RESUMO
In living systems, protein assemblies have essential functions, serving as structural supports, transport highways for molecular cargo, and containers of genetic material. The construction of protein assemblies, which involves control over space and time, remains a significant challenge in biotechnology. Here, we show that anionic boron clusters, 3,3'-commo-bis[closo-1,2-dicarba-3-cobaltadodecaborane] (COSAN-), and halogenated closo-dodecarboranes (B12X122-, X = Η, Cl or I), described as super-chaotropic nano-ions, induce the formation of 2D assemblies of model proteins, myoglobin, carbonic anhydrase, and trypsin inhibitor. We found that the nano-ion concentration reversibly controls the size of the protein assemblies. Furthermore, the secondary structures of the proteins are only slightly affected by assembly formation. For myoglobin, the formation of these assemblies even prevents temperature denaturation, highlighting a preservation effect of nano-ions. Our study reveals that inorganic boron-based nano-ions act as a reversible molecular glue for proteins, providing a potential starting point for the further development of controlled protein assemblies.
RESUMO
Understanding clay flotation mechanisms has become a major concern because of the increasing level of environmental contamination of soil and ground water by heavy metals and radionuclides. Clays are often used as sorbents for extracting metals in indirect flotation processes but can function simultaneously as defoamers. However, how foam generation and stability depend on the molecular interactions between the clays and surfactant is still controversial. In the present study, an amine polyethoxylated surfactant was used as a bifunctional surfactant that collected clay particles and acted as a foaming agent in the flotation process. The pH conditions strongly affected the surfactant physicochemical properties, allowing the clay extraction efficiency to be tuned. The interfacial recovery factor of the clays almost reached 100% under acidic (pH < 6) and neutral (pH 6-10) conditions, whereas it was negative under alkaline conditions (pH > 10), contrary to expectations. To elucidate the mechanisms involved in the particle flotation process for each of the pH conditions, the bulk and foam phases were analyzed. The effects of electrostatic interactions between the solutes and multiscale structure on the clay extraction behavior were investigated by electrophoretic measurements, dynamic light scattering, small-angle neutron scattering, and image analysis. Based on these results, three flotation processes were found depending on pH range: surfactant foam fractionation at pH > 10; clay particle foam flotation at pH 6-10; and particle froth flotation at pH < 6.
RESUMO
The size and shape of a water-soluble hexanuclear plutonium cluster were probed by combining synchrotron small-angle X-ray scattering (SAXS) and extended X-ray absorption fine structure (EXAFS). A specific setup coupling both techniques and dedicated to radioactive samples on the MARS beamline endstation at Synchrotron SOLEIL is described. The plutonium hexanuclear cores are well stabilized by the 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid ligands and this allows a good evaluation of the setup to probe the very small plutonium core. The results show that, in spite of the constrained conditions required to avoid any risk of sample dispersion, the flux and the sample environment are optimized to obtain a very good signal-to-noise ratio, allowing the detection of small plutonium aggregates in an aqueous phase. The structure of the well defined hexanuclear cluster has been confirmed by EXAFS measurements in solution and correlated with SAXS data processing and modelling. An iterative comparison of classical fit models (Guinier or sphere form factor) with the experimental results allowed a better interpretation of the SAXS signal that will be relevant for future work under environmentally relevant conditions.
Assuntos
Plutônio , Síncrotrons , Espalhamento a Baixo Ângulo , Água , Difração de Raios XRESUMO
Liquid foams are multi-scale structures whose structural characterization requires the combination of very different techniques. This inherently complex task is made more difficult by the fact that foams are also intrinsically unstable systems and that their properties are highly dependent on the production protocol and sample container. To tackle these issues, a new device has been developed that enables the simultaneous time-resolved investigation of foams by small-angle neutron scattering (SANS), electrical conductivity, and bubbles imaging. This device allows the characterization of the foam and its aging from nanometer up to centimeter scale in a single experiment. A specific SANS model was developed to quantitatively adjust the scattering intensity from the dry foam. Structural features such as the liquid fraction, specific surface area of the Plateau borders and inter-bubble films, and thin film thickness were deduced from this analysis, and some of these values were compared with values extracted from the other applied techniques. This approach has been applied to a surfactant-stabilized liquid foam under free drainage and the underlying foam destabilization mechanisms were discussed with unprecedented detail. For example, the information extracted from the image analysis and SANS data allows for the first time to determine the disjoining pressure vs. thickness isotherm in a real, draining foam.
