RESUMO
The influence of poroelasticity on the contact mechanics of thin polyacrylamide films was investigated with a surface forces apparatus (SFA). A model based on a thin film approximation described compression forces for hydrated gels; polymer scaling theory explained the effects of gel dehydration. The results demonstrate that fluid flow dictates the apparent stiffness of highly confined poroelastic films.
RESUMO
Marine mussels secrete proteins rich in residues containing catechols and cationic amines that displace hydration layers and adhere to charged surfaces under water via a cooperative binding effect known as catechol-cation synergy. Mussel-inspired adhesives containing paired catechol and cationic functionalities are a promising class of materials for biomedical applications, but few studies address the molecular adhesion mechanism(s) of these materials. To determine whether intramolecular adjacency of these functionalities is necessary for robust adhesion, a suite of siderophore analog surface primers was synthesized with systematic variations in intramolecular spacing between catechol and cationic functionalities. Adhesion measurements conducted with a surface forces apparatus (SFA) allow adhesive failure to be distinguished from cohesive failure and show that the failure mode depends critically on the siderophore analog adsorption density. The adhesion of these molecules to muscovite mica in an aqueous electrolyte solution demonstrates that direct intramolecular adjacency of catechol and cationic functionalities is not necessary for synergistic binding. However, we show that increasing the catechol-cation spacing by incorporating nonbinding domains results in decreased adhesion, which we attribute to a decrease in the density of catechol functionalities. A mechanism for catechol-cation synergy is proposed based on electrostatically driven adsorption and subsequent binding of catechol functionalities. This work should guide the design of new adhesives for binding to charged surfaces in saline environments.
RESUMO
Using a surface forces apparatus (SFA), we quantitatively study the influence of surface damage on the contact mechanics of self-mated glassy polystyrene (PS) films. We use the SFA to measure the contact radius, surface profile, and normal force between the films, including the adhesion force. The molecular weight (MW) of the polymer influences the repeatability of the adhesion measurements and the effective surface energy calculated using the Johnson-Kendall-Roberts (JKR) theory. For low-MW PS (MW = 2.33 kDa), the effective surface energy increases over repeated adhesion cycles as the films become progressively damaged. For high-MW PS (MW = 280 kDa), the effective surface energy is constant over repeated adhesion cycles, but hysteresis is still present, manifested in a smaller contact radius during compression of the surfaces than during separation. Our results demonstrate that while the JKR theory is appropriate for describing the contact mechanics of glassy polymer thin films on layered elastic substrates, the contact mechanics of low-MW polymer films can be complicated by surface damage to the films.
RESUMO
Dissolution of mineral surfaces at asymmetric solid-liquid-solid interfaces in aqueous solutions occurs in technologically relevant processes, such as chemical/mechanical polishing (CMP) for semiconductor fabrication, formation and corrosion of structural materials, and crystallization of materials relevant to heterogeneous catalysis or drug delivery. In some such processes, materials at confined interfaces exhibit dissolution rates that are orders of magnitude larger than dissolution rates of isolated surfaces. Here, the dissolution of silica and alumina in close proximity to a charged gold surface or mica in alkaline solutions of pH 10-11 is shown to depend on the difference in electrostatic potentials of the surfaces, as determined from measurements conducted using a custom-built electrochemical pressure cell and a surface forces apparatus (SFA). The enhanced dissolution is proposed to result from overlap of the electrostatic double layers between the dissimilar charged surfaces at small intersurface separation distances (<1 Debye length). A semiquantitative model shows that overlap of the electric double layers can change the magnitude and direction of the electric field at the surface with the less negative potential, which results in an increase in the rate of dissolution of that surface. When the surface electrochemical properties were changed, the dissolution rates of silica and alumina were increased by up to 2 orders of magnitude over the dissolution rates of isolated compositionally similar surfaces under otherwise identical conditions. The results provide new insights on dissolution processes that occur at solid-liquid-solid interfaces and yield design criteria for controlling dissolution through electrochemical modification, with relevance to diverse technologies.
RESUMO
Advances in the research of intermolecular and surface interactions result from the development of new and improved measurement techniques and combinations of existing techniques. Here, we present a new miniature version of the surface forces apparatus-the µSFA-that has been designed for ease of use and multimodal capabilities with the retention of the capabilities of other SFA models including accurate measurements of the surface separation distance and physical characterization of dynamic and static physical forces (i.e., normal, shear, and friction) and interactions (e.g., van der Waals, electrostatic, hydrophobic, steric, and biospecific). The small physical size of the µSFA, compared to previous SFA models, makes it portable and suitable for integration into commercially available optical and fluorescence light microscopes, as demonstrated here. The large optical path entry and exit ports make it ideal for concurrent force measurements and spectroscopy studies. Examples of the use of the µSFA in combination with surface plasmon resonance (SPR) and Raman spectroscopy measurements are presented. Because of the short working distance constraints associated with Raman spectroscopy, an interferometric technique was developed and applied to calculate the intersurface separation distance based on Newton's rings. The introduction of the µSFA will mark a transition in SFA usage from primarily physical characterization to concurrent physical characterization with in situ chemical and biological characterization to study interfacial phenomena, including (but not limited to) molecular adsorption, fluid flow dynamics, the determination of surface species and morphology, and (bio)molecular binding kinetics.
