RESUMO
The study of Eocene primates is crucial for understanding the evolutionary steps undergone by the earliest members of our lineage and the relationships between extinct and extant taxa. Recently, the description of new material from Spain has improved knowledge of European Paleogene primates considerably, particularly regarding microchoerines. Here we describe the remains of Microchoerus from Sossís (late Eocene, Northern Spain), consisting of more than 120 specimens and representing the richest sample of Microchoerus from Spain. This primate was first documented in Sossís during the 1960s, on the basis of scarce specimens that were ascribed to Microchoerus erinaceus. However, the studied material clearly differs from M. erinaceus at its type locality, Hordle Cliff, and shows some characters that allow the erection of a new species, Microchoerus hookeri. This new species is characterized by its medium size, moderate enamel wrinkling, generally absent mesoconid and small hypoconulid in the M1 and M2, single paracone in the upper molars and premolars and, particularly, by the lack of mesostyle in most M1 and M2, a trait not observed in any other species of Microchoerus. Some specimens from Eclépens B (late Eocene, Switzerland), determined previously to be Microcherus aff. erinaceus, are also ascribed to M. hookeri. M. hookeri represents the first step of a lineage that differentiated from Necrolemur antiquus and, later, gave rise to several unnamed forms of Microchoerus, such as those from Euzet and Perrière, finally leading to M. erinaceus. This discovery sheds new light on the complex evolutionary scheme of Microchoerus, indicating that it is most probably a paraphyletic group. A detailed revision of the age of the localities containing remains of Microchoerus and the description of the still unpublished material from some European localities, are necessary to clarify the phylogenetic relationships among the members of this microchoerine group.
Assuntos
Dente Pré-Molar/anatomia & histologia , Fósseis/anatomia & histologia , Mandíbula/anatomia & histologia , Dente Molar/anatomia & histologia , Paleodontologia/métodos , Primatas/classificação , Animais , Evolução Biológica , Filogenia , EspanhaRESUMO
The relationship between the mechanical loading undergone by a bone and its form has been widely assumed as a premise in studies aiming to reconstruct behavioral patterns from skeletal remains. Nevertheless, this relationship is complex due to the existence of many factors affecting bone structure and form, and further research combining structural and shape characteristics is needed. Using two-block PLS, which is a test to analyze the covariance between two sets of variables, we aim to investigate the relationship between upper-limb entheseal changes, cross-sectional properties, and contour shape of the humeral diaphysis. Our results show that individuals with strongly marked entheseal changes have increased diaphyseal rigidities. Bending rigidities are mainly related to entheseal changes of muscles that cross the shoulder. Moreover, the entheseal changes of muscles that participate in the rotation of the arm are related to mediolaterally flatter and ventrodorsally broader humeral shapes in the mid-proximal diaphysis. In turn, this diaphyseal shape is related to diaphyseal rigidity, especially to bending loadings. The shape of the diaphysis of the rest of the humerus does not covary either with rigidity or with entheseal changes. The results indicate that large muscular scars, such as those found in the mid-proximal diaphyses, seem to be related to diaphyseal shape, whereas this relationship is not seen for areas with less direct influences of powerful muscles.
Assuntos
Úmero/anatomia & histologia , Úmero/fisiologia , Adulto , Antropologia Física , Fenômenos Biomecânicos/fisiologia , Feminino , Humanos , Análise dos Mínimos Quadrados , Masculino , Pessoa de Meia-IdadeRESUMO
The great ape and human clade (Primates: Hominidae) currently includes orangutans, gorillas, chimpanzees, bonobos, and humans. When, where, and from which taxon hominids evolved are among the most exciting questions yet to be resolved. Within the Afropithecidae, the Kenyapithecinae (Kenyapithecini + Equatorini) have been proposed as the sister taxon of hominids, but thus far the fragmentary and scarce Middle Miocene fossil record has hampered testing this hypothesis. Here we describe a male partial face with mandible of a previously undescribed fossil hominid, Anoiapithecus brevirostris gen. et sp. nov., from the Middle Miocene (11.9 Ma) of Spain, which enables testing this hypothesis. Morphological and geometric morphometrics analyses of this material show a unique facial pattern for hominoids. This taxon combines autapomorphic features--such as a strongly reduced facial prognathism--with kenyapithecine (more specifically, kenyapithecin) and hominid synapomorphies. This combination supports a sister-group relationship between kenyapithecins (Griphopithecus + Kenyapithecus) and hominids. The presence of both groups in Eurasia during the Middle Miocene and the retention in kenyapithecins of a primitive hominoid postcranial body plan support a Eurasian origin of the Hominidae. Alternatively, the two extant hominid clades (Homininae and Ponginae) might have independently evolved in Africa and Eurasia from an ancestral, Middle Miocene stock, so that the supposed crown-hominid synapomorphies might be homoplastic.
