Cortical and Trabecular Bone Stress Assessment during Periodontal Breakdown-A Comparative Finite Element Analysis of Multiple Failure Criteria.

Background and Objectives: This numerical analysis investigated the biomechanical behavior of the mandibular bone as a structure subjected to 0.5 N of orthodontic force during periodontal breakdown. Additionally, the suitability of the five most used failure criteria (Von Mises (VM), Tresca (T), maximum principal (S1), minimum principal (S3), and hydrostatic pressure (HP)) for the study of bone was assessed, and a single criterion was identified for the study of teeth and the surrounding periodontium (by performing correlations with other FEA studies). Materials and Methods: The finite element analysis (FEA) employed 405 simulations over eighty-one mandibular models with variable levels of bone loss (0-8 mm) and five orthodontic movements (intrusion, extrusion, tipping, rotation, and translation). For the numerical analysis of bone, the ductile failure criteria are suitable (T and VM are adequate for the study of bone), with Tresca being more suited. S1, S3, and HP criteria, due to their distinctive design dedicated to brittle materials and liquids/gas, only occasionally correctly described the bone stress distribution. Results: Only T and VM displayed a coherent and correlated gradual stress increase pattern for all five movements and levels of the periodontal breakdown. The quantitative values provided by T and VM were the highest (for each movement and level of bone loss) among all five criteria. The MHP (maximum physiological hydrostatic pressure) was exceeded in all simulations since the mandibular bone is anatomically less vascularized, and the ischemic risks are reduced. Only T and VM displayed a correlated (both qualitative and quantitative) stress increase for all five movements. Both T and VM displayed rotation and translation, closely followed by tipping, as stressful movements, while intrusion and extrusion were less stressful for the mandibular bone. Conclusions: Based on correlations with earlier numerical studies on the same models and boundary conditions, T seems better suited as a single unitary failure criterion for the study of teeth and the surrounding periodontium.

Effects of Increasing the Orthodontic Forces over Cortical and Trabecular Bone during Periodontal Breakdown-A Finite Elements Analysis.

Background and Objectives: Herein we used numerical analysis to study different biomechanical behaviors of mandibular bone subjected to 0.6 N, 1.2 N, and 2.4 N orthodontic loads during 0-8 mm periodontal breakdown using the Tresca failure criterion. Additionally, correlations with earlier FEA reports found potential ischemic and resorptive risks. Materials and Methods: Eighty-one models (nine patients) and 243 simulations (intrusion, extrusion, rotation, tipping, and translation) were analyzed. Results: Intrusion and extrusion displayed after 4 mm bone loss showed extended stress display in the apical and middle third alveolar sockets, showing higher ischemic and resorptive risks for 0.6 N. Rotation, translation, and tipping displayed the highest stress amounts, and cervical-third stress with higher ischemic and resorptive risks after 4 mm loss for 0.6 N. Conclusions: Quantitatively, rotation, translation, and tipping are the most stressful movements. All three applied forces produced similar stress-display areas for all movements and bone levels. The stress doubled for 1.2 N and quadrupled for 2.4 N when compared with 0.6 N. The differences between the three loads consisted of the stress amounts displayed in color-coded areas, while their location and extension remained constant. Since the MHP was exceeded, a reduction in the applied force to under 0.6 N (after 4 mm of bone loss) is recommended for reducing ischemic and resorptive risks. The stress-display pattern correlated with horizontal periodontal-breakdown simulations.

In Vitro Evaluation of the Accuracy of Three Electronic Apex Locators Using Different Sodium Hypochlorite Concentrations.

