Luminescence Properties of Al2O3:Ti in the Blue and Red Regions: A Combined Theoretical and Experimental Study.

Using jointly experimental results and first-principles calculations, we unambiguously assign the underlying mechanisms behind two commonly observed luminescence bands for the Al2O3 material. Indeed, we show that the red band is associated with a Ti3+ d-d transition as expected, while the blue band is the combination of the Ti3+ + O- → Ti4+ + O2- and VO•+e- → VO× de-excitation processes. Thanks to our recent developments, which take into account the vibrational contributions to the electronic transitions in solids, we were able to simulate the luminescence spectra for the different signatures. The excellent agreement with the experiment demonstrates that it should be possible to predict the color of the material with a CIE chromaticity diagram. We also anticipated the luminescence signature of Al2O3:Ti,Ca and Al2O3:Ti,Be that were confirmed by experiment.

Revisiting the Crystal Structure of Layered Oxychalcogenides Ln2O2S2 (Ln = La, Pr, and Nd).

La2O2S2 was recently used as a precursor to prepare either a new metastable form of La2O2S by de-insertion of half of sulfur atoms of (S2) dimers or quaternary compounds by insertion of a coinage metal (e.g., La2O2Cu2S2). A strong structural relationship exists between the polysulfide precursor and the synthesized products, which highlights the topochemical nature of these reactions. Nevertheless, the crystal structure of the precursor material is still a matter of debate. Namely, several structural models were reported so far in the literature with different space groups and/or crystal systems. All these models were built upon infinite [Ln2O2] slabs separated from each other by a flat sulfur layer of (S2) dumbbells. Nevertheless, all (S2) dimers within a given sulfur layer may rotate in phase by 90° compared to the ideal model that induces an overall atomic disorder in (S2) dimer orientation along the stacking axis. This leads to some imbroglio and much confusion in the description of structural arrangement of Ln2O2S2 materials. Herein, the crystal structures of La2O2S2 and its Pr and Nd variants are revisited. We propose an alternative model that reconciles pre-existing structural descriptions of Ln2O2S2 (Ln = La, Pr, and Nd) materials and highlights the strong dependency of the degree of long-range ordering of the sulfur layers on the synthesis conditions.

Impact of Nanostructuration on the Chemical Composition of Nickel Oxide Nanoparticles.

Reduction of the size of a particle down to a few tens of nanometers or below may drastically affect its physical properties. That is well-known for quantum dots. Conversely, many works consider the chemical composition of nanoparticles as invariant upon reduction of their dimension. Here we demonstrate that the chemical composition of a transition-metal oxide, namely, nickel oxide, is drastically affected by its nanostructuration.

Evidence of Wolframite-Type Structure in Ultrasmall Nanocrystals with a Targeted Composition MnWO4.

Here, we report a study of white-ochre powders with targeted composition MnWO4 prepared via a coprecipitation method. Through X-ray total scattering combined with pair distribution function analysis and Rietveld refinement of X-ray diffraction data, we find that their crystal structure is similar to that of bulk-MnWO4, despite a mean crystallite size of 1.0-1.6 nm and a significant deviation of the average chemical composition from MnWO4. The chemical formula derived from elemental and thermogravimetric analyses is Mn0.8WO3.6(OH)0.4·3H2O. X-ray absorption and magnetic susceptibility measurements show that Mn and W have the same oxidation states as in MnWO4. No magnetic ordering or spin glass or superparamagnetic behavior is observed above 2 K, unlike in the case of MnWO4 nanocrystals having a mean size higher than 10 nm.

Incorporation of Jahn-Teller Cu(2+) Ions into Magnetoelectric Multiferroic MnWO4: Structural, Magnetic, and Dielectric Permittivity Properties of Mn1-xCuxWO4 (x ≤ 0.25).