RESUMO
Second Harmonic Generation (SHG) today represents one of the most powerful techniques to selectively probe all types of interfaces. However, the origin of the SHG signal at a molecular level is still debated since the local dipole contribution, which is strongly correlated to the molecular orientation can be counterbalanced by non-local quadrupole contributions. Here, we propose a method to simulate the SHG signal of a model water/air interface from the molecular response of each contribution. This method includes both local and non-local terms, which are represented, respectively, by the dependency of the polarisability and hyperpolarisability upon the chemical environment of the molecule and by the bulk quadrupole response. The importance of both terms for the sound simulation of the SHG signals and their interpretation is assessed. We demonstrate that the sole dipole term is unable to simulate a SHG signal, even if the dependency of the hyperpolarisability on the local environment is considered. The inclusion of the bulk quadrupole contribution, which largely dominates the dipole contribution, is essential to predict the SHG response, although the accuracy of the prediction is increased when the dependency upon the local environment is considered.
RESUMO
Metalla-bis-dicarbollides, such as the cobalta-bis-dicarbollide (COSAN) anion [Co(C2 B9 H11 )2 ]- , have attracted much attention in biology but a deep understanding of their interactions with cell components is still missing. For this purpose, we studied the interactions of COSAN with the glucose moiety, which is ubiquitous at biological interfaces. Octyl-glucopyranoside surfactant (C8G1) was chosen as a model as it self-assembles in water and creates a hydrated glucose-covered interface. At low COSAN content and below the critical micellar concentration (CMC) of C8G1, COSAN binds to C8G1 monomers through the hydrophobic effect. Above the CMC of C8G1, COSAN adsorbs onto C8G1 micelles through the superchaotropic effect. At high COSAN concentrations, COSAN disrupts C8G1 micelles and the assemblies become similar to COSAN micelles but with a small amount of solubilized C8G1. Therefore, COSAN binds in a versatile way to C8G1 through either the hydrophobic or superchaotropic effect depending on their relative concentrations.
RESUMO
Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent-mediated effect named superchaotropicity. We show here that nano-ions at low concentrations (µm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non-ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano-ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano-ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.
RESUMO
We show here for the first time that short chain poly( N-isopropylacrylamide) (PNIPAM), one of the most famous thermoresponsive polymers, self-assembles in water to form (i) discrete nanometer-globules and (ii) micrometric sheets with nm-thickness upon addition of the well-known Keggin-type polyoxometalate (POM) H3PW12O40 (PW). The type of self-assembly is controlled by PW concentration: at low PW concentrations, PW adsorbs on PNIPAM chains to form globules consisting of homogeneously distributed PWs in PNIPAM droplets of several nm in size. Upon further addition of PW, a phase transition from globules to micrometric sheets is observed for PNIPAMs above a polymer critical chain length, between 18 and 44 repeating units. The thickness of the sheets is controlled by the PNIPAM chain length, here from 44 to 88 repeating units. The PNIPAM sheets are electrostatically stabilized PWs accumulated on each side of the sheets. The shortest PNIPAM chain with 18 repeating units produces PNIPAM/PW globules with 5-20 nm size but no sheets. The PW/PNIPAM self-assembly arises from a solvent mediated mechanism associated with the partial dehydration of PW and of the PNIPAM, which is related to the general propensity of POMs to adsorb on neutral hydrated surfaces. This effect, known as superchaotropy, is further highlighted by the significant increase in the lower critical solubilization temperature (LCST) of PNIPAM observed upon the addition of PW in the mM range. The influence of the POM nature on the self-assembly of PNIPAM was also investigated by using H4SiW12O40 (SiW) and H3PMo12O40 (PMo), i.e. changing the POM's charge density or polarizability in order to get deeper understanding on the role of electrostatics and polarizability in the PNIPAM self-assembly process. We show here that the superchaotropic behavior of POMs with PNIPAM polymers enables the formation and the shape control of supramolecular organic-inorganic hybrids.
