RESUMO
The aim of the present paper is to demonstrate the importance of using complementary process analyzers (PAT tools) for the process monitoring, analysis, and understanding of freeze drying. A mannitol solution was used as a model system. Raman spectroscopic, near-infrared (NIR) spectroscopic, plasma emission spectroscopic, and wireless temperature measurements (TEMPRIS) were simultaneously performed in-line and real-time during each freeze-drying experiment. The combination of these four process analyzers to monitor a freeze-drying process is unique. The Raman and NIR data were analyzed using principal component analysis (PCA) and multivariate curve resolution (MCR), while the plasma emission spectroscopic and wireless temperature measurement data were analyzed using univariate data analysis. It was shown that the considered process analyzers do not only complement but also mutually confirm each other with respect to process step end points, physical phenomena occurring during freeze drying (process understanding), and product characterization (solid state). Furthermore and most important, the combined use of the process analyzers helped to identify flaws in previous studies in which these process analyzers were studied individually. Process analyzers might wrongly indicate that some process steps are fulfilled. Finally, combining the studied process analyzers also showed that more information per process analyzer can be obtained than previously described. A combination of Raman and plasma emission spectroscopy seems favorable for the monitoring of nearly all critical freeze-drying process aspects.
Assuntos
Liofilização/instrumentação , Manitol/química , Liofilização/métodos , Análise de Componente Principal , Espectroscopia de Luz Próxima ao Infravermelho , Análise Espectral Raman , TemperaturaRESUMO
Mini-matrices (multiple unit dosage form) with release-sustaining properties were developed by hot-melt extrusion (cylindrical die: 3mm) using metoprolol tartrate as model drug and ethylcellulose as sustained-release agent. Dibutyl sebacate was selected as plasticizer and its concentration was optimized to 50% (w/w) of the ethylcellulose concentration. Xanthan gum, a hydrophilic polymer, was added to the formulation to increase drug release. Changing the xanthan gum concentration modified the in vitro drug release: increasing xanthan gum concentrations (1%, 2.5%, 5%, 10% and 20%, w/w) yielded a faster drug release. Zero-order drug release was obtained at 5% (w/w) xanthan gum. Using kneading paddles, smooth extrudates were obtained when processed at 60 degrees C. At least one mixing zone was required to obtain smooth and homogeneous extrudates. The mixing efficacy and drug release were not affected by the number of mixing zones or their position along the extruder barrel. Raman analysis revealed that metoprolol tartrate was homogeneously distributed in the mini-matrices, independent of screw design and processing conditions. Simultaneously changing the powder feed rate (6-25-50 g/min) and screw speed (30-100-200 rpm) did not alter extrudate quality or dissolution properties.
Assuntos
Celulose/análogos & derivados , Preparações de Ação Retardada/química , Celulose/química , Química Farmacêutica/métodos , Portadores de Fármacos , Sistemas de Liberação de Medicamentos , Estabilidade de Medicamentos , Preparações Farmacêuticas/química , Plastificantes/química , Polímeros/química , Polissacarídeos Bacterianos/química , Pós , Solubilidade , Análise Espectral Raman , Tecnologia Farmacêutica/métodos , TemperaturaRESUMO
The aim of this study is to propose a strategy to implement a PAT system in the blending step of pharmaceutical production processes. It was examined whether Raman spectroscopy can be used as PAT tool for the in-line and real-time endpoint monitoring and understanding of a powder blending process. A screening design was used to identify and understand the significant effects of two process variables (blending speed and loading of the blender) and of a formulation variable (concentration of active pharmaceutical ingredient (API): diltiazem hydrochloride) upon the required blending time (response variable). Interactions between the variables were investigated as well. A Soft Independent Modelling of Class Analogy (SIMCA) model was developed to determine the homogeneity of the blends in-line and real-time using Raman spectroscopy in combination with a fiber optical immersion probe. One blending experiment was monitored using Raman and NIR spectroscopy simultaneously. This was done to verify whether two independent monitoring tools can confirm each other's endpoint conclusions. The analysis of the experimental design results showed that the measured endpoints were excessively rounded due to the large measurement intervals relative to the first blending times. This resulted in effects and critical effects which cannot be interpreted properly. To be able to study the effects properly, the ratio between the blending times and the measurement intervals should be sufficiently high. In this study, it anyway was demonstrated that Raman spectroscopy is a suitable PAT tool for the endpoint control of a powder blending process. Raman spectroscopy not only allowed in-line and real-time monitoring of the blend homogeneity, but also helped to understand the process better in combination with experimental design. Furthermore, the correctness of the Raman endpoint conclusions was demonstrated for one process by using a second independent endpoint monitoring tool (NIR spectroscopy). Hence, the use of two independent techniques for the control of one response variable not only means a mutual confirmation of both methods, but also provides a higher certainty in the determined endpoint.