Assuntos
Evolução Biológica , Hominidae/genética , Animais , Fósseis , Humanos , PaleontologiaRESUMO
BACKGROUND: In this paper, we propose a new method, named the intervals' method, to analyse data from finite element models in a comparative multivariate framework. As a case study, several armadillo mandibles are analysed, showing that the proposed method is useful to distinguish and characterise biomechanical differences related to diet/ecomorphology. METHODS: The intervals' method consists of generating a set of variables, each one defined by an interval of stress values. Each variable is expressed as a percentage of the area of the mandible occupied by those stress values. Afterwards these newly generated variables can be analysed using multivariate methods. RESULTS: Applying this novel method to the biological case study of whether armadillo mandibles differ according to dietary groups, we show that the intervals' method is a powerful tool to characterize biomechanical performance and how this relates to different diets. This allows us to positively discriminate between specialist and generalist species. DISCUSSION: We show that the proposed approach is a useful methodology not affected by the characteristics of the finite element mesh. Additionally, the positive discriminating results obtained when analysing a difficult case study suggest that the proposed method could be a very useful tool for comparative studies in finite element analysis using multivariate statistical approaches.
RESUMO
Macroevolutionary, palaeoecological and biomechanical analyses in deep time offer the possibility to decipher the structural constraints, ecomorphological patterns and evolutionary history of extinct groups. Here, 3D comparative biomechanical analyses of the extinct giant early amphibian group of stereospondyls together with living lissamphibians and crocodiles, shows that: i) stereospondyls had peculiar palaeoecological niches with proper bites and stress patterns very different than those of giant salamanders and crocodiles; ii) their extinction may be correlated with the appearance of neosuchians, which display morphofunctional innovations. Stereospondyls weathered the end-Permian mass extinction, re-radiated, acquired gigantic sizes and dominated (semi) aquatic ecosystems during the Triassic. Because these ecosystems are today occupied by crocodilians, and stereospondyls are extinct amphibians, their palaeobiology is a matter of an intensive debate: stereospondyls were a priori compared with putative living analogous such as giant salamanders and/or crocodilians and our new results try to close this debate.
Assuntos
Anfíbios/anatomia & histologia , Evolução Biológica , Ecossistema , Extinção Biológica , Filogenia , Jacarés e Crocodilos/anatomia & histologia , Jacarés e Crocodilos/genética , Anfíbios/genética , Animais , Fenômenos Biomecânicos , Crânio/anatomia & histologia , Urodelos/anatomia & histologia , Urodelos/genéticaRESUMO
For the first time in vertebrate palaeontology, the potential of joining Finite Element Analysis (FEA) and Parametrical Analysis (PA) is used to shed new light on two different cranial parameters from the orbits to evaluate their biomechanical role and evolutionary patterns. The early tetrapod group of Stereospondyls, one of the largest groups of Temnospondyls is used as a case study because its orbits position and size vary hugely within the members of this group. An adult skull of Edingerella madagascariensis was analysed using two different cases of boundary and loading conditions in order to quantify stress and deformation response under a bilateral bite and during skull raising. Firstly, the variation of the original geometry of its orbits was introduced in the models producing new FEA results, allowing the exploration of the ecomorphology, feeding strategy and evolutionary patterns of these top predators. Secondly, the quantitative results were analysed in order to check if the orbit size and position were correlated with different stress patterns. These results revealed that in most of the cases the stress distribution is not affected by changes in the size and position of the orbit. This finding supports the high mechanical plasticity of this group during the Triassic period. The absence of mechanical constraints regarding the orbit probably promoted the ecomorphological diversity acknowledged for this group, as well as its ecological niche differentiation in the terrestrial Triassic ecosystems in clades as lydekkerinids, trematosaurs, capitosaurs or metoposaurs.
