Electrocatalytic metal hydride generation using CPET mediators.

Transition metal hydrides (M-H) are ubiquitous intermediates in a wide range of enzymatic processes and catalytic reactions, playing a central role in H+/H2 interconversion1, the reduction of CO2 to formic acid (HCOOH)2 and in hydrogenation reactions. The facile formation of M-H is a critical challenge to address to further improve the energy efficiency of these reactions. Specifically, the easy electrochemical generation of M-H using mild proton sources is key to enable high selectivity versus competitive CO and H2 formation in the CO2 electroreduction to HCOOH, the highest value-added CO2 reduction product3. Here we introduce a strategy for electrocatalytic M-H generation using concerted proton-electron transfer (CPET) mediators. As a proof of principle, the combination of a series of CPET mediators with the CO2 electroreduction catalyst [MnI(bpy)(CO)3Br] (bpy = 2,2'-bipyridine) was investigated, probing the reversal of the product selectivity from CO to HCOOH to evaluate the efficiency of the manganese hydride (Mn-H) generation step. We demonstrate the formation of the Mn-H species by in situ spectroscopic techniques and determine the thermodynamic boundary conditions for this mechanism to occur. A synthetic iron-sulfur cluster is identified as the best CPET mediator for the system, enabling the preparation of a benchmark catalytic system for HCOOH generation.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes.

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.

Elucidation of Factors That Govern the 2e-/2H+ vs 4e-/4H+ Selectivity of Water Oxidation by a Cobalt Corrole.

Considering the importance of water splitting as the best solution for clean and renewable energy, the worldwide efforts for development of increasingly active molecular water oxidation catalysts must be accompanied by studies that focus on elucidating the mode of actions and catalytic pathways. One crucial challenge remains the elucidation of the factors that determine the selectivity of water oxidation by the desired 4e-/4H+ pathway that leads to O2 rather than by 2e-/2H+ to H2O2. We now show that water oxidation with the cobalt-corrole CoBr8 as electrocatalyst affords H2O2 as the main product in homogeneous solutions, while heterogeneous water oxidation by the same catalyst leads exclusively to oxygen. Experimental and computation-based investigations of the species formed during the process uncover the formation of a Co(III)-superoxide intermediate and its preceding high-valent Co-oxyl complex. The competition between the base-catalyzed hydrolysis of Co(III)-hydroperoxide [Co(III)-OOH]- to release H2O2 and the electrochemical oxidation of the same to release O2 via [Co(III)-O2•]- is identified as the key step determining the selectivity of water oxidation.

Homogeneous Electrochemical Reduction of CO2 to CO by a Cobalt Pyridine Thiolate Complex.

The chemical and electrochemical reduction of CO2 to value added chemicals entails the development of efficient and selective catalysts. Synthesis, characterization and electrochemical CO2 reduction activity of a air-stable cobalt(III) diphenylphosphenethano-bis(2-pyridinethiolate)chloride [{Co(dppe)(2-PyS)2}Cl, 1-Cl] complex is divulged. The complex reduces CO2 under homogeneous electrocatalytic conditions to produce CO with high Faradaic efficiency (FE > 92%) and selectivity in the presence of water. Through detailed electrochemical investigations, product analysis, and mechanistic investigations supported by theoretical calculations, it is established that complex 1-Cl reduces CO2 in its Co(I) state. A reductive cleavage leads to a dangling protonated pyridine arm which enables facile CO2 binding through a H-bond donation and facilitates the C-O bond cleavage via a directed protonation. A systematic benchmarking of this catalyst indicates that it has a modest overpotential (∼180 mV) and a TOF of ∼20 s-1 for selective reduction of CO2 to CO with H2O as a proton source.

Synthesis and Characterization of Ion Pairs between Alkaline Metal Ions and Anionic Anti-Aromatic and Aromatic Hydrocarbons with π-Conjugated Central Seven- and Eight-Membered Rings.