Assuntos
Química Farmacêutica/métodos , Diltiazem/análise , Composição de Medicamentos/métodos , Análise Espectral Raman/métodos , Tecnologia Farmacêutica/métodos , Celulose/química , Portadores de Fármacos , Lactose/química , Pós , Dióxido de Silício/química , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
A second order polynomial calibration model was developed and statistically validated for the direct and non-destructive quantitative analysis - without sample preparation - of the active pharmaceutical ingredient (API) salicylic acid in a pharmaceutical ointment using FT-Raman spectroscopy. The calibration curve was modeled by plotting the peak intensity of the vector normalized spectral band between 757 and 784cm(-1) against the known salicylic acid concentrations in standards. At this band, no spectral interferences from the ointment vehiculum (white vaseline) are observed. For the validation of the polynomial model, its fit and its predictive properties were evaluated. The validated model was used for the quantification of 25 ointments, compounded by different retail pharmacists. The same standards and samples were used, both for development and validation of a regression model and for quantitative determination by HPLC - with sample preparation - as described for the related substances of salicylic acid in the Ph. Eur. IV. The quantification results obtained by the FT-Raman method corresponded with the HPLC results (p=0.22), provided that the particle size of salicylic acid in the standards is the same as in the analyzed samples. The non-destructive FT-Raman method is a reliable alternative for the destructive HPLC method, as it is faster and does not require sample pre-treatment procedures.
Assuntos
Ceratolíticos/análise , Ácido Salicílico/análise , Calibragem , Química Farmacêutica , Cromatografia Líquida de Alta Pressão , Análise de Fourier , Bases para Pomadas , Pomadas , Tamanho da Partícula , Vaselina , Análise Espectral RamanRESUMO
Freeze-drying is the preferred method for stabilizing live, attenuated virus vaccines. After decades of research on several aspects of the process like the stabilization and destabilization mechanisms of the live, attenuated viruses during freeze-drying, the optimal formulation components and process settings are still matter of research. The molecular complexity of live, attenuated viruses, the multiple destabilization pathways and the lack of analytical techniques allowing the measurement of physicochemical changes in the antigen's structure during and after freeze-drying mean that they form a particular lyophilization challenge. The purpose of this review is to overview the available information on the development of the freeze-drying process of live, attenuated virus vaccines, herewith focusing on the freezing and drying stresses the viruses can undergo during processing as well as on the mechanisms and strategies (formulation and process) that are used to stabilize them during freeze-drying.
Assuntos
Liofilização/métodos , Vacinas Atenuadas/química , Vacinas Virais/química , Membrana Celular/química , Crioprotetores/química , Concentração de Íons de Hidrogênio , Gelo , Concentração Osmolar , Tecnologia Farmacêutica , Proteínas Virais/químicaRESUMO
We have optimized a micellar electrokinetic capillary chromatographic method for the separation of six angiotensin-II-receptor antagonists (ARA-IIs): candesartan, eprosartan mesylate, irbesartan, losartan potassium, telmisartan, and valsartan. A face-centred central composite design was applied to study the effect of the pH, the molarity of the running buffer, and the concentration of the micelle-forming agent on the separation properties. A combination of the studied parameters permitted the separation of the six ARA-IIs, which was best carried out using a 55-mM sodium phosphate buffer solution (pH 6.5) containing 15 mM of sodium dodecyl sulfate. The same system can also be applied for the quantitative determination of these compounds, but only for the more stable ARA-IIs (candesartan, eprosartan mesylate, losartan potassium, and valsartan). Some system parameters (linearity, precision, and accuracy) were validated.