Background and Objectives: The aim of this study was to compare the accuracy of three types of electronic apex locators (EALs) when two different concentrations of NaOCl irrigation solutions are used by two operators. Materials and Methods: After creating the access cavities for 20 single rooted extracted teeth, the actual canal length (ACL) of each canal was determined visually using a #10 file and magnification. The teeth were subsequently inserted in plastic molds filled with alginate. The electronic measurement of root canal length (EWL) was performed using three different electronic apex locators: Root ZX II, Apex ID, and Dual Pex. Two independent operators, an endodontic specialist with 20 years practice and an undergraduate student in the final year of study, performed the irrigation procedures with two different concentrations of NaOCl (2% and 5.25%), and then measured the EWL using each of the EALs. The accuracy of all EALs, was determined in each case by subtracting the EWL from the ACL. Statistical analyses were performed using one-way ANOVA test. Results: In the presence of 2% NaOCl solution, for a margin error of ±0.5 mm, Root ZX II, Apex ID, and Dual Pex presented an accuracy of 90%, 80%, and 85% respectively. The increase in the concentration of the irrigation solution affected the accuracy of Root ZX II and Apex ID for both operators, diminishing it to 75% for the same margin error, but improved Dual Pex's accuracy to 100%. Conclusions: The best accuracy in working length determination was obtained by Root ZX II for 2% NaOCl solution and by Dual Pex for 5.25% NaOCl solution with no significant statistical difference when compared.

Case Report of a 4-Year-Old Girl with Stage IV Grade C Localized Periodontitis (Pre-Puberal Localized Aggressive Periodontitis) Affected by Misrecognition and Late Diagnosis.

BACKGROUND AND OBJECTIVES: Stage IV grade C localized periodontitis (pre-puberal localized aggressive periodontitis/LPP) is a rare form of inflammatory periodontal disease occurring in clinically healthy individuals (no/small calculus/dental plaque traces), due a hyper-aggressive auto-immune response to high amounts of bacteria present in the oral cavity. CASE PRESENTATION: This case report describes a 4-year-old Caucasian girl with localized gingival inflammation and advanced bone loss around the temporary lower left canine. The first diagnostic assumption was hypophosphatasia, and the patient was sent for further genetic and metabolic investigations (which turned out to be negative). The LPP diagnosis was made during the family's summer holidays due to her parents' concerns about persistent gingival inflammation and tooth mobility. RESULTS: The diagnosis of LPP was supported by clinical oral examination results, earlier X-rays, earlier blood tests, and a periodontal bacterial test. The treatment was limited to avoid spreading inflammation to other teeth (via topical antibiotic treatment) due to our limited time frame, while the main problem of excessive amounts of periodontal bacteria in the oral cavity was not addressed. The tooth was eventually lost. CONCLUSIONS: The ability to early recognize radiological and clinical LPP signs correlated with understanding of its pathological auto-immune mechanism is extremely important for expanding treatment options, since bone preservation and reducing amounts of bacteria are strictly correlated with therapeutic speed.

Trabecular Bone Component Assessment under Orthodontic Loads and Movements during Periodontal Breakdown-A Finite Elements Analysis.

This numerical analysis, by employing Tresca and Von Mises failure criteria, assessed the biomechanical behavior of a trabecular bone component subjected to 0.6, 1.2, and 2.4 N orthodontic forces under five movements (intrusion, extrusion, tipping, rotation, and translation) and during a gradual horizontal periodontal breakdown (0-8 mm). Additionally, they assessed the changes produced by bone loss, and the ischemic and resorptive risks. The analysis employed eighty-one models of nine patients in 405 simulations. Both failure criteria showed similar qualitative results, with Tresca being quantitatively higher by 1.09-1.21. No qualitative differences were seen between the three orthodontic loads. Quantitatively, a doubling (1.2 N) and quadrupling (2.4 N) were visible when compared to 0.6 N. Rotation and translation followed by tipping are the most stressful, especially for a reduced periodontium, prone to higher ischemic and resorptive risks. In an intact periodontium, 1.2 N can be safely applied but only in a reduced periodontium for extrusion and intrusion. More than 0.6 N is prone to increasing ischemic and resorptive risks for the other three movements. In an intact periodontium, stress spreads in the entire trabecular structure. In a reduced periodontium, stress concentrates (after a 4 mm loss-marker for the stress change distribution) and increases around the cervical third of the remaining alveolar socket.

Developing Bioactive Hydrogels with Peptides for Dental Application.

Dental caries is an avoidable and complex condition impacting billions of individuals worldwide, posing a specific concern among younger generations, despite the progress of oral hygiene products. This deterioration occurs due to the acid demineralization of tooth enamel, leading to the loss of minerals from the enamel subsurface. The remineralisation of early enamel carious lesions could prevent the cavitation of teeth. The enamel protein amelogenin constitutes 90% of the total enamel matrix protein and plays a key role in the bio mineralisation process. The aim of this study is to investigate the self-assembly microstructure and reticulation behaviour of a newly developed bioactive hydrogel with leucine-rich amelogenin peptide (LRAP) intended for enamel remineralisation. SEM, AFM, UV-VIS, and FTIR analyses emphasize the ability of peptides to promote cell adhesion and the treatment of early carious lesions. In conclusion, short-chain peptides can be used in hydrogels for individual or professional use.

