Conjugated polymer patterning through photooxidative backbone cleavage.

Photolithographic patterning of a xanthate precursor to poly(3,4-diphenyl-2,5-thienylene vinylene) is described. Unlike xanthate precursors to poly(p-phenylene vinylene), the thienylene vinylene analogue patterns as a positive tone resist. Characterization of irradiated films reveals photooxidative cleavage of the vinylene linker decreases the molecular weight of the polymer (increasing the solubility of the UV-exposed areas). As a result of the mechanism, the developed pattern sees no UV light exposure, which is a significant advantage compared with negative-tone-conjugated polymer resists. Single micron resolution of a low-bandgap polymer is achieved in an efficient and scalable process.

Thermally-activated pentanol delivery from precursor poly(p-phenylenevinylene)s for MEMS lubrication.

The synthesis of two new polyphenylene vinylene (PPV) precursor polymers which can be thermally induced to eliminate pentanol is presented. Pentanol has recently been discovered to be a very useful lubricant in MicroElectroMechanical Systems. The utilization of the elimination reaction of precursor polymers to PPV as a small molecule delivery platform has, to the best of our knowledge, not been previously reported. The elimination reactions were examined using thermal gravimetric analysis, gas chromatography, and UV-Vis spectroscopy. Using PPV precursors allows for (1) a high loading of lubricant (one molecule per monomeric unit), (2) a platform that requires relatively high temperatures (>145 °C) to eliminate the lubricant, and (3) a non-volatile, mechanically and chemically stable by-product of the elimination reaction (PPV).

Electrically addressable diazonium-functionalized antibodies for multianalyte electrochemical sensor applications.

The direct electrically addressable deposition of diazonium-modified antibodies is examined for electrochemical immunosensing applications. The immobilized antibodies can be detected by the use of electroactive enzyme tags and nanoparticle-gold labeling. Control over antibody functionalization density and minimal spontaneous grafting of diazonium-antibody adducts is shown. The utility of the technique for a sandwich immunoassay as well as the ability to individually and selectively address closely spaced microelectrodes for multi-target protein detection in an array format is demonstrated.

Reagentless electrochemical immunoassay using electrocatalytic nanoparticle-modified antibodies.

We describe a new approach for reagentless electrochemical immunoassay sensing in which Au/Pd NPs can be "loaded" onto antibodies to create an electrocatalytic antibody that is sensitive to the oxygen reduction reaction.

Relative conductances of alkaneselenolate and alkanethiolate monolayers on Au{111}.

The electronic properties of alkanethiolate [CH3(CH2)nS-, n = 9 and 11] and alkaneselenolate [CH3(CH2)nSe-, n = 9 and 11] self-assembled monolayers on Au{111} have been quantitatively compared. Simultaneously acquired apparent tunneling barrier height (ATBH) and scanning tunneling microscopy (STM) images reveal that alkanethiolate molecules have a lower barrier to tunneling, and therefore a higher conductance than alkaneselenolates of the same alkyl chain length. Molecular and contact conductance differences were elucidated by using observed STM topographic tunneling height differences between the analogous species. This apparent topographic difference combined with comparative ATBH data indicate that the observed decrease in conductance for alkaneselenolates compared to alkanethiolates originates exclusively from the Au-chalcogenide physical, chemical, and electronic contact.

Plasmonic fluorescent nanocomposites of cyanines self-assembled upon gold nanoparticle scaffolds.

Plasmonic fluorescent nanocomposites are difficult to prepare due to strong quenching effects on fluorophores in the vicinity of noble metal nanoparticles such as gold (AuNPs). We successfully prepared plasmonic fluorescent nanocomposites of two cyanines (1 and 2) aggregating upon 2 - 40 nm AuNPs or streptavidin-conjugated 10 nm AuNPs. We used high throughput screening (HTS) for the first time to characterize the spectral properties, aggregation kinetics, aggregation density and photostability of the nanocomposites. Fluorescence from nanocomposites declined inversely with AuNPs size: 40 nm ≥ 20 nm > 10 nm > 5 nm > 2 nm. Sensitivity (limit of detection, LOD, 10(5) - 10(11) AuNPs/mL), brightness of the nanocomposites and surface coverage of AuNPs by cyanine aggregates were all influenced by five factors: 1) AuNPs size; 2) cyanine type (1 or 2); 3) aggregate density; 4) distance between aggregates and AuNPs surface; and 5) streptavidin protein conjugation to AuNPs. We propose a model for plasmonic fluorescent nanocomposites based on these observations. Our plasmonic fluorescent nanocomposites have applications in chemical and biological assays.

