RESUMO
Technologically critical rare-earth elements are notoriously difficult to separate, owing to their subtle differences in ionic radius and coordination number1-3. The natural lanthanide-binding protein lanmodulin (LanM)4,5 is a sustainable alternative to conventional solvent-extraction-based separation6. Here we characterize a new LanM, from Hansschlegelia quercus (Hans-LanM), with an oligomeric state sensitive to rare-earth ionic radius, the lanthanum(III)-induced dimer being >100-fold tighter than the dysprosium(III)-induced dimer. X-ray crystal structures illustrate how picometre-scale differences in radius between lanthanum(III) and dysprosium(III) are propagated to Hans-LanM's quaternary structure through a carboxylate shift that rearranges a second-sphere hydrogen-bonding network. Comparison to the prototypal LanM from Methylorubrum extorquens reveals distinct metal coordination strategies, rationalizing Hans-LanM's greater selectivity within the rare-earth elements. Finally, structure-guided mutagenesis of a key residue at the Hans-LanM dimer interface modulates dimerization in solution and enables single-stage, column-based separation of a neodymium(III)/dysprosium(III) mixture to >98% individual element purities. This work showcases the natural diversity of selective lanthanide recognition motifs, and it reveals rare-earth-sensitive dimerization as a biological principle by which to tune the performance of biomolecule-based separation processes.
Assuntos
Proteínas de Bactérias , Elementos da Série dos Lantanídeos , Lantânio , Multimerização Proteica , Disprósio/química , Disprósio/isolamento & purificação , Íons/química , Elementos da Série dos Lantanídeos/química , Elementos da Série dos Lantanídeos/isolamento & purificação , Lantânio/química , Neodímio/química , Neodímio/isolamento & purificação , Methylocystaceae , Proteínas de Bactérias/química , Proteínas de Bactérias/metabolismo , Cristalografia por Raios X , Estrutura Quaternária de ProteínaRESUMO
Microbes are critical drivers of all ecosystems and many biogeochemical processes, yet little is known about how the three-dimensional (3D) organization of these dynamic organisms contributes to their overall function. To probe how biofilm structure affects microbial activity, we developed a technique for patterning microbes in 3D geometries using projection stereolithography to bioprint microbes within hydrogel architectures. Bacteria were printed and monitored for biomass accumulation, demonstrating postprint viability of cells using this technique. We verified our ability to integrate biological and geometric complexity by fabricating a printed biofilm with two E. coli strains expressing different fluorescence. Finally, we examined the target application of microbial absorption of metal ions to investigate geometric effects on both the metal sequestration efficiency and the uranium sensing capability of patterned engineered Caulobacter crescentus strains. This work represents the first demonstration of the stereolithographic printing of microbials and presents opportunities for future work of engineered biofilms and other complex 3D structured cultures.
Assuntos
Bioimpressão , Biofilmes , Ecossistema , Escherichia coli/genética , Impressão TridimensionalRESUMO
Scandium (Sc) has great potential for use in aerospace and clean energy applications, but its supply is currently limited by a lack of commercially viable deposits and the environmental burden of its production. In this work, a biosorption-based flow-through process was developed for extraction of Sc from low-grade feedstocks. A microbe-encapsulated silica gel (MESG) biosorbent was synthesized through sol-gel encapsulation of Arthrobacter nicotianae, a bacterium that selectively adsorbs Sc. Microscopic imaging revealed a high cell loading and macroporous structure, which enabled rapid mass transport and adsorption/desorption of metal ions. The biosorbent displayed high Sc selectivity against lanthanides and major base metals, with the exception of Fe(III). Following pH adjustment to remove Fe(III) from an acid leachate prepared from lignite coal, a packed-bed column loaded with the MESG biosorbent exhibited near-complete Sc separation from lanthanides; the column eluate had a Sc enrichment factor of 10.9, with Sc constituting 96.4% of the total rare earth elements. The MESG biosorbent exhibited no significant degradation with regard to both adsorption capacity and physical structure after 10 adsorption/desorption cycles. Overall, our results suggest that the MESG biosorbent offers an effective and green alternative to conventional liquid-liquid extraction for Sc recovery.
