A luminescent poly(amidoamine)-iridium complex as a new singlet-oxygen sensitizer for photodynamic therapy.

A polymer complex (1P) was synthesized by binding bis(cyclometalated) Ir(ppy)2(+) fragments (ppy = 2-phenylpyridyl) to phenanthroline (phen) pendants of a poly(amidoamine) copolymer (PhenISA, in which the phen pendants involved ∼6% of the repeating units). The corresponding molecular complex [Ir(ppy)2(bap)](+) (1M, bap = 4-(butyl-4-amino)-1,10-phenanthroline) was also prepared for comparison. In water solution 1P gives nanoaggregates with a hydrodynamic diameter of 30 nm in which the lipophilic metal centers are presumed to be segregated within polymer tasks to reduce their interaction with water. Such confinement, combined with the dilution of triplet emitters along the polymer chains, led to 1P having a photoluminescence quantum yield greater than that of 1M (0.061 vs 0.034, respectively, in an aerated water solution) with a longer lifetime of the (3)MLCT excited states and a blue-shifted emission (595 nm vs 604 nm, respectively). NMR data supported segregation of the metal centers. Photoreaction of O2 with 1,5-dihydroxynaphthalene showed that 1P is able to sensitize (1)O2 generation but with half the quantum yield of 1M. Cellular uptake experiments showed that both 1M and 1P are efficient cell staining agents endowed with two-photon excitation (TPE) imaging capability. TPE microscopy at 840 nm indicated that both complexes penetrate the cellular membrane of HeLa cells, localizing in the perinuclear region. Cellular photodynamic therapy tests showed that both 1M and 1P are able to induce cell apoptosis upon exposure to Xe lamp irradiation. The fraction of apoptotic cells for 1M was higher than that for 1P (74 and 38%, respectively) 6 h after being irradiated for 5 min, but cells incubated with 1P showed much lower levels of necrosis as well as lower toxicity in the absence of irradiation. More generally, the results indicate that cell damage induced by 1M was avoided by binding the iridium sensitizers to the poly(amidoamine).

Dinuclear rhenium complexes as redox-active pendants in a novel electrodeposited polycyclopentadithiophene material.

The novel [Re2(µ-H)(µ-OOC-CPDT)(CO)6(µ-3-Me-pydz)] complex (1; OOC-CPDT = 4H-cyclopenta[2,1-b:3,4-b']dithiophene-4-carboxylate, 3-Me-pydz = 3-methylpyridazine) has been prepared and characterized by single-crystal X-ray diffraction, density functional theory (DFT), and time-dependent DFT computations, UV-vis absorption and emission spectroscopy, and cyclic voltammetry (CV). The measured properties indicate the lack of electronic communication in the ground state between the CPDT and the rhenium diazine moieties. Oxidative electropolymerization of 1, achieved by repeated potential cycling (-0.4 to +1.0 V vs Fc(+)/Fc, in acetonitrile) with different supporting electrolytes, on different electrodes, afforded an electroactive and stable metallopolymer (poly-1). In situ measurements of the mass of the growing film (on a gold electrode, with an electrochemical quartz microbalance) confirmed the regularity of the polymerization process. The polymer exhibits two reversible oxidation peaks of the thiophene chain and a broad irreversible reduction peak (-1.4 V, quite close to that observed for the reduction of monomer 1), associated with a remarkably delayed sharp return peak, of comparable associated charge, appearing in close proximity (+0.3 V) to the first oxidation peak of the neutral polythiophene chain. This charge-trapping effect can be observed upon repeated cycles of p and n doping, and the negative charge is maintained even if the charged electrode is removed from the solution for many hours. Electrochemical impedance spectroscopy showed that the main CV oxidation peak corresponds to facile charge transfer, combined with very fast diffusion of both electrons and ions within the polymer. In summary, poly-1 provides a new example of a metallopolymer, in which the conductive properties of the π-conjugated system are added to the redox behavior of the pendant-isolated complexes.

Electrochemical, computational, and photophysical characterization of new luminescent dirhenium-pyridazine complexes containing bridging OR or SR anions.

