RESUMO
To date, defect-tolerance electronic structure of lead halide perovskite nanocrystals is limited to an optical feature in the visible range. Here, we demonstrate that IR sensitization of formamidinium lead iodine (FAPI) nanocrystal array can be obtained by its doping with PbS nanocrystals. In this hybrid array, absorption comes from the PbS nanocrystals while transport is driven by the perovskite which reduces the dark current compared to pristine PbS. In addition, we fabricate a field-effect transistor using a high capacitance ionic glass made of hybrid FAPI/PbS nanocrystal arrays. We show that the hybrid material has an n-type nature with an electron mobility of 2 × 10-3 cm2 V-1 s-1. However, the dark current reduction is mostly balanced by a loss of absorption. To overcome this limitation, we couple the FAPI/PbS hybrid to a guided mode resonator that can enhance the infrared light absorption.
RESUMO
The gating of nanocrystal films is currently driven by two approaches: either the use of a dielectric such as SiO2 or the use of electrolyte. SiO2 allows fast bias sweeping over a broad range of temperatures but requires a large operating bias. Electrolytes, thanks to large capacitances, lead to the significant reduction of operating bias but are limited to slow and quasi-room-temperature operation. None of these operating conditions are optimal for narrow-band-gap nanocrystal-based phototransistors, for which the necessary large-capacitance gate has to be combined with low-temperature operation. Here, we explore the use of a LaF3 ionic glass as a high-capacitance gating alternative. We demonstrate for the first time the use of such ionic glasses to gate thin films made of HgTe and PbS nanocrystals. This gating strategy allows operation in the 180 to 300 K range of temperatures with capacitance as high as 1 µF·cm-2. We unveil the unique property of ionic glass gate to enable the unprecedented tunability of both magnitude and dynamics of the photocurrent thanks to high charge-doping capability within an operating temperature window relevant for infrared photodetection. We demonstrate that by carefully choosing the operating gate bias, the signal-to-noise ratio can be improved by a factor of 100 and the time response accelerated by a factor of 6. Moreover, the good transparency of LaF3 substrate allows back-side illumination in the infrared range, which is highly valuable for the design of phototransistors.
RESUMO
The predominance of interface resistance makes current crowding ubiquitous in short channel organic electronics devices but its impact on spin transport has never been considered. We investigate electrochemically doped nanoscale PBTTT short channel devices and observe the smallest reported values of crowding lengths, found for sub-100 nm electrodes separation. These observed values are nevertheless exceeding the spin diffusion lengths reported in the literature. We discuss here how current crowding can be taken into account in the framework of the Fert-Jaffrès model of spin current propagation in heterostructures, and predict that the anticipated resulting values of magnetoresistance can be significantly reduced. Current crowding therefore impacts spin transport applications and interpretation of the results on spin valve devices.
RESUMO
Interparticle charge hopping severely limits the integration of colloidal nanocrystals films for optoelectronic device applications. We propose here to overcome this problem by using high aspect ratio interconnects made of wide electrodes separated by a few tens of namometers, a distance matching the size of a single nanoplatelet. The semiconducting CdSe/CdS nanoplatelet coupling with such electrodes allows an efficient electron-hole pair dissociation despite the large binding energy of the exciton, resulting in optimal photoconductance responsivity. We report the highest responsivity obtained so far for CdSe colloidal material with values reaching kA·W(-1), corresponding to eight decades of enhancement compared to usual micrometer-scaled architectures. In addition, a decrease of 1 order of magnitude of the current noise is observed, revealing the reduced influence of the surface traps on transport. The nanotrench geometry provides top access to ion gel electrolyte gating, allowing for a photoresponsive transistor with 10(4) on/off ratio. A simple analytical model reproduces the device behavior and underlines the key parameters related to its performance.
RESUMO
Integration of nanoparticles (NPs) into nanodevices is a challenge for enhanced sensor development. Using NPs as building blocks, a bottom-up approach based on one-pot morphogen-driven electroclick chemistry is reported to self-construct dense and robust conductive Fe3O4 NP films. Deposited covalent NP assemblies establish an electrical connection between two gold electrodes separated by a 100 nm-wide nanotrench.