RESUMO
Understanding the fundamentals of confined chemical reaction was an important subject in various heterogeneous physicochemical processes. Here, we investigated the orientation behavior of an amphiphilic ligand, the tri- n-octylphosphine oxide (TOPO), in a compressed monolayer at the air/water interface and its impact on the complexation reactivity of TOPO molecules with chromate ions at the interface. The analysis of sum frequency generation and polarization modulation infrared reflection absorption spectroscopy experiments combined with surface pressure measurements reveals a significant dependence of the adsorption rate and saturated concentration of chromate ions on the orientation of TOPO molecules during the increase of the surface pressure. In parallel, the analysis of molecular dynamics simulations indicates that the interaction energy between TOPO molecules and chromate ions is strongly sensitive to the orientation of TOPO molecules confined at the water/air interface. The present work provides a novel insight into the unique chemical reactivity of molecules in a confined microenvironment, and it provides a basis for further progresses in improving chemical reactivity and selectivity of molecules in a confined environment by regulating confinement of molecules.
RESUMO
Ternary solutions containing one hydrotrope (such as ethanol) and two immiscible fluids, both being soluble in the hydrotrope at any proportion, show unexpected solubilization power and allow strange but yet unexplained membrane enzyme activity. We study the system ethanol-water-octanol as a simple model of such kinds of ternary solutions. The stability of "detergentless" micelles or microemulsions in such mixtures was proposed in the pioneering works of Barden and coworkers [Smith GD, Donelan CE, Barden RE (1977)J Colloid Interface Sci60(3):488-496 and Keiser BA, Varie D, Barden RE, Holt SL (1979)J Phys Chem83(10):1276-1281] in the 1970s and then, neglected, because no general explanation for the observations was available. Recent direct microstructural evidence by light, X-ray, and neutron scattering using contrast variation reopened the debate. We propose here a general principle for solubilization without conventional surfactants: the balance between hydration force and entropy. This balance explains the stability of microemulsions in homogeneous ternary mixtures based on cosolvents.
RESUMO
Owing to their multiple charges and their nanometric size, polyoxometalates (POMs) are at the frontier between ions and charged colloids. We investigated here the effect of POM-POM electrostatics repulsions on their self-diffusion in water by varying POM and supporting salt concentrations. The self-diffusion coefficients of two Keggin's POMs [silicotungstate (SiW12O404-) and phosphotungstate (PW12O403-)] were determined by dynamic light scattering (DLS) and 1H/31P DOSY NMR, whereas POM-POM electrostatic repulsions were investigated by the determination of the static structure factors using small-angle X-ray scattering (SAXS). The self-diffusion coefficients for the two POMs and for different POM/background salt concentrations were collected in a master curve by comparing the averaged POM-POM distance in solution to the Debye length. As for classical charged colloids, we show that the POM's counterions should not be considered in the calculation of the ionic strength that governs POM-POM electrostatic repulsions. This result was confirmed by fitting the POM-POM structure factor by considering a pair potential of spherical charged particles using the well-known Hayter mean spherical approximation (MSA). These Keggin POMs also behave as (super)chaotropic anions (i.e., they have a strong propensity to adsorb on (neutral polar) surfaces, which was also investigated) here on the surface of octyl-ß-glucoside (C8G1) micelles. The variations of (i) the chemical shift of 1H/31P NMR signals and (ii) the self-diffusion coefficients obtained by DOSY 1H/31P NMR of PW3- and of C8G1 were in good agreement, confirming the strong adsorption of POMs on the micelle polar surface from static and dynamic points of view. We concluded that Keggin's POMs behave (i) as anions because they adsorb on surfaces as chaotropic anions and (ii) as colloids because they can be described by a classical colloidal approach by dynamic and static scattering techniques (i.e., by the investigation of their interparticle electrostatic structure factor and self-diffusion without considering the POM's counterions in the ionic strength calculation). This work highlights the dynamic properties of POMs at soft interfaces compared to bulk aqueous solution, which is essential in the understanding of functional properties of POMs, such as (photo)catalysis and the rational design of POM-based hybrid nanomaterials from soft templating routes (i.e., in aqueous solutions at room temperature).