Polycrystalline samples of Mn1-xCuxWO4 (x ≤ 0.5) have been prepared by a solid-state synthesis as well as from a citrate synthesis at moderate temperature (850 °C). The goal is to study changes in the structural, magnetic, and dielectric properties of magnetoelectric type-II multiferroic MnWO4 caused by replacing Jahn-Teller-inactive Mn(2+) (d(5), S = 5/2) ions with Jahn-Teller-active Cu(2+) (d(9), S = 1/2) ions. Combination of techniques including scanning electron microscopy, powder X-ray and neutron diffraction, and Raman spectroscopy demonstrates that the polycrystalline samples with low copper content 0 ≤ x ≤ 0.25 are solid solution that forms in the monoclinic P2/c space group. Rietveld analyses indicate that Cu atoms substitutes for Mn atoms at the Mn crystallographic site of the MnWO4 structure and suggest random distributions of Jahn-Teller-distorted CuO6 octahedra in the solid solution. Magnetic susceptibility reveals that only 5% of Cu substitution suppresses the nonpolar collinear AF1 antiferromagnetic structure observed in pure MnWO4. Type-II multiferroicity survives a weak Cu substitution rate (x < 0.15). Multiferroic transition temperature and Néel temperature increase as the amount of Cu increases. New trends in some of the magnetic properties and in dielectric behaviors are observed for x = 0.20 and 0.25. Careful analysis of the magnetic susceptibility reveals that the incorporation of Cu into MnWO4 strengthens the overall antiferromagnetic interaction and reduces the magnetic frustration.

Pair distribution function and density functional theory analyses of hydrogen trapping by γ-MnO2.

In the presence of "Ag2O" as a promoter, γ-MnO2 traps dihydrogen in its (2 × 1) and (1 × 1) tunnels. The course of this reaction was examined by analyzing the X-ray diffraction patterns of the HxMnO2/"Ag2O" system (0 ≤ x < 1) on the basis of pair distribution function and density functional theory (DFT) analyses. Hydrogen trapping occurs preferentially in the (2 × 1) tunnels of γ-MnO2, which is then followed by that in the (1 × 1) tunnels. Our DFT analysis shows that this process is thermodynamically favorable.

Thermochromism in yttrium iron garnet compounds.

Polycrystalline yttrium iron garnet (Y3Fe5O12, hereafter labeled YIG) has been synthesized by solid-state reaction, characterized by X-ray diffraction, Mössbauer spectroscopy, and UV-vis-NIR diffuse reflectance spectroscopy, and its optical properties from room temperature (RT) to 300 °C are discussed. Namely, its greenish color at RT is assigned to an O(2-) → Fe(3+) ligand-to-metal charge transfer at 2.57 eV coupled with d-d transitions peaking at 1.35 and 2.04 eV. When the temperature is raised, YIG displays a marked thermochromic effect; i.e., the color changes continuously from greenish to brownish, which offers opportunities for potential application as a temperature indicator for everyday uses. The origin of the observed thermochromism is assigned to a gradual red shift of the ligand-to-metal charge transfer with temperature while the positioning in energy of the d-d transitions is almost unaltered. Attempts to achieve more saturated colors via doping (e.g., Al(3+), Ga(3+), Mn(3+), ...) remained unsuccessful except for chromium. Indeed, Y3Fe5O12:Cr samples exhibit at RT the same color than the undoped garnet at 200 °C. The introduction of Cr(3+) ions strongly impacts the color of the Y3Fe5O12 parent either by an inductive effect or, more probably, by a direct effect on the electronic structure of the undoped material with formation of a midgap state.

Photochromic properties of polyoxotungstates with grafted spiropyran molecules.

The first systems associating in a single molecule polyoxotungstates (POTs) and photochromic organic groups have been elaborated. Using the (TBA)4[PW11O39{Sn(C6H4I)}] precursor, two hybrid organic-inorganic species where a spiropyran derivative (SP) has been covalently grafted onto a {PW11Sn} fragment via a Sonogashira coupling have been successfully obtained. Alternatively, a complex containing a silicotungstate {PW11Si2} unit connected to two spiropyran entities has been characterized. The purity of these species has been assessed using several techniques, including (1)H and (31)P NMR spectroscopy, mass spectrometry, and electrochemical measurements. The optical properties of the hybrid materials have been investigated both in solution and in the solid state. These studies reveal that the grafting of SPs onto POTs does not significantly alter the photochromic behavior of the organic chromophore in solution. In contrast, these novel hybrid SP-POT materials display highly effective solid-state photochromism from neutral SP molecules initially nonphotochromic in the crystalline state. The photoresponses of the SP-POT systems in the solid state strongly depend on the nature and the number of grafted SP groups.

Sulfonium polyoxometalates: a new class of solid-state photochromic hybrid organic-inorganic materials.

