RESUMO
The strongly electron-donating N-heterocyclic imines (NHIs) have been employed as excellent surface anchors for the thermodynamic stabilization of electron-deficient species due to their enhanced nucleophilicity. However, the binding mode and interfacial property of these new ligands are still unclear, representing a bottleneck for advanced applications in surface functionalization and catalysis. Here, NHIs with different side groups have been rationally designed, synthesized, and analyzed on various metal surfaces (Cu, Ag). Our results reveal different binding modes depending on the molecular structure and metal surface. The molecular design enables us to achieve a flat-lying or upright configuration and even a transition between these two binding modes depending on the coverage and time. Importantly, the two binding modes exhibit different degrees of interfacial charge transfer between the molecule and the surface. This study provides essential microscopic insight into the NHI adsorption geometry and interfacial charge transfer for the optimization of heterogeneous catalysts in coordination chemistry.
RESUMO
A coordination-induced trigger for catalytic activity is proposed on an N-heterocyclic carbene (NHC)-decorated ceria catalyst incorporating Cr and Rh (ICy-r-Cr0.19Rh0.06CeOz). ICy-r-Cr0.19Rh0.06CeOz was prepared by grafting 1,3-dicyclohexylimidazol-2-ylidene (ICy) onto H2-reduced Cr0.19Rh0.06CeOz (r-Cr0.19Rh0.06CeOz) surfaces, which went on to exhibit substantial catalytic activity for the 1,4-arylation of cyclohexenone with phenylboronic acid, whereas r-Cr0.19Rh0.06CeOz without ICy was inactive. FT-IR, Rh K-edge XAFS, XPS, and photoluminescence spectroscopy showed that the ICy carbene-coordinated Rh nanoclusters were the key active species. The coordination-induced trigger for catalytic activity on the ICy-bearing Rh nanoclusters could not be attributed to electronic donation from ICy to the Rh nanoclusters. DFT calculations suggested that ICy controlled the adsorption sites of the phenyl group on the Rh nanocluster to promote the C-C bond formation of the phenyl group and cyclohexenone.
RESUMO
Surface modification of indium tin oxide (ITO) electrodes with organic molecules is known to tune their work function which results in higher charge carrier selectivity in corresponding organic electronic devices and hence influences the performance of organic solar cells. In recent years, N-heterocyclic carbenes (NHCs) have also been proven to be capable to modify the work function of metals and semimetals compared to the unfunctionalized surface via the formation of strong covalent bonds. In this report, we have designed and performed the modification of the ITO surface with NHC by using the zwitterionic bench stable IPr-CO2 as the NHC precursor, applied via spin coating. Upon modification, the work function of ITO electrodes was reduced significantly which resulted in electron selective contacts in corresponding organic photovoltaic devices. In addition, various characterization techniques and analytical methods are used to elucidate the nature of the bound species and the corresponding binding mechanism of the material to the ITO surface.
RESUMO
The adsorption of N-heterocyclic olefins (NHOs) on silicon is investigated in a combined scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory study. We find that both of the studied NHOs bind covalently, with ylidic character, to the silicon adatoms of the substrate and exhibit good thermal stability. The adsorption geometry strongly depends on the N-substituents: for large N-substituents, an upright adsorption geometry is favored, while a flat-lying geometry is found for the NHO with smaller wingtips. These different geometries strongly influence the quality and properties of the obtained monolayers. The upright geometry leads to the formation of ordered monolayers, whereas the flat-lying NHOs yield a mostly disordered, but denser, monolayer. The obtained monolayers both show large work function reductions, as the higher density of the flat-lying monolayer is found to compensate for the smaller vertical dipole moments. Our findings offer new prospects in the design of tailor-made ligand structures in organic electronics and optoelectronics, catalysis, and material science.
RESUMO
Tuning the properties of oxide surfaces through the adsorption of designed ligands is highly desirable for several applications, such as catalysis. N-Heterocyclic carbenes (NHCs) have been successfully employed as ligands for the modification of metallic surfaces. On the other hand, their potential as modifiers of ubiquitous oxide surfaces still needs to be developed. Here we show that a model NHC binds covalently to a copper oxide surface under UHV conditions. In particular, we report the first example of a covalent bond between NHCs and oxygen atoms from the oxide layer. This study demonstrates that NHC can also act as a strong anchor on oxide surfaces.
RESUMO
Heterogeneous palladium catalysts modified by N-heterocyclic carbenes (NHCs) are shown to be highly effective toward the direct synthesis of hydrogen peroxide (H2O2), in the absence of the promoters which are typically required to enhance both activity and selectivity. Catalytic evaluation in a batch regime demonstrated that through careful selection of the N-substituent of the NHC it is possible to greatly enhance catalytic performance when compared to the unmodified analogue and reach concentrations of H2O2 rivaling that obtained by state-of-the-art catalysts. The enhanced performance of the modified catalyst, which is retained upon reuse, is attributed to the ability of the NHC to electronically modify Pd speciation.
