element periods. More importantly, the DCM-CZT method can calculate partial far-field patterns for some specific orientations, instead of the global far-field patterns like DFT does. We show that the DCM-CZT method can efficiently improve the partial space-resolution to avoid the calculation error caused by the fence effect under acceptable computing time. We present six representative examples to demonstrate the capabilities of the proposed method. Results show that the far-field patterns calculated by the DCM-CZT method have good agreements with full-wave simulations and experimental measurements. However, the results of main-lobes calculated by the DFT method have obvious deviations when the element period is about 0.2 wavelengths. We believe that the DCM-CZT method has potential applications in wireless communications and radar detections.

Bendable transmission line and amplifier of spoof surface plasmon polaritons at microwave frequencies.

A bendable transmission line (TL) of spoof surface plasmon polaritons (SSPPs) is presented, which can maintain good transmission performance despite of the deformation caused by bending. Such a TL consists of flexible dielectric substrate and ultrathin metallic strip with zigzag decorations that are designed to support the propagation of SSPPs with strong field confinement and low radiation loss. Furthermore, the proposed SSPP TL is used to excite an amplifier chip efficiently, reaching high and stable gains with nearly no degradation of amplification in the bending states. Numerical and experimental results are demonstrated to verify the bendable merits of both passive TL and active amplifier from 12 GHz to 18 GHz. The flexible and stable characteristics of this design may find utility in novel applications like wearable electronics and conformal plasmonic circuits in the microwave frequencies.

Ka-band beam-scanning leaky-wave antenna fed by reconfigurable spoof surface plasmon polaritons.

A leaky-wave antenna (LWA) based on reconfigurable spoof surface plasmon polaritons (SSPP) is proposed for beam scanning in the Ka band, which consists of a reconfigurable SSPP waveguide and a periodic array of metal rectangular split rings. Both numerical simulations and experimental measurements show that the reconfigurable SSPP-fed LWA has good performance in the frequency range from 25 to 30 GHz. Specifically, as the bias voltage changes from 0 to 15 V, we can achieve the maximum sweep range of 24° at a single frequency and 59° at multiple frequency points, respectively. Owing to the wide-angle beam-steering feature, as well as the field confinement and wavelength compression properties derived from the SSPP architecture, the proposed SSPP-fed LWA possesses great potential applications in the compact and miniaturized devices and systems of the Ka band.

Touch-Programmable Metasurface for Various Electromagnetic Manipulations and Encryptions.

Previous programmable metasurfaces integrated with diodes or varactors require external instructions for field programmable gate arrays (FPGAs), which usually rely on computer-inputs or pre-loaded algorithms. But the complicated external devices make the coding regulation process of the programmable metasurfaces cumbersome and difficult to use. To simplify the process and provide a new interaction manner, a touch-programmable metasurface (TPM) based on touch sensing modules is proposed to realize various electromagnetic (EM) manipulations and encryptions. By simply touching the meta-units of the TPM, the state of the diodes can be changed. Through the touch controls, the TPM can achieve independent and direct manipulations of meta-units and efficient inputs of coding patterns without using a FPGA or other control modules. Various coding patterns are demonstrated to achieve diverse scattering-field control and flexible near-field EM information encryptions, which verifies the feasibility of the TPM design. The presented TPM will have wide application prospects in imaging displays, wireless communications, and EM information encryptions.

Dual-band chiral metasurface for independent controls of spin-selective reflections.

The development of chiral metasurfaces with spin-selective reflection or transmission provides a new way to control the circularly polarized (CP) waves. However, it is still a great challenge to independently manipulate the polarization, frequency, and phase of the spin-selective reflected waves in different operating bands, which may have potential applications in improving the data capacity of microwave and optical communication systems. Here, a dual-band chiral metasurface is proposed to generate gigantic intrinsic chirality with strong circular dichroism (CD) in two different frequency bands by piecing two typical mono-chiral units together. The polarization, frequency and phase of the spin-selective reflected waves can also be independently designed in the two operating bands by adjusting the configuration of the chiral unit structures. Based on the proposed chiral structures, a dual-band chiral metasurface with spin-selective anomalous reflections is designed and demonstrated by both simulations and experiments. The results show that the polarization of spin-selective reflected waves can be customized by selecting appreciate chiral structures, while the wavefront of the spin-selective reflected waves can be further controlled by designing their arrangement.

Topological Flat Bands in Self-Complementary Plasmonic Metasurfaces.