For the very first time, sulfonium polyoxometalate (POM) assemblies are shown to develop efficient solid-state photochromism in ambient conditions. The optical properties of the already known Rb(0.75)(NH(4))(5.25)[(Mo(3)O(8))(2)O(O(3)PC(CH(2)S(CH(3))(2))OPO(3))(2)]·8H(2)O (1) and a new material (Me(3)S)(4)[Mo(8)O(26)] (2) under UV excitation are investigated by diffuse reflectance spectroscopy, revealing that the color change effect is highly tunable playing with the nature of the POM. A mechanism involving the photoreduction of Mo(6+) cations associated with electron transfers from the sulfonium cations toward the POMs is proposed.

Novel soft-chemistry route of Ag2Mo3O10·2H2O nanowires and in situ photogeneration of a Ag@Ag2Mo3O10·2H2O plasmonic heterostructure.

Ultrathin Ag2Mo3O10·2H2O nanowires (NWs) were synthesized by soft chemistry under atmospheric pressure from a hybrid organic-inorganic polyoxometalate (CH3NH3)2[Mo7O22] and characterized by powder X-ray diffraction, DSC/TGA analyses, FT-IR and FT-Raman spectroscopies, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Their diameters are a few tens of nanometers and hence much thinner than that found for silver molybdates commonly obtained under hydrothermal conditions. The optical properties of Ag2Mo3O10·2H2O NWs before and after UV irradiation were investigated by UV-vis-NIR diffuse reflectance spectroscopy revealing, in addition to photoreduction of Mo(6+) to Mo(5+) cations, in situ photogeneration of well-dispersed silver Ag(0) nanoparticles on the surface of the NWs. The resulting Ag@Ag2Mo3O10·2H2O heterostructure was confirmed by electron energy-loss spectroscopy (EELS), X-ray photoelectron spectroscopy (XPS), and Auger spectroscopy. Concomitant reduction of Mo(6+) and Ag(+) cations under UV excitation was discussed on the basis of electronic band structure calculations. The Ag@Ag2Mo3O10·2H2O nanocomposite is an efficient visible-light-driven plasmonic photocatalyst for degradation of Rhodamine B dye in aqueous solution.

Microstructured layered-kagome BaCo3(VO4)2(OH)2 with variable crystallite size: alternative synthetic route and comparison with nanostructured samples.

Microplatelets of the layered-kagome compound BaCo3(VO4)2(OH)2, which is the Co2+ analogue of mineral vesignieite BaCu3(VO4)2(OH)2, have been prepared with very high yield by hydrothermal reaction using synthetic karpenkoite Co3V2O7(OH)2·2H2O as starting reagent. The Rietveld refinement of X-ray diffraction data indicates that Co3V2O7(OH)2·2H2O is isostructural with martyite Zn3V2O7(OH)2·2H2O. Two single-phased samples of microstructured BaCo3(VO4)2(OH)2 have been characterized using powder X-ray diffraction, FT-IR and Raman spectroscopies, thermal analyses, scanning electron microscopy, energy-dispersive X-ray spectroscopy and magnetisation measurements. Their crystallite sizes perpendicular to the c-axis are in the range of 92(3) to 146(6) nm and depend on the synthesis conditions. Results have been compared to those previously obtained for quasi-spherical nanoparticles having a crystallite size of the order of 20 nm, to explore the effect of the crystallite size on the properties of BaCo3(VO4)2(OH)2. This study highlights that the magnetic properties depend on the crystallite sizes only at low temperatures.

Micro- and nanostructured layered-kagome zinc orthovanadate BaZn3(VO4)2(OH)2.