Assuntos
Compostos Heterocíclicos , Paládio , Catálise , Peróxido de Hidrogênio , Metano/análogos & derivadosRESUMO
Using light as an external stimulus to alter the reactivity of Lewis bases is an intriguing tool for controlling chemical reactions. Reversible photoreactions associated with pronounced reactivity changes are particularly valuable in this regard. We herein report the first photoswitchable nitrogen superbases based on guanidines equipped with a photochromic dithienylethene unit. The resulting N-heterocyclic imines (NHIs) undergo reversible, near quantitative electrocyclic isomerization upon successive exposure to UV and visible irradiation, as demonstrated over multiple cycles. Switching between the ring-opened and ring-closed states is accompanied by substantial pKa shifts of the NHIs by up to 8.7 units. Since only the ring-closed isomers are sufficiently basic to activate CO2 via the formation of zwitterionic Lewis base adducts, cycling between the two isomeric states enables the light-controlled capture and release of CO2 .
RESUMO
N-Heterocyclic carbenes (NHCs) have superior properties as building blocks of self-assembled monolayers (SAMs). Understanding the influence of the substrate in the molecular arrangement is a fundamental step before employing these ligands in technological applications. Herein, we study the molecular arrangement of a model NHC on Cu(100) and Cu(111). While mostly disordered phases appear on Cu(100), on Cu(111) well-defined structures are formed, evolving from magic-number islands to molecular ribbons with coverage. This work presents the first example of magic-number islands formed by NHC assemblies on flat surfaces. Diffusion and commensurability are key factors explaining the observed arrangements. These results shed light on the molecule-substrate interaction and open the possibility of tuning nanopatterned structures based on NHC assemblies.
RESUMO
Self-assembly of cyclohexyl cyclic (alkyl)(amino)carbenes (cyCAAC) can be realized and reversibly switched from a close-packed trimer phase to a chainlike dimer phase, enabled by the ring-flip of the cyclohexyl wingtip. Multiple methods including scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations identified a distinct isomer (axial or equatorial chair conformer) in each phase, and consequently support the conclusion regarding the determination of molecular surface geometry on the self-assembly of cyCAAC. Moreover, various substrates such as Ag (111) and Cu (111) are tested to elucidate the importance of cyCAAC-surface interactions on cyCAAC based nanopatterns. These investigations of patterned surfaces prompted a deep understanding of cyCAAC binding mode, surface geometry and reversible self-assembly, which are of paramount significance in the areas of catalysis, biosensor design and surface functionalization.
RESUMO
Herein, we describe the formation of quaternary carbon centers with excellent diastereoselectivity via a strain-release protocol. An organometallic species is generated by Cp*Rh(III)-catalyzed C-H activation, which is then coupled with strained bicyclobutanes (BCBs) and a prochiral carbon electrophile in a three-component reaction. This work illustrates a rare example of BCBs in transition metal catalysis and demonstrates their broad potential to access novel reaction pathways. The method developed exhibits ample functional group tolerance, and the products can be further transformed into valuable α-quaternary ß-lactones. Preliminary mechanistic investigations suggest a twofold C-C bond cleavage sequence involving σ-bond insertion and an ensuing ß-carbon elimination event.
RESUMO
The C-C bond formation reaction represents a fundamental and important transformation in synthetic chemistry, and exploring new types of C-C bond formation reactions is recognized as appealing, yet challenging. Herein, we disclose the first example of rhodium-catalyzed dealkenylative arylation of alkenes with arylboronic compounds, thereby providing an unconventional access to bi(hetero)aryls with excellent chemoselectivity. In this method, C(aryl)-C(alkenyl) and C(alkenyl)-C(alkenyl) bonds in various alkenes and 1,3-dienes can be cleaved via a hydrometalation and followed by ß-carbon elimination pathway for Suzuki-Miyaura reactions. Furthermore, a series of novel organic fluorescent molecules with excellent photophysical properties has been efficiently constructed with this protocol.
RESUMO
Hydroarylation is an effective strategy to rapidly increase the complexity of organic structures by transforming flat alkene moieties into three-dimensional frameworks. Many strategies have already been developed to achieve the hydroarylation of styrenes, however most of these reports examine the hydroarylation of unpolar, ß-mono- or ß-unsubstituted styrenes, while exploring mainly electron-rich benzene nucleophiles. Herein, we report a mild and general catalytic system for the selective hydroheteroarylation of multiply substituted styrenes and heteroaromatic styrenes. Mechanistic analysis of the reaction led to the discovery of commercially available 2,2':5',2''-terthiophene as a key reagent.