Photonics can be confined in real space with dispersion vanishing in the momentum space due to destructive interference. In this Letter, we report the experimental realization of flat bands with nontrivial topology in a self-complementary plasmonic metasurface. The band diagram and compact localized states are measured. In these nontrivial band gaps, we observe the topological edge states by near-field measurements. Furthermore, we propose a digitalized metasurface by loading controllable diodes with C_{3} symmetry in every unit cell. By pumping a digital signal into the metasurface, we investigate the interaction between incident waves and the dynamic metasurface. Experimental results indicate that compact localized states in the nontrivial flat band could enhance the wave-matter interactions to convert more incident waves to time-modulated harmonic photonics. Although our experiments are conducted in the microwave regime, extending the related concepts into the optical plasmonic systems is feasible. Our findings pave an avenue toward planar integrated photonic devices with nontrivial flat bands and exotic transmission phenomena.

Wavelength-dependent holographic impedance metasurfaces.

Impedance metasurface can establish a link between an electromagnetic surface wave and spatial wave and hence has attracted much attention of researchers in recent years. The holographic method, which is well known in the optical area, has also the great ability to shape the radiated beams in the microwave band by introducing the concept of surface impedance. Here, we propose a method to shape the radiated beams at two different wavelengths using single-layer multiplexing holographic impedance metasurface with in-plane feeding. For one wavelength, the generated broadside beam in the far field has the left-hand circular polarization, while the broadside beam in the other wavelength has the right-hand circular polarization. The radiation performance under different wavelengths are controlled independently due to the novel design of two eigen-modes in the impedance unit cell, in which the ratio of the two wavelengths can be large enough. To verify the proposed design experimentally, we fabricate a metasurface sample, and good agreement is observed between the simulation and measurement results.

Real-Time Detection of Concealed Threats with Passive Millimeter Wave and Visible Images via Deep Neural Networks.

Passive millimeter wave has been employed in security inspection owing to a good penetrability to clothing and harmlessness. However, the passive millimeter wave images (PMMWIs) suffer from low resolution and inherent noise. The published methods have rarely improved the quality of images for PMMWI and performed the detection only based on PMMWI with bounding box, which cause a high rate of false alarm. Moreover, it is difficult to identify the low-reflective non-metallic threats by the differences in grayscale. In this paper, a method of detecting concealed threats in human body is proposed. We introduce the GAN architecture to reconstruct high-quality images from multi-source PMMWIs. Meanwhile, we develop a novel detection pipeline involving semantic segmentation, image registration, and comprehensive analyzer. The segmentation network exploits multi-scale features to merge local and global information together in both PMMWIs and visible images to obtain precise shape and location information in the images, and the registration network is proposed for privacy concerns and the elimination of false alarms. With the grayscale and contour features, the detection for metallic and non-metallic threats can be conducted, respectively. After that, a synthetic strategy is applied to integrate the detection results of each single frame. In the numerical experiments, we evaluate the effectiveness of each module and the performance of the proposed method. Experimental results demonstrate that the proposed method outperforms the existing methods with 92.35% precision and 90.3% recall in our dataset, and also has a fast detection rate.

Near-infrared absorption-induced switching effect via guided mode resonances in a graphene-based metamaterial.

Optical switches based on dielectric nanostructures are highly desired at present. To enhance the wavelength-selective light absorption, and achieve an absorption-induced switching effect, here we propose a graphene-based metamaterial absorber that consists of a dielectric grating, a graphene monolayer, and a photonic crystal. Numerical results reveal that the dual-band absorption with an ultranarrow spectrum of the system is enhanced greatly due to the critical coupling, which is enabled by the combined effects of guided mode resonances and photonic band gap. The quality factor of the absorber can achieve a high value (>500), which is basically consistent with the coupled mode theory. Slow light emerges within the absorption window. In addition, electrostatic gating of graphene in the proposed structure provides dynamic control of the absorption due to the change of the chemical potential of the graphene, resulting in an optional multichannel switching effect. Unlike other one-dimensional devices, these effects can be applied to another polarization without changing the structure parameters, and the quality factor is significantly enhanced (>1000). The tunable light absorption offered by the simple structure with an all-dielectric configuration will provide potential applications for graphene-based optoelectronic devices in the near-infrared range, such as narrowband selective filters, detectors, optical switches, modulators, slow optical devices, etc.

Flexible control of light trapping and localization in a hybrid Tamm plasmonic system.