RESUMO
Ultralow dimensionality of 2D layers magnifies their sensitivity to adjacent charges enabling even postprocessing electric control of multifunctional structures. However, functionalizing 2D layers remains an important challenge for on-demand device-property exploitation. Here we report that an electrical and even fully optical way to control and write modifications to the magnetoresistive response of CVD-deposited graphene is achievable through the electrostatics of the photoferroelectric substrate. For electrical control, the ferroelectric polarization switch modifies graphene magnetoresistance by 67% due to a Fermi level shift with related modification in charge mobility. A similar function is also attained entirely by bandgap light due to the substrate photovoltaic effect. Moreover, an all-optical way to imprint and recover graphene magnetoresistance by light is reported as well as magnetic control of graphene transconductance. These findings extend photoferroelectric control in 2D structures to magnetic dimensions and advance wireless operation for sensors and field-effect transistors.
RESUMO
We synthesized a sublimable molecular spin crossover Fe(II) complex based on the Schiff base tridentate ligand qsal-NEt2 (5-diethylamino-2-((quinolin-8-ylimino)methyl)phenol). The compound undergoes a transition in temperature with thermally induced excited spin state-trapping (TIESST) for high-temperature sweep rates, which can be suppressed by reducing the sweep rate. The X-ray absorption spectroscopy (XAS) studies on the microcrystalline powder confirm the TIESST effect. The molecules are deposited under ultra-high vacuum on a graphene/SiO2 substrate as a submonolayer. Investigation of the submonolayer by XAS reveals the molecular integrity and shows a spin crossover for the whole temperature range from 350 to 4 K, with residual HS species at low temperature and no TIESST effect. DFT calculations suggest a distribution of energetically similar adsorption configurations on graphene, i.e., with smooth crossover behaviour and the absence of TIESST, consistent with very weak intermolecular interactions and the absence of large molecular islands within the submonolayer.
RESUMO
Epitaxial growth of electrodes and tunnel barriers on graphene is one of the main technological bottlenecks for graphene spintronics. In this paper, we demonstrate that MgO(111) epitaxial tunnel barriers, one of the prime candidates for spintronic application, can be grown by molecular beam epitaxy on epitaxial graphene on SiC(0001). Ferromagnetic metals (Fe, Co, Fe20Ni80) were epitaxially grown on top of the MgO barrier, thus leading to monocrystalline electrodes on graphene. Structural and magnetic characterizations were performed on these ferromagnetic metals after annealing and dewetting: they form clusters with a 100 nm typical lateral width, which are mostly magnetic monodomains in the case of Fe. This epitaxial stack opens the way to graphene spintronic devices taking benefits from a coherent tunnelling current through the epitaxial MgO/graphene stack.
RESUMO
As global data generation continues to rise, there is an increasing demand for revolutionary in-memory computing methodologies and efficient machine learning solutions. Despite recent progress in electrical and electro-optical simulations of machine learning devices, the all-optical nonthermal function remains challenging, with single wavelength operation still elusive. Here we report on an optical and monochromatic way of neuromorphic signal processing for brain-inspired functions, eliminating the need for electrical pulses. Multilevel synaptic potentiation-depression cycles are successfully achieved optically by leveraging photovoltaic charge generation and polarization within the photoferroelectric substrate interfaced with the graphene sensor. Furthermore, the demonstrated low-power prototype device is able to reproduce exact signal profile of brain tissues yet with more than 2 orders of magnitude faster response. The reported properties should trigger all-optical and low power artificial neuromorphic development based on photoferroelectric structures.