A series of [Re(2)(µ-ER)(2)(CO)(6)(µ-pydz)] complexes have been synthesized (E = S, R = C(6)H(5), 2; E = O, R = C(6)F(5), 3; C(6)H(5), 4; CH(3), and 5; H, 6), starting either from [Re(CO)(5)O(3)SCF(3)] (for 2 and 4), [Re(2)(µ-OR)(3)(CO)(6)](-) (for 3 and 5), or [Re(4)(µ(3)-OH)(4)(CO)(12)] (for 6). Single-crystal diffractometric analysis showed that the two µ-phenolato derivatives (3 and 4) possess an idealized C(2) symmetry, while the µ-benzenethiolato derivative (2) is asymmetrical, because of the different conformation adopted by the phenyl groups. A combined density functional and time-dependent density functional study of the geometry and electronic structure of the complexes showed that the lowest unoccupied molecular orbital (LUMO) and LUMO+1 are the two lowest-lying π* orbitals of pyridazine, whereas the highest occupied molecular orbitals (HOMOs) are mainly constituted by the "t(2g)" set of the Re atoms, with a strong Re-(µ-E) π* character. The absorption spectra have been satisfactorily simulated, by computing the lowest singlet excitation energies. All the complexes exhibit one reversible monoelectronic reduction centered on the pyridazine ligand (ranging from -1.35 V to -1.53 V vs Fc(+)|Fc). The benzenethiolato derivative 2 exhibits one reversible two-electron oxidation (at 0.47 V), whereas the OR derivatives show two close monoelectronic oxidation peaks (ranging from 0.85 V to 1.35 V for the first peak). The thioderivative 2 exhibits a very small electrochemical energy gap (1.9 eV, vs 2.38-2.70 eV for the OR derivatives), and it does not show any photoluminescence. The complexes containing OR ligands show from moderate to poor photoluminescence, in the range of 608-708 nm, with quantum yields decreasing (ranging from 5.5% to 0.07%) and lifetimes decreasing (ranging from 550 ns to 9 ns) (3 > 4 > 6 ≈ 5) with increasing emission wavelength. The best emitting properties, which are closely comparable to those of the dichloro complex (1), are exhibited by the pentafluorophenolato derivative (3).

Luminescent rhenium and ruthenium complexes of an amphoteric poly(amidoamine) functionalized with 1,10-phenanthroline.

A new amphoteric copolymer, PhenISA, has been obtained by copolymerization of 4-(4'-aminobutyl)-1,10-phenanthroline (BAP) with 2-methylpiperazine and bis(acrylamido)acetic acid (BAC) (6% of phenanthroline-containing repeating units). The copolymer showed excellent solubility in water, where it self-aggregated to give clear nanoparticle suspensions (hydrodynamic diameter = 21 ± 2 nm, by dynamic light scattering (DLS) analysis). The phenanthroline pendants of the polymer stably coordinated either Re(CO)(3)(+) or Ru(phen)(2)(2+) fragments, affording luminescent Re-PhenISA, Re-Py-PhenISA, and Ru-PhenISA polymer complexes, emitting from triplet metal-to-ligand charge transfer ((3)MLCT) excited states (with λ(em) = 608, 571, and 614 nm, respectively, and photoluminescence quantum yields Φ(em) = 0.7%, 4.8%, and 4.1%, in aerated water solution, respectively). DLS analyses indicated that the polymer complexes maintained the nanosize of PhenISA. All the complexes were stable under physiological conditions (pH 7.4, 0.15 M NaCl) in the presence of an excess of the ubiquitous competitor cysteine. In vitro viability assays showed no toxicity of Re-Py-PhenISA and Ru-PhenISA complexes, at concentrations in the range of 0.5-50 µM (calculated on the metal-containing unit), toward HEK-293 (human embryonic kidney) cells. A preliminary investigation of internalization in HEK-293 cells, by means of fluorescence confocal microscopy, showed that Ru-PhenISA enters cells via an endocytic pathway and, subsequently, homogeneously diffuse within the cytoplasm across the vesicle membranes.

Highly emitting concomitant polymorphic crystals of a dinuclear rhenium complex.