Insights into the Relationship between Periodontitis and Systemic Sclerosis Based on the New Periodontitis Classification (2018): A Cross-Sectional Study.

(1) Background: This study aimed to assess the periodontitis burden in systemic sclerosis patients and the possible association between them, and the degree to which some potential risk factors and two potential diagnostic biomarkers may account for this association. (2) Methods: This cross-sectional study included a test group (systemic sclerosis patients) and a control group (non-systemic sclerosis patients). Both groups benefited from medical, periodontal examination and saliva sampling to determine the salivary flow rate and two inflammatory biomarkers (calprotectin, psoriasin). A systemic sclerosis severity scale was established. (3) Results: In the studied groups, comparable periodontitis rates of 88.68% and 85.85%, respectively, were identified. There were no significant differences in the severity of periodontitis among different systemic sclerosis severity, or in the positivity for anti-centromere and anti-SCL70 antibodies. Musculoskeletal lesions were significantly more common in stage III/IV periodontitis (n = 33, 86.84%) than in those in stage I/II (n = 1, 100%, and n = 3, 37.5%, respectively) (p = 0.007). Comparable levels of the inflammatory mediators were displayed by the two groups. There were no significant differences in calprotectin and psoriasin levels between diffuse and limited forms of systemic sclerosis. (4) Conclusions: Within the limitations of the current study, no associations between systemic sclerosis and periodontitis, or between their risk factors, could be proven.

Effect of Remineralizing Agents on Shear Bond Strength of Orthodontic Brackets-In Vitro Study.

Orthodontic treatment can be effective only with the proper adhesion strength of the bonded elements on the teeth. The aim of the study was to analyze the influence of different remineralization products on the brackets (Evolve Low Profile Brackets 0.022 Roth prescription (DB Orthodontics Ltd., Silsden, England) shear bond strength (SBS)). In all, 40 teeth were investigated for this study; n = 30 demineralized (immersed in 0.1% citric acid for 30 min, twice a day, for 20 consecutive days) and n = 10 immersed only in artificial saliva. After the demineralization process, remineralization agents were applied to each group (n = 10): Group I: Elmex Sensitive professional® toothpaste (CP, Gaba GmbH, Witten, Germany) and GC MI Paste Plus® (GC, Leuven, Belgium), Group II: Elmex Sensitive professional® toothpaste (CP, Gaba GmbH, Germany) and GC Tooth Mousse® (Leuven, Belgium), Group III: Elmex Sensitive professional® toothpaste (CP, Gaba GmbH, Germany). For the teeth in control group C, Elmex Sensitive professional® toothpaste was used. SBS tests were performed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis (ANOVA and Tuckey test) with a statistical threshold of p < 0.05. The SBS values were higher for group II (14.20 MPa) and I (10.36 MPa) and lower for group III (4.25 MPa) and C (4.11 MPa), with statistically significant differences between groups I and II when compared with groups III and C (p < 0.05). In conclusion, GC Tooth Mousse® and MI-Paste Plus® have no adverse effect on brackets SBS and are recommended to be used for enamel remineralization during orthodontic treatment.

Orthodontic Internal Resorption Assessment in Periodontal Breakdown-A Finite Elements Analysis (Part II).

This finite elements analysis (FEA) assessed the accuracy of maximum shear stress criteria (Tresca) in the study of orthodontic internal surface resorption and the absorption-dissipation ability of dental tissues. The present study was conducted over eighty-one models totaling 324 simulations with various bone loss levels (0-8 mm), where 0.6 N and 1.2 N were applied in the intrusion, extrusion, rotation, tipping, and translation movements. Tresca criteria displayed localized high-stress areas prone to resorption for all situations, better visible in the dentine component. The internal resorptive risks are less than external ones, seeming to increase with the progression of the periodontal breakdown, especially after 4 mm. The internal and external surface high-stress areas are strictly correlated. The qualitative stress display for both forces was almost similar. The rotation and tipping displayed the highest resorptive risks for the pulp chamber, decreasing with bone loss. The resorptive risks seem to increase along with the progression of periodontal breakdown if the same applied force is kept. The dentine resemblance to ductile based on its high absorption-dissipation ability seems correct. Tresca seems to supply a better predictability of the prone-to-resorption areas than the other failure criteria.