RESUMO
Interface-driven effects in ferroelectric van der Waals (vdW) heterostructures provide fresh opportunities in the search for alternative device architectures toward overcoming the von Neumann bottleneck. However, their implementation is still in its infancy, mostly by electrical control. It is of utmost interest to develop strategies for additional optical and multistate control in the quest for novel neuromorphic architectures. Here, we demonstrate the electrical and optical control of the ferroelectric polarization states of ferroelectric field effect transistors (FeFET). The FeFETs, fully made of ReS2/hBN/CuInP2S6 vdW materials, achieve an on/off ratio exceeding 107, a hysteresis memory window up to 7 V wide, and multiple remanent states with a lifetime exceeding 103 s. Moreover, the ferroelectric polarization of the CuInP2S6 (CIPS) layer can be controlled by photoexciting the vdW heterostructure. We perform wavelength-dependent studies, which allow for identifying two mechanisms at play in the optical control of the polarization: band-to-band photocarrier generation into the 2D semiconductor ReS2 and photovoltaic voltage into the 2D ferroelectric CIPS. Finally, heterosynaptic plasticity is demonstrated by operating our FeFET in three different synaptic modes: electrically stimulated, optically stimulated, and optically assisted synapse. Key synaptic functionalities are emulated including electrical long-term plasticity, optoelectrical plasticity, optical potentiation, and spike rate-dependent plasticity. The simulated artificial neural networks demonstrate an excellent accuracy level of 91% close to ideal-model synapses. These results provide a fresh background for future research on photoferroelectric vdW systems and put ferroelectric vdW heterostructures on the roadmap for the next neuromorphic computing architectures.
RESUMO
Emerging reconfigurable devices are fast gaining popularity in the search for next-generation computing hardware, while ferroelectric engineering of the doping state in semiconductor materials has the potential to offer alternatives to traditional von-Neumann architecture. In this work, we combine these concepts and demonstrate the suitability of reconfigurable ferroelectric field-effect transistors (Re-FeFETs) for designing nonvolatile reconfigurable logic-in-memory circuits with multifunctional capabilities. Modulation of the energy landscape within a homojunction of a 2D tungsten diselenide (WSe2) layer is achieved by independently controlling two split-gate electrodes made of a ferroelectric 2D copper indium thiophosphate (CuInP2S6) layer. Controlling the state encoded in the program gate enables switching between p, n, and ambipolar FeFET operating modes. The transistors exhibit on-off ratios exceeding 106 and hysteresis windows of up to 10 V width. The homojunction can change from Ohmic-like to diode behavior with a large rectification ratio of 104. When programmed in the diode mode, the large built-in p-n junction electric field enables efficient separation of photogenerated carriers, making the device attractive for energy-harvesting applications. The implementation of the Re-FeFET for reconfigurable logic functions shows how a circuit can be reconfigured to emulate either polymorphic ferroelectric NAND/AND logic-in-memory or electronic XNOR logic with a long retention time exceeding 104 s. We also illustrate how a circuit design made of just two Re-FeFETs exhibits high logic expressivity with reconfigurability at runtime to implement several key nonvolatile 2-input logic functions. Moreover, the Re-FeFET circuit demonstrates high compactness, with an up to 80% reduction in transistor count compared to standard CMOS design. The 2D van de Waals Re-FeFET devices therefore exhibit promising potential for both More-than-Moore and beyond-Moore future of electronics, in particular for an energy-efficient implementation of in-memory computing and machine learning hardware, due to their multifunctionality and design compactness.
RESUMO
Two-dimensional (2D) ferroelectric (FE) materials are promising compounds for next-generation nonvolatile memories due to their low energy consumption and high endurance. Among them, α-In2Se3 has drawn particular attention due to its in- and out-of-plane ferroelectricity, whose robustness has been demonstrated down to the monolayer limit. This is a relatively uncommon behavior since most bulk FE materials lose their ferroelectric character at the 2D limit due to the depolarization field. Using angle resolved photoemission spectroscopy (ARPES), we unveil another unusual 2D phenomenon appearing in 2H α-In2Se3 single crystals, the occurrence of a highly metallic two-dimensional electron gas (2DEG) at the surface of vacuum-cleaved crystals. This 2DEG exhibits two confined states, which correspond to an electron density of approximately 1013 electrons/cm2, also confirmed by thermoelectric measurements. Combination of ARPES and density functional theory (DFT) calculations reveals a direct band gap of energy equal to 1.3 ± 0.1 eV, with the bottom of the conduction band localized at the center of the Brillouin zone, just below the Fermi level. Such strong n-type doping further supports the quantum confinement of electrons and the formation of the 2DEG.
