VEGF-mediated angiogenesis and vascularization of a fumarate-crosslinked polycaprolactone (PCLF) scaffold.

PURPOSE: Revascularization of natural and synthetic scaffolds is a critical part of the scaffold's incorporation and tissue ingrowth. Our goals were to create a biocompatible polymer scaffold with 3D-printing technology, capable of sustaining vascularization and tissue ingrowth. METHODS: We synthesized biodegradable polycaprolactone fumarate (PCLF) scaffolds to allow tissue ingrowth via large interconnected pores. The scaffolds were prepared with Poly(lactic-co-glycolic acid)(PLGA) microspheres seeded with or without different growth factors including VEGF,FGF-2, and/or BMP-2. Scaffolds were implanted into the subcutaneous tissues of rats before undergoing histologic and microCT angiographic analysis. RESULTS: At harvest after 12 weeks, scaffolds had tissue infiltrating into their pores without signs of scar tissue formation, fibrous capsule formation, or immune responses against PCLF. Histology for M1/M2 macrophage phenotypes confirmed that there were no overt signs of immune responses. Both microCT angiography and histologic analysis demonstrated marked tissue and vessel ingrowth throughout the pores traversing the body of the scaffolds. Scaffolds seeded with microspheres containing VEGF or VEGF with either BMP-2 or FGF-2 had significantly higher vascular ingrowth and vessel penetration than controls. All VEGF-augmented scaffolds were positive for Factor-VIII and exhibited collagen tissue infiltration throughout the pores. Furthermore, scaffolds with VEGF and BMP-2 had high levels of mineral deposition throughout the scaffold that are attributable to BMP-2. CONCLUSIONS: PCLF polymer scaffold can be utilized as a framework for vascular ingrowth and regeneration of multiple types of tissues. This novel scaffold material has promise in tissue regeneration across all types of tissues from soft tissue to bone.

Fibroblast growth factor-2 and vascular endothelial growth factor mediated augmentation of angiogenesis and bone formation in vascularized bone allotransplants.

We previously demonstrated recipient-derived neoangiogenesis to maintain viability of living bone allogeneic transplants without long-term immunosuppression. The effect of cytokine delivery to enhance this process is studied. Vascularized femur transplantation was performed from Dark Agouti to Piebald Virol Glaxo rats. Poly(d,l-lactide-co-glycolide) microspheres loaded with buffer (N = 11), basic fibroblast growth factor (FGF2) (N = 10), vascular endothelial growth factor (VEGF) (N = 11), or both (N = 11) were inserted intramedullarly alongside a recipient-derived arteriovenous bundle. FK-506 was administered for 2 weeks. At 18 weeks, bone blood flow, microangiography, histologic, histomorphometric, and alkaline phosphatase measurements were performed. Bone blood flow was greater in the combined group than control and VEGF groups (P = 0.04). Capillary density was greater in the FGF2 group than in the VEGF and combined groups (P < 0.05). Bone viability, growth, and alkaline phosphatase activity did not vary significantly between groups. Neoangiogenesis in vascularized bone allotransplants is enhanced by angiogenic cytokine delivery, with results using FGF2 that are comparable to isotransplant from previous studies. Further studies are needed to achieve bone formation similar to isotransplants.

Enhanced cell ingrowth and proliferation through three-dimensional nanocomposite scaffolds with controlled pore structures.

