RESUMO
We developed a method to better estimate the carbon stocks of in-use harvested wood products (HWP) by using the Eora multiregional input-output tables to link global HWP production and end uses, compared to existing global-scale studies that focused on semifinished HWP. Using the new method, we allocated global HWP to country-specific end uses, including solid HWP used in (1) construction, (2) furniture production, and (3) other end uses, and as (4) household and sanitary paper and (5) other paper and paper products, while the HWP carbon stocks in these end uses were estimated using the Stock Change Approach. We reported that HWP produced globally contained an annual average of 277.7 teragram carbon in 1992-2015, of which 63.0, 12.6, 76.7, 9.1, and 116.3 teragram carbon were consumed by the above five end uses, respectively. By 2015, the carbon stocks of global in-use HWP produced since 1992 accumulated to 2938 teragrams of carbon, of which the above five HWP end uses accounted for 1489, 268, 890, 0, and 291 teragrams of carbon, respectively. Country-specific HWP production and consumption varied significantly, with the eight leading consuming countries (United States, China, Japan, Canada, Germany, Russia, United Kingdom, and France) accounting for 69% of the global in-use HWP carbon stocks.
Assuntos
Carbono , Madeira , Canadá , China , França , Alemanha , Japão , Federação Russa , Reino UnidoRESUMO
The objective of this study is to apply a cradle-to-grave life cycle assessment to a gas-fired instantaneous water heater for domestic uses in order to identify the stages and processes with the largest impacts, as well as to evaluate the influence of different fuels (natural gas and liquefied petroleum gas) and country of use when natural gas is used as fuel. Primary data supplied by a Portuguese manufacturer contributed for achieving accurate life cycle inventory data that were then modelled in SimaPro 8.5.0 complemented with data from Ecoinvent database 3.4. The assessment was performed using the Recipe 2016 Midpoint V1.01â¯at the Hierarchist perspective. The results of the study show that the use stage (mainly owing to water consumption and fuel pre-combustion and combustion) is by far the largest contributor to the environmental burdens, followed by the raw materials production stage. The comparison between the two fuels considered demonstrates that liquefied petroleum gas leads to higher impacts than natural gas, mainly as a result of emissions from its own life cycle. The environmental damage varies noticeably in some impact categories depending on the country where this water heater is used, due to different natural gas origins. Practical implications of this work will enable the manufacturer to identify where to focus on the new water heaters that will be developed to achieve better levels of environment-friendliness.
Assuntos
Gás Natural , ÁguaRESUMO
This article analyzes different forest management strategies to meet the increasing demand of biomass for bioenergy and assesses the resulting global warming implications. Applied to maritime pine forest plantations in Portugal, the assessed strategies are: full harvest of residues (FULL); sustainable and proactive management (SMART); expansion of forest plantations on abandoned farmland (EXP); and biomass import (IMP). A dynamic CO2 inventory was obtained for each scenario using a parametric stand-level C-flux model adapted to Portuguese conditions, which was then extended to the landscape-level and coupled to a dynamic climate model. The time-adjusted absolute global warming potential (AGWP) was then calculated at both stand and landscape levels, considering the timing of all CO2 emissions and uptakes (both fossil and biogenic). To test the robustness of the findings, a sensitivity analysis was performed. Results show that, in a supply-constrained context like Portugal, SMART and EXP management strategies can provide important global warming mitigation benefits (GWPbio < 0), although their supply-response is slow (long-term strategies). On the other hand, FULL and IMP management strategies show moderate to null AGWP reduction potential (0 < GWPbio < 1), while involving other possible risks (e.g., exacerbated soil erosion, nutrient depletion or uncertain impacts abroad), but their supply-response is fast (short-term strategies). National forest regulations and energy policies should be revised to address the drawbacks related to all management strategies and to unleash the multiple environmental benefits they can provide in the short- and long-term.