A hybrid Tamm plasmonic system is proposed to investigate light manipulation at near-infrared frequency. The numerical results reveal that two remarkable absorption peaks are generated due to the different types of resonant modes excited in the structure, which can be well explained theoretically by guided-mode resonance (GMR) and Tamm plasmon polaritons. It is found that the electromagnetic energy can be easily trapped in different parts of the structure. More importantly, strong interaction between the two modes can be achieved by adjusting the structure period or incident angle, resulting in obvious mode hybridization and exhibiting unique energy-transfer characteristics. In addition, the active modulation of GMR-based absorption can be controlled in a continuous type by tuning the polarization angle or in a jump type by adjusting the chemical potential of graphene. This work should be useful for developing many high-performance optoelectronic devices, including sensors, modulators, detectors, etc.

Angle-insensitive dual-functional resonators combining cavity mode resonance and magnetic resonance.

An angle-insensitive dual-functional resonator composed of a compound metallic grating is proposed and characterized numerically. The resonator exhibits different response characteristics for TE and TM polarization, thus enabling two functions, corresponding to a high-sensitivity sensor and a low Q-factor absorber. For TE polarization, the Q-factor, refractive index sensitivity, and figure of merit of the resonator can reach 283.4, 2577.6 nm/RIU, and 181.5 RIU-1, respectively, due to the excitation of cavity mode resonance. For TM polarization, the resonator can be regarded as an absorber with high absorptivity (>97%) based on magnetic resonance. Accordingly, these two mechanisms can be explained well by the waveguide theory and inductor-capacitor circuit model. The electromagnetic fields in the system can be selectively concentrated in the cavity or slit by simply adjusting the polarization angle, exhibiting unique energy localization characteristics. The resonator can also exhibit polarization-sensitive behavior due to the different bandwidths for the same wavelength. This simple structure provides a good paradigm for designing high-performance multi-functional devices.

Splitting spoof surface plasmon polaritons to different directions with high efficiency in ultra-wideband frequencies.

An efficient method to split spoof surface plasmon polaritons (SSPPs) to different directions is proposed by designing a low-loss SSPP waveguide in an ultrawide frequency band. For this purpose, a coplanar-waveguide-based SSPP structure with double-row hole arrays etched on its middle line is first studied, which can be easily used to split the SSPP waves. Based on this method, a Y-shaped -3 dB SSPP power divider and its application on a Mach-Zehnder interferometer are presented. The experiment demonstrates that the proposed method splits the SSPP waves to different directions effectively in ultrawide frequencies (2.5-39.7 GHz) with good isolations, indicating that the proposed SSPP power divider can have good application on a Mach-Zehnder interferometer and plasmonic integrated circuits.

Tailoring anisotropic perfect absorption in monolayer black phosphorus by critical coupling at terahertz frequencies.

A metamaterial perfect absorber composed of a black phosphorus (BP) monolayer, a photonic crystal, and a metallic mirror is designed and investigated to enhance light absorption at terahertz frequencies. Numerical results reveal that the absorption is enhanced greatly with narrow spectra due to critical coupling, which is enabled by guided resonances. Intriguingly, the structure manifests the unusual polarization-dependent feature attributable to the anisotropy of black phosphorus. The quality factor of the absorber can be as high as 95.1 for one polarization while 63.5 for another polarization, which is consistent with the coupled wave theory. The absorption is tunable by varying key parameters, such as period, radius, slab thickness, incident angle, and polarization angle. Furthermore, the state of the system (i.e., critical coupling, over coupling, and under coupling) can be tuned by changing the electron doping of BP, thus achieving various applications. This work offers a paradigm to enhance the light-matter interaction in monolayer BP without plasmonic response, and this easy-to-fabricate structure will provide potential applications in BP-based devices.

Strong coupling between magnetic plasmons and surface plasmons in a black phosphorus-spacer-metallic grating hybrid system.

We propose a black phosphorus-spacer-metallic grating hybrid system to investigate the strong coupling between black phosphorus surface plasmons (BPSP) and magnetic plasmons (MP) at far-infrared frequencies. We theoretically and numerically illustrate interactions between the BPSP mode and MP mode in the coupling regime, which leads to a prominent Rabi splitting and the formation of multiple hybrid modes. Since the mechanisms of the two resonance modes are completely different, the fields in the system can be selectively localized in the spacer layer or metallic slits by regulating the coupling between such modes. Due to the strong anisotropic in-plane properties of black phosphorus (BP), the coupling between BPSP and MP modes in both armchair and zigzag directions is quite different. This work offers a new paradigm to enhance the light-matter interaction through the coupling of multiple resonance modes, and the proposed device will provide potential applications in constructing easy-to-fabricate BP-based plasmonic devices.

