Thermal and Mechanical Properties of Esterified Lignin in Various Polymer Blends.

Lignin is an abundant polymeric renewable material and thus a promising candidate for incorporation in various commercial thermoplastic polymers. One challenge is to increase the dispersibility of amphiphilic lignin in lipophilic thermoplastic polymers We altered Kraft lignin using widely available and renewable fatty acids, such as oleic acid, yielding more than 8 kg of lignin ester as a light brown powder. SEC showed a molecular weight of 5.8 kDa with a PDI = 3.80, while the Tg of the lignin ester was concluded to 70 °C. Furthermore, the lignin ester was incorporated (20%) into PLA, HDPE, and PP to establish the thermal and mechanical behavior of the blends. DSC and rheological measurements suggest that the lignin ester blends consist of a phase-separated system. The results demonstrate how esterification of lignin allows dispersion in all the evaluated thermoplastic polymers maintaining, to a large extent, the tensile properties of the original material. The impact strength of HDPE and PLA blends show substantial loss upon the addition of the lignin ester. Reconverting the acetic acid side stream into acetic anhydride and reusing the catalyst, the presented methodology can be scaled up to produce a lignin-based substitute to fossil materials.

Sustainable sources need reliable standards.

This review discusses the challenges within the research area of modern biomass fractionation and valorization. The current pulping industry focuses on pulp production and the resulting cellulose fiber. Hemicellulose and lignin are handled as low value streams for process heat and the regeneration of process chemicals. The paper and pulp industry have therefore developed analytical techniques to evaluate the cellulose fiber, while the other fractions are given a low priority. In a strive to also use the hemicellulose and lignin fractions of lignocellulosic biomass, moving towards a biorefining concept, there are severe shortcomings with the current pulping techniques and also in the analysis of the biomass. Lately, new fractionation techniques have emerged which valorize a larger extent of the lignocellulosic biomass. This progress has disclosed the shortcomings in the analysis of mainly the hemicellulose and lignin structure and properties. To move the research field forward, analytical tools for both the raw material, targeting all the wood components, and the generated fractions, as well as standardized methods for evaluating and reporting yields are desired. At the end of this review, a discourse on how such standardizations can be implemented is given.

A New Family of Renewable Thermosets: Kraft Lignin Poly-adipates.

Thermosetting polymeric materials have advantageous properties and are therefore used in numerous applications. In this study, it was hypothesized and ultimately shown that thermosets could be derived from comparably sustainable sub-components. A two-step procedure to produce a thermoset comprising of Kraft lignin (KL) and the cross-linker adipic acid (AdA) was developed. The cross-linking was activated by means of an acetylating agent comprising isopropenyl acetate (IPA) to form a cross-linking mixture (CLM). The cross-linking was confirmed by FTIR and solid-state NMR spectroscopy, and the esterification reactions were further studied using model compounds. When the KL lignin was mixed with the CLM, partial esterification occurred to yield a homogeneous viscous liquid that could easily be poured into a mold, as the first step in the procedure. Without any additions, the mold was heated and the material transformed into a thermoset by reaction of the two carboxylic acid-derivatives of AdA and KL in the second step.

Debottlenecking a Pulp Mill by Producing Biofuels from Black Liquor in Three Steps.

By extracting lignin, pulp production can be increased without heavy investments in a new recovery boiler, the typical bottleneck of a pulp mill. The extraction is performed by using 0.20 and 0.15 weight equivalents of CO2 and H2 SO4 respectively. Herein, we describe lignin esterification with fatty acids using benign reagents to generate a lignin ester mixable with gas oils. The esterification is accomplished by activating the fatty acid and lignin with acetic anhydride which can be regenerated from the acetic acid recycled in this reaction. The resulting mass balance ratio is fatty acid/lignin/acetic acid (2 : 1 : 0.1). This lignin ester can be hydroprocessed to generate hydrocarbons in gasoline, aviation, and diesel range. A 300-hour continuous production of fuel was accomplished. By recirculating reagents from both the esterification step and applying a water gas shift reaction on off-gases from the hydroprocessing, a favorable overall mass balance is realized.

Lignin Valorization by Cobalt-Catalyzed Fractionation of Lignocellulose to Yield Monophenolic Compounds.

Herein, a catalytic reductive fractionation of lignocellulose is presented using a heterogeneous cobalt catalyst and formic acid or formate as a hydrogen donor. The catalytic reductive fractionation of untreated birch wood yields monophenolic compounds in up to 34 wt % yield of total lignin, which corresponds to 76 % of the theoretical maximum yield. Model compound studies revealed that the main role of the cobalt catalyst is to stabilize the reactive intermediates formed during the organosolv pulping by transfer hydrogenation and hydrogenolysis reactions. Additionally, the cobalt catalyst is responsible for depolymerization reactions of lignin fragments through transfer hydrogenolysis reactions, which target the ß-O-4' bond. The catalyst could be recycled three times with only negligible decrease in efficiency, showing the robustness of the system.