Assuntos
Florestas , Aquecimento Global , Biomassa , Clima , PortugalRESUMO
The tourism sector after COVID-19 has raised different concerns that have lead to a development towards a more sustainable model of tourism. After the health crisis, the increase in environmental awareness of tourists has become evident. In this context, the great paradigm of 'small-scale' tourism has been developed as opposed to traditional tourism. The present work seeks to contribute to sustainable development in the Spanish tourism sector, comparing a hostel in Cantabria (considered as 'small scale' /religious tourism) and a hotel in Lloret de Mar (considered as a traditional tourism) one using the Life Cycle Assessment (LCA) methodology to verify advantages and disadvantages of both types of tourism. The functional unit (FU) used was 'per guest night with breakfast included'. The results have revealed similar results for both establishments in all impact categories, as can be seen in its contribution to Climate Change (4.41 kg CO2 eq./FU caused by the hotel and 4.78 kg CO2 eq./FU by the hostel). The electricity consumption and the impact of the breakfast in the hostel were identified as main contributors to environmental burdens (with 76.72 % of the hotel's impact to climate change and 77.36 % for the hostel); hence, improvement opportunities envisaged were focused on these critical points. On the one hand, a biomass boiler, a solar water-heating system and a hybrid solar/biomass heating are considered a more sustainable alternatives related to electricity. Natural gas and diesel Consumption, respectively. On the other hand, oatmeal, Greek yoghurt and berries are good options for a breakfast with a reduced environmental impact. It is also important to implement responsible and green practices in order to achieve more environmentally sustainable alternative and traditional accommodations. Therefore, it can be concluded by stating that LCA is a tool capable of identifying and studying the processes with the highest environmental impact in order to find out the most sustainable form of tourism.
Assuntos
COVID-19 , Turismo , Humanos , Dióxido de Carbono , Meio Ambiente , Desenvolvimento SustentávelRESUMO
The tourism industry, affected by COVID-19, must reduce greenhouse gas emissions. This study evaluated the environmental impact of three hotels in coastal and mountainous regions of Spain and Portugal using Life Cycle Assessment (LCA). Data was gathered via surveys in the Greentour tool. Results indicate that the 2-star hotel (focused on cultural-urban tourism) has the highest impacts in most categories, except for CC, FRD, and POF indicators. The 3-star hotel (beach tourism) contributes the most to CC and FRD indicators, while the hostel (nature-religious tourism) has the highest value in the POF indicator. LCA findings reveal that diesel consumption in the hostel and electricity usage in both the 2-star and 3-star hotels are major contributors to environmental impacts across various categories. Overall, evidence suggests that fossil fuel and electricity usage significantly affect tourism activities environmentally. Interestingly, this study highlights that a 2-star hotel can have a higher carbon footprint (CC indicator) compared to a 3-star hotel, challenging the notion that higher star ratings imply lower environmental impact.
RESUMO
Aquaculture plays an essential role in supplying animal-source food and protein worldwide, in this way contributing to several sustainable development goals. Notwithstanding this, the aquaculture sector's long-term environmental sustainability is a major concern due to overall environmental impacts. To date, and to the best of the authors' knowledge, assessments of aquaculture systems in Portugal from an environmental perspective, and the nexus between resource consumption and nutrition issues, are still lacking. This study bridges this gap by analysing an aquaculture system in Portugal in a comprehensive manner by applying and combining life cycle assessment and resources-protein nexus approaches. The overall results highlight feed as the main factor responsible for the total impact in all impact categories selected, ranging from 74 % to 98 %. Climate change impact results in 2.88 kg CO2-eq per kg of medium-size fish (functional unit). The resources-protein nexus shows that 504.1 MJex is needed to obtain 1 kg of edible protein, with a high dependency on non-renewable resources (59 %), mainly oil by-product fuels used in feed production. After identifying environmental hotspots, potential strategies to be adopted such as resource consumption reduction, eco-certification and ecosystem-based management are suggested, in this way ensuring long-term aquaculture production and environmental sustainability.