We present enhanced cell ingrowth and proliferation through cross-linked three-dimensional (3D) nanocomposite scaffolds fabricated using poly(propylene fumarate) (PPF) and hydroxyapatite (HA) nanoparticles. Scaffolds with controlled internal pore structures were produced from computer-aided design (CAD) models and solid freeform fabrication (SFF) technique, while those with random pore structures were fabricated by a NaCl leaching technique for comparison. The morphology and mechanical properties of scaffolds were characterized using scanning electron microscopy (SEM) and mechanical testing, respectively. Pore interconnectivity of scaffolds was assessed using X-ray microcomputed tomography (micro-CT) and 3D imaging analysis. In vitro cell studies have been performed using MC3T3-E1 mouse preosteoblasts and cultured scaffolds in a rotating-wall-vessel bioreactor for 4 and 7 days to assess cell attachment, viability, ingrowth depth, and proliferation. The mechanical properties of cross-linked nanocomposite scaffolds were not significantly different after adding HA or varying pore structures. However, pore interconnectivity of PPF/HA nanocomposite scaffolds with controlled pore structures has been significantly increased, resulting in enhanced cell ingrowth depth 7 days after cell seeding. Cell attachment and proliferation are also higher in PPF/HA nanocomposite scaffolds. These results suggest that cross-linked PPF/HA nanocomposite scaffolds with controlled pore structures may lead to promising bone tissue engineering scaffolds with excellent cell proliferation and ingrowth.

Development of electrically conductive oligo(polyethylene glycol) fumarate-polypyrrole hydrogels for nerve regeneration.

Electrically conductive hydrogel composites consisting of oligo(polyethylene glycol) fumarate (OPF) and polypyrrole (PPy) were developed for applications in nerve regeneration. OPF-PPy scaffolds were synthesized using three different anions: naphthalene-2-sulfonic acid sodium salt (NSA), dodecylbenzenesulfonic acid sodium salt (DBSA), and dioctyl sulfosuccinate sodium salt (DOSS). Scaffolds were characterized by ATR-FTIR, XPS, AFM, dynamic mechanical analysis, electrical resistivity measurements, and swelling experiments. OPF-PPy scaffolds were shown to consist of up to 25 mol % polypyrrole with a compressive modulus ranging from 265 to 323 kPa and a sheet resistance ranging from 6 to 30 × 10(3) Ohms/square. In vitro studies using PC12 cells showed OPF-PPy materials had no cytotoxicity and PC12 cells showed distinctly better cell attachment and an increase in the percent of neurite bearing cells on OPF-PPy materials compared to OPF. The neurite lengths of PC12 cells were significantly higher on OPF-PPyNSA and OPF-PPyDBSA. These results show that electrically conductive OPF-PPy hydrogels are promising candidates for future applications in nerve regeneration.

Effect of Biomaterial Electrical Charge on Bone Morphogenetic Protein-2-Induced In Vivo Bone Formation.

IMPACT STATEMENT: Biomaterials can play a dual role in bone regeneration: they enable local sustained delivery of growth factors, such as bone morphogenetic protein-2 (BMP-2), while they provide structural support as scaffold. By better imitating the properties of native bone tissue, scaffolds may be both osteoconductive and osteoinductive. The latter can be achieved by modifying the electrical charge of the surface. The present work uses tunable oligo[(polyethylene glycol) fumarate] hydrogel and demonstrates that negative charge enhances BMP-2-induced bone formation compared with neutral or positive charge. Altogether, this indicates that tissue-specific surface charge modifications of biomaterials hold great promise in the field of tissue regeneration.

Effect of hydrogel porosity on marrow stromal cell phenotypic expression.

This study describes investigation of porous photocrosslinked oligo[(polyethylene glycol) fumarate] (OPF) hydrogels as potential matrix for osteoblastic differentiation of marrow stromal cells (MSCs). The porosity and interconnectivity of porous hydrogels were assessed using magnetic resonance microscopy (MRM) as a noninvasive investigative tool that could image the water construct inside the hydrogels at a high-spatial resolution. MSCs were cultured onto the porous hydrogels and cell number was assessed using PicoGreen DNA assay. Our results showed 10% of cells initially attached to the surface of scaffolds. However, cells did not show significant proliferation over a time period of 14 days. MSCs cultured on porous hydrogels had increased alkaline phosphatase activity as well as deposition of calcium, suggesting successful differentiation and maturation to the osteoblastic phenotype. Moreover, continued expression of type I collagen and osteonectin over 14 days confirmed osteoblastic differentiation of MSCs. MRM was also applied to monitor osteogenesis of MSCs on porous hydrogels. MRM images showed porous scaffolds became consolidated with osteogenic progression of cell differentiation. These findings indicate that porous OPF scaffolds enhanced MSC differentiation leading to development of bone-like mineralized tissue.