Photopatterning poly(p-phenylenevinylene) from xanthate precursor polymers.

A simple, direct method for photopatterning poly(p-phenylenevinylene) (PPV) from a xanthate precursor polymer is presented. The effect of UV exposure on the resultant PPV is examined by UV-Vis, XPS, FTIR, and DC conductivity measurements. By optimizing the photolithographic conditions, a spatial resolution of one micron is obtained, with minimal impact to the properties of the photopatterned PPV.

Selective immobilization of DNA and antibody probes on electrode arrays: simultaneous electrochemical detection of DNA and protein on a single platform.

A proof of concept procedure for the electroaddressable covalent immobilization of DNA and protein on arrayed electrodes along with simultaneous detection of multiple bioagents in the same sample solution is described. Carboxyphenyldiazonium was selectively deposited onto five of nine individually addressable electrodes in an array via bias assisted assembly. Amine functionalized DNA probes were covalently coupled to the carboxyl surface via carbodiimide chemistry. This was followed by the covalent immobilization of diazonium-antibody conjugates into the remaining four electrodes via cyclic voltammetry. Simultaneous electrochemical detection of a DNA sequence related to the breast cancer BRCA1 gene and the human cytokine protein interleukin-12, which is a substantial component in the immune system response and attack of tumor cells, is reported. These results demonstrate the possibility of selective patterning of diverse biomolecules on a single device and may have significant implications for future development of microarrays and biosensors.

Diazonium-functionalized horseradish peroxidase immobilized via addressable electrodeposition: direct electron transfer and electrochemical detection.

A simple one-step procedure is introduced for the preparation of diazonium-enzyme adducts. The direct electrically addressable deposition of diazonium-modified enzymes is examined for electrochemical sensor applications. The deposition of diazonium-horseradish peroxidase leads to the direct electron transfer between the enzyme and electrode exhibiting a heterogeneous rate constant, ks, of 10.3 +/- 0.7 s-1 and a DeltaEp of 8 mV (v = 150 mV/s). The large ks and low DeltaEp are attributed to the intimate contact between enzyme and electrode attached by one to three phenyl molecules. Such an electrode shows high nonmediated catalytic activity toward H2O2 reduction. Future generations of arrayed electrochemical sensors and studies of direct electron transfer of enzymes can benefit from protein electrodes prepared by this method.

UHV STM I(V) and XPS studies of aryl diazonium molecules assembled on Si(111).

Molecular layers formed from 4-trifluoromethylbenzenediazonium tetrafluoroborate and 4-Methylbenzenediazonium tetrafluoroborate have been assembled on H-passivated Si(111) and studied by UHV STM and XPS. STM imaging shows well-developed Si(111) step edges and terraces both on Si(111):H and Si(111) substrates covered with a molecular layer. STM I(V) data acquired at different tip-substrate separations reveals a factor of approximately 10 enhancement in current for positive bias voltage when current flows through the 4-trifluoromethyl molecule when compared to the 4-methyl variant. The observed current enhancement in I(V) can be understood by comparing the projected density of states of the two molecule-Si systems calculated using a density functional theory local density approximation after geometry optimization was performed via the conjugate gradient method. XPS data independently confirm that H-passivated Si(111) remains oxygen free for short exposures to ambient conditions and provide evidence that the molecules chemically react with the silicon surface.

Potential-directed assembly of aryl iodonium salts onto silicon {100} hydride terminated and platinum surfaces.

A novel electrograft method of forming covalent bonds directly to silicon hydride or platinum surfaces has been demonstrated with the use of iodonium salt precursors. Initially, a silicon substrate is treated with a dilute hydrofluoric acid wash to ensure a hydride-passivated surface, which is immersed in a solution of iodonium salt dissolved in a solution of tetrabutylammonium tetrafluoroborate in acetonitrile. Grafting is accomplished by applying a negative bias to the silicon substrate. Directed assembly has been demonstrated with Pt substrates.

Novel one-dimensional nanogap created with standard optical lithography and evaporation procedures.