Assuntos
Anfíbios/fisiologia , Evolução Biológica , Órbita/fisiologia , Anfíbios/anatomia & histologia , Animais , Fenômenos Biomecânicos , Força de Mordida , Gráficos por Computador , Análise de Elementos Finitos , Fósseis , Imageamento Tridimensional , Mandíbula/fisiologia , Análise Multivariada , Análise de Componente Principal , Crânio/fisiologia , Estresse Mecânico , VertebradosRESUMO
Finite element analyses (FEA) were applied to assess the lower jaw biomechanics of cingulate xenarthrans: 14 species of armadillos as well as one Pleistocene pampathere (11 extant taxa and the extinct forms Vassallia, Eutatus and Macroeuphractus). The principal goal of this work is to comparatively assess the biomechanical capabilities of the mandible based on FEA and to relate the obtained stress patterns with diet preferences and variability, in extant and extinct species through an ecomorphology approach. The results of FEA showed that omnivorous species have stronger mandibles than insectivorous species. Moreover, this latter group of species showed high variability, including some similar biomechanical features of the insectivorous Tolypeutes matacus and Chlamyphorus truncatus to those of omnivorous species, in agreement with reported diets that include items other than insects. It remains unclear the reasons behind the stronger than expected lower jaw of Dasypus kappleri. On the other hand, the very strong mandible of the fossil taxon Vassallia maxima agrees well with the proposed herbivorous diet. Moreover, Eutatus seguini yielded a stress pattern similar to Vassalia in the posterior part of the lower jaw, but resembling that of the stoutly built Macroeuphractus outesi in the anterior part. The results highlight the need for more detailed studies on the natural history of extant armadillos. FEA proved a powerful tool for biomechanical studies in a comparative framework.
Assuntos
Tatus/anatomia & histologia , Comportamento Alimentar , Fósseis/anatomia & histologia , Mandíbula/fisiologia , Xenarthra/anatomia & histologia , Animais , Fenômenos Biomecânicos , Extinção Biológica , Análise de Elementos Finitos , Mandíbula/anatomia & histologia , Estresse Mecânico , Xenarthra/classificaçãoRESUMO
The Magnorder Xenarthra includes strange extinct groups, like glyptodonts, similar to large armadillos, and ground sloths, terrestrial relatives of the extant tree sloths. They have created considerable paleobiological interest in the last decades; however, the ecology of most of these species is still controversial or unknown. The body mass estimation of extinct species has great importance for paleobiological reconstructions. The commonest way to estimate body mass from fossils is through linear regression. However, if the studied species does not have similar extant relatives, the allometric pattern described by the regression could differ from those shown by the extinct group. That is the case for glyptodonts and ground sloths. Thus, stepwise multiple regression were developed including extant xenarthrans (their taxonomic relatives) and ungulates (their size and ecological relatives). Cases were weighted to maximize the taxonomic evenness. Twenty-eight equations were obtained. The distribution of the percent of prediction error (%PE) was analyzed between taxonomic groups (Perissodactyla, Artiodactyla, and Xenarthra) and size groups (0-20 kg, 20-300 kg, and more than 300 kg). To assess the predictive power of the functions, equations were applied to species not included in the regression development [test set cross validation, (TSCV)]. Only five equations had a homogeneous %PE between the aforementioned groups. These were applied to five extinct species. A mean body mass of 80 kg was estimated for Propalaehoplophorus australis (Cingulata: Glyptodontidae), 594 kg for Scelidotherium leptocephalum (Phyllophaga: Mylodontidae), and 3,550.7 kg for Lestodon armatus (Phyllophaga: Mylodontidae). The high scatter of the body mass estimations obtained for Catonyx tarijensis (Phyllophaga: Mylodontidae) and Thalassocnus natans (Phyllophaga: Megatheriidae), probably due to different specializations, prevented us from predicting its body mass. Surprisingly, although obtained from ungulates and xenarthrans, these five selected equations were also able to predict the body mass of species from groups as different as rodents, carnivores, hyracoideans, or tubulidentates. This result suggests the presence of a complex common allometric pattern for all quadrupedal placentals.