Assuntos
Carvão Mineral , Poluentes Químicos da Água , Adsorção , Compostos Férricos , Concentração de Íons de Hidrogênio , Cinética , Micrococcaceae , Escândio , Sílica GelRESUMO
Cancer is a major health problem in the United States with extremely high mortality. The detection and isolation of cancer cells are becoming increasingly important for cancer diagnosis. We describe a microfluidic device modified with silica nanoparticles to enhance the isolation of cancer cells using affinity separation. The isolation of seven different cancer cell lines spiked into liquid biopsies was demonstrated and compared with unmodified separation devices. Cancer cells were isolated using CD71 which has already been demonstrated to be a widespread "net" for capturing cancer cells of any phenotype as the affinity target. The capture efficiency of our nanoparticle (NP)-modified HB chip showed significant differences compared with the normal HB chip, exhibiting an average increase of 16%. The cell enrichment increased by a factor of 2 over unmodified chips. Patient-derived ALL cells, COG-LL-332, were spiked into blood with concentrations ranging from 1% to 20% of total leukocytes, and isolated with the purity of 41%-65%. The results of this study demonstrated that the increase of cell-chip interactions after nanoparticle modification improved capture efficiency and capture purity, and can be applied to a wide range of cell separations.
Assuntos
Separação Celular/métodos , Imunoensaio/métodos , Técnicas Analíticas Microfluídicas/métodos , Nanopartículas/química , Neoplasias/diagnóstico , Anticorpos Imobilizados/imunologia , Antígenos CD/imunologia , Linhagem Celular Tumoral , Humanos , Dispositivos Lab-On-A-Chip , Receptores da Transferrina/imunologia , Dióxido de Silício/químicaRESUMO
A graphene oxide (GO) membrane is supported on a ceramic hollow fiber prepared by a vacuum suction method. This GO membrane exhibited excellent water permeation for dimethyl carbonate/water mixtures through a pervaporation process. At 25 °C and 2.6â wt % feed water content, the permeate water content reached 95.2â wt% with a high permeation flux (1702â g m(-2) h(-1)).
RESUMO
BACKGROUND: Increasing evidence has indicated that ferroptosis engages in the progression of Parkinson's disease (PD). This study aimed to explore the role of ferroptosis-related genes (FRGs), immune infiltration and immune checkpoint genes (ICGs) in the pathogenesis and development of PD. METHODS: The microarray data of PD patients and healthy controls (HC) from the Gene Expression Omnibus (GEO) database was downloaded. Weighted gene co-expression network analysis (WGCNA) was processed to identify the significant modules related to PD in the GSE18838 dataset. Machine learning algorithms were used to screen the candidate biomarkers based on the intersect between WGCNA, FRGs and differentially expressed genes. Enrichment analysis of GSVA, GSEA, GO, KEGG, and immune infiltration, group comparison of ICGs were also performed. Next, candidate biomarkers were validated in clinical samples by ELISA and receiver operating characteristic curve (ROC) was used to assess diagnose ability. RESULTS: In this study, FRGs had correlations with ICGs, immune infiltration. Then, plasma levels of LPIN1 in PD was significantly lower than that in healthy controls, while the expression of TNFAIP3 was higher in PD in comparison with HC. ROC curves showed that the area under curve (AUC) of the LPIN1 and TNFAIP3 combination was 0.833 (95% CI: 0.750-0.916). Moreover, each biomarker alone could discriminate the PD from HC (LPIN1: AUC = 0.754, 95% CI: 0.659-0.849; TNFAIP3: AUC = 0.754, 95% CI: 0.660-0.849). For detection of early PD from HC, the model of combination maintained diagnostic accuracy with an AUC of 0.831 (95% CI: 0.734-0.927), LPIN1 also performed well in distinguishing the early PD from HC (AUC = 0.817, 95% CI: 0.717-0.917). However, the diagnostic efficacy was relatively poor in distinguishing the early from middle-advanced PD patients. CONCLUSION: The combination model composed of LPIN1 and TNFAIP3, and each biomarker may serve as an efficient tool for distinguishing PD from HC.