The dinuclear complex [Re(2)(µ-Cl)(2)(CO)(6)(µ-4,5-(Me(3)Si)(2)pyridazine)] gives in the solid state two polymorphs (yellow, 1Y, and orange, 1O), which can be either concomitantly or separately obtained on varying the crystallization rate. Both crystal phases exhibit intense photoluminescence from the lowest lying triplet metal-to-ligand charge transfer state, much stronger than in solution (quantum yields 0.56 and 0.52, for 1O and 1Y respectively, vs 0.06 in toluene), likely due to the restricted rotation of the Me(3)Si groups in the solid state. A clean, irreversible 1O → 1Y single-crystal-to-single-crystal phase transition occurs at 443 K, as revealed by variable temperature X-ray diffraction analysis. In spite of the absence of any strong intermolecular interactions in both forms, 1O and 1Y show very different absorption and emission maxima (λ(abs) 370 and 393 nm, λ(em) 534 and 570 nm, for 1Y and 1O, respectively). This behavior highlights the importance of the local organization of molecular dipoles in perturbing the photophysical properties of the molecule in the crystal.

Tricarbonyl-rhenium complexes of a thiol-functionalized amphoteric poly(amidoamine).

An amphoteric thiol-functionalized poly(amidoamine) nicknamed ISA23SH(10%) was synthesized. Rhenium complexes 1 and 2, containing 0.5 and 0.8 equiv of rhenium, respectively, were easily obtained by reacting ISA23SH(10%) with [Re(CO)(3)(H(2)O)(3)](CF(3)SO(3)) in aqueous solution at pH 5.5. Both ISA23SH(10%), and its rhenium complexes were soluble in water under physiological conditions. The resultant solutions were stable, even in the presence of cysteine. Rhenium chelation occurred through the S and N atoms of the cysteamine moiety, as demonstrated by (1)H, (13)C, and (15)N NMR spectroscopy. The diffusion coefficients and the hydrodynamic radii of ISA23SH(10%) and complex 1 were determined by pulsed gradient spin echo (PGSE) NMR experiments. The radius of the rhenium complexes 1 and 2 was always slightly larger than that of the parent polymer. TEM analysis showed that both complexes form spherical nanoparticles with narrow size distributions. Consistent results were obtained by dynamic light scattering. The observed sizes were in good agreement with those evaluated by PGSE. Preliminary in vitro and in vivo biological studies have been performed on complexes 1 and 2 as well as on the parent ISA23SH(10%). Neither hemolytic activity of the two rhenium complexes and the parent polymer, up to a concentration of 5 mg/mL, nor cytotoxic effects were observed on Hela cell after 48 h at a concentration of 100 ng/mL. In vivo toxicological tests showed that ISA23SH(10%) is highly biocompatible, with a maximum tolerated dose (MTD) of 500 mg/kg. No toxic side effects were apparent after the intravenous injection in mice of the two rhenium complexes in doses up to 20 mg/kg.

Tricarbonyl rhenium(I) complexes containing a bridging 2,5-diphenyl-1,3,4-oxadiazole ligand: structural, spectroscopic, electrochemical, and computational characterization.