Assuntos
Angiotensina II/metabolismo , Antagonistas de Receptores de Angiotensina , Anti-Hipertensivos/análise , Cromatografia Capilar Eletrocinética Micelar/métodos , Anti-Hipertensivos/farmacologia , Soluções Tampão , Concentração de Íons de Hidrogênio , Receptores de Angiotensina/metabolismo , Padrões de Referência , Reprodutibilidade dos TestesRESUMO
A simple linear regression method was developed and statistically validated for the direct and non-destructive quantitative analysis--without sample preparation--of the active pharmaceutical ingredient (API) medroxyprogesterone acetate (MPA) in an aqueous pharmaceutical suspension (150 mg in 1.0 ml) using FT-Raman spectroscopy. The linear regression was modelled by plotting the highest peak intensity of the vector normalized spectral band between 1630 and 1590 cm-1 against different MPA standard suspension concentrations. At this band, no spectral interferences from additives in the suspension are observed. The validated model was used for the quantification of a commercial suspension (150 mg in 1.0 ml) of the commercialized preparations. The same standards and samples were used, respectively, for the development and validation of a simple linear regression model and for the quantitative determination by means of HPLC-with sample preparation-as described for the related substances of MPA in the Ph. Eur. IV. The quantification results obtained by the FT-Raman method corresponded with the claimed label concentration (150.01+/-0.96 mg/ml (n=6)). Applying the HPLC method, however, a systematic error was observed (157.77+/-0.94 mg/ml (n=6)). The direct FT-Raman method hence appears the most reliable for the quantification of the MPA component in suspension, compared to the HPLC method that requires sample preparation. The latter method provides a systematic error because the exact volume or density of a suspension sample is unknown. A precise isolation of fixed volumes from a suspension is rather unfeasible because of the continuous sagging of the suspended particles and their sticking to the used materials in the isolation process.
Assuntos
Acetato de Medroxiprogesterona/análise , Acetato de Medroxiprogesterona/normas , Análise Espectral Raman/métodos , Tecnologia Farmacêutica/métodos , Cromatografia Líquida de Alta Pressão , Modelos Químicos , Soluções Farmacêuticas/análise , Soluções Farmacêuticas/normas , Análise Espectral Raman/normasRESUMO
FT-Raman spectroscopy (in combination with a fibre optic probe) was evaluated as an in-line tool to monitor a blending process of diltiazem hydrochloride pellets and paraffinic wax beads. The mean square of differences (MSD) between two consecutive spectra was used to identify the time required to obtain a homogeneous mixture. A traditional end-sampling thief probe was used to collect samples, followed by HPLC analysis to verify the Raman data. Large variations were seen in the FT-Raman spectra logged during the initial minutes of the blending process using a binary mixture (ratio: 50/50, w/w) of diltiazem pellets and paraffinic wax beads (particle size: 800-1200 microm). The MSD-profiles showed that a homogeneous mixture was obtained after about 15 min blending. HPLC analysis confirmed these observations. The Raman data showed that the mixing kinetics depended on the particle size of the material and on the mixing speed. The results of this study proved that FT-Raman spectroscopy can be successfully implemented as an in-line monitoring tool for blending processes.