Assuntos
Ferroptose , Doença de Parkinson , Humanos , Doença de Parkinson/diagnóstico , Doença de Parkinson/genética , Algoritmos , Biomarcadores , Biologia Computacional , Fosfatidato FosfataseRESUMO
Objective: Parkinson's disease (PD) is the most common neurodegenerative movement disorder and immune-mediated mechanism is considered to be crucial to pathogenesis. Here, we investigated the role of humoral immune regulatory molecules in the pathogenesis of PD. Methods: Firstly, we performed a series of bioinformatic analyses utilizing the expression profile of the peripheral blood mononuclear cell (PBMC) obtained from the GEO database (GSE100054, GSE49126, and GSE22491) to identify differentially expressed genes related to humoral immune regulatory mechanisms between PD and healthy controls. Subsequently, we verified the results using quantitative polymerase chain reaction (Q-PCR) and enzyme-linked immunosorbent assay (ELISA) in clinical blood specimen. Lastly, receiver operating characteristic (ROC) curve analysis was performed to determine the diagnostic effects of verified molecules. Results: We obtained 13 genes that were mainly associated with immune-related biological processes in PD using bioinformatic analysis. Then, we selected PPBP, PROS1, and LCN2 for further exploration. Fascinatingly, our experimental results don't always coincide with the expression profile. PROS1 and LCN2 plasma levels were significantly higher in PD patients compared to controls (p < 0.01 and p < 0.0001). However, the PPBP plasma level and expression in the PBMC of PD patients was significantly decreased compared to controls (p < 0.01 and p < 0.01). We found that PPBP, PROS1, and LCN2 had an area under the curve (AUC) of 0.663 (95%CI: 0.551-0.776), 0.674 (95%CI: 0.569-0.780), and 0.885 (95%CI: 0.814-0.955). Furthermore, in the biological process analysis of gene ontology (GO), the three molecules were all involved in humoral immune response (GO:0006959). Conclusions: In general, PPBP, PROS1, and LCN2 were identified and validated to be related to PD and PPBP, LCN2 may potentially be biomarkers or therapeutic targets for PD. Our findings also provide some new insights on the humoral immune modulation mechanisms in PD.
Assuntos
Doença de Parkinson , Biomarcadores , Biologia Computacional , Humanos , Leucócitos Mononucleares/metabolismo , Doença de Parkinson/diagnóstico , Curva ROCRESUMO
Biocement formed through microbially induced calcium carbonate precipitation (MICP) is an emerging biotechnology focused on reducing the environmental impact of concrete production. In this system, CO2 species are provided via ureolysis by Sporosarcina pasteurii (S. pasteurii) to carbonate monocalcium silicate for MICP. This is one of the first studies of its kind that uses a solid-state calcium source, while prior work has used highly soluble forms. Our study focuses on microbial physiological, chemical thermodynamic, and kinetic studies of MICP. Monocalcium silicate incongruently dissolves to form soluble calcium, which must be coupled with CO2 release to form calcium carbonate. Chemical kinetic modeling shows that calcium solubility is the rate-limiting step, but the addition of organic acids significantly increases the solubility, enabling extensive carbonation to proceed up to 37 mol %. The microbial urease activity by S. pasteurii is active up to pH 11, 70 °C, and 1 mol L-1 CaCl2, producing calcite as a means of solidification. Cell-free extracts are also effective albeit less robust at extreme pH, producing calcite with different physical properties. Together, these data help determine the chemical, biological, and thermodynamic parameters critical for scaling microbial carbonation of monocalcium silicate to high-density cement and concrete.