The three complexes [Re2(mu-X1)(mu-X2)(CO)6(mu-ppd-kappaN3:kappaN4)] (X1, X2 ) H, 1; X1 ) H, X2 ) Cl, 2; X1, X2 ) Cl, 3; ppd) 2,5-diphenyl-1,3,4-oxadiazole) have been synthesized by different routes, involving the reaction of [Re4(mu3-H)4(CO)12]with ppd for 1, the reaction of 1 with HCl for 2, and the reaction of [ReCl(CO)5] with ppd for 3. The three complexes possess a different number of valence electrons, so the formal Re-Re bond order varies from 2 to 1 to 0 in complexes 1, 2, and 3, respectively. This is reflected in the Re-Re bond distance (277.9, 297.9, and 358.5 pm in the same series)and in the stability of the complexes in the coordinating solvent acetonitrile (t1/2 for ppd displacement 13.6, 4.5, and 3.7 h,for 1, 2, and 3, respectively). Both experimental and calculated structures indicates that coordination induces a distortion from planarity of the diphenyloxadiazole moiety due to the interaction of the equatorial carbonyls with the bridging ppd,which increases on going from 1 to 2 to 3 (dihedral angle between the oxadiazole and the phenyl rings 18.4 degrees, 23.3 degrees, and 45.0 degrees, respectively). The UV spectra show pi-pi* transitions of the oxadiazole ligand (which shift to higher energy on increasing the distortion from the planarity, from 252 to 267 nm) and metal-to-ligand charge transfer absorptions (from 300 to 362 nm). Upon irradiation between 340 and 380 nm, complex 2 only features a weak broad emission at 527 nm(phi)0.02%), whereas upon excitation at 300 nm, the emission typical of free ppd is observed, suggesting photodissociation.Cyclic voltammetry investigations in acetonitrile showed that the three complexes exhibit ligand-centered irreversible reduction peaks (from -1.83 to -1.93 V vs Fc+|Fc), shifted to more positive values with respect to free ppd (-2.50 V). The shift however is smaller than in the analogous derivatives containing 1,2-diazines, suggesting a smaller electron depletion of the heterocycle ligand upon coordination. The complexes also show a metal-centered, bi-electronic, irreversible oxidation peak (from 1.05 to 1.37 V vs Fc+/Fc). A combined density functional and time-dependent density functional (TD DFT)study allowed us to understand the factors affecting the stability of the three complexes and to rationalize their electrochemical and photophysical properties in terms of their electronic structure.

Luminescent supramolecular soft nanostructures from amphiphilic dinuclear Re(I) complexes.

Luminescent metallo-surfactants based on highly emissive dinuclear Re(I) complexes have been synthesized combining the peculiar photophysical behaviour of this class of neutral hydrophobic complexes with new properties imparted by hydrophilic chains anchored on the coordinated chromophoric ligand. In solution, the resulting neutral amphiphiles tend to self-assembly in soft structures. The aggregation properties have been thoroughly investigated in dioxane-water mixtures, where all the complexes assembly in globular-like supramolecular architectures with well-defined size (hydrodynamic diameter = 200-400 nm). The morphology of these nano-objects has been completely characterized with Dynamic Light Scattering (DLS) analysis, Scanning Transmission Electron Microscopy (STEM) and cryo-TEM to determine the size, polydispersity, and stability of the nanoparticles in relationship with the structure of the metallo-surfactants. The photophysical properties of both the isolated metal complexes and their aggregates have been investigated by means of UV-Vis absorption, steady-state and time-resolved emission spectroscopy. Noteworthy, the self-assembly properties of the reported luminescent rhenium metallo-amphiphiles can be modulated by solvent polarity. Even more importantly, such aggregation process yielded a small hypsochromic shift of the emission energy accompanied by a sizeable elongation of the excited-state lifetime and an enhancement of the photoluminescence quantum yield, reaching a remarkably high value of 0.20 despite the air-equilibrated aqueous condition. The presented findings endorse novel possibilities for the efficient use of soft-nanostructures based on metallo-amphiphiles in dual (electron and optical microscopy) bio-imaging applications and theranostics where the non-covalent nature of the intermolecular interactions would offer the powerful and unique possibility to reversibly assemble and disassemble imaging agents.

[Re5 (µ-H)4 (CO)20 ]- and [Re5 (µ-H)5 (CO)20 ], Two Isolobal Analogues of Cyclopentane.

The first five-membered rings of metal atoms connected by M-M or M-H-M bonds only have been obtained by a Re2 +Re3 condensation in which a polyhydride acts as a bridging bidentate ligand toward a coordinatively unsaturated fragment (see scheme below). In spite of the octahedral coordination of the Re centers, the Re5 rings display conformations (twisted and envelope) comparable with those observed for organic five-membered rings of tetrahedral carbon atoms.

Superparamagnetic iron oxide nanoparticles stabilized by a poly(amidoamine)-rhenium complex as potential theranostic probe.