The synthesis, isolation and full characterization of ion pairs between alkaline metal ions (Li+, Na+, K+) and mono-anions and dianions obtained from 5H-dibenzo[a,d]cycloheptenyl (C15H11 = trop) is reported. According to Nuclear Magnetic Resonance (NMR) spectroscopy, single crystal X-ray analysis and Density Functional Theory (DFT) calculations, the trop‒ and trop2-• anions show anti-aromatic properties which are dependent on the counter cation M+ and solvent molecules serving as co-ligands. For comparison, the disodium and dipotassium salt of the dianion of dibenzo[a,e]cyclooctatetraene (C16H12 = dbcot) were prepared, which show classical aromatic character. A d8-Rh(I) complex of trop- was prepared and the structure shows a distortion of the C15H11 ligand into a conjugated 10π -benzo pentadienide unit-to which the Rh(I) center is coordinated-and an aromatic 6π electron benzo group which is non-coordinated. Electron transfer reactions between neutral and anionic trop and dbcot species show that the anti-aromatic compounds obtained from trop are significantly stronger reductants.

Electroreduction of CO2 to Formate with Low Overpotential using Cobalt Pyridine Thiolate Complexes.

Electrocatalytic CO2 reduction to value-added products provides a viable alternative to the use of carbon sources derived from fossil fuels. Carrying out these transformations at reasonable energetic costs, for example, with low overpotential, remains a challenge. Molecular catalysts allow fine control of activity and selectivity via tuning of their coordination sphere and ligand set. Herein we investigate a series of cobalt(III) pyridine-thiolate complexes as electrocatalysts for CO2 reduction. The effect of the ligands and proton sources on activity was examined. We identified bipyridine bis(2-pyridinethiolato) cobalt(III) hexaflurophosphate as a highly selective catalyst for formate production operating at a low overpotential of 110 mV with a turnover frequency (TOF) of 10 s-1 . Electrokinetic analysis coupled with density functional theory (DFT) computations established the mechanistic pathway, highlighting the role of metal hydride intermediates. The catalysts deactivate via the formation of stable cobalt carbonyl complexes, but the active species could be regenerated upon oxidation and release of coordinated CO ligands.

Oxygen-Tolerant H2 Production by [FeFe]-H2ase Active Site Mimics Aided by Second Sphere Proton Shuttle.

The instability of [FeFe]-H2ases and their biomimetics toward O2 renders them inefficient to implement in practical H2 generation (HER). Previous investigations on synthetic models as well as natural enzymes proved that reactive oxygen species (ROS) generated on O2 exposure oxidatively degrades the 2Fe subcluster within the H-cluster active site. Recent electrochemical studies, coupled with theoretical investigations on [FeFe]-H2ase suggested that selective O2 reduction to H2O could eliminate the ROS, and hence, tolerance against oxidative degradation could be achieved ( Nat. Chem. 2017, 9, 88-95). We have prepared a series of 2Fe subsite mimics with substituted arenes attached to bridgehead N atoms in the S to S linker, (µ-S2(CH2)2NAr)[Fe(CO)3]2. Structural analyses find the nature of the substituent on the arene offers steric control of the orientation of bridgehead N atoms, affecting their proton uptake and translocation ability. The heterogeneous electrochemical studies of these complexes physiadsorbed on edge plane graphite (EPG) electrode show the onset of HER activity at ∼180 mV overpotential in pH 5.5 water. In addition, bridgehead N-protonation and subsequent H-bonding capability are established to facilitate the O-O bond cleavage resulting in selective O2 reduction to H2O. This allows a synthetic [FeFe]-H2ase model to reduce protons to H2 unabated in the presence of dissolved O2 in water at nearly neutral pH (pH 5.5); i.e., O2-tolerant, stable HER activity is achieved.

Factors Determining the Rate and Selectivity of 4e-/4H+ Electrocatalytic Reduction of Dioxygen by Iron Porphyrin Complexes.