GDNF Schwann cells in hydrogel scaffolds promote regional axon regeneration, remyelination and functional improvement after spinal cord transection in rats.

Positively-charged oligo[poly(ethylene glycol)fumarate] (OPF+ ) is a biodegradable hydrogel used for spinal cord injury repair. We compared scaffolds containing primary Schwann cells (SCs) to scaffolds delivering SCs genetically modified to secrete high concentrations of glial cell-derived neurotrophic factor (GDNF). Multichannel OPF+ scaffolds loaded with SCs or GDNF-SCs were implanted into transected rat spinal cords for 4 weeks. GDNF-SCs promoted regeneration of more axons into OPF+ scaffolds (2773.0 ± 396.0) than primary SC OPF+ scaffolds (1666.0 ± 352.2) (p = 0.0491). This increase was most significant in central and ventral-midline channels of the scaffold. Axonal remyelination was quantitated by stereologic analysis. Increased myelination of regenerating axons was observed in the GDNF-SC group. Myelinating cell and axon complexes were formed by host SCs and not by implanted cells or host oligodendrocytes. Fast Blue retrograde tracing studies determined the rostral-caudal directionality of axonal growth. The number of neurons that projected axons rostrally through the GDNF-SC scaffolds was higher (7929 ± 1670) than in animals with SC OPF+ scaffolds (1069 ± 241.5) (p < 0.0001). The majority of ascending axons were derived from neurons located more than 15 mm from the scaffold-cord interface, and were identified to be lumbosacral intraspinal motor neurons. Transected animals with GDNF-SC OPF+ scaffolds partially recovered locomotor function at weeks 3 and 4 following surgery. Copyright © 2017 John Wiley & Sons, Ltd.

In Vitro and In Vivo Correlation of Bone Morphogenetic Protein-2 Release Profiles from Complex Delivery Vehicles.

Local sustained delivery of bioactive molecules from biomaterials is a promising strategy to enhance bone regeneration. To optimize delivery vehicles for bone formation, the design characteristics are tailored with consequential effect on bone morphogenetic protein-2 (BMP-2) release and bone regeneration. Complying with the 3R principles (Replacement, Reduction, and Refinement), the growth factor release is often investigated in vitro using several buffers to mimic the in vivo physiological environment. However, this remains an unmet need. Therefore, this study investigates the in vitro-in vivo correlation (IVIVC) of BMP-2 release from complex delivery vehicles in several commonly used in vitro buffers: cell culture model, phosphate buffered saline, and a strong desorption buffer. The results from this study showed that the release environment affected the BMP-2 release profiles, creating distinct relationships between release versus time and differences in extent of release. According to the guidance set by the U.S. Food and Drug Administration (FDA), IVIVC resulted in level A internal predictability for individual composites. Since the IVIVC was influenced by the BMP-2 loading method and composite surface chemistry, the external predictive value of the IVIVCs was limited. These results show that the IVIVCs can be used for predicting the release of an individual composite. However, the models cannot be used for predicting in vivo release for different composite formulations since they lack external predictability. Potential confounding effects of drug type, delivery vehicle formulations, and application site should be added to the equation to develop one single IVIVC applicable for complex delivery vehicles. Altogether, these results imply that more sophisticated in vitro systems should be used in bone regeneration to accurately discriminate and predict in vivo BMP-2 release from different complex delivery vehicles.

A Combination of a Polycaprolactone Fumarate Scaffold with Polyethylene Terephthalate Sutures for Intra-Articular Ligament Regeneration.