RESUMO
The complex structure of a plutonium uranium refining by extraction (PUREX) process organic phase was characterized by combining results from experiments and molecular dynamics simulations. For the first time, the molecular interactions between tri-n-butyl phosphate (TBP) and the extracted solutes, as well as TBP aggregation after the extraction of water and/or uranyl nitrate, were described and analyzed concomitantly. Coupling molecular dynamics simulations with small- and wide-angle X-ray scattering (SWAXS) experiments can lead to simulated organic solutions that are representative of the experimental ones, even for high extractant and solute concentrations. Furthermore, this coupling is well adapted for the interpretation of SWAXS experiments without preliminary hypothesis on the size or shape of aggregates. The results link together previous literature studies obtained for each level of depiction separately (complexation or aggregation). Without uranium, or at low metal concentration, almost no aggregation was observed. At high uranium concentration, organic phases contain small [UO2 (NO3 )2 (TBP)2 ]n polymetallic aggregates (with n=2 to 4), in which the 1:2 U/TBP stoichiometry is preserved.
RESUMO
In the last decade organic-inorganic hybrid materials have become essential in materials science as they combine properties of both building blocks. Nowadays the main routes for their synthesis involve electrostatic coupling, covalent grafting, and/or solvent effects. In this field, polyoxometalates (POMs) have emerged as interesting inorganic functional building blocks due to their outstanding properties. In the present work the well-known α-Keggin polyoxometalate, α-PW12 O403- (PW), is shown to form hybrid crystalline materials with industrial (neutral) polyethylene glycol oligomers (PEG) under mild conditions, that is, in aqueous medium and at room temperature. The formation of these materials originates from the spontaneous self-assembly of PW with EOx , (EO=ethylene oxide) with at least four EO units (x>4). The PW-PEG nanoassemblies, made of a POM surrounded by about two PEG oligomers, are stabilized by electrostatic repulsions between the negatively charged PW anions. Addition of NaCl, aimed at screening the inter-nanoassembly repulsions, induces aggregation and formation of hybrid crystalline materials. Single-crystal analysis showed a high selectivity of PW towards EO5 -EO6 oligomers from PEG200, which is made of a mixture of EO3-8 . Therefore, a general "soft" route to produce POM-organic composites is proposed here through the control of electrostatic repulsions between spontaneously formed nanoassemblies in water. However, this rational design of new POM hybrid (crystalline) materials with hydrophilic blocks, using such a simple mixing procedure of the components, requires a deep understanding of the molecular interactions.
RESUMO
Three different liquid interfaces, water/air, thiophene/air, and water/thiophene, were probed using the second harmonic generation (SHG) technique. Thiophene and water have been chosen because the hyperpolarizability of these molecules has already been measured or calculated and the different values can be found in literature. We have studied the microscopic structure of these interfaces by comparing the components of the second order susceptibility tensor determined from the SHG polarization curve analysis with those determined via a molecular dynamics (MD) simulation of these interfaces. We have indeed computed the structure and orientation of water and thiophene molecules at the liquid/air and liquid/liquid (L/L) interfaces as a function of the distance from the interface. The integrated susceptibility values calculated by MD simulations agree well with SHG results and validate the choice of force fields that should permit to quantify more complex L/L interfaces.
RESUMO
Tuning the affinity of a medium for a given metallic cation with the sole modification of weak interactions is a challenge for molecular recognition. Solvent extraction is a key technique employed in the recovery and purification of valuable metals, and it is facing an increased complexity of metal fluxes to deal with. The selectivity of such processes generally relies on the use of specific ligands, designed after their coordination chemistry. In the present study, we illustrate the possibility to employ the sole control of weak interactions to achieve the selective extraction of Pd(II) over Nd(III) : the control over selectivity is obtained by tuning the self-assembly of the organic phase. A model is proposed, after detailed experimental analysis of molecular (XRD, NMR) and supra-molecular (SAXS) features of the organic phases. We thus demonstrate that Pd(II) extraction is driven by metal coordination, whereas Nd(III) extraction requires aggregation of the extractant in addition to metal coordination. These results are of general interest for the applications which rely on the stabilization of metals in organic phases.