Assuntos
Bass , Perciformes , Dourada , Animais , Ecossistema , Portugal , Aquicultura/métodos , Estágios do Ciclo de VidaRESUMO
Packaging is essential to protect food, inform consumers, and avoid food waste, yet it can also contribute to the environmental footprint of products. Recycling waste treatment potentially provides more environmental benefits than other options (e.g., landfill), but only 66 % of packaging waste goes to recycling in the European Union. However, the prevention of packaging production with greater reuse, while extending the lifetime or improving packaging design should be firstly encouraged. This highlights the need to assess the willingness of consumers in reducing the environmental impact of seafood products from packaging. An online questionnaire was conducted in three countries (Portugal, Spain, and Ireland), composed of four sections: (i) seafood consumption, (ii) waste separation to be sent recycling, (iii) willingness to purchase seafood products with packaging designed to reduce environmental impact, and (iv) sociodemographic characteristics. Findings revealed that respondents from Spain and Portugal reported a slightly higher frequency of waste sent to recycle compared to Ireland. Irish respondents appear to have more difficulties about the type of plastic materials that can be sent to recycling due to Irish waste management capabilities; whereas Spanish and Portuguese respondents were not fully aware that packaging does not need to be washed prior to recycling. The most popular alternatives to improve the sustainability of seafood packaging were the use of reusable packaging, compostable packaging material, glass jars for canned seafood instead of cans, and intelligent packaging. Most respondents were willing to pay more for seafood products that use more sustainable packaging (62 % for Spain, 68 % for Ireland, 70 % for Portugal) and half of the respondents intimated that they avoid seafood products due to excessive packaging. With more detailed information on the waste management of packaging, seafood consumers could actively contribute with their attitudes where commensurate changes can improve environmental assessment of seafood.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Embalagem de Produtos , Conservação dos Recursos Naturais , Reciclagem , Plásticos , Alimentos MarinhosRESUMO
Indicators from life cycle assessment methodologies (i.e., footprints) have emerged as useful tools for identifying and communicating the environmental impacts of a system thanks to they are accessible and intuitive and easy to understand to non-expert public. However, the focus on a single environmental problem is one of their main drawbacks. From this idea arises the concept of Water-Energy-Food (WEF) nexus, with the aim of raising awareness of the connections between the universal rights to water supply, energy security and food provision. Regarding the latter, the fisheries sector stands out as a fundamental pillar in the fight against malnutrition. In this sense, the European project "blue growth" aims to ensure that the development of the marine sector is not linked to the degradation of its ecosystems. However, although producers and authorities are willing to communicate the sustainability of products, there is still no standard methodology for reporting it. With the purpose of remedying this current situation, this paper aims to provide technical guidance to calculate a single WEF nexus index for ecolabelling seafood products in the European framework (Atlantic area). Therefore, through this, it is expected to create a useful communication channel between producers and consumers through an easy-to-read ecolabel. Nonetheless, certain aspects, such as the footprints selected or the calculation procedures selected have to be reconsidered to refine the methodology proposed, apart from broadening the approach to other food sectors with the aim that the proposed eco-certification can be present in major supply and retail chains.
Assuntos
Ecossistema , Água , Meio Ambiente , Abastecimento de Água , Alimentos MarinhosRESUMO
Tourism has grown steadily in recent decades, becoming a strategic sector for the economy in many countries. However, the environmental impacts associated with tourism have also experienced an upward trend. In this sense, innovation is needed in the tourism sector, to move towards new models and strategies that integrate environmental sustainability with the social aspects of the sector. In this study, a holistic assessment of the environmental impact of tourism has been carried out using the Life Cycle Assessment (LCA) method, considering all stages of tourism activity: transportation from the place of origin to destination and back, accommodation, catering, and activities conducted. For this purpose, a case study has been carried out based on a typical trip made from Madrid to Rías Baixas (Galicia), considering a four-night stay and the performance of two activities (music festival and cultural museum) at the destination. Two alternative transportation scenarios (train or plane) have been defined to analyze the influence of the type of transportation on the overall impact. Other touristic activities such as visiting gardens or thermal baths instead of visiting a cultural museum or attending a music festival have been analyzed and it has been found that the thermal baths and the museum have the greatest environmental impacts. Transportation was the biggest contributor to most of the environmental impacts in the selected categories. On the other hand, the stay at the destination has stood out due to the impact of the consumption of food and energy used at the accommodation facility. The impact of the activities conducted at the destination is also worth highlighting. Finally, alternative scenarios for transportation have shown that the mode of transportation selected is key for lowering the overall environmental impact of the stay at the destination, highlighting the public transportation alternative, such as the train, as the most environmentally friendly option.