Intra-articular ligamentous injuries are typically unrepairable and have limited outcomes after graft reconstruction. A combination of porous polycaprolactone fumarate (PCLF) scaffolds with polyethylene terephthalate (PET) sutures was developed with the goal of regenerating intra-articular ligaments. Scaffolds were fabricated by injecting PCLF over three-dimensional-printed molds containing two strands of PET suture down its central pore followed by cross-linking. Scaffolds were seeded with human mesenchymal stem cells (MSCs) from adipose tissue. To demonstrate cell attachment and proliferation in culture, we performed live/dead staining and cell proliferation assays. These experiments showed that MSCs remain viable and continue to proliferate on the scaffolds in culture for at least 2 weeks. Bare scaffolds were then used to reconstruct the rabbit anterior-cruciate ligament (ACL), while control rabbits underwent semitendinosus autograft reconstruction. The specimens underwent micro-computed tomography (CT) imaging, histological examination, and biomechanical testing at 8 weeks. The ultimate pull-out strength of the PCLF-PET scaffolds and tendon autografts was initially 72 ± 30 N and to 45 ± 10 N, respectively (p < 0.06). On inspection after 8 weeks in vivo, the intra-articular portion of the PCLF-PET scaffolds was fragmented while the tendon autografts remained intact. Cross-sectional areas of bone tunnels in the PCLF-PET scaffolds (11.3 ± 1 mm2) were enlarged compared to tendon autografts (3.8 ± 0.5 mm2) (p < 0.004) as measured by micro-CT. These studies show that PET-reinforced PCLF scaffolds are capable of initial ACL reconstruction and supports stem cell growth. The intra-articular portion of the scaffold may need to be re-engineered to support their use in ligament regeneration.

Bone morphogenetic protein-2 release profile modulates bone formation in phosphorylated hydrogel.

The optimal release profile of locally delivered bone morphogenetic protein-2 (BMP-2) for safe and effective clinical application is unknown. In this work, the effect of differential BMP-2 release on bone formation was investigated using a novel biomaterial oligo[(polyethylene glycol) fumarate] bis[2-(methacryloyloxy) ethyl] phosphate hydrogel (OPF-BP) containing poly(lactic-co-glycolic acid) microspheres. Three composite implants with the same biomaterial chemistry and structure but different BMP-loading methods were created: BMP-2 encapsulated in microspheres (OPF-BP-Msp), BMP-2 encapsulated in microspheres and adsorbed on the phosphorylated hydrogel (OPF-BP-Cmb), and BMP-2 adsorbed on the phosphorylated hydrogel (OPF-BP-Ads). These composites were compared with the clinically used BMP-2 carrier, Infuse® absorbable collagen sponge (ACS). Differential release profiles of bioactive BMP-2 were achieved by these composites. In a rat subcutaneous implantation model, OPF-BP-Ads and ACS generated a large BMP-2 burst release (>75%), whereas a more sustained release was seen for OPF-BP-Msp and OPF-BP-Cmb (~25% and 50% burst, respectively). OPF-BP-Ads generated significantly more bone than did all other composites, and the bone formation was 12-fold higher than that of the clinically used ACS. Overall, this study clearly shows that BMP-2 burst release generates more subcutaneous bone than do sustained release in OPF-BP-microsphere composites. Furthermore, composites should not only function as a delivery vehicle but also provide a proper framework to achieve appropriate bone formation.

Chondrocyte Attachment, Proliferation, and Differentiation on Three-Dimensional Polycaprolactone Fumarate Scaffolds.

Current treatment options for cartilage injuries are limited. The goals of this study are to create a biodegradable polymer scaffold with the capabilities of sustaining chondrocyte growth and proliferation, enable cell-to-cell communication and tissue regeneration through large pores, and assess the biological augmentation of the scaffold capabilities using platelet lysate (PL). We synthesized biodegradable polycaprolactone fumarate (PCLF) scaffolds to allow cell-cell communication through large interconnected pores. Molds were printed using a three-dimensional printer and scaffolds synthesized through UV crosslinking. Culture medium included alpha modified Eagle's media with either 10% fetal bovine serum (FBS) or 5% PL, a mixture of platelet release products, after being seeded onto scaffolds through a dynamic bioreactor. Assays included cellular proliferation (MTS), toxicity and viability (live/dead immunostaining), differentiation (glycosaminoglycan [GAG], alkaline phosphatase [ALP], and total collagen), and immunostaining for chondrogenic markers collagen II and Sox 9 (with collagen I as a negative control). The large interconnected pores (500 and 750 µm) enable cell-to-cell communication and cellular infiltration into the scaffolds, as the cells remained viable and proliferated for 2 weeks. Chondrocytes cultured in PL showed increased rates of proliferation when compared with FBS. The chondrogenic markers GAG and total collagen contents increased over 2 weeks at each time point, whereas the osteogenic marker ALP did not significantly change. Immunostaining at 2 and 4 weeks for the expression of chondrogenic markers Collagen II and Sox 9 was increased when compared with control human fibroblasts. These results show that the PCLF polymer scaffold enables chondrocytes to attach, proliferate, and retain their chondrogenic phenotypes, demonstrating potential in chondrocyte engineering and cartilage regeneration.