RESUMO
Nanocrystals' (NCs) band gap can be easily tuned over the infrared range, making them appealing for the design of cost-effective sensors. Though their growth has reached a high level of maturity, their doping remains a poorly controlled parameter, raising the need for post-synthesis tuning strategies. As a result, phototransistor device geometry offers an interesting alternative to photoconductors, allowing carrier density control. Phototransistors based on NCs that target integrated infrared sensing have to (i) be compatible with low-temperature operation, (ii) avoid liquid handling, and (iii) enable large carrier density tuning. These constraints drive the search for innovative gate technologies beyond traditional dielectric or conventional liquid and ion gel electrolytes. Here, we explore lithium-ion glass gating and apply it to channels made of HgTe narrow band gap NCs. We demonstrate that this all-solid gate strategy is compatible with large capacitance up to 2 µF·cm-2 and can be operated over a broad range of temperatures (130-300 K). Finally, we tackle an issue often faced by NC-based phototransistors:their low absorption; from a metallic grating structure, we combined two resonances and achieved high responsivity (10 A·W-1 or an external quantum efficiency of 500%) over a broadband spectral range.
RESUMO
A co-tunneling charge-transfer process dominates the electrical properties of a nanometer-sized "slice" in a nanoparticle network, which results in universal scaling of the conductance with temperature and bias voltage, as well as enhanced spintronics properties. By designing two large (10 µm) electrodes with short (60 nm) separation, access is obtained to transport dominated by charge transfer involving "nanoslices" made of three nanoparticles only. Magnetic iron oxide nanoparticle networks exhibit a magnetoresistance ratio that is not reachable by tunneling or hopping processes, thereby illustrating how such a size-matched planar device with dominant co-tunneling charge-transfer process is optimal for realizing multifunctional devices with enhanced change of conductance under external stimulus.
RESUMO
Epitaxial clusters of chromium and chromium-vanadium oxides are studied by tunnel magneto-resistivity measurements, x-ray absorption spectrometry and circular magnetic circular dichroism. They turn out to carry a small magnetic moment that follows a super-paramagnetic behavior. The chromium ion contribution to this magnetization is mainly due to an original magnetic Cr2O3-like phase, whereas usual Cr2O3is known to be anti-ferromagnetic in the bulk. For mixed clusters, vanadium ions also contribute to the total magnetization and they are coupled to the chromium ion spins. By measuring the dichroic signal at different temperatures, we get insight into the possible spin configurations of vanadium and chromium ions: we propose that the magnetic dipoles observed in the clusters assembly could be related to ionic spins that couple at a very short range, as for instance in short one-dimensional spins chains.
RESUMO
Molecular systems can exhibit multi-stimuli switching of their properties, with spin crossover materials having unique magnetic transition triggered by temperature and light, among others. Light-induced room temperature operation is however elusive, as optical changes between metastable spin states require cryogenic temperatures. Furthermore, electrical detection is hampered by the intrinsic low conductivity properties of these materials. We show here how a graphene underlayer reveals the light-induced heating that triggers a spin transition, paving the way for using these molecules for room temperature optoelectronic applications.
RESUMO
Narrow band gap nanocrystals offer an interesting platform for alternative design of low-cost infrared sensors. It has been demonstrated that transport in HgTe nanocrystal arrays occurs between strongly-coupled islands of nanocrystals in which charges are partly delocalized. This, combined with the scaling of the noise with the active volume of the film, make case for device size reduction. Here, with two steps of optical lithography we design a nanotrench which effective channel length corresponds to 5-10 nanocrystals, matching the carrier diffusion length. We demonstrate responsivity as high as 1 kA W-1, which is 105 times higher than for conventional µm-scale channel length. In this work the associated specific detectivity exceeds 1012 Jones for 2.5 µm peak detection under 1 V at 200 K and 1 kHz, while the time response is as short as 20 µs, making this performance the highest reported for HgTe NC-based extended short-wave infrared detection.