Pure micro- and nanocrystalline powders of the layered-kagome zinc orthovanadate BaZn3(VO4)2(OH)2 have been successfully prepared and thoroughly characterised. Microstructured samples (BaZn3-MPs) have been produced by hydrothermal reaction using synthetic martyite Zn3V2O7(OH)2·2H2O as the starting reagent. Nanoparticles (NPs) with an average size of ≈ 60 nm (BaZn3-NPs-7h) or ≈ 50 nm (BaZn3-NPs-25min) have been obtained by using a coprecipitation method at ambient pressure, and by varying the stirring time. Rietveld refinements of X-ray diffraction data indicate that micro- and nanostructured BaZn3(VO4)2(OH)2 both crystallize in a R3̄m structure very similar to that of the known layered-kagome compound BaCo3(VO4)2(OH)2. Transmission electron microscopy observation of BaZn3-NPs-7h and BaZn3-NPs-25min reveals crystallized NPs with homogenous distributions of Ba, Zn, and V elements. FT-IR and Raman spectra show subtle differences between micro- and nanostructured samples which cannot be linked to any differences in the average crystal structures. The high resolution 51V MAS NMR spectrum of BaZn3-MPs shows a single isotropic line attributed to VO43- groups with C3v point group. The spectra of the nanostructured samples reveal the presence of a weak additional signal which decreases in intensity with increasing the NPs size, and which has been tentatively assigned to the presence at the surface of the NPs of a small amount of V5+ ions in a different chemical environment. Nanostructuring also impacts the optical properties of BaZn3(VO4)2(OH)2. The UV-vis absorption spectra of NPs exhibit an additional weak transition in the visible domain which is not observed for the microstructured sample.

New hybrid layered molybdates based on (2/∞)[Mo(n)O(3n+1)]2- units (n = 7, 9) with systematic organic-inorganic interfaces.

Two new hybrid organic-inorganic molybdates based on layered (2/∞)[Mo(n)O(3n+1)](2-) blocks and organoammonium cations (+)(Me(x)H(3-x)N)(CH(2))(6)(NH(3-x)Me(x))(+) (x = 0-1), namely, (H(3)N(CH(2))(6)NH(3))[Mo(7)O(22)]·H(2)O (1) and (MeH(2)N(CH(2))(6)NH(2)Me)[Mo(9)O(28)] (2), have been synthesized under hydrothermal conditions. The (2/∞)[Mo(9)O(28)](2-) unit in 2 is an unprecedented member of the (2/∞)[Mo(n)O(3n+1)](2-) family with the n value extended to 9. The structural filiation between the (2/∞)[Mo(n)O(3n+1)](2-) (n = 5, 7, 9) blocks is well established, and their structural similarity with the (2/∞)[MoO(3)] slabs in α-MoO(3) is also discussed. Single-crystal X-ray analyses show that the (2/∞)[Mo(n)O(3n+1)](2-) layers in 1 and 2 are pillared in the three-dimensional networks by the organic cations with a similar connection at the organic-inorganic interface. In addition, a correlation between the topology of the (2/∞)[Mo(n)O(3n+1)](2-) blocks in 1 and 2 and the overall sizes of the associated organic cations is pointed out. Finally, the efficiency of Fourier transform Raman spectroscopy to easily discriminate the different (2/∞)[Mo(n)O(3n+1)](2-) blocks (n = 5, 7, 9) in hybrid organic-inorganic layered molybdate materials is clearly evidenced.

Tuning the photochromic properties of molybdenum bisphosphonate polyoxometalates.

Seven hybrid organic-inorganic bisphosphonate molybdenum(VI) polyoxometalate complexes with the general formula [(Mo(3)O(8))(4)(O(3)PC(C(m)H(2m)NRR'R″)(O)PO(3))(4)](8-) (m = 3; R, R', and R″ = H or CH(3)) and [(Mo(3)O(8))(2)(O)(O(3)PC(C(m)H(2m)NRR'R″)(O)PO(3))(2)](6-) (m = 3 or 4; R, R', and R″ = H or CH(3)) have been synthesized and their structures solved using single-crystal X-ray diffraction. These compounds are made of a {Mo(12)} or a {Mo(6)} inorganic core functionalized by various alkylammonium bisphosphonates, with these ligands differing by the length of their alkyl chains and the number of methyl groups grafted on the N atom. The nature of the counter-cations (Na(+), K(+), Rb(+), Cs(+), and/or NH(4)(+)) constituting these materials has also been modulated. (31)P NMR spectroscopic studies in aqueous media have shown that all the dodecanuclear complexes reported here are stable in solution, whereas for the hexanuclear compounds, a dynamic equilibrium between two isomers has been evidenced, and the corresponding standard thermodynamic parameters determined for one of them. The electrochemical properties of six representative compounds of this family have been investigated. It has been found that the Mo(6+)/Mo(5+) reduction potential is similar for all the polyoxometalates studied. Besides, it is shown that electrochemical cycling is an efficient method for the deposition of these compounds on a surface. The photochromic properties of all the complexes reported herein have been studied in the solid state. Under irradiation in the near ultraviolet (UV), the {Mo(12)} systems shift from white to reddish-brown, while the {Mo(6)} compounds develop a purple coloration. The coloration kinetics has been systematically quantified and the optical band gaps, the salient coloration kinetic parameters and the coloration kinetic half-life times have been determined. This has evidenced that several of these materials develop very strong and rapid UV-induced color changes, with remarkable coloration contrasts. Finally, the optical properties of these systems are discussed in light of several salient parameters as the POM topology, the nature of the grafted bisphosphonate ligand, and the design of the hydrogen-bonding network at the organic-inorganic interface.