RESUMO
The extraction and subsequent separation of individual rare earth elements (REEs) from REE-bearing feedstocks represent a challenging yet essential task for the growth and sustainability of renewable energy technologies. As an important step toward overcoming the technical and environmental limitations of current REE processing methods, we demonstrate a biobased, all-aqueous REE extraction and separation scheme using the REE-selective lanmodulin protein. Lanmodulin was conjugated onto porous support materials using thiol-maleimide chemistry to enable tandem REE purification and separation under flow-through conditions. Immobilized lanmodulin maintains the attractive properties of the soluble protein, including remarkable REE selectivity, the ability to bind REEs at low pH, and high stability over numerous low-pH adsorption/desorption cycles. We further demonstrate the ability of immobilized lanmodulin to achieve high-purity separation of the clean-energy-critical REE pair Nd/Dy and to transform a low-grade leachate (0.043 mol % REEs) into separate heavy and light REE fractions (88 mol % purity of total REEs) in a single column run while using â¼90% of the column capacity. This ability to achieve, for the first time, tandem extraction and grouped separation of REEs from very complex aqueous feedstock solutions without requiring organic solvents establishes this lanmodulin-based approach as an important advance for sustainable hydrometallurgy.
RESUMO
Actinium-based therapies could revolutionize cancer medicine but remain tantalizing due to the difficulties in studying and limited knowledge of Ac chemistry. Current efforts focus on small synthetic chelators, limiting radioisotope complexation and purification efficiencies. Here, we demonstrate a straightforward strategy to purify medically relevant radiometals, actinium(III) and yttrium(III), and probe their chemistry, using the recently discovered protein, lanmodulin. The stoichiometry, solution behavior, and formation constant of the 228Ac3+-lanmodulin complex and its 90Y3+/natY3+/natLa3+ analogs were experimentally determined, representing the first actinium-protein and strongest actinide(III)-protein complex (sub-picomolar Kd) to be characterized. Lanmodulin's unparalleled properties enable the facile purification recovery of radiometals, even in the presence of >10+10 equivalents of competing ions and at ultratrace levels: down to 2 femtograms 90Y3+ and 40 attograms 228Ac3+. The lanmodulin-based approach charts a new course to study elusive isotopes and develop versatile chelating platforms for medical radiometals, both for high-value separations and potential in vivo applications.
RESUMO
Functionalized alginate microbeads (MB) have been widely used for three-dimensional (3D) culture of cells and creating biomimetic tissue models. However, conventional methods for preparing these MB suffer from poor polydispersity, due to coalescence of droplets during the gelation process and post-aggregation. It remains an immense challenge to prepare alginate MB with narrow size distribution and uniform shape, especially when their diameters are similar to the size of cells. In this work, we developed a simple method to produce monodispersed, cell-size alginate MB through microfluidic emulsification, followed by a controlled shrinkage process and gelation in mineral oil with low concentration of calcium ion (Ca2+). During the gelation process caused by the diffusion of Ca2+ from the oil to water phase, a large amount of satellite droplets with sub-micrometer sizes was formed at the water/oil interface. As a result, each original droplet was transformed to one shrunken-MB with much smaller size and numerous submicron-size satellites. To explore the feasibility of the shrunken-MB for culturing with cells, we have successfully modified a variety of polymer nanofilms on MB surfaces using a layer-by-layer assembly approach. Finally, the nanofilm-modified MB was applied to a 3D culture of GFP-expressing fibroblast cells and demonstrated good biocompatibility.