RESUMO
Nanocrystals are promising building blocks for the development of low-cost infrared optoelectronics. Gating a nanocrystal film in a phototransistor geometry is commonly proposed as a strategy to tune the signal-to-noise ratio by carefully controlling the carrier density within the semiconductor. However, the performance improvement has so far been quite marginal. With metallic electrodes, the gate dependence of the photocurrent follows the gate-induced change of the dark current. Graphene presents key advantages: (i) infrared transparency that allows back-side illumination, (ii) vertical electric field transparency, and (iii) carrier selectivity under gate bias. Here, we investigate a configuration of 2D/0D infrared photodetectors taking advantage of a high capacitance ionic glass gate, large-scale graphene electrodes, and a HgTe nanocrystals layer of high carrier mobility. The introduction of graphene electrodes combined with ionic glass enables one to reconfigure selectively the HgTe nanocrystals and the graphene electrodes between electron-doped (n) and hole-doped (p) states. We unveil that this functionality enables the design a 2D/0D p-n junction that expands throughout the device, with a built-in electric field that assists charge dissociation. We demonstrate that, in this specific configuration, the signal-to-noise ratio for infrared photodetection can be enhanced by 2 orders of magnitude, and that photovoltaic operation can be achieved. The detectivity now reaches 109 Jones, whereas the device only absorbs 8% of the incident light. Additionally, the time response of the device is fast (<10 µs), which strongly contrasts with the slow response commonly observed for 2D/0D mixed-dimensional heterostructures, where larger photoconduction gains come at the cost of slower response.
RESUMO
We report on the modulation of the electrical properties of graphene-based transistors that mirror the properties of a few nanometers thick layer made of dipolar molecules sandwiched in between the 2D material and the SiO2 dielectric substrate. The chemical composition of the films of quinonemonoimine zwitterion molecules adsorbed onto SiO2 has been explored by means of X-ray photoemission and mass spectroscopy. Graphene-based devices are then fabricated by transferring the 2D material onto the molecular film, followed by the deposition of top source-drain electrodes. The degree of supramolecular order in disordered films of dipolar molecules was found to be partially improved as a result of the electric field at low temperatures, as revealed by the emergence of hysteresis in the transfer curves of the transistors. The use of molecules from the same family, which are suitably designed to interact with the dielectric surface, results in the disappearance of the hysteresis. DFT calculations confirm that the dressing of the molecules by an external electric field exhibits multiple minimal energy landscapes that explain the thermally stabilized capacitive coupling observed. This study demonstrates that the design and exploitation of ad hoc molecules as an interlayer between a dielectric substrate and graphene represents a powerful tool for tuning the electrical properties of the 2D material. Conversely, graphene can be used as an indicator of the stability of molecular layers, by providing insight into the energetics of ordering of dipolar molecules under the effect of electrical gating.
RESUMO
Fabrication and spintronics properties of 2D-0D heterostructures are reported. Devices based on graphene ("Gr")-aluminium nanoclusters heterostructures show robust and reproducible single-electron transport features, in addition to spin-dependent functionality when using a top magnetic electrode. The magnetic orientation of this single ferromagnetic electrode enables the modulation of the environmental charge experienced by the aluminium nanoclusters. This anisotropic magneto-Coulomb effect, originating from spin-orbit coupling within the ferromagnetic electrode, provides tunable spin valve-like magnetoresistance signatures without the requirement of spin coherent charge tunneling. These results extend the capability of Gr to act both as electrode and as a platform for the growth of 2D-0D mixed-dimensional van der Waals heterostructures, providing magnetic functionalities in the Coulomb blockade regime on scalable spintronic devices. These heterostructures pave the way towards novel device architectures at the crossroads of 2D material physics and spin electronics.