Three-component nanocomposites, constituted by a superparamagnetic iron oxide core coated with a polymeric surfactant bearing tightly bound Re(CO)3 moieties, were prepared and fully characterized. The water soluble and biocompatible surfactant was a linear poly(amidoamine) copolymer (PAA), containing cysteamine pendants in the minority part (ISA23SH), able to coordinate Re(CO)3 fragments. For the synthesis of the nanocomposites two methods were compared, involving either (i) peptization of bare magnetite nanoparticles by interaction with the preformed ISA23SH-Re(CO)3 complex, or (ii) "one-pot" synthesis of iron oxide nanoparticles in the presence of the ISA23SH copolymer, followed by complexation of Re to the SPIO@ISA23SH nanocomposite. Full characterization by TEM, DLS, TGA, SQUID, and relaxometry showed that the second method gave better results. The magnetic cores had a roundish shape, with low dispersion (mean diameter ca. 6 nm) and a tendency to form larger aggregates (detected both by TEM and DLS), arising from multiple interactions of the polymeric coils. Aggregation did not affect the stability of the nano-suspension, found to be stable for many months without precipitate formation. The SPIO@PAA-Re nanoparticles (NPs) showed superparamagnetic behaviour and nuclear relaxivities similar or superior to commercial MRI contrast agents (CAs), which make them promising as MRI "negative" CAs. The possibility to encapsulate (186/188)Re isotopes (γ and ß emitters) gives these novel NPs the potential to behave as bimodal nanostructures devoted to theranostic applications.

Phosphorescent organic light-emitting diodes with outstanding external quantum efficiency using dinuclear rhenium complexes as dopants.

The photophysical and electroluminescence properties of two dinuclear rhenium(I) carbonyl complexes bearing 1,2-diazines are comprehensively investigated. The bromo-bridged complex is successfully used as triplet emitter for the preparation of vacuum-processed OLEDs with outstanding external quantum efficiencies, reaching a value of 10%.

Aggregation induced colour change for phosphorescent iridium(III) complex-based anionic surfactants.

We describe a new class of water soluble metallosurfactant molecules based on luminescent neutral iridium(III) complexes. The compounds possess an alkyl chain terminated with a negatively charged group, a sulphate. Due to their amphiphilic nature they assemble in aggregates in water and their photophysical properties, as well as the morphological characterization of the assemblies are presented. In particular, UV-Vis absorption, steady-state and time-resolved emission spectroscopy, dynamic light scattering and scanning electron microscopy techniques have been employed towards the analysis of the assemblies in different media. Comparison with the single components shows that the aggregates have very different photophysical properties. Importantly, the change in colour upon self-assembly is a remarkable feature which could be used for the design of probes which can change properties in different environments.

Luminescent conjugates between dinuclear rhenium(I) complexes and peptide nucleic acids (PNA) for cell imaging and DNA targeting.

New luminescent dinuclear rhenium(I) tricarbonyl complex-PNA conjugates have been synthesized through a reliable solid-phase synthetic methodology. Their photophysical properties have been measured. The most luminescent Re-PNA conjugate 7 showed interesting two-photon absorption (TPA) properties, that were exploited for imaging experiments, to demonstrate its easy uptake into living cells.

A new class of luminescent tricarbonyl rhenium(I) complexes containing bridging 1,2-diazine ligands: electrochemical, photophysical, and computational characterization.

A novel class of luminescent tricarbonyl rhenium(I) complexes of general formula [Re2(mu-X)2(CO)6(mu-diaz)] (X=halogen and diaz=1,2-diazine) was prepared by reacting [ReX(CO)5] with 0.5 equiv of diazine (seven different ligands were used). The bridging coordination of the diazine in these dinuclear complexes was confirmed by single-crystal X-ray analysis. Cyclic voltammetry in acetonitrile showed for all the complexes (but the phthalazine derivative) a chemically and electrochemically reversible ligand-centered reduction, as well as a reversible metal-centered bielectronic oxidation. With respect to the prototypical luminescent [ReCl(CO)3(bpy)] complex, the oxidation is more difficult and the reduction easier (about +0.3 V), so that a similar highest occupied molecular orbital-lowest unoccupied molecular orbital gap is observed. All of the complexes exhibit photoluminescence at room temperature in solution, with broad unstructured emission from metal-to-ligand charge-transfer states, at lambda in the range 579-620 nm. Lifetimes (tau=20-2200 ns) and quantum yields (Phi up to 0.12) dramatically change upon varying the bridging ligand X and the diazine substituents: in particular, quantum yields decrease in the series Cl, Br, and I and in the presence of substituents at the alpha positions of the pyridazine ring. A combined density functional and time-dependent density functional study of the geometry, relative stability, electronic structure, and photophysical properties of all the pyridazine derivatives was performed. The nature of the excited states involved in the electronic absorption spectra was ascertained, and trends in the energy of the highest occupied and lowest unoccupied molecular orbitals upon changing the pyridazine substituents and the bridging halogen ligands were discussed. The observed emission properties of these complexes were shown to be related to a combination of steric and electronic factors affecting their ground-state geometry and their stability.