RESUMO
The need for improved wet adhesives has driven research on mussel-inspired materials incorporating dihydroxyphenylalanine (DOPA) and related analogs of the parent catechol, but their susceptibility to oxidation limits practical application of these functionalities. Here, we investigate the molecular-level adhesion of the catechol analogs dihydroxybenzamide (DHB) and hydroxypyridinone (HOPO) as a function of pH. We find that the molecular structure of the catechol analogs influences their susceptibility to oxidation in alkaline conditions, with HOPO emerging as a particularly promising candidate for pH-tolerant adhesives for diverse environmental conditions.
RESUMO
Mucus is a dynamic biological hydrogel, composed primarily of the glycoprotein mucin, exhibits unique biophysical properties and forms a barrier protecting cells against a broad-spectrum of viruses. Here, this work develops a polyglycerol sulfate-based dendronized mucin-inspired copolymer (MICP-1) with ≈10% repeating units of activated disulfide as cross-linking sites. Cryo-electron microscopy (Cryo-EM) analysis of MICP-1 reveals an elongated single-chain fiber morphology. MICP-1 shows potential inhibitory activity against many viruses such as herpes simplex virus 1 (HSV-1) and SARS-CoV-2 (including variants such as Delta and Omicron). MICP-1 produces hydrogels with viscoelastic properties similar to healthy human sputum and with tuneable microstructures using linear and branched polyethylene glycol-thiol (PEG-thiol) as cross-linkers. Single particle tracking microrheology, electron paramagnetic resonance (EPR) and cryo-scanning electron microscopy (Cryo-SEM) are used to characterize the network structures. The synthesized hydrogels exhibit self-healing properties, along with viscoelastic properties that are tuneable through reduction. A transwell assay is used to investigate the hydrogel's protective properties against viral infection against HSV-1. Live-cell microscopy confirms that these hydrogels can protect underlying cells from infection by trapping the virus, due to both network morphology and anionic multivalent effects. Overall, this novel mucin-inspired copolymer generates mucus-mimetic hydrogels on a multi-gram scale. These hydrogels can be used as models for disulfide-rich airway mucus research, and as biomaterials.
Assuntos
Herpesvirus Humano 1 , Hidrogéis , Muco , SARS-CoV-2 , Hidrogéis/química , Hidrogéis/farmacologia , Herpesvirus Humano 1/efeitos dos fármacos , Humanos , Muco/metabolismo , SARS-CoV-2/efeitos dos fármacos , Mucinas/química , Mucinas/metabolismo , Antivirais/farmacologia , Antivirais/química , Polímeros/química , Polímeros/farmacologia , Animais , Dissulfetos/química , Polietilenoglicóis/química , Microscopia Crioeletrônica , COVID-19/virologia , GlicerolRESUMO
Translating fundamental studies of marine mussel adhesion into practical mussel-inspired wet adhesives remains an important technological challenge. To adhere, mussels secrete adhesive proteins rich in the catecholic amino acid 3,4-dihydroxyphenylalanine (Dopa) and positively charged lysine. Consequently, numerous synthetic adhesives incorporating catecholic and cationic functionalities have been designed. However, despite widespread research, uncertainties remain about the optimal design of synthetic mussel-inspired adhesives. Here, we present a study of the adhesion of mussel-inspired pressure-sensitive adhesives. We explore the effects of catechol content, molecular architecture, and solvent quality on pressure-sensitive adhesive (PSA) adhesion and cohesion measured in a surface forces apparatus. Our findings demonstrate that the influence of catechol content depends on the choice of solvent and that adhesive performance is dictated by film composition rather than molecular architecture. Our results also highlight the importance of electrostatic and hydrophobic interactions for adhesion and cohesion in aqueous environments. Together, our findings contribute to an improved understanding of the interplay between materials chemistry, environmental conditions, and adhesive performance to facilitate the design of bioinspired wet adhesives.