Three-Dimension-Printed Porous Poly(Propylene Fumarate) Scaffolds with Delayed rhBMP-2 Release for Anterior Cruciate Ligament Graft Fixation.

Anterior cruciate ligament (ACL) ruptures reconstructed with tendon grafts are commonly fixed with bioabsorbable implants, which are frequently complicated by incomplete bone filling upon degradation. Bone regeneration after ACL reconstruction could be enhanced by utilizing tissue engineering techniques and three-dimensional (3D) printing to create a porous bioabsorbable scaffold with delayed delivery of recombinant-human bone morphogenetic protein 2 (rhBMP-2). The first aim of this study was to design a 3D poly(propylene fumarate) (PPF) porous scaffold that maintained suitable pullout strength for future testing in a rabbit ACL reconstruction model. Our second aim was to determine the release kinetics of rhBMP-2 from PPF scaffolds that utilized both calcium-phosphate coatings and growth factor delivery on microspheres, both of which have been shown to decrease the initial burst release of rhBMP-2 and increase bone regeneration. To determine the degree of scaffold porosity that maintained suitable pullout strength, tapered scaffolds were fabricated with increasing porosity (0%, 20%, 35%, and 44%) and pullout testing was performed in a cadaveric rabbit ACL reconstruction model. Scaffolds were coated with carbonate hydroxyapatite (synthetic bone mineral [SBM]), and radiolabeled rhBMP-2 was delivered in four different experimental groups as follows: Poly(lactic-co-glycolic acid) microspheres only, microspheres and collagen (50:50), collagen only, and saline solution only. rhBMP-2 release was measured at day 1, 2, 4, 8, 16, and 32. The microsphere delivery groups had a smaller burst release and released a smaller percentage of rhBMP-2 over the 32 days than the collagen and saline only groups. In conclusion, a porous bioabsorbable scaffold with suitable strength for a rabbit ACL reconstruction was developed. Combining a synthetic bone mineral coating with microspheres had an additive effect, decreasing the initial burst release and cumulative release of rhBMP-2. Future studies need to evaluate this scaffold's fixation strength and bone filling capabilities in vivo compared to traditional bioabsorbable implants.

Controlled Delivery of Vancomycin via Charged Hydrogels.

Surgical site infection (SSI) remains a significant risk for any clean orthopedic surgical procedure. Complications resulting from an SSI often require a second surgery and lengthen patient recovery time. The efficacy of antimicrobial agents delivered to combat SSI is diminished by systemic toxicity, bacterial resistance, and patient compliance to dosing schedules. We submit that development of localized, controlled release formulations for antimicrobial compounds would improve the effectiveness of prophylactic surgical wound antibiotic treatment while decreasing systemic side effects. Our research group developed and characterized oligo(poly(ethylene glycol)fumarate)/sodium methacrylate (OPF/SMA) charged copolymers as biocompatible hydrogel matrices. Here, we report the engineering of this copolymer for use as an antibiotic delivery vehicle in surgical applications. We demonstrate that these hydrogels can be efficiently loaded with vancomycin (over 500 µg drug per mg hydrogel) and this loading mechanism is both time- and charge-dependent. Vancomycin release kinetics are shown to be dependent on copolymer negative charge. In the first 6 hours, we achieved as low as 33.7% release. In the first 24 hours, under 80% of total loaded drug was released. Further, vancomycin release from this system can be extended past four days. Finally, we show that the antimicrobial activity of released vancomycin is equivalent to stock vancomycin in inhibiting the growth of colonies of a clinically derived strain of methicillin-resistant Staphylococcus aureus. In summary, our work demonstrates that OPF/SMA hydrogels are appropriate candidates to deliver local antibiotic therapy for prophylaxis of surgical site infection.