[Re2(micro-1,2,4-triazolate)2(micro-OH)(CO)6]-: a novel metalloligand for the construction of flexible porous coordination networks.

The [Re2(micro-trz-kappaN1:kappaN2)2(micro-OH)(CO)6]- (trz = 1,2,4-triazolate) organometallic anion reacts with Ag+ to afford a 2D organometallic/coordination network, [Ag[Re2(micro3-trz-kappaN1:kappaN2:kappaN4)2(micro3-OH)(CO)6]]n x 4nCH3OH, which shows dynamic structural changes triggered by solid-liquid guest exchange processes.

NMR investigation of the dihydrogen-bonding and proton-transfer equilibria between the hydrido carbonyl anion [HRe2(CO)9]- and fluorinated alcohols.

The interaction of fluorinated alcohols with the anionic hydrido complex [HRe2(CO)9]- (1) has been investigated by NMR spectroscopy. According to the acidic strength of the alcohols, the interaction may result not only in the formation of dihydrogen-bonded ROH...[HRe2(CO)9]- adducts 2, but also in proton transfer to give the neutral species [H2Re2(CO)9] (3). With the weaker acid trifluoroethanol (TFE) evidence for the occurrence of the dihydrogen-bonding equilibrium was obtained by 2D 1H NOESY. The dependence of the hydride chemical shift on TFE concentration at different temperatures provided values for the constants of this equilibrium, from which the thermodynamic parameters were evaluated as deltaH(degrees) = -2.6(2) kcal mol(-1), deltaS(degrees) = -9.3(2) cal mol(-1) K(-1). This corresponds to a rather low basicity factor (E(j) = 0.64). Variable-temperature T1 measurements allowed the proton-hydride distance in adduct 2 a to be estimated (1.80 angstroms). In the presence of hexafluoroisopropyl alcohol (HFIP) simultaneous occurrence of both dihydrogen-bonding and proton-transfer equilibria was observed, and the equilibria shifted versus the protonated product 3 with increasing HFIP concentration and decreasing temperature. Reversible proton transfer between the alcohol and the hydrido complex occurs on the NMR timescale, as revealed by a 2D 1H EXSY experiment at 240 K. For the more acidic perfluoro-tert-butyl alcohol (PFTB) the protonation equilibrium was further shifted to the right. Thermal instability of 3 prevented the acquisition of accurate thermodynamic data for these equilibria. The occurrence of the proton-transfer processes (in spite of the unfavorable pK(a) values) can be explained by the formation of homoconjugated RO...HOR- pairs which stabilize the alcoholate anions.

Luminescent hydrido-carbonyl clusters of rhenium containing bridging 1,2-diazine ligands.