RESUMO
The high purity of target cells enriched from blood samples plays an important role in the clinical detection of diseases. However, non-specific binding of blood cells in the isolated cell samples can complicate downstream molecular and genetic analysis. In this work, we report a simple solution to non-specific binding of blood cells by modifying the surface of microchips with a multilayer nanofilm, with the outmost layer containing both PEG brushes for reducing blood cell adhesion and antibodies for enriching target cells. This layer-by-layer (LbL) polysaccharide nanofilm was modified with neutravindin and then conjugated with a mixture of biotinylated PEG molecules and biotinylated antibodies. Using EpCAM-expressing and HER2-expressing cancer cells in blood as model platforms, we were able to dramatically reduce the non-specific binding of blood cells to approximately 1 cell per mm2 without sacrificing the high capture efficiency of the microchip. To support the rational extension of this approach to other applications for cell isolation and blood cell resistance, we conducted extensive characterization on the nanofilm formation and degradation, antifouling with PEG brushes and introducing functional antibodies. This simple, yet effective, approach can be applied to a variety of microchip applications that require high purity of sample cells containing minimal contamination from blood cells.
Assuntos
Células Sanguíneas/metabolismo , Separação Celular/métodos , Dispositivos Lab-On-A-Chip , Neoplasias/patologia , Células Neoplásicas Circulantes/patologia , Anticorpos/química , Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Células Sanguíneas/patologia , Adesão Celular , Linhagem Celular Tumoral , Molécula de Adesão da Célula Epitelial/metabolismo , Humanos , Nanoestruturas/química , Neoplasias/sangue , Células Neoplásicas Circulantes/metabolismo , Polietilenoglicóis/química , Receptor ErbB-2/imunologia , Propriedades de SuperfícieRESUMO
Self-floating hollow glass microspheres (HGMS) modified with tumor-specific antibodies have been developed for the capture of circulating tumor cells (CTCs), and have demonstrated effective cell isolation and good viability of isolated cancer cells. However, the capture efficiency decreases dramatically if the spiked cell concentration is low, possibly due to insufficient interactions between cancer cells and the HGMS surface. In order to apply HGMS-based CTC isolation to clinically relevant samples, it is desirable to create nanostructures on the surface of HGMS to enhance cell-surface interactions. Nevertheless, current microfabrication methods cannot generate nanostructured-surfaces on microspheres. The authors have developed a new HGMS with a controlled nanotopographical surface structure (NSHGMS), and demonstrated isolation and recovery of rare cancer cells. NSHGMS are achieved by applying layer-by-layer (LbL) assembly of negatively charged SiO2 nanoparticles and positively charged poly-l-arginine molecules, then sheathing the surface with an enzymatically degradable LbL film made from biotinylated alginate and poly-l-arginine, and capping with anti-EpCAM antibodies and anti-fouling PEG molecules. Compared to smooth-surfaced HGMS, NSHGMS showed shorter isolation time (20 min), enhanced capture efficiency (93.6 ± 4.9%) and lower detection limit (30 cells per mL) for commonly used cancer cell lines (MCF7, SK-BR-3, PC-3, A549 and CCRF-CEM). This NSHGMS-based CTC isolation method does not require specialized lab equipment or an external power source, and thus, can be used for the separation of targeted cells from blood or other body fluids in a resource-limited environment.