Biostability and macrophage-mediated foreign body reaction of silicone-modified polyurethanes.

In this study, the effect of soft segment chemistry on the phase morphology and in vivo response of commercial-grade poly(ether urethane) (PEU), silicone-modified PEU (PEU-S), poly(carbonate urethane) (PCU), and silicone-modified PCU (PCU-S) elastomers were examined. Silicone-modified polyurethanes were developed to combine the biostability of silicone with the mechanical properties of PEUs. Results from the infrared spectroscopy confirmed the presence of silicone at the surface of the PEU-S and PCU-S films. Atomic force microscopy phase imaging indicated that the overall two-phase morphology of PEUs, necessary for its thermoplastic elastomeric properties, was not disrupted by the silicone modification. After material characterization, the in vivo foreign body response and biostability of the polyurethanes were studied using a subcutaneous cage implant protocol. The results from the cage implant study indicated that monocytes adhere, differentiate to macrophages which fuse to form foreign body giant cells on all of the polyurethanes. However, the silicone-modified surfaces promoted apoptosis of adherent macrophages at 4 days and high levels of macrophage fusion after 21 days. These results confirm that the surface of a biomaterial may influence the induction of apoptosis of adherent macrophages in vivo and are consistent with previous cell culture studies of these materials. This study validates the use of our standard cell culture protocol to predict in vivo behavior and further supports the hypothesis that interleukin-4 is the primary mediator of macrophage fusion and foreign body giant cell formation in vivo. The impact of these findings on the biostability of polyurethanes is the subject of current investigations. Attenuated total reflectance-Fourier transform infrared analysis of explanted specimens provided evidence of chain scission and crosslinking at the surface of all of the polyurethanes. The silicone modification did not fully inhibit the oxidative biodegradation of the polyether or polycarbonate soft segments; however, the rate of chain scission of PEU-S and PCU-S seemed to be slower than the control polyurethanes. To verify this finding and to quantify the rate of chain scission in order to predict long-term biostability, an in vitro environment that simulated the microenvironment at the adherent cell-material interface was used to accelerate the biodegradation of the polyurethanes. Polyurethane films were treated in vitro for up to 36 days in 20% hydrogen peroxide/0.1M cobalt chloride solution at 37 degrees Celsius. Characterization with attenuated total reflectance-Fourier transform infrared and scanning electron microscopy showed soft segment and hard segment degradation consistent with the chemical changes observed after long-term in vivo treatment. The biostability ranking of these four materials based on rate of chain scission and surface pitting was as follows: PEU < PEU-S PCU < PCU-S. The silicone modification increased the biostability of the PEU and PCU elastomers while maintaining the thermoplastic elastomeric properties.

Nanocomposite bone scaffolds based on biodegradable polymers and hydroxyapatite.

In tissue engineering, development of an osteoconductive construct that integrates with host tissue remains a challenge. In this work, the effect of bone-like minerals on maturation of pre-osteoblast cells was investigated using polymer-mineral scaffolds composed of poly(propylene fumarate)-co-poly(caprolactone) (PPF-co-PCL) and nano-sized hydroxyapatite (HA). The HA of varying concentrations was added to an injectable formulation of PPF-co-PCL and the change in thermal and mechanical properties of the scaffolds was evaluated. No change in onset of degradation temperature was observed due to the addition of HA, however compressive and tensile moduli of copolymer changed significantly when HA amounts were increased in composite formulation. The change in mechanical properties of copolymer was found to correlate well to HA concentration in the constructs. Electron microscopy revealed mineral nucleation and a change in surface morphology and the presence of calcium and phosphate on surfaces was confirmed using energy dispersive X-ray analysis. To characterize the effect of mineral on attachment and maturation of pre-osteoblasts, W20-17 cells were seeded on HA/copolymer composites. We demonstrated that cells attached more to the surface of HA containing copolymers and their proliferation rate was significantly increased. Thus, these findings suggest that HA/PPF-co-PCL composite scaffolds are capable of inducing maturation of pre-osteoblasts and have the potential for use as scaffold in bone tissue engineering.