Assuntos
Férias e Feriados , Turismo , Alimentos , Jardinagem , Humanos , EspanhaRESUMO
BACKGROUND: Public hospital managers in Rio de Janeiro must deal with severe budget costs, which is the only source of income of public hospitals. In this sense, systematic supply chain risk management can contribute to identifying such risks, assessing their severity, and developing mitigating plans, or even revealing the lack of such plans. Private hospital networks must also map their risks since they are facing a diminishing of demand given that unemployment in Brazil, which is growing in the past years, generates an impossibility of affording private healthcare. OBJECTIVE: The purpose of this paper is to investigate how supply chain risk management is being applied in healthcare supply chains from Rio de Janeiro - Brazil. This study considers supply chains located in the state of Rio de Janeiro. To accomplish this objective, we provide answers to two Research Questions: RQ1 - Is SCRM known as a concept among Rio de Janeiro healthcare supply chains? RQ2 - How are risk identification, risk assessment, and risk mitigation being implemented by companies from the healthcare supply chains in Rio de Janeiro - Brazil? METHOD: Our research design is based on four steps: i) Research design; ii) Case selection: iii) Data collection (11 cases selected); iv) Data analysis. RESULTS: The interviews revealed that SCRM is an entirely unknown concept among healthcare supply chains from Rio de Janeiro - Brazil. Managers have empirical knowledge of the risks, and they can identify the most hazardous risks and can come up with solutions to mitigate them, nevertheless, in many situations they do not have the authority or the manpower to implement the solutions, at most, managers implement local risk mitigation initiatives that do not consider the supply chains broader context. CONCLUSION: The healthcare organizations studied by this paper do not apply SCRM. They only apply local isolated solutions not considering a supply chain scope. This can become hazardous since isolated risk mitigation initiatives are often innocuous and have the potential to generate other risks.
Assuntos
Atenção à Saúde , Equipamentos e Provisões Hospitalares , Setor de Assistência à Saúde , Hospitais Públicos , Gestão de Riscos , Brasil , Custos e Análise de Custo , Atenção à Saúde/economia , Equipamentos e Provisões Hospitalares/economia , Equipamentos e Provisões Hospitalares/provisão & distribuição , Setor de Assistência à Saúde/economia , Hospitais Públicos/economia , Hospitais Públicos/provisão & distribuição , Humanos , Gestão de Riscos/economiaRESUMO
Biomass plays a fundamental role in numerous decarbonisation strategies that seek to mitigate the short- and long-term effects of climate change. Within this context, decision-makers' choices need to comprehensively consider potential sustainability effects associated with bioenergy systems. In particular, due to the lack of studies addressing the social sustainability of bioelectricity, the present work applies the Social Life Cycle Assessment (S-LCA) methodology to compare the social performance of two biomass-to-electricity systems located in Portugal based on either fluidised-bed or grate furnace technology. S-LCA involves a comprehensive approach for holistic evaluation and data interpretation of social aspects. Six social indicators were benchmarked: child labour, forced labour, gender wage gap, women in the sectoral labour force, health expenditure, and contribution to economic development. The results show that the implementation of fluidised-bed furnaces as a more efficient conversion technology could reduce by 15-19% the selected negative social impacts, except women in the sectoral labour force. When enlarging the interpretation to a sustainability perspective, the general suitability of the fluidised-bed furnace system would be further emphasised under environmental aspects while jointly providing valuable insights for informed decision-making and sustainability reporting.