The reaction of the electronically unsaturated (56 valence electrons, ve) tetrahedral cluster [Re4(mu3-H)4(CO)12] (1) with pyridazine (pydz) gives as the main initial product the tetranuclear cluster [Re4(mu-H)4(mu-pydz)(pydz)2(CO)12] (2a), with 64 ve and four hydrogen-bridged metal-metal interactions, with a spiked-triangle geometry. One of the three pydz ligands bridges, in a cis configuration, the cluster edge opposite to the vertex bearing the spike, as indicated by the X-ray single-crystal analysis. This species slowly decomposes, affording the dinuclear unsaturated (32 ve) complex [Re2(mu-H)2(mu-pydz)(CO)6] (3a) and two isomers of the tetranuclear cluster [Re4(mu-H)4(mu-pydz)2(CO)12] (64 ve), sharing an unusual square cluster geometry and differing in the trans (major, 85%, 4a) or cis (4a') configuration of the bridging pydz ligands. The structures of 3a and 4a have been ascertained by X-ray analysis, while the characterization of 4a' was hampered by its instability (slowly transforming into 3a in THF solution). Both the dimer and the square cluster 4a are also formed directly (and quickly) from 1, being present in solution since the beginning of the reaction. Cluster 4a is the main final reaction product. The reaction with phthalazine follows a similar course, with some differences in the relative amount of the final products 3b and 4b. Most of the novel complexes are able to emit light in solution at room temperature, and photophysical measurements were performed in CH2Cl2 solution on the main stable reaction products (i.e., the dinuclear species 3a and 3b and the trans square clusters 4a and 4b). The emission was in the range of 580-645 nm, from MLCT excited states, with lifetimes on the order of a hundred nanoseconds (50-473 ns). The quantum yields were 1 order of magnitude higher for the squares (1.7 and 1.3% for 4a and 4b, respectively, in CH2Cl2) than for the dinuclear complexes ( approximately 0.1%). In the case of 4a, a blue shift and an increase of the emission intensity were observed upon decreasing the solvent polarity.

A Re(CO)5 fragment bonded to a polyhedral oligomeric hydroxysilsesquioxane as a model which gives further evidence to the existence of an unexpected Re(CO)5 surface species.

Reaction of Re(CO)5O3SCF3 with (c-C6H11)7Si8O12O-Li+ at 273 K under a CO atmosphere affords the [Re(CO)5OR] (R = (c-C6H11)7Si8O12) derivative (1). 1 is the first example of a rhenium pentacarbonyl bearing an OR ligand (R = alkyl, aryl, or silyl) stable enough to be characterized, and it represents also the first molecular model of the surface [Re(CO)5OSi] species formed by reductive carbonylation of silica-supported [Re(CO)3OH]4. At room temperature, 1 loses one carbonyl ligand and dimerizes to afford {Re(CO)4[(mu-O)O12Si8(c-C6H11)7]}2 (2), which has been characterized by X-ray diffraction and is the first reported example of a rhenium tetracarbonyl mu-oxo-bridged dimer of the type [Re(CO)4(mu-OR)]2.

Synthesis and reactivity of N-heterocycle-B(C6F5)3 complexes. 4. Competition between pyridine- and pyrrole-type substrates toward B(C6F5)3: structure and dynamics of 7-B(C6F5)3-7-azaindole and [7-Azaindolium]+[HOB(C6F5)3]-.

Reaction between 7-azaindole and B(C6F5)3 quantitatively yields 7-(C6F5)3B-7-azaindole (4), in which B(C6F5)3 coordinates to the pyridine nitrogen of 7-azaindole, leaving the pyrrole ring unreacted even in the presence of a second equivalent of B(C6F5)3. Reaction of 7-azaindole with H2O-B(C6F5)3 initially produces [7-azaindolium]+[HOB(C6F5)3]- (5) which slowly converts to 4 releasing a H2O molecule. Pyridine removes the borane from the known complexes (C6F5)3B-pyrrole (1) and (C6F5)3B-indole (2), with formation of free pyrrole or indole, giving the more stable adduct (C6F5)3B-pyridine (3). The competition between pyridine and 7-azaindole for the coordination with B(C6F5)3 again yields 3. The molecular structures of compounds 4 and 5 have been determined both in the solid state and in solution and compared to the structures of other (C6F5)3B-N-heterocycle complexes. Two dynamic processes have been found in compound 4. Their activation parameters (DeltaH = 66 (3) kJ/mol, DeltaS = -18 (10) J/mol K and DeltaH = 76 (5) kJ/mol, DeltaS = -5 (18) J/mol K) are comparable with those of other (C6F5)3B-based adducts. The nature of the intramolecular interactions that result in such energetic barriers is discussed.