RESUMO
A novel photoresponsive and fully conjugated N-heterocyclic carbene (NHC) has been synthesized that combines the excellent photophysical properties of arylazopyrazoles (AAPs) with an NHC that acts as a robust surface anchor (AAP-BIMe). The formation of self-assembled monolayers (SAMs) on gold was proven by ToF-SIMS and XPS, and the organic film displayed a very high stability at elevated temperatures. This stability was also reflected in a high desorption energy, which was determined by temperature-programmed SIMS measurements. E-/Z-AAP-BIMe@Au photoisomerization resulted in reversible alterations of the surface energy (i.e. wettability), the surface potential (i.e. work function), and the conductance (i.e. resistance). The effects could be explained by the difference in the dipole moment of the isomers. Furthermore, sequential application of a dummy ligand by microcontact printing and subsequent backfilling with AAP-BIMe allowed its patterning on gold. To the best of our knowledge, this is the first example of a photoswitchable NHC on a gold surface. These properties of AAP-BIMe@Au illustrate its suitability as a molecular switch for electronic devices.
RESUMO
Herein, we report the redox-neutral, intermolecular, and highly branch-selective amidation of allylic C-H bonds enabled by Cp*IrIII catalysis. A variety of readily available carboxylic acids were converted into the corresponding dioxazolones and efficiently coupled with terminal and internal olefins in high yields and selectivities. Mechanistic investigations support the formation of a nucleophilic IrIII -allyl intermediate rather than the direct insertion of an Ir-nitrenoid species into the allylic C-H bond.
RESUMO
The synthesis and properties of photoswitchable electron-rich phosphines containing N-heterocyclic imines equipped with a photochromic dithienylethene unit are reported. Heteronuclear NMR spectroscopy and UV/vis studies reveal that the imine substituents undergo reversible electrocyclic ring-closing and ring-opening reactions upon exposure to UV and visible light, respectively. The photoisomerization alters the electron-donating ability of the phosphines by up to ΔTEP = 8 cm-1.
RESUMO
N-Heterocyclic carbene (NHC)-modified planar gold surfaces (NHC@Au) were found to be more susceptible toward wet chemical etching than undecorated surface areas. Site-selective decoration of NHCs on Au was achieved by microcontact printing (µCP) of the NHC precursors 1,3-bis(diisopropylphenyl)imidazol-3-ium hydrogen carbonate (IPr(H)[HCO3]) or 1,3-dimethylbenzimidazol-3-ium hydrogen carbonate (BIMe(H)[HCO3]). Strikingly, BIMe@Au showed concentration-dependent etching behavior, tunable from a positive resist to a negative resist. Surface patterning was verified by time-of-flight secondary-ion mass spectrometry and Kelvin probe force microscopy. Moreover, orthogonal µCP enabled the patterned functionalization of planar Au with both IPr and 1-eicosanethiol and the subsequent formation of three-dimensional structures with a single etching step. The selective removal of Au by functionalization with a surface ligand is unprecedented and enables novel applications of NHCs in materials chemistry and nanofabrication.
RESUMO
ß-Amino acids are frequently found as important components in numerous biologically active molecules, drugs and natural products. In particular, they are broadly utilized in the construction of bioactive peptides and peptidomimetics, thanks to their increased metabolic stability. Despite the number of methodologies established for the preparation of ß-amino acid derivatives, the majority of these methods require metal-mediated multistep manipulations of prefunctionalized substrates. Here we disclose a metal-free, energy-transfer enabled highly regioselective intermolecular aminocarboxylation reaction for the single-step installation of both amine and ester functionalities into alkenes or (hetero)arenes. A bifunctional oxime oxalate ester was developed to simultaneously generate C-centred ester and N-centred iminyl radicals. This mild method features a remarkably broad substrate scope (up to 140 examples) and excellent tolerance of sensitive functional groups, and substrates that range from the simplest ethylene to complex (hetero)arenes can participate in the reaction, thus offering a general and practical access to ß-amino acid derivatives.
Assuntos
Produtos Biológicos , Peptidomiméticos , Alcenos , Aminas , Aminoácidos/química , Ésteres , Etilenos , Oxalatos , OximasRESUMO
N-Heterocyclic carbenes (NHCs) are promising modifiers and anchors for surface functionalization and offer some advantages over thiol-based systems. Because of their strong binding affinity and high electron donation, NHCs can dramatically change the properties of the surfaces to which they are bonded. Highly ordered NHC monolayers have so far been limited to metal surfaces. Silicon, however, remains the element of choice in semiconductor devices and its modification is therefore of utmost importance for electronic industries. Here, a comprehensive study on the adsorption of NHCs on silicon is presented. We find covalently bound NHC molecules in an upright adsorption geometry and demonstrate the formation of highly ordered monolayers exhibiting good thermal stability and strong work function reductions. The structure and ordering of the monolayers is controlled by the substrate geometry and reactivity and in particular by the NHC side groups. These findings pave the way towards a tailor-made organic functionalization of silicon surfaces and, thanks to the high modularity of NHCs, new electronic and optoelectronic applications.