Assuntos
Análise de Fourier , Análise Espectral Raman/métodos , Tecnologia Farmacêutica/métodos , Tecnologia Farmacêutica/instrumentaçãoRESUMO
The aim of the present study was to examine the possibilities/advantages of using recently introduced in-line spectroscopic process analyzers (Raman, NIR and plasma emission spectroscopy), within well-designed experiments, for the optimization of a pharmaceutical formulation and its freeze-drying process. The formulation under investigation was a mannitol (crystalline bulking agent)-sucrose (lyo- and cryoprotector) excipient system. The effects of two formulation variables (mannitol/sucrose ratio and amount of NaCl) and three process variables (freezing rate, annealing temperature and secondary drying temperature) upon several critical process and product responses (onset and duration of ice crystallization, onset and duration of mannitol crystallization, duration of primary drying, residual moisture content and amount of mannitol hemi-hydrate in end product) were examined using a design of experiments (DOE) methodology. A 2-level fractional factorial design (2(5-1)=16 experiments+3 center points=19 experiments) was employed. All experiments were monitored in-line using Raman, NIR and plasma emission spectroscopy, which supply continuous process and product information during freeze-drying. Off-line X-ray powder diffraction analysis and Karl-Fisher titration were performed to determine the morphology and residual moisture content of the end product, respectively. In first instance, the results showed that - besides the previous described findings in De Beer et al., Anal. Chem. 81 (2009) 7639-7649 - Raman and NIR spectroscopy are able to monitor the product behavior throughout the complete annealing step during freeze-drying. The DOE approach allowed predicting the optimum combination of process and formulation parameters leading to the desired responses. Applying a mannitol/sucrose ratio of 4, without adding NaCl and processing the formulation without an annealing step, using a freezing rate of 0.9°C/min and a secondary drying temperature of 40°C resulted in efficient freeze-drying supplying end products with a residual moisture content below 2% and a mannitol hemi-hydrate content below 20%. Finally, using Monte Carlo simulations it became possible to determine how varying the factor settings around their optimum still leads to fulfilled response criteria, herewith having an idea about the probability to exceed the acceptable response limits. This multi-dimensional combination and interaction of input variables (factor ranges) leading to acceptable response criteria with an acceptable probability reflects the process design space.
Assuntos
Química Farmacêutica , Liofilização , Química Farmacêutica/instrumentação , Química Farmacêutica/métodos , Química Farmacêutica/normas , Análise Espectral RamanRESUMO
Over the last few decades, polysaccharides have gained increasing attention in the biomedical and drug delivery fields. Among them, glucomannan (GM), has become a particularly attractive polymer. In this paper, we review the physicochemical and biological properties which are decisive for the exploitation of GM as a biomaterial. These properties include the structural organization, molecular weight, solubility, viscosity, gelling properties and degradation behavior. Moreover, herein we analyze the possibilities of combining GM with other hydrophilic polymers, as well as the preparation of semisynthetic derivatives of GM, which may be of interest in the pharmaceutical context. Finally, we discuss the specific applications of GM in the drug delivery field.
Assuntos
Celulose/química , Temperatura Alta , Polietilenoglicóis/química , Área Sob a Curva , Técnicas In Vitro , Análise Espectral Raman , Difração de Raios XRESUMO
Different types of ethylcellulose-based mini-matrices were prepared by hot-melt extrusion and thoroughly characterized in vitro. Metoprolol tartrate was used as model drug, and various amounts and types of polyethylene glycol (PEG)/polyethylene oxide (PEO) were added as release rate modifiers. Based on the experimental results, appropriate mathematical theories were identified/developed, allowing for a better understanding of the underlying drug release mechanisms. For instance, it could be shown that at high initial PEG/PEO contents and/or intermediate initial PEG/PEO contents of low molecular weight, drug diffusion with time- and position-independent diffusivities is predominant. In contrast, at low initial PEG/PEO contents and intermediate initial PEG/PEO contents of high molecular weight, the time- and position-dependent dynamic changes in the matrix porosities significantly affect the conditions for drug and PEG/PEO diffusion. These dynamic changes must be taken into account in the mathematical model. Importantly, the proposed theories are mechanistic realistic and also allow for the quantitative prediction of the effects of the device design on the resulting drug release patterns. Interestingly, these quantitative predictions could be confirmed by independent experiments. Furthermore, Raman spectroscopy allowed for the determination of the resulting drug concentration-position profiles within the mini-matrices as a function of time and confirmed the theoretical predictions.