Smart heterostructures for tailoring the optical properties of photochromic hybrid organic-inorganic polyoxometalates.

A new concept of photoresponsive composites has been elaborated by intimately connecting a Photochromic Phase (PP), (H(2)DABCO)(2)(HDMA)(0.5)Na(0.75)(H(3)O)(0.75)[Mo(8)O(27)]·3H(2)O (1), with a second hybrid organic-inorganic molybdate material, (H(2)DABCO)(HDABCO)[Fe(OH)(6)Mo(6)O(18)]·4H(2)O (2) acting as an Oxidation Catalytic Phase (OCP) toward the former once photoexcited. The association of both the PP and the OCP in the composite drastically improves the bleaching process of the PP alone because of efficient electronic transfers through the OCP-PP interface without affecting significantly its photoinduced color change characteristic. Two OCP-PP composites with different PP weight percents have been obtained by associating 1 with 2. The optical properties of these composites before and after UV irradiation have been investigated by Diffuse Reflectance Spectroscopy, and the strong impact of the OCP on the fading kinetics of the PP has been clearly highlighted.

Characterization and properties of novel gallium-doped calcium phosphate ceramics.

Addition of a gallium (Ga) precursor in the typical reaction protocols used for the preparation of ß-tricalcium phosphate (ß-TCP) led to novel Ga-doped ß-TCP ceramics with rhombohedral structures (R3c space group). From the refinement of their X-ray diffraction patterns, it was found that the incorporation of Ga in the ß-TCP network occurs by substitution of one of the five calcium (Ca) sites, while occupation of another Ca site decreases in inverse proportion to the Ga content in the structure. The Ga local environment and the modification of the phosphorus environments due to the Ga/Ca substitution in Ga-doped ß-TCP compounds are probed using (31)P and (71)Ga magic-angle spinning NMR. A decrease of the unit cell volume is observed with increasing Ga content, together with improved mechanical properties. Indeed, the compressive strength of these new bioceramics is enhanced in direct proportion of the Ga content, up to a 2.6-fold increase as compared to pure ß-TCP.

How does the synthesis temperature impact hybrid organic-inorganic molybdate material design?

We investigate the reactivity of MoO(4)(2-) toward six organoammonium cations (+)(Me(3-x)H(x)N)(CH(2))(2)(NH(y)Me(3-y))(+) (x, y = 1-3) at different synthesis temperatures ranging from 70 to 180 °C. A total of 16 hybrid organic-inorganic materials have been synthesized at an initial pH of 2, via ambient pressure and hydrothermal routes, namely, (H(2)en)[Mo(3)O(10)]·H(2)O (1), (H(2)en)[Mo(3)O(10)] (2), (H(2)en)[Mo(5)O(16)] (3), (H(2)MED)(2)[Mo(8)O(26)]·2H(2)O (4), (H(2)MED)[Mo(5)O(16)] (5), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (6), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (7), (N,N'-H(2)DMED)(2)[Mo(8)O(26)] (8), (N,N'-H(2)DMED)[Mo(5)O(16)] (9), (H(2)TriMED)(2)[Mo(8)O(26)]·4H(2)O (10), (H(2)TriMED)(2)[Mo(8)O(26)]·2H(2)O (11), (H(2)TriMED)[Mo(7)O(22)] (12), (H(2)TMED)(2)[Mo(8)O(26)]·2H(2)O (13), (H(2)TMED)(2)[Mo(8)O(26)] (14), (H(2)TMED)(2)[Mo(8)O(26)] (15), and (H(2)TMED)[Mo(7)O(22)] (16). All of these compounds contain different polyoxomolybdate (Mo-POM) blocks, i.e., discrete ß-[Mo(8)O(26)](4-) blocks in 6, 10, 13, 14, (1)/(∞)[Mo(3)O(10)](2-), and (1)/(∞)[Mo(8)O(26)](4-) polymeric chains in 1, 2, 4, 7, 8, and 15, respectively, and (2)/(∞)[Mo(5)O(16)](2-) and (2)/(∞)[Mo(7)O(22)](2-) layers in 3, 5, 9, 12, and 16, respectively. The structures of 5, 9, and 14 have been resolved by single-crystal X-ray analyses. The characterization of the different Mo-POM blocks in 1-16 by Fourier transform Raman spectroscopy is reported. The impact of the synthesis temperature on both the composition and topology of the Mo-POM blocks is highlighted.