Assuntos
Mudança Climática , Eletricidade , Animais , Biomassa , Criança , Humanos , Estágios do Ciclo de Vida , PortugalRESUMO
Currently, most of the greenhouse gas (GHG) emissions are attributed to cities, as they are the global centers of business, residential and cultural activity, cities are expected to play a leading role in proposing climate change mitigation actions. To do so, it is important to have tools that allow the carbon footprint of cities to be assessed as accurately as possible. This study aims to quantify the carbon footprint (CF) associated with the activities developed in a Spanish city (Cadiz, Southwest Spain) by means of two available environmental methodologies, namely Environmentally Extended Input-Output Analysis (EEIOA) and Life Cycle assessment (LCA). When EEIOA is considered, two downscaling factors were proposed for the analysis due to the nature of the data handled (monetary data), based on the incomes (DF1) and expenditures (DF2) per inhabitant at city level. Regarding LCA, the rates of consumption of goods and production of waste per inhabitant have been processed to estimate the CF. The CF scores identified were 5.25 and 3.83 tCO2-eq·inhabitant-1·year-1 for DF1 and DF2 respectively, according to EEIOA, and 5.43 tCO2-eq·inhabitant-1·year-1, considering LCA. Therefore, a similarity can be concluded between the results obtained with both methodologies despite the inherent differences. Considering the results, the downscaling procedure based on income per inhabitant should be preferred, pointing to EEIOA as a good alternative to LCA for evaluating the CF at city level, requiring less time and effort. In contrast, EEIOA reports more limitations when critical flows were identified, which LCA can solve. Finally, this study can be of great interest to policy makers and city governments to know the CF and the main flows that contribute and in this way, can develop new policies and city models for reducing GHG emission new policies and city models for reducing GHG emission and addressing climate change.
RESUMO
Life cycle assessment (LCA) has been widely applied in many different sectors, but the marine products and seafood segment have received relatively little attention in the past. In recent decades, global fish production experienced sustained growth and peaked at about 179 million tonnes in 2018. Consequently, increased interest in the environmental implications of fishery products along the supply chain, namely from capture to end of life, was recently experienced by society, industry and policy-makers. This timely review aims to describe the current framework of LCA and its application to the seafood sector that mainly focused on fish extraction and processing, but it also encompassed the remaining stages. An excess of 60 studies conducted over the last decade, along with some additional publications, were comprehensively reviewed; these focused on the main LCA methodological choices, including but not limited to, functional unit, system boundaries allocation methods and environmental indicators. The review identifies key recommendations on the progression of LCA for this increasingly important sustaining seafood sector. Specifically, these recommendations include (i) the need for specific indicators for fish-related activities, (ii) the target species and their geographical origin, (iii) knowledge and technology transfer and, (iv) the application and implementation of key recommendations from LCA research that will improve the accuracy of LCA models in this sector. Furthermore, the review comprises a section addressing previous and current challenges of the seafood sector. Wastewater treatment, ghost fishing or climate change, are also the objects of discussion together with advocating support for the water-energy-food nexus as a valuable tool to minimize environmental negativities and to frame successful synergies.
Assuntos
Mudança Climática , Alimentos Marinhos , Animais , Estágios do Ciclo de VidaRESUMO
BACKGROUND: Recent studies concerning supply chain management have shown that topics such as supply chain risk management (SCRM) and supply chain resilience (SCRes) are the new trends in supply chain management. Initial studies in the early 2000s developed frameworks to identify, measure and mitigate risks and assess/evaluate the degree of resilience of a company or supply chain. Recently, a large variety of studies has emerged, including more conceptual and review studies as well as more sophisticated, quantitative studies. However, studies on human-related factors are still lacking, and there is no systematic method to answer questions such as "What literature is available concerning human factors related to SCRM and SCRes?", "Which human factors contribute to SCRes?" and "Which human factor can amplify SC Risks?" OBJECTIVE: The main goal of this paper is to conduct a systematic literature review to identify human factors that impact supply chain resilience and supply chain risk management. METHOD: This study was performed using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method. The objective of using this review protocol is to ensure that the review has the minimum amount of bias due to research expectations. RESULTS: This study highlighted a summary of human-related risk and resilience factors as well as a discussion about these preliminary findings. CONCLUSIONS: As our main conclusion, we highlight that human factors may generate significant risks in the supply chain, nevertheless, there are other human factors that must be nourished to obtain SCRes.