Repair of osteochondral defects in the minipig model by OPF hydrogel loaded with adipose-derived mesenchymal stem cells.

AIM: Critical knee osteochondral defects in seven adult minipigs were treated with oligo(polyethylene glycol)fumarate (OPF) hydrogel combined with autologous or human adipose-derived stem cells (ASCs), and evaluated after 6 months. METHODS: Four defects were made on the peripheral part of right trochleas (n = 28), and treated with OPF scaffold alone or pre-seeded with ASCs. RESULTS: A better quality cartilage tissue characterized by improved biomechanical properties and higher collagen type II expression was observed in the defects treated by autologous or human ASC-loaded OPF; similarly this approach induced the regeneration of more mature bone with upregulation of collagen type I expression. CONCLUSION: This study provides the evidence that both porcine and human adipose-derived stem cells associated to OPF hydrogel allow improving osteochondral defect regeneration in a minipig model.

Positively Charged Oligo[Poly(Ethylene Glycol) Fumarate] Scaffold Implantation Results in a Permissive Lesion Environment after Spinal Cord Injury in Rat.

Positively charged oligo[poly(ethylene glycol) fumarate] (OPF+) scaffolds loaded with Schwann cells bridge spinal cord injury (SCI) lesions and support axonal regeneration in rat. The regeneration achieved is not sufficient for inducing functional recovery. Attempts to increase regeneration would benefit from understanding the effects of the scaffold and transplanted cells on lesion environment. We conducted morphometric and stereological analysis of lesions in rats implanted with OPF+ scaffolds with or without loaded Schwann cells 1, 2, 3, 4, and 8 weeks after thoracic spinal cord transection. No differences were found in collagen scarring, cyst formation, astrocyte reactivity, myelin debris, or chondroitin sulfate proteoglycan (CSPG) accumulation. However, when scaffold-implanted animals were compared with animals with transection injuries only, these barriers to regeneration were significantly reduced, accompanied by increased activated macrophages/microglia. This distinctive and regeneration permissive tissue reaction to scaffold implantation was independent of Schwann cell transplantation. Although the tissue reaction was beneficial in the short term, we observed a chronic fibrotic host response, resulting in scaffolds surrounded by collagen at 8 weeks. This study demonstrates that an appropriate biomaterial scaffold improves the environment for regeneration. Future targeting of the host fibrotic response may allow increased axonal regeneration and functional recovery.

Effect of calcium phosphate coating and rhBMP-2 on bone regeneration in rabbit calvaria using poly(propylene fumarate) scaffolds.

Various calcium phosphate based coatings have been evaluated for better bony integration of metallic implants and are currently being investigated to improve the surface bioactivity of polymeric scaffolds. The aim of this study was to evaluate the role of calcium phosphate coating and simultaneous delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) on the in vivo bone regeneration capacity of biodegradable, porous poly(propylene fumarate) (PPF) scaffolds. PPF scaffolds were coated with three different calcium phosphate formulations: magnesium-substituted ß-tricalcium phosphate (ß-TCMP), carbonated hydroxyapatite (synthetic bone mineral, SBM) and biphasic calcium phosphate (BCP). In vivo bone regeneration was evaluated by implantation of scaffolds in a critical-sized rabbit calvarial defect loaded with different doses of rhBMP-2. Our data demonstrated that scaffolds with each of the calcium phosphate coatings were capable of sustaining rhBMP-2 release and retained an open porous structure. After 6weeks of implantation, micro-computed tomography revealed that the rhBMP-2 dose had a significant effect on bone formation within the scaffolds and that the SBM-coated scaffolds regenerated significantly greater bone than BCP-coated scaffolds. Mechanical testing of the defects also indicated restoration of strength in the SBM and ß-TCMP with rhBMP-2 delivery. Histology results demonstrated bone growth immediately adjacent to the scaffold surface, indicating good osteointegration and osteoconductivity for coated scaffolds. The results obtained in this study suggest that the coated scaffold platform demonstrated a synergistic effect between calcium phosphate coatings and rhBMP-2 delivery and may provide a promising platform for the functional restoration of large bone defects.