Assuntos
Resinas Acrílicas/química , Adesivos/química , Catecóis/química , Resinas Acrílicas/síntese química , Adesividade , Adesivos/síntese química , Catecóis/síntese química , Etanol/química , Pressão , Solventes/química , Água/químicaRESUMO
Improving adhesives for wet surfaces is an ongoing challenge. While the adhesive proteins of marine mussels have inspired many synthetic wet adhesives, the mechanisms of mussel adhesion are still not fully understood. Using surface forces apparatus (SFA) measurements and replica-exchange and umbrella-sampling molecular dynamics simulations, we probed the relationships between the sequence, structure, and adhesion of mussel-inspired peptides. Experimental and computational results reveal that peptides derived from mussel foot protein 3 slow (mfp-3s) containing 3,4-dihydroxyphenylalanine (Dopa), a post-translationally modified variant of tyrosine commonly found in mussel foot proteins, form adhesive monolayers on mica. In contrast, peptides with tyrosine adsorb as weakly adhesive clusters. We further considered simulations of mfp-3s derivatives on a range of hydrophobic and hydrophilic organic and inorganic surfaces (including silica, self-assembled monolayers, and a lipid bilayer) and demonstrated that the chemical character of the target surface and proximity of cationic and hydrophobic residues to Dopa affect peptide adsorption and adhesion. Collectively, our results suggest that conversion of tyrosine to Dopa in hydrophobic, sparsely charged peptides influences peptide self-association and ultimately dictates their adhesive performance.
Assuntos
Bivalves , Di-Hidroxifenilalanina , Animais , Peptídeos , Proteínas , Propriedades de SuperfícieRESUMO
Correction for 'Aqueous surface gels as low friction interfaces to mitigate implant-associated inflammation' by Allison L. Chau et al., J. Mater. Chem. B, 2020, 8, 6782-6791, DOI: .
RESUMO
Aqueous surface gels are fragile yet resilient biopolymer-based networks capable of sustaining extremely low friction coefficients despite tribologically-challenging environments. These superficial networks are ubiquitous in natural sliding interfaces and protect mechanosensitive cells from excessive contact pressures and frictional shear stresses from cell-fluid, cell-cell, or cell-solid interactions. Understanding these complex lubrication mechanisms may aid in the development of materials-based strategies for increasing biocompatibility in medical devices and implants. Equally as important is characterizing the interplay between soft and passive yet mobile implant materials and cellular reactions in response to direct contact and frictional shear stresses. Physically interrogating living biological systems without rupturing them in the process is nontrivial. To this end, custom biotribometers have been designed to precisely modulate contact pressures against living human telomerase-immortalized corneal epithelial (hTCEpi) cell layers using soft polyacrylamide membrane probes. Reverse-transcription quantitative polymerase chain-reaction (RT-qPCR) indicated that increased duration and, to a much greater extent, the magnitude of frictional shear stress lead to increased production of pro-inflammatory (IL-1ß, IL-6, MMP9) and pro-apoptotic (DDIT3, FAS) genes, which in clinical studies are linked to pathological pain. The hierarchical structure often found in biological systems has also been investigated through the fabrication of high-water content (polyacrylamide) hydrogels through free-radical polymerization inhibition. Nanoindentation experiments and friction coefficient measurements indicate that these "gradient surface gels" reduce contact pressures and frictional shear stresses at the surface of the material while still maintaining stiffness within the bulk. Reducing frictional shear stresses through informed materials and surface design may concomitantly increase lubricity and quiet the immune response, and thus provide bio-inspired routes to improve patient outcomes and quality of life.
Assuntos
Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Fricção , Inflamação/prevenção & controle , Próteses e Implantes/efeitos adversos , Água/química , Apoptose/efeitos dos fármacos , Células Epiteliais/citologia , Células Epiteliais/efeitos dos fármacos , Géis , Humanos , Inflamação/etiologia , Inflamação/patologia , Estresse Mecânico , Propriedades de SuperfícieRESUMO
Multiplexed genome engineering approaches can be used to generate targeted genetic diversity in cell populations on laboratory timescales, but methods to track mutations and link them to phenotypes have been lacking. We present an approach for tracking combinatorial engineered libraries (TRACE) through the simultaneous mapping of millions of combinatorially engineered genomes at single-cell resolution. Distal genomic sites are assembled into individual DNA constructs that are compatible with next-generation sequencing strategies. We used TRACE to map growth selection dynamics for Escherichia coli combinatorial libraries created by recursive multiplex recombineering at a depth 10(4)-fold greater than before. TRACE was used to identify genotype-to-phenotype correlations and to map the evolutionary trajectory of two individual combinatorial mutants in E. coli. Combinatorial mutations in the human ES2 ovarian carcinoma cell line were also assessed with TRACE. TRACE completes the combinatorial engineering cycle and enables more sophisticated approaches to genome engineering in both bacteria and eukaryotic cells than are currently possible.