Assuntos
Motivação , Projetos de Pesquisa , Humanos , Gestão de RiscosRESUMO
Recently, wood pellets have become a reliable and clean renewable fuel for residential heating, replacing fossil fuels and reducing greenhouse gas emissions. Wood pellets are normally produced in industrial pellet plants (centralised production), but decentralised small-scale local production also occurs. This study applies Life Cycle Assessment (LCA) to quantify and compare the environmental profile of one centralised and two decentralised alternatives for wood pellet production for residential heating in Portugal: (1) industrial wood pellets production (centralised), (2) wood pellets production at sawmills (decentralised) and (3) wood pellets production at households (decentralised). System boundaries include the stages of forest management, wood pellet production, wood pellet distribution and wood pellet energetic conversion. The impact results show that industrial pellet production ranks as the worst alternative, while pellet production at households has the best environmental profile for all the impact categories under study. However, the environmental impacts of pellet production at the sawmill do not differ greatly from those of the pellet production at households; they are 14 to 16% higher for global warming and fossil resources scarcity and 0.3 to 3% higher for the remaining impact categories. The worst environmental performance of the industrial pellet production alternative is mainly due to high electricity and diesel consumption during wood pellet production and the use of logging residues to generate heat for drying biomass feedstock. A sensitivity analysis was performed to evaluate the influence of changing the distance travelled during the transport of packed pellets to stores and sawdust to households. The results show changes in the environmental performance ranking, highlighting that for short distances, both decentralised alternatives can be more sustainable from an environmental perspective than the centralised alternative, but for larger distances, the pellet production at households should be avoided.
RESUMO
The increasing use of forest biomass as a fuel for power plants due to environmental concerns will certainly increase the amount of woody biomass ash produced. Because of the environmental problems derived from woody biomass ash disposal, an important aspect for the sustainable development of the energy sector is the implementation of effective ash management strategies. The purpose of this study is to assess the environmental impacts of woody biomass ash landfarming for soil amelioration through a Life Cycle Assessment. The baseline scenario corresponds to the current most common practice of woody biomass ash management (landfilling), and two different landfarming alternatives were assessed: liming and fertilisation. Credits were given to the system due to the substitution of three traditional liming products and five traditional fertilisers. Woody biomass ash landfarming presented satisfactory performance in five impact categories under study in comparison to landfilling. When woody biomass ash was used for liming, the environmental savings were more pronounced when substituting hydrated lime. For potassium supply, the substitution of potassium nitrate by woody biomass ash presented the best environmental performance, while for phosphorus supply, the environmental savings were more pronounced substituting single superphosphate. However, in four impact categories, the environmental impacts of ash landfarming exceeded the impacts of ash landfilling, due to the emission to soil of nutrients and trace elements to soil. But this does not necessarily imply increased risks for the environment, as the potential pollutants leaching depends on their bioavailability in the soil.