Reactivity as well as selectivity are crucial in the activation and electrocatalytic reduction of molecular oxygen. Recent developments in the understanding of the mechanism of electrocatalytic O2 reduction by iron porphyrin complexes in situ using surface enhanced resonance Raman spectroscopy coupled to rotating disc electrochemistry (SERRS-RDE) in conjunction with H/D isotope effects on electrocatalytic current reveals that the rate of O2 reduction, ∼104 to 105 M-1 s-1 for simple iron porphyrins, is limited by the rate of O-O bond cleavage of an intermediate ferric peroxide species (FeIII-OOH). SERRS-RDE probes the system in operando when it is under steady state such that any intermediate species that has a greater rate of formation relative to its rate of decay, including the rate determining species, would accumulate and can be identified. This technique is particularly well suited to investigate iron porphyrin electrocatalysts as the intense symmetric ligand vibrations allow determination of the oxidation and spin states of the bound iron with high fidelity. The rate of O2 reduction could be tuned up by 3 orders of magnitude by incorporating residues in the catalyst design that can exert "push" or "pull" effects, that is, axial phenolate and thiolate ligands and distal arginine residues. Similarly the rate of O-O bond cleavage can be enhanced by several orders of magnitude upon incorporating a distal Cu site and installing the active site in a hydrophobic protein environment in synthetic models and biosynthetic protein scaffolds. The selectivity, however, is solely determined by the site of protonation of a ferric peroxide (FeIII-OOH) intermediate and can be governed by installing preorganized second sphere residues in the distal pocket. The 4e-/4H+ reduction of O2 entails protonation of the distal oxygen of the FeIII-OOH species, while 2e-/2H+ reduction requires the proximal oxygen to be protonated. Mechanistic investigations of CO2 reduction by iron porphyrins reveal that the rate-determining step is the C-O bond cleavage of a FeII-COOH species analogous to the O-O bond cleavage step of a FeIII-OOH species in O2 reduction. The selectivity, resulting in either CO or HCOOH, is determined by the site of protonation of this species. These similarities suggests that the chemical principles governing the rate and selectivity of reduction of small molecules like O2, CO2, NOx, and SOx may be quite similar in nature.

Activation of Co(I) State in a Cobalt-Dithiolato Catalyst for Selective and Efficient CO2 Reduction to CO.

Reduction of CO2 holds the key to solving two major challenges taunting the society-clean energy and clean environment. There is an urgent need for the development of efficient non-noble metal-based catalysts that can reduce CO2 selectively and efficiently. Unfortunately, activation and reduction of CO2 can only be achieved by highly reduced metal centers jeopardizing the energy efficiency of the process. A carbon monoxide dehydrogenase inspired Co complex bearing a dithiolato ligand can reduce CO2, in wet acetonitrile, to CO with ∼95% selectivity over a wide potential range and 1559 s-1 rate with a remarkably low overpotential of 70 mV. Unlike most of the transition-metal-based systems that require reduction of the metal to its formal zerovalent state for CO2 reduction, this catalyst can reduce CO2 in its formal +1 state making it substantially more energy efficient than any system known to show similar reactivity. While covalent donation from one thiolate increases electron density at the Co(I) center enabling it to activate CO2, protonation of the bound thiolate, in the presence of H2O as a proton source, plays a crucial role in lowering overpotential (thermodynamics) and ensuring facile proton transfer to the bound CO2 ensuring facile (kinetics) reactivity. A very covalent Co(III)-C bond in a Co(III)-COOH intermediate is at the heart of selective protonation of the oxygen atoms to result in CO as the exclusive product of the reduction.

Activating Fe(I) Porphyrins for the Hydrogen Evolution Reaction Using Second-Sphere Proton Transfer Residues.

Iron porphyrin complexes with second-sphere distal triazole residues show a hydrogen evolution reaction (HER) catalyzed by the Fe(I) state in both organic and aqueous media, whereas an analogous iron porphyrin complex without the distal residues catalyzes the HER in the formal Fe(0) state. This activation of the Fe(I) state by the second-sphere residues lowers the overpotential of the HER by these iron porphyrin complexes by 50%. Experimental data and theoretical calculations indicate that the distal triazole residues, once protonated, enhance the proton affinity of the iron center via formation of a dihydrogen bond with an Fe(III)-H- intermediate.