Fast design of broadband terahertz diffusion metasurfaces.

A method for fast design of broadband terahertz diffusion metasurface is presented. The proposed metasurface is composed by three kinds of simply patterned elements with different resonant properties. To obtain the best broadband performance with the lowest backward reflections, a genetic algorithm is developed to manipulate the resonances for the fast determination of element geometries. An inverse discrete Fourier transform method is used to predict the scattering pattern of the metasurface with high accuracy and low time consumption, significantly enhancing the efficiency of the array-pattern design. The proposed fast design flow will benefit a broad range of terahertz applications, such as biological detection and imaging.

Experimental demonstration of compact spoof localized surface plasmons.

In recent years, the study of generating and detecting localized surface plasmons (LSPs) has been expanded from the optical regime to microwave regime. In this Letter, the compact spoof LSPs are introduced through both numerical simulations and near-field measurements. It is observed that the compact LSP structure could effectively reduce the resonant frequency with a stronger resonance strength (GdBsm) and a higher Q-factor. Both electric near-field and surface-current distributions are monitored to examine the resonance processes of the LSP particle.

Conformal surface plasmons propagating on ultrathin and flexible films.

Surface plasmon polaritons (SPPs) are localized surface electromagnetic waves that propagate along the interface between a metal and a dielectric. Owing to their inherent subwavelength confinement, SPPs have a strong potential to become building blocks of a type of photonic circuitry built up on 2D metal surfaces; however, SPPs are difficult to control on curved surfaces conformably and flexibly to produce advanced functional devices. Here we propose the concept of conformal surface plasmons (CSPs), surface plasmon waves that can propagate on ultrathin and flexible films to long distances in a wide broadband range from microwave to mid-infrared frequencies. We present the experimental realization of these CSPs in the microwave regime on paper-like dielectric films with a thickness 600-fold smaller than the operating wavelength. The flexible paper-like films can be bent, folded, and even twisted to mold the flow of CSPs.

Far-field imaging beyond diffraction limit using single sensor in combination with a resonant aperture.

Far-field imaging beyond the diffraction limit is a long sought-after goal in various imaging applications, which requires usually mechanical scanning or an array of antennas. Here, we propose to solve this challenging problem using a single sensor in combination with a spatio-temporal resonant aperture antenna. We theoretically and numerically demonstrate that such resonant aperture antenna is capable of converting part evanescent waves into propagating waves and delivering them to far fields. The proposed imaging concept provides the unique ability to achieve super resolution for real-time data when illuminated by broadband electromagnetic waves, without the harsh requirements such as near- field scanning, mechanical scanning, or antenna arrays. We expect the imaging methodology to make breakthroughs in super-resolution imaging in microwave, terahertz, optical, and ultrasound regimes.

Trapping surface plasmon polaritons on ultrathin corrugated metallic strips in microwave frequencies.

It has been demonstrated that an ultrathin uniformly corrugated metallic strip is a good plasmonic waveguide in microwave and terahertz frequencies to propagate spoof surface plasmon polaritons (SPPs) with well confinement and small loss (Shen et al., PNAS 110, 40-45, 2013). Here, we propose a simple method to trap SPP waves on the ultrathin corrugated metallic strips in broad band in the microwave frequencies. By properly designing non-uniform corrugations with gradient-depth grooves, we show that the SPP waves are slowed down gradually and then reflected at pre-designed positions along the ultrathin metallic strip when the frequency varies. We design and fabricate the ultrathin gradient-corrugation metallic strip on a thin dielectric film. Both numerical simulation and measurement results validate the efficient trapping of SPP waves in broadband from 9 to 14 GHz. This proposal is a promising candidate for slow-wave devices in both microwave and terahertz regimes.

Generation of spatial Bessel beams using holographic metasurface.

We propose to use backward radiations of leaky waves supported by a holographic metasurface to produce spatial Bessel beams in the microwave frequency regime. The holographic metasurface consists of a grounded dielectric slab and a series of metal patches. By changing the size of metal patches, the surface-impedance distribution of the holographic metasurface can be modulated, and hence the radiation properties of the leaky waves can be designed to realize Bessel beams. Both numerical simulations and experiments verify the features of spatial Bessel beams, which may be useful in imaging applications or wireless power transmissions with the dynamic focal-depth controls.