Polymer Mixtures for Experimental Self-Limited Dental Burs Development-A Preliminary Approach (Part 1).

Alternative techniques have been investigated for effectiveness in caries removal because conventional metallic dental burs can lead to an excessive loss of sound tissue. The aim of the present study is to realize a preliminary approach in obtaining effective polymer mixtures for polymeric bur development, capable of removing primary dental caries using combinations of polymers to ensure the requirements for such instruments, but also a greater compatibility with the teeth structure. This study assessed the main mechanical properties, water sorption, solubility and microscopic structure of four new polymer mixture recipes to provide essential features in obtaining experimental self-limited dental burs. Two mixtures have in their composition polymer mixtures of Bis-phenol A diglycidyl ether dimethacrylate/Triethylene glycol dimethacrylate/Urethane dimethacrylates (R1, R2), and two other mixtures have Bis-phenol A diglycidyl ether dimethacrylate/Polymethyl methacrylate/Methyl methacrylates (R3, R4). The incorporation of nanoparticles into the polymer matrix has become essential due to the need of polymer biocompatibility increasing along with teeth surface remineralization, so that the powder charge was added to four recipes, such as 5% glass with BaF2 and 0.5% graphene with silver particles. All data sets were analyzed using the One-Way ANOVA test. R3, R4 showed higher compressive strength and diametrical compression values; these values increased when glass and graphene were added. Moreover, the addition of glass particles lead to an increase in flexural strength. Regarding the sorption, sample R3 had the most significant differences between day 69 and the rest of the investigation days, while the solubility varied at different intervals. From the mechanical evaluation, we could conclude that the Bis-GMA/PMMA/MMA mixtures fit the mechanical characteristics supported by polymer burs, following future studies regarding their use on the affected dentin.

The Treatment of Severe Periodontitis Using a Local Antiseptic Desiccant and Subgingival Mechanical Instrumentation: A Pilot Study.

This randomized, split-mouth, controlled clinical study assessed the additional clinical benefits of a local desiccant antimicrobial agent (HY) combined with subgingival mechanical instrumentation (SRP) vs. SRP alone in treating severe periodontitis. Patients with stages III and IV periodontitis received full-mouth periodontal examinations at baseline and after a three-month follow-up. Two randomly selected hemiarches in each periodontitis patient were treated with SRP plus HY and were included in the test group, while the other two hemiarches received only SRP and were included in the control group. In thirty patients, the analyses of the evolution of the periodontal parameters over time showed statistically significant mean differences for the probing depths and clinical attachment level values resulting from all the examined sites, as well as from the interproximal sites (p < 0.001) in both the test and control groups. The intergroup comparisons of the same four parameters showed no significant differences (p = 0.322, p = 0.36, p = 0.516, and p = 0.509, respectively). Based on these study results, no additional benefits were obtained after HY subgingival applications.

Oral Health-Related Knowledge, Attitude and Practice among Patients in Rural Areas around Cluj-Napoca, Romania.

The intent of the KAP (knowledge, attitude, practices) survey is to collect information about a specific target group related to their knowledge, what they consider to be known, and what they do about a particular topic. The aim of this study was to identify the level of importance of oral health, especially the level of knowledge, attitude and practices of rural patients around Cluj-Napoca, Romania. MATERIAL AND METHODS: A questionnaire consisting of five parts was used, trying to assess the self-perception of oral health, knowledge and attitude towards oral health, dental hygiene practices and eating habits. A clinical examination was also performed in order to identify the number of missing teeth, the caries and the presence of calculus. RESULTS: The study revealed that most patients have an average and good self-perception of oral health, although three-quarters of them have calculus deposits, and about half of them have more than three carious lesions and at least one extracted tooth. There is also a discrepancy between declared knowledge of oral health, eating habits and dental practices. CONCLUSIONS: The basic knowledge of rural patients about oral health can be considered satisfactory, but the practices, unfortunately, do not reflect this knowledge.