Assuntos
Celulose/análogos & derivados , Portadores de Fármacos , Metoprolol/química , Modelos Químicos , Celulose/química , Química Farmacêutica , Difusão , Composição de Medicamentos , Temperatura Alta , Cinética , Peso Molecular , Polietilenoglicóis/química , Porosidade , Reprodutibilidade dos Testes , Solubilidade , Análise Espectral RamanRESUMO
The aim of the present study was to examine the complementary properties of Raman and near infrared (NIR) spectroscopy as PAT tools for the fast, noninvasive, nondestructive and in-line process monitoring of a freeze drying process. Therefore, Raman and NIR probes were built in the freeze dryer chamber, allowing simultaneous process monitoring. A 5% (w/v) mannitol solution was used as model for freeze drying. Raman and NIR spectra were continuously collected during freeze drying (one Raman and NIR spectrum/min) and the spectra were analyzed using principal component analysis (PCA) and multivariate curve resolution (MCR). Raman spectroscopy was able to supply information about (i) the mannitol solid state throughout the entire process, (ii) the endpoint of freezing (endpoint of mannitol crystallization), and (iii) several physical and chemical phenomena occurring during the process (onset of ice nucleation, onset of mannitol crystallization). NIR spectroscopy proved to be a more sensitive tool to monitor the critical aspects during drying: (i) endpoint of ice sublimation and (ii) monitoring the release of hydrate water during storage. Furthermore, via NIR spectroscopy some Raman observations were confirmed: start of ice nucleation, end of mannitol crystallization and solid state characteristics of the end product. When Raman and NIR monitoring were performed on the same vial, the Raman signal was saturated during the freezing step caused by reflected NIR light reaching the Raman detector. Therefore, NIR and Raman measurements were done on a different vial. Also the importance of the position of the probes (Raman probe above the vial and NIR probe at the bottom of the sidewall of the vial) in order to obtain all required critical information is outlined. Combining Raman and NIR spectroscopy for the simultaneous monitoring of freeze drying allows monitoring almost all critical freeze drying process aspects. Both techniques do not only complement each other, they also provided mutual confirmation of specific conclusions.
Assuntos
Liofilização/métodos , Espectroscopia de Luz Próxima ao Infravermelho/métodos , Análise Espectral Raman/métodos , Liofilização/instrumentação , Manitol/química , Análise de Componente Principal , Espectroscopia de Luz Próxima ao Infravermelho/instrumentação , Análise Espectral Raman/instrumentaçãoRESUMO
An alternative fast and non-destructive validated Raman spectroscopic analytical procedure, requiring no sample preparation, was compared with the industrially applied HPLC reference method (Pfizer Manufacturing Belgium) for the quantitative determination of medroxyprogesterone acetate (MPA) in DepoProvera suspensions (150 mg mL(-1), Pfizer). The Raman calibration model was developed by plotting the peak intensity of the baseline-corrected and normalized spectral band (corrected by external standard measurements) between 1595 and 1620 cm(-1) against known MPA concentrations in standards. At this band, no spectral interferences from the suspension medium are observed. The most suitable model for the calibration data (straight line or higher order polynomial) was determined by evaluating the fit and predictive properties of the models. In a second step, the developed Raman spectroscopic analytical method was validated by calculating the accuracy profile on the basis of the analysis results of validation samples. Furthermore, based on the data of the accuracy profile, the measurement uncertainty was determined. Finally, as the aim of the alternative method is to replace the destructive, time-consuming HPLC method, requiring sample preparation, it needs to be demonstrated that the new Raman method performs at least as good as the HPLC method. Therefore, the performance (precision and bias) of both methods was compared. A second order polynomial calibration curve through the calibration data supplies the best predictive properties and gives an acceptable fit. From the accuracy profile, it was concluded that at the target concentration (150 mg mL(-1)), 95 out 100 future routine measurements will be included within the acceptance limits (5%). Comparison of the alternative method with the reference method at the target concentration indicates that the Raman method performs at least as good as the HPLC method for precision (repeatability and intermediate precision) and bias. The fast and non-destructive Raman method hence provides an alternative for the destructive and time-consuming HPLC procedure.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Acetato de Medroxiprogesterona/análise , Preparações Farmacêuticas/química , Análise Espectral Raman/métodos , Calibragem , Padrões de Referência , Reprodutibilidade dos TestesRESUMO