Density functional theory calculations on the active site of biotin synthase: mechanism of S transfer from the Fe(2)S(2) cluster and the role of 1st and 2nd sphere residues.

Density functional theory (DFT) calculations are performed on the active site of biotin synthase (BS) to investigate the sulfur transfer from the Fe(2)S(2) cluster to dethiobiotin (DTB). The active site is modeled to include both the 1st and 2nd sphere residues. Molecular orbital theory considerations and calculation on smaller models indicate that only an S atom (not S²â») transfer from an oxidized Fe(2)S(2) cluster leads to the formation of biotin from the DTB using two adenosyl radicals generated from S-adenosyl-L-methionine. The calculations on larger protein active site model indicate that a 9-monothiobiotin bound reduced cluster should be an intermediate during the S atom insertion from the Fe(2)S(2) cluster consistent with experimental data. The Arg260 bound to Fe1, being a weaker donor than cysteine bound to Fe(2), determines the geometry and the electronic structure of this intermediate. The formation of this intermediate containing the C9-S bond is estimated to have a ΔG(≠) of 17.1 kcal/mol while its decay by the formation of the 2nd C6-S bond is calculated to have a ΔG(≠) of 29.8 kcal/mol, i.e. the 2nd C-S bond formation is calculated to be the rate determining step in the cycle and it leads to the decay of the Fe(2)S(2) cluster. Significant configuration interaction (CI), present in these transition states, helps lower the barrier of these reactions by ~30-25 kcal/mol relative to a hypothetical outer-sphere reaction. The conserved Phe285 residue near the Fe(2)S(2) active site determines the stereo selectivity at the C6 center of this radical coupling reaction. Reaction mechanism of BS investigated using DFT calculations. Strong CI and the Phe285 residue control the kinetic rate and stereochemistry of the product.

Electrocatalytic O2 reduction by [Fe-Fe]-hydrogenase active site models.

The instability of [Fe-Fe]-hydrogenase and its synthetic models under aerobic conditions is an inherent challenge in their development as practical H2 producing electrodes. The electrochemical oxygen reduction reaction of a series of synthetic model complexes of the [Fe-Fe] hydrogenase is investigated, and a dominant role of the bridgehead nitrogen in reducing the amount of partially reduced oxygen species (PROS), which is detrimental to the stability of these complexes, is discovered.

An acetate bound cobalt oxide catalyst for water oxidation: role of monovalent anions and cations in lowering overpotential.

A homogeneous solution of Co(II) in acetate buffer at pH 7 is found to be an efficient water oxidation catalyst (WOC) showing significantly greater current density than Co(II) in phosphate buffer (Co-Pi) under identical conditions owing to the higher solubility of the former. When electrodeposited on ITO/FTO electrodes it forms acetate bound cobalt(II)-oxide materials (Co-Ac-WOC) showing a catalytic current density of 0.1 mA cm(-2) at 830 mV and 1 mA cm(-2) at 1 V in a pH 7 buffer solution. The morphology of Co-Ac-WOC and its evolution with time and deposition potential is investigated with AFM, HR-TEM and SEM. The chemical composition of Co-Ac-WOC is investigated using XPS, EDX, ATR-FTIR and combustion analysis which indicate that this material has a CoO core with chloride and acetate anions bound to the Co center. Sodium is found to be integrated in the Co-Ac-WOC. The presence of the sodium and chloride ions lowers the onset potential for the oxygen evolution reaction (OER) by 240 mV relative to the classic Co-Pi at pH 7. The lower onset potential and higher OER current lowers the exchange current density to 10(-6.7) A cm(-2) in Co-Ac-WOC relative to 10(-8)-10(-10) A cm(-2) in Co-Pi and its derivatives.

Facile electrocatalytic proton reduction by a [Fe-Fe]-hydrogenase bio-inspired synthetic model bearing a terminal CN- ligand.