Development of New Experimental Dental Enamel Resin Infiltrants-Synthesis and Characterization.

The aim of the present study was to obtain experimental infiltration materials, intended for the treatment of dental white spots, and to investigate them. Two series of infiltrants (P1-P6)/(P1F-P6F) were obtained, based on different monomer mixtures, without/with glass filler (with fluoride release ability). Each infiltrant from the second series contained the same amount of glass powder, and each infiltrant from the (P-PF) group contained the same resin composition. The characteristics of the experimental infiltrants were investigated by degree of conversion (DC), mechanical strength, water sorption (WS), and fluoride release, in addition to residual monomer for (P1F-P6F) infiltrants. The results were compared with those obtained for commercial Icon infiltrant. For the experimental infiltrants, without/with filler, the recorded DC was in the range of 58.27-89.70%/60.62-89.99%, compared with Icon (46.94%) 24 h after polymerization. The release of fluoride depends on the permeability of the polymer matrix, with respect to the water sorption, which may help to diffuse ions in the storage medium but which can also influence the release of residual monomers. The highest flexural strengths were recorded for the (TEGDMA/HEMA/Bis-GMA) infiltrants (133.94 ± 16.389 MPa/146.31 ± 7.032 MPa). The best experimental infiltrants were P2 and P2F (Bis-GMA/HEMA/TEGDMA).

Dental Sealant Composition-Retention Assessment in Young Permanent Molars.

Tooth decay in children and adolescents remains a public health problem, despite prophylaxis and preventive measures being largely available. The aim of our study was to evaluate the clinical behavior of four dental sealants, related to first permanent molar topography and patient age (when sealant was applied for the first time). We assessed, by means of visual inspection and palpation with a dental probe, a group of 200 children, enrolled corresponding to school age-grade (mean age of 7 years at baseline) and randomly divided according to the material used as dental sealant (Admira seal©, Embrace Wet Bond©, Fotoseal©, GC Fuji Triaje©) in 4 groups (n = 50). Sealant clinical evaluation was made at 6-, 12-, 18-month intervals for dental material retention assessment. At 6 months, the sealant detached the most from 3.6 molars, and the material used was Fotoseal© (27.6%). At 12 months, Fotoseal© (48.3%) and GC Fuji Triaje© (41.4%) from 3.6 molars express detachment. At 18 months, 4.6. molars sealed with Admira Seal© (25.7%) and Embrace Wet Bond© (28.6%) lost the sealant. We noticed less detachment in maxillary molars and if sealant was applied around 7 years of age. In conclusion, sealant application on first permanent molars must be encouraged and practitioners can choose between various materials available.

Optical properties and masking capacity of flowable giomers.

BACKGROUND AND AIMS: To assess the color, translucency and masking properties of novel flowable giomers. METHODS: Three flowable giomers were used for the fabrication of 1-mm thick samples (n=126) in three different consistencies (Beautifil flow Plus X F00; Beautifil flow F02; Beautifil flow Plus X F03, Shofu Dental Corporation, Japan) and two shades (VITA Classical shade A2 and A3). The relative spectral reflectance was recorded over white, black, C3 (VITA Classical shade C3 simulating a severe tooth discoloration), and a tested-sample colored background. Lightness (L*), and color coordinates a* and b*, Relative Translucency parameter (RTP00) and masking capacity of C3 background were calculated; differences in color and translucency were compared with thresholds for perceptibility and acceptability (PT and AT). Statistical analyses used significance tests for paired samples. RESULTS: All tested materials displayed increased values of L*: for A2 F00=86.16(±0.86), F02=86.39(±0.63), F03=86.40(±0.63); for A3: F00=84.24(±0.58), F02=83.34(±0.3), F03=84.19(±0.4), as well as of RTP: for A2 F00=30.34(±0.88), F02=31.37(±0.94), F03=31.11(±1.15), for A3 F00=29.64(±1.64), F02=30.79(±1.02), F03=30.1(±1.26). For A2 samples, the masking capacity was significantly different for all materials, whilst for A3 there were differences only between F00-F03 and F02-F03. CONCLUSIONS: The tested flowable giomers proved high values of lightness and translucency. The color differences between the materials with the same designation and different consistencies were below the perceptibility threshold in most cases. In addition, the differences in relative translucency parameter ranged between the perceptibility and acceptability thresholds. However, all tested flowable giomers had an unacceptable masking capacity for a dyschromic background.