The aim of the present study was to propose a strategy for the implementation of a Process Analytical Technology system in freeze-drying processes. Mannitol solutions, some of them supplied with NaCl, were used as models to freeze-dry. Noninvasive and in-line Raman measurements were continuously performed during lyophilization of the solutions to monitor real time the mannitol solid state, the end points of the different process steps (freezing, primary drying, secondary drying), and physical phenomena occurring during the process. At-line near-infrared (NIR) and X-ray powder diffractometry (XRPD) measurements were done to confirm the Raman conclusions and to find out additional information. The collected spectra during the processes were analyzed using principal component analysis and multivariate curve resolution. A two-level full factorial design was used to study the significant influence of process (freezing rate) and formulation variables (concentration of mannitol, concentration of NaCl, volume of freeze-dried sample) upon freeze-drying. Raman spectroscopy was able to monitor (i) the mannitol solid state (amorphous, alpha, beta, delta, and hemihydrate), (ii) several process step end points (end of mannitol crystallization during freezing, primary drying), and (iii) physical phenomena occurring during freeze-drying (onset of ice nucleation, onset of mannitol crystallization during the freezing step, onset of ice sublimation). NIR proved to be a more sensitive tool to monitor sublimation than Raman spectroscopy, while XRPD helped to unravel the mannitol hemihydrate in the samples. The experimental design results showed that several process and formulation variables significantly influence different aspects of lyophilization and that both are interrelated. Raman spectroscopy (in-line) and NIR spectroscopy and XRPD (at-line) not only allowed the real-time monitoring of mannitol freeze-drying processes but also helped (in combination with experimental design) us to understand the process.
Assuntos
Manitol/análise , Análise Espectral Raman/métodos , Liofilização/métodos , Difração de Pó/métodos , Sensibilidade e Especificidade , Cloreto de Sódio/química , Soluções/análise , Espectroscopia de Luz Próxima ao Infravermelho/métodosRESUMO
The aim of this study was to propose a Process Analytical Technology (PAT) strategy for the quantitative in-line monitoring of an aqueous pharmaceutical suspension using Raman spectroscopy. A screening design was used to study the significance of process variables (mixing speed and height of the stirrer in the reactor) and of formulation variables (concentration of the active pharmaceutical ingredient (API) ibuprofen and the viscosity enhancer (xanthan gum)) on the time required to homogenize an aqueous pharmaceutical model suspension as response variable. Ibuprofen concentration (10% and 15% (w/v)) and the height of stirrer (position 1 and 2) were discrete variables, whereas the viscosity enhancer (concentration range: 1-2 g L-1) and the mixing speed (700-1000 rpm) were continuous variables. Next, a multilevel full factorial design was applied to study the effect of the remaining significant variables upon the homogenization process and to establish the optimum conditions for the process. Interactions between these variables were investigated as well. During each design experiment, the conformity index (CI) method was used to monitor homogeneity of the suspension mixing system in real-time using Raman spectroscopy in combination with a fibre optical immersion probe. Finally, a principal component regression (PCR) model was developed and evaluated to perform quantitative real-time and in-line measurements of the API during the mixing process. The experimental design results showed that the suspension homogenization process is an irregular process, for which it is impossible to model the studied variables upon the measured response variable. However, applying the PCR model it is possible to predict in-line and real-time the concentration of the API in a suspension during a mixing process. In this study, it is shown that Raman spectroscopy is a suitable PAT tool for the control of the homogenization process of an aqueous suspension. Raman spectroscopy not only allowed real-time monitoring of the homogeneity of the suspension, but also helped (in combination with experimental design) to understand the process. Further, the technique allowed real-time and in-line quantification of the API during the mixing process.