This article details a simple four-step procedure to create a one-dimensional nanogap on a buried oxide substrate that relies on conventional photolithography performed on a stack of silicon/silicon oxide/silicon, metal evaporation, and hydrofluoric acid oxide removal. Once the nanogap was fabricated it was bridged with an assembly of 1,8-octanedithiol and 5 nm Au nanoparticles capped with a sacrificial dodecylamine coating. Before assembly, characterization of the nanogaps was performed through electrical measurements and SEM imaging. Post assembly, the resistance of the nanogaps was evaluated. The current increased from 70 fA to 200 microA at +1 V bias, clearly indicating a modification due to nanoparticle molecule assembly. Control experiments without nanoparticles or octanedithiol did not show an increase in current.

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces.

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.

Direct covalent grafting of conjugated molecules onto Si, GaAs, and Pd surfaces from aryldiazonium salts.

Using aryldiazonium salts that are air-stable and easily synthesized, we describe here a one-step, room-temperature route to direct covalent bonds between pi-conjugated organic molecules on three material surfaces: Si, GaAs, and Pd. The Si can be in the form of single crystal Si including heavily doped p-type Si, intrinsic Si, heavily doped n-type Si, on Si(111) and Si(100), and on n-type polycrystalline Si. The formation of the aryl-metal or aryl-semiconductor bond attachments was confirmed by corroborating evidence from ellipsometry, reflectance FTIR, XPS, cyclic voltammetry, and AFM analyses of the surface-grafted monolayers. A data-encompassing explanation for the mechanism suggests a diazonium activation by reduction at the open circuit potential, with aryl radical secondary products bonding to the surface. The synthetic details are included for preparing the surface-grafted monolayers and the precursor diazonium salts. This spontaneous diazonium activation reaction offers an attractive route to highly passivating, robust monolayers and multilayers on many surfaces that allow for strong bonds between carbon and surface atoms with molecular species that are near perpendicular to the surface.

Electrons are transported through phenylene-ethynylene oligomer monolayers via localized molecular orbitals.

We report excellent correlations between the first negative threshold potentials (V(TH)s) for electric conduction, electrochemical potentials, and computed lowest unoccupied molecular orbital energies in a series of phenylene-ethynylene oligomers bearing a sulfur-based anchoring unit and different electroactive substituents on the central benzene ring. The theoretical and electrochemical results strongly suggest that the peaks observed in the i-V curves have a true molecular origin and are associated with distinct unoccupied molecular levels of the compounds that are strongly localized on the central ring (except for compound I). This localization might account for the existence of a long-lived radical-anion state that permits lateral electron hopping and leads to charge trapping and storage.

Charge transport through self-assembled monolayers of compounds of interest in molecular electronics.

The electrical properties of self-assembled monolayers (SAMs) on metal surfaces have been explored for a series of molecules to address the relation between the behavior of a molecule and its structure. We probed interfacial electron transfer processes, particularly those involving unoccupied states, of SAMs of thiolates or arylates on Au by using shear force-based scanning probe microscopy (SPM) combined with current-voltage (i-V) and current-distance (i-d) measurements. The i-V curves of hexadecanethiol in the low bias regime were symmetric around 0 V and the current increased exponentially with V at high bias voltage. Different than hexadecanethiol, reversible peak-shaped i-V characteristics were obtained for most of the nitro-based oligo(phenylene ethynylene) SAMs studied here, indicating that part of the conduction mechanism of these junctions involved resonance tunneling. These reversible peaked i-V curves, often described as a negative differential resistance (NDR) effect of the junction, can be used to define a threshold tip bias, V(TH), for resonant conduction. We also found that for all of the SAMs studied here, the current decreased with increasing distance, d, between tip and substrate. The attenuation factor beta of hexadecanethiol was high, ranging from 1.3 to 1.4 A(-1), and was nearly independent of the tip bias. The beta-values for nitro-based molecules were low and depended strongly on the tip bias, ranging from 0.15 A(-1) for tetranitro oligo(phenylene ethynylene) thiol, VII, to 0.50 A(-1) for dinitro oligo(phenylene) thiol, VI, at a -3.0 V tip bias. Both the V(TH) and beta values of these nitro-based SAMs were also strongly dependent on the structures of the molecules, e.g. the number of electroactive substituent groups on the central benzene, the molecular wire backbone, the anchoring linkage, and the headgroup. We also observed charge storage on nitro-based molecules. For a SAM of the dintro compound, V, approximately 25% of charge collected in the negative scan is stored in the molecules and can be collected at positive voltages. A possible mechanism involving lateral electron hopping is proposed to explain this phenomenon.