Reactivity of NH4H2PO4 toward LaCl3 in LiCl-KCl melt flux. Step by step formation of monazite-like LaPO4.

The synthesis of lanthanum phosphates in molten LiCl-KCL eutectic was chosen to address the preliminary treatment of chlorinated wastes containing fission products that are already present in a Li/Cl eutectic. The obtained monazite compound shows interesting properties to be considered as a good candidate to trap lanthanum for a long-time. The synthesis route based on LaCl(3) reaction with NH(4)H(2)PO(4) in a stoichiometric amount is a key point to obtain monazite as a pure phase. Hence, the salt composition is not modified during the synthesis reaction. The chemical reactivity of ammonium dihydrogenphosphate (NH(4)H(2)PO(4), hereafter abbreviated ADP) toward lanthanum chloride (LaCl(3)) in molten LiCl-KCl eutectic is probed by NMR spectroscopy to follow the formation of LaPO(4). Formally, a direct transformation of the two aforementioned precursors into LaPO(4), NH(4)Cl and HCl can be discarded on the basis of the low thermal stability of ADP. To shed some light on the formation of LaPO(4), in situ and ex situ NMR experiments were carried out on LiCl-KCl/LaCl(3)/ADP, as well as LiCl-KCl/ADP, KCl/ADP, and LiCl/ADP mixtures. First, the reactivity of the precursors in contact with the eutectic was studied from room temperature to 600 degrees C by means of (31)P, (35)Cl, and (139)La high temperature NMR. Second, ex situ room temperature magic angle spinning (MAS) and RadioFrequency driven recoupling (RFDR) (31)P solid-state NMR experiments were carried out on solid samples prepared in different conditions (i.e., temperature and atmosphere) and quenched at room temperature to identify frozen intermediate species in their metastable state. On the basis of this approach, we propose a model for the LaPO(4) formation based on a multistep mechanism which highlights the strong reactivity of ADP toward the alkaline salts but without final change in the composition of the solvent.

Unravelling the origin of the giant Zn deficiency in wurtzite type ZnO nanoparticles.

Owing to its high technological importance for optoelectronics, zinc oxide received much attention. In particular, the role of defects on its physical properties has been extensively studied as well as their thermodynamical stability. In particular, a large concentration of Zn vacancies in ZnO bulk materials is so far considered highly unstable. Here we report that the thermal decomposition of zinc peroxide produces wurtzite-type ZnO nanoparticles with an extraordinary large amount of zinc vacancies (>15%). These Zn vacancies segregate at the surface of the nanoparticles, as confirmed by ab initio calculations, to form a pseudo core-shell structure made of a dense ZnO sphere coated by a Zn free oxo-hydroxide mono layer. In others terms, oxygen terminated surfaces are privileged over zinc-terminated surfaces for passivation reasons what accounts for the Zn off-stoichiometry observed in ultra-fine powdered samples. Such Zn-deficient Zn1-xO nanoparticles exhibit an unprecedented photoluminescence signature suggesting that the core-shell-like edifice drastically influences the electronic structure of ZnO. This nanostructuration could be at the origin of the recent stabilisation of p-type charge carriers in nitrogen-doped ZnO nanoparticles.

Polarized infrared reflectance spectra of brushite (CaHPO4·2H2O) crystal investigation of the phosphate stretching modes.

Polarized infrared (IR) reflectance measurements at near-normal incidence were recorded from the ac-plane of a monoclinic brushite (CaHPO4·2H2O) crystal in the 800-1200 cm(-1) spectral range (P-O stretching modes). The adjustment of these data, on the basis of a dispersion analysis (DA) model for monoclinic case, allowed the determination of oscillators parameters for the four P-O stretching observed modes of the phosphate group.