RESUMO
The interface between two fluids is never flat at the nanoscale, and this is important for transport across interfaces. In the absence of any external field, the surface roughness is due to thermally excited capillary waves possessing subnanometric amplitudes in the case of simple liquids. Here, we investigate the effect of ultrasound on the surface roughness of liquid-gas and liquid-liquid interfaces. Megahertz (MHz) frequency ultrasound was applied normal to the interface at relatively low ultrasonic pressures (<0.6 MPa), and the amplitudes of surface fluctuations have been measured by light reflectivity and ellipsometry. We found a dramatic enhancement of surface roughness, roughly linear with intensity, with vertical displacements of the interface as high as 50-100 nm. As a consequence, the effective contact area between two fluids can be increased by ultrasound. This result has a clear impact for enhancing interface based processes such as mass or heat transfer.
RESUMO
Knowledge of the (supra)molecular structure of an interface that contains amphiphilic ligand molecules is necessary for a full understanding of ion transfer during solvent extraction. Even if molecular dynamics already yield some insight in the molecular configurations in solution, hardly any experimental data giving access to distributions of both extractant molecules and ions at the liquid-liquid interface exist. Here, the combined application of X-ray and neutron reflectivity measurements represents a key milestone in the deduction of the interfacial structure and potential with respect to two different lipophilic ligands. Indeed, we show for the first time that hard trivalent cations can be repelled or attracted by the extractant-enriched interface according to the nature of the ligand.
RESUMO
Because of their amphiphilic structure, surfactants adsorb at the water-air interface with their hydrophobic tails pointing out of the water and their polar heads plunging into the liquid phase. Unlike classical surfactants, metallabisdicarbollides (MCs) do not have a well-defined amphiphilic structure. They are nanometer-sized inorganic anions with an ellipsoidal shape composed of two carborane semicages sandwiching a metal ion. However, MCs have been shown to share many properties with surfactants, such as self-assembly in water (formation of micelles and vesicles), formation of lamellar lyotropic phases, and surface activity. By combining second harmonic generation and surface tension measurement, we show here that cobaltabis(dicarbollide) anion {[(C2B9H11)2Co](-) also named [COSAN](-)} with H(+) as a counterion, the most representative metallacarborane, adsorbs vertically at the water surface with its long axis normal to the surface. This vertical molecular orientation facilitates the formation of intermolecular and nonconventional dihydrogen bonds such as the B-H(δ-)···(δ+)H-C bond that has recently been proven to be at the origin of the self-assembly of MCs in water. Therefore, it appears here that lateral dihydrogen bonds are also involved in the surface activity of MCs.
Assuntos
Compostos de Boro/química , Cobalto/química , Compostos Organometálicos/química , Ar , Compostos Organometálicos/síntese química , Tamanho da Partícula , Propriedades de Superfície , Água/químicaRESUMO
Knowledge of the supramolecular structure of the organic phase containing amphiphilic ligand molecules is mandatory for full comprehension of ionic separation during solvent extraction. Existing structural models are based on simple geometric aggregates, but no consensus exists on the interaction potentials. Herein, we show that molecular dynamics crossed with scattering techniques offers key insight into the complex fluid involving weak interactions without any long-range ordering. Two systems containing mono- or diamide extractants in heptane and contacted with an aqueous phase were selected as examples to demonstrate the advantages of coupling the two approaches for furthering fundamental studies on solvent extraction.
RESUMO
In this study, we explore the superchaotropic effect of various polyoxometalate or boron cluster nano-ions on hydrophilic neutral surfaces. Nano-ions, characterized by low charge densities, exhibit strong adsorption on non-ionic hydrophilic surfaces like PEGylated micelles. This adsorption phenomenon was attributed to the enthalpically favorable dehydration of nano-ions, the so-called superchaotropic effect. Here, we investigate the adsorption of three nano-ions, α-SiW12O404-, α-PW12O403-, and B12I122-, with decreasing charge density or increasing superchaotropicity (or hydrophobicity), on hydrophilic solid surfaces, PEGylated gold nanoparticles, and PEGylated gold-coated quartz crystal. Solid surfaces are devoid of hydrophobic regions, enabling the study of the subtle nuance between hydrophobic and superchaotropic effects. Unlike adsorption on PEGylated micelles, the adsorption constant decreases with a reduced charge density, aligning with the well-established principle that hydrophobic ions do not adsorb on hydrophilic surfaces. This research improves our understanding of the subtle difference between superchaotropic and hydrophobic effects in nano-ion adsorption phenomena.