An azadithiolate bridged CN- bound pentacarbonyl bis-iron complex, mimicking the active site of [Fe-Fe] H2ase is synthesized. The geometric and electronic structure of this complex is elucidated using a combination of EXAFS analysis, infrared and Mössbauer spectroscopy and DFT calculations. The electrochemical investigations show that complex 1 effectively reduces H+ to H2 between pH 0-3 at diffusion-controlled rates (1011 M-1 s-1) i.e. 108 s-1 at pH 3 with an overpotential of 140 mV. Electrochemical analysis and DFT calculations suggests that a CN- ligand increases the pKa of the cluster enabling hydrogen production from its Fe(i)-Fe(0) state at pHs much higher and overpotential much lower than its precursor bis-iron hexacarbonyl model which is active in its Fe(0)-Fe(0) state. The formation of a terminal Fe-H species, evidenced by spectroelectrochemistry in organic solvent, via a rate determining proton coupled electron transfer step and protonation of the adjacent azadithiolate, lowers the kinetic barrier leading to diffusion controlled rates of H2 evolution. The stereo-electronic factors enhance its catalytic rate by 3 order of magnitude relative to a bis-iron hexacarbonyl precursor at the same pH and potential.

Ammonium tetrathiomolybdate: a versatile catalyst for hydrogen evolution reaction from water under ambient and hostile conditions.

The lack of catalysts that can selectively reduce protons to produce hydrogen from water in the presence of oxygen and other conventional inhibitors of hydrogen evolution reaction (HER) has been a fundamental problem stalling the development of a practical hydrogen economy. Ammonium tetrathiomolybdate (ATM), a common laboratory reagent, spontaneously assembles on Au electrodes. Atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy data indicate formation of multiple layers of ATM which are stable over a wide pH range for days. These assemblies can produce hydrogen with very low onset potentials. It shows a turnover rate of 1.4 s(-1) and turnover number >5 × 10(4) in pH 7 at 180 mV overpotential. The pH dependence of the peak potential suggests that the generation of H2 from water proceeds likely via a ligand based proton coupled electron transfer process which precludes inhibition by O2. The ATM functionalized Au electrodes are found to efficiently catalyze HER in saline rich, CO saturated, and sulfide rich water sources with minimal inhibition of catalytic activity.

A bioinspired molybdenum-copper molecular catalyst for CO2 electroreduction.

Non-noble metal molecular catalysts mediating the electrocatalytic reduction of carbon dioxide are still scarce. This work reports the electrochemical reduction of CO2 to formate catalyzed by the bimetallic complex [(bdt)MoVI(O)S2CuICN]2- (bdt = benzenedithiolate), a mimic of the active site of the Mo-Cu carbon monoxide dehydrogenase enzyme (CODH2). Infrared spectroelectrochemical (IR-SEC) studies coupled with density functional theory (DFT) computations revealed that the complex is only a pre-catalyst, the active catalyst being generated upon reduction in the presence of CO2. We found that the two-electron reduction of [(bdt)MoVI(O)S2CuICN]2- triggers the transfer of the oxo moiety to CO2 forming CO3 2- and the complex [(bdt)MoIVS2CuICN]2- and that a further one-electron reduction is needed to generate the active catalyst. Its protonation yields a reactive MoVH hydride intermediate which reacts with CO2 to produce formate. These findings are particularly relevant to the design of catalysts from metal oxo precursors.

H2 evolution catalyzed by a FeFe-hydrogenase synthetic model covalently attached to graphite surfaces.

A synthetic mimic of Fe-Fe hydrogenase (H2ase) is reported which bears a terminal alkyne group in the ligand. Using a terminal azide bearing organic linkers, this complex could be covalently attached to various electrode surfaces (e.g. edge plane graphite, reduced graphene oxide, etc.). The electrocatalytic hydrogen evolution (HER) efficiency of these constructs is investigated and the results show that the EPG-H2ase mimic construct is able to produce H2 from acidic water efficiently with over 90% selectivity.