Ligament Tissue Engineering Using a Novel Porous Polycaprolactone Fumarate Scaffold and Adipose Tissue-Derived Mesenchymal Stem Cells Grown in Platelet Lysate.

PURPOSE: Surgical reconstruction of intra-articular ligament injuries is hampered by the poor regenerative potential of the tissue. We hypothesized that a novel composite polymer "neoligament" seeded with progenitor cells and growth factors would be effective in regenerating native ligamentous tissue. METHODS: We synthesized a fumarate-derivative of polycaprolactone fumarate (PCLF) to create macro-porous scaffolds to allow cell-cell communication and nutrient flow. Clinical grade human adipose tissue-derived human mesenchymal stem cells (AMSCs) were cultured in 5% human platelet lysate (PL) and seeded on scaffolds using a dynamic bioreactor. Cell growth, viability, and differentiation were examined using metabolic assays and immunostaining for ligament-related markers (e.g., glycosaminoglycans [GAGs], alkaline phosphatase [ALP], collagens, and tenascin-C). RESULTS: AMSCs seeded on three-dimensional (3D) PCLF scaffolds remain viable for at least 2 weeks with proliferating cells filling the pores. AMSC proliferation rates increased in PL compared to fetal bovine serum (FBS) (p < 0.05). Cells had a low baseline expression of ALP and GAG, but increased expression of total collagen when induced by the ligament and tenogenic growth factor fibroblast growth factor 2 (FGF-2), especially when cultured in the presence of PL (p < 0.01) instead of FBS (p < 0.05). FGF-2 and PL also significantly increased immunostaining of tenascin-C and collagen at 2 and 4 weeks compared with human fibroblasts. SUMMARY: Our results demonstrate that AMSCs proliferate and eventually produce a collagen-rich extracellular matrix on porous PCLF scaffolds. This novel scaffold has potential in stem cell engineering and ligament regeneration.

Surface chemistry mediates adhesive structure, cytoskeletal organization, and fusion of macrophages.

Surface chemistry modulates many critical functions of monocyte/macrophages such as adhesion, fusion, spreading, phagocytosis, and secretion. In this study, we investigated the effect of silicone modification on adhesive structure development and cytoskeletal reorganization of adherent macrophages on polyurethanes. Confocal scanning laser microscopy (CSLM) was used for qualitative and quantitative evaluation of cytoskeletal reorganization of adherent macrophages. Data presented here showed less spreading for adherent cells on silicone-modified materials due to the higher hydrophobicity and protein adsorption profile. This decrease in spreading was accompanied by less F-actin content in adherent cells on silicone-modified polyurethanes and PDMS control, indicating that silicone modification reduces the strength of adhesion. With the addition of interleukin-4 (IL-4) at days 3 and 7 to our culture, adherent cell morphology dramatically changed. The change in morphology led to higher macrophage fusion and foreign body giant cell (FBGC) formation on silicone modified materials after 10 days. In addition, mannose receptor (MR) expression was up-regulated on the silicone-modified polyurethanes and PDMS control in the presence of IL-4. Up-regulation of MR expression suggests an alternatively activated phenotype for adherent macrophages, which is accompanied with an attenuated proinflammatory cytokine production and reactive oxygen secretion. It appears that silicone modification accelerates acquisition of an alternative macrophage and FBGC phenotype, which may then result in increased polyurethane biostability.