Assuntos
Poluentes do Solo , Oligoelementos , Biomassa , Cinza de Carvão , Fertilizantes , Florestas , SoloRESUMO
Wood-fuelled systems are commonly used all over the world for residential heating, and recently wood pellets have been replacing traditional firewood. This article presents an environmental life cycle assessment of five wood-based combustion systems for residential heating: i) a pellet stove using maritime pine pellets; a wood stove using ii) eucalyptus (Eucalyptus globulus Labill.) and iii) maritime pine (Pinus pinaster Ait.) split logs; and a fireplace using iv) eucalyptus and v) maritime pine split logs. The functional unit is 1â¯MJ of thermal energy for residential heating. System boundaries include four stages: (1) forest management; (2) pellet and wood split log production; (3) distribution; and (4) thermal energy generation. Environmental impacts were calculated for seven impact categories from the ReCiPe 2016 midpoint method, and a sensitivity analysis was performed using the Product Environmental Footprint (PEF) life cycle impact assessment method and modifying the distances travelled. Of the five heating systems analysed, the fireplace presents the worst performance for all the impact categories with the exception of freshwater eutrophication and marine eutrophication, when maritime pine split logs are burned in the fireplace. Comparing the pellet stove with the wood stove, neither system is better for all the impact categories analysed. Regarding sensitivity analysis, the use of an alternative characterisation method leads to similar trends in the results in comparison with those obtained from the ReCiPe method, while changes in transport distances do not affect the total impacts to a large extent.
RESUMO
The development of methods to assess the potential environmental impact of green water consumption in life cycle assessment has lagged behind those for blue water use, which are now routinely applied in industrial and policy-related studies. This represents a critical gap in the assessment of land-based production systems and the ability to inform policy related to the bio-economy. Combining satellite remote sensing and meteorological data sets, this study develops two new sets of spatially-differentiated and globally applicable characterisation factors (CFs) to assess the environmental impact of green water flows in LCA. One set of CFs addresses the impact of shifts in water vapour flow by evapotranspiration on blue water availability (CFWS) and the other set of CFs addresses moisture recycling within a basin (CFWA). Furthermore, as an additional and optional step, these two indicators are combined into an aggregated green water scarcity indicator, representing the global variability of green water scarcity. The values obtained for CFWA show that there are significant changes in green water flows that were returned to the atmosphere in Alaska (covered by open shrublands) and in some central regions of China (covered by grasslands and barren or sparsely vegetated land), where precipitation levels are lower than 10 mm/yr. The results obtained for CFWS indicate that severe perturbations in surface blue water production occur, particularly in central regions of China (covered by grasslands), the southeast of Australia (covered by evergreen broadleaf forest) and in some central regions of the USA (covered by grassland and evergreen needleleaf forest). The application of the green water scarcity CFs enables the evaluation of the potential environmental impact due to green water consumption by agricultural and forestry products, informing both technical and non-technical audiences and decision-makers for the purpose of strategic planning of land use and to identify green water protection measures.
RESUMO
In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved.
RESUMO
An important aspect of sustainable development is the implementation of effective and sustainable waste management strategies. The present study focuses on a Life Cycle Assessment (LCA) approach to different waste management strategies for natural cork stoppers, namely incineration at a municipal solid waste incinerator, landfilling in a sanitary landfill, and recycling. In the literature, there are no LCA studies analyzing in detail the end-of-life stage of natural cork stoppers as well as other cork products. In addition, cork is usually treated as wood at the end-of-life stage. Thus, the outcome of this study can provide an important insight into this matter. The results showed that different management alternatives, namely incineration and recycling, could be chosen depending on the impact category considered. The former alternative presented the best environmental results in the impact categories of climate change, ozone depletion and acidification, while the latter for photochemical ozone formation and mineral and fossil resource depletion. The landfilling alternative did not present the best environmental performance in any of the impact categories. However, when the biogenic carbon dioxide emission was assessed for the climate change category, the landfilling alternative was found to be the most effective since most of the biogenic carbon would be permanently stored in the cork products and not emitted into the atmosphere. A sensitivity analysis was performed and the results showed that there are various parameters that can significantly influence the results (e.g., carbon content in cork and decay rate of cork in the landfill). Thus, LCA studies should include a detailed description concerning their assumptions when the end-of-life stage is included in the boundaries since they can influence the results, and furthermore, to facilitate the comparison of different end-of-life scenarios. The present study and the obtained results could be useful for the decision-making process concerning public solid waste policies and industrial strategies.