In Vitro Study on the Adhesive Performance of Some Resin-Based Materials Used to Restore Class II Cavities.

The study aimed to evaluate the adhesive performances of two ormocer materials and two micro-hybrid composites placed to restore class II cavities. We tested the null hypothesis, which considered that the adhesive behaviors of tested materials did not differ. On each extracted tooth, two class II cavities were prepared having an enamel located cervical margin and a cementum located cervical margin, respectively, and were restored using two different restoration techniques. The teeth followed a tooth impregnating protocol and were sectioned and evaluated by optical microscopy to highlight the marginal microleakage around restorations. Cervical and occlusal microleakage as well as microleakage ratios were calculated. The microleakage test showed that all tested materials exhibited some degree of dentinal microleakage both on cervical and occlusal areas irrespective of the restoration technique. Some significant differences were recorded in adhesion performance of the materials. The cervical microleakage ratio was significantly increased for one of the micro-hybrid resin composites in comparison with one of the ormocer materials (p = 0.0159). Significantly differences were observed in occlusal microleakage ratios when the two micro-hybrid composites were compared (p = 0.047). The results failed to reject the null hypothesis. The present study could not demonstrate the superiority of ormocer-materials relative to conventional composites.

Cytotoxic Effects on Gingival Mesenchymal Stromal Cells and Root Surface Modifications Induced by Some Local Antimicrobial Products Used in Periodontitis Treatment.

(1) Background: this study aims to test the cytotoxicity of three antimicrobial products used in periodontitis treatment on gingival mesenchymal stem cells (gMSCs) and their influence on root surfaces and gMSC adhesion. We tested the null hypothesis that the effects of the antimicrobials did not differ. (2) Methods: the commercial products based on sulphonic/sulphuric acids, sodium hypochlorite and silver nanoparticles, in five different concentrations, were added to culture medium for growing gMSCs. Cell proliferation capacity was tested using the Cell Counting Kit-8 (CCK8) and their viability was determined by succinate dehydrogenase activity (MTT) assay. Scanning electron microscopy evaluated the adhesion of gMSCs on root samples treated mechanically and with commercial products. (3) Results: the products induced a dose-dependent cytotoxicity in terms of reduced proliferation and viability of gMSCs, as well as cell shape modifications. Significant differences in CCK8 values between the different commercial products were observed. Based on proliferation tests, the null hypothesis was rejected. When MTT values of the three products were compared with each other, no significant differences were observed for any of the five concentrations (p = 0.065, p = 0.067, p = 0.172, p = 0.256, p = 0.060). (4) Conclusions: the three antimicrobials had a certain degree of cytotoxicity on gMSCs. gMSCs repopulated treated root surfaces.

Toothpaste Composition Effect on Enamel Chromatic and Morphological Characteristics: In Vitro Analysis.

The aim of this in vitro study was to assess the effect of toothpastes, with different compositions, on optical and morphological features of sound and demineralized enamel. We selected twenty-five teeth, recently extracted for orthodontic purposes, for this in vitro study. The teeth were caries free, without stains, fissures, filling or hypoplasia observed at inspection under standard conditions. Teeth were brushed (for 2-3 min, twice a day, for 21 days), with five different toothpastes (four commercially available and an experimental one) containing fluoride and hydroxyapatite. After that, teeth were demineralized with 37% orthophosforic acid (Ultra Etch®, Ultradent Products Inc., South Jordan, UT, USA) for 60 s. We repeated the brushing protocol for another 21 days on demineralized enamel. Enamel vestibular surfaces were examined using a spectrophotometer (Vita EasyShade -Vita Zahnfabrik, Bad Sackingen, Germany) and a Scanning Electron Microscope (Inspect S®, FEI Company, Hillsboro, OR, USA). Differences were statistically significant for colour parameters L* and ΔE*. SEM evaluation reveals demineralized enamel mineral gain after brushing with selected toothpastes. Toothpastes with specific ingredients can represent a balance between aesthetic and mineralization, and an oral hygiene correct algorithm is able to preserve enamel characteristics during ortodontic treatement with fixed appliances.