Assuntos
Separação Celular/métodos , Microesferas , Células Neoplásicas Circulantes , Linhagem Celular Tumoral , Humanos , Dióxido de SilícioRESUMO
Ex vivo cell aggregates must overcome significant limitations in the transport of nutrients, drugs, and signaling proteins compared to vascularized native tissue. Further, engineered extracellular environments often fail to sufficiently replicate tethered signaling cues and the complex architecture of native tissue. Co-cultures of cells with microparticles (MPs) is a growing field directed towards overcoming many of these challenges by providing local and controlled presentation of both soluble and tethered proteins and small molecules. Further, co-cultured MPs offer a mechanism to better control aggregate architecture and even to report key characteristics of the local microenvironment such as pH or oxygen levels. Herein, we provide a brief introduction to established and developing strategies for MP production including the choice of MP materials, fabrication techniques, and techniques for incorporating additional functionality. In all cases, we emphasize the specific utility of each approach to form MPs useful for applications in cell aggregate co-culture. We review established techniques to integrate cells and MPs. We highlight those strategies that promote targeted heterogeneity or homogeneity, and we describe approaches to engineer cell-particle and particle-particle interactions that enhance aggregate stability and biological response. Finally, we review advances in key application areas of MP aggregates and future areas of development. STATEMENT OF SIGNIFICANT: Cell-scaled polymer microparticles (MPs) integrated into cellular aggregates have been shown to be a powerful tool to direct cell response. MPs have supported the development of healthy cartilage, islets, nerves, and vasculature by the maintenance of soluble gradients as well as by the local presentation of tethered cues and diffusing proteins and small molecules. MPs integrated with pluripotent stem cells have directed in vivo expansion and differentiation. Looking forward, MPs are expected to support both the characterization and development of in vitro tissue systems for applications such as drug testing platforms. However, useful co-cultures must be designed keeping in mind the limitations and attributes of each material strategy within the context of the overall tissue biology. The present review integrates prospectives from materials development, drug delivery, and tissue engineering to provide a toolbox for the development and application of MPs useful for long-term co-culture within cell aggregates.
Assuntos
Materiais Biocompatíveis , Técnicas de Cultura de Células/métodos , Microambiente Celular , Células-Tronco Pluripotentes/metabolismo , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Agregação Celular/efeitos dos fármacos , Humanos , Células-Tronco Pluripotentes/citologiaRESUMO
Established cell isolation and purification techniques such as fluorescence-activated cell sorting (FACS), isolation through magnetic micro/nanoparticles, and recovery via microfluidic devices have limited application as disposable technologies appropriate for point-of-care use in remote areas where lab equipment as well as electrical, magnetic, and optical sources are restricted. We report a simple yet effective method for cell isolation and recovery that requires neither specialized lab equipment nor any form of power source. Specifically, self-floating hollow glass microspheres were coated with an enzymatically degradable nanolayered film and conjugated with antibodies to allow both fast capture and release of subpopulations of cells from a cell mixture. Targeted cells were captured by the microspheres and allowed to float to the top of the hosting liquid, thereby isolating targeted cells. To minimize nonspecific adhesion of untargeted cells and to enhance the purity of the isolated cell population, an antifouling polymer brush layer was grafted onto the nanolayered film. Using the EpCAM-expressing cancer cell line PC-3 in blood as a model system, we have demonstrated the isolation and recovery of cancer cells without compromising cell viability or proliferative potential. The whole process takes less than 1 h. To support the rational extension of this platform technology, we introduce extensive characterization of the critical design parameters: film formation and degradation, grafting with a poly(ethylene glycol) (PEG) sheath, and introducing functional antibodies. Our approach is expected to overcome practical hurdles and provide viable targeted cells for downstream analyses in resource-limited settings.
Assuntos
Microesferas , Separação Celular , Citometria de Fluxo , Vidro , PolímerosRESUMO
Capillary flow layer-by-layer (CF-LbL) is a microfluidic platform for high throughput preparation and screening of nanolayered polymer films. Using a simple benchtop version of CF-LbL, we systematically studied the effects of various flow conditions and channel geometries on the thickness and surface roughness of the resulting films. We also investigated the biocompatibility and degradation behaviors of a series of enzymatically-degradable films made from naturally derived polymers, i.e. either alginate or hyaluronic acid as the anionic species and poly-l-arginine as the positive species. Furthermore, using one optimized film formulation for coating on the inside walls of a microfluidic chip, we successfully demonstrated the ability of this film to capture and rapidly release cancer cells from whole blood. This simple platform is expected to be a powerful tool to increase the accessibility of the LbL film assembly to a broader scientific community.
RESUMO
For the first time, a ZIF-8 membrane was grown on the inner surface of a ceramic hollow fiber via cycling precursors. The inner-side hollow fiber ZIF-8 membrane exhibits good performance for recovering hydrogen.