Regulation of microtubule dynamics by kinesins.

The simple mechanistic and functional division of the kinesin family into either active translocators or non-motile microtubule depolymerases was initially appropriate but is now proving increasingly unhelpful, given evidence that several translocase kinesins can affect microtubule dynamics, whilst non-translocase kinesins can promote microtubule assembly and depolymerisation. Such multi-role kinesins act either directly on microtubule dynamics, by interaction with microtubules and tubulin, or indirectly, through the transport of other factors along the lattice to the microtubule tip. Here I review recent progress on the mechanisms and roles of these translocase kinesins.

Anchoring geometry is a significant factor in determining the direction of kinesin-14 motility on microtubules.

Kinesin-14 microtubule-based motors have an N-terminal tail attaching the catalytic core to its load and usually move towards microtubule minus ends, whilst most other kinesins have a C-terminal tail and move towards plus ends. Loss of conserved sequences external to the motor domain causes kinesin-14 to switch to plus-end motility, showing that an N-terminal attachment is compatible with plus-end motility. However, there has been no systematic study on the role of attachment position in minus-end motility. We therefore examined the motility of monomeric kinesin-14s differing only in their attachment point. We find that a C-terminal attachment point causes kinesin-14s to become plus-end-directed, with microtubule corkscrewing rotation direction and pitch in motility assays similar to that of kinesin-1, suggesting that both C-kinesin kinesins-14 and N-kinesin kinesin-1 share a highly conserved catalytic core function with an intrinsic plus-end bias. Thus, an N-terminal attachment is one of the requirements for minus-end motility in kinesin-14.

Mal3 masks catastrophe events in Schizosaccharomyces pombe microtubules by inhibiting shrinkage and promoting rescue.

Schizosaccharomyces pombe Mal3 is a member of the EB family of proteins, which are proposed to be core elements in a tip-tracking network that regulates microtubule dynamics in cells. How Mal3 itself influences microtubule dynamics is unclear. We tested the effects of full-length recombinant Mal3 on dynamic microtubules assembled in vitro from purified S. pombe tubulin, using dark field video microscopy to avoid fluorescent tagging and data-averaging techniques to improve spatiotemporal resolution. We find that catastrophe occurs stochastically as a fast (<2.2 s) transition from constant speed growth to constant speed shrinkage with a constant probability that is independent of the Mal3 concentration. This implies that Mal3 neither stabilizes nor destabilizes microtubule tips. Mal3 does, however, stabilize the main part of the microtubule lattice, inhibiting shrinkage and increasing the frequency of rescues, consistent with recent models in which Mal3 on the lattice forms stabilizing lateral links between neighboring protofilaments. At high concentrations, Mal3 can entirely block shrinkage and induce very rapid rescue, making catastrophes impossible to detect, which may account for the apparent suppression of catastrophe by Mal3 and other EBs in vivo. Overall, we find that Mal3 stabilizes microtubules not by preventing catastrophe at the microtubule tip but by inhibiting lattice depolymerization and enhancing rescue. We argue that this implies that Mal3 binds microtubules in different modes at the tip and on the lattice.

Alp7/TACC-Alp14/TOG generates long-lived, fast-growing MTs by an unconventional mechanism.

Alp14 is a TOG-family microtubule polymerase from S. pombe that tracks plus ends and accelerates their growth. To interrogate its mechanism, we reconstituted dynamically unstable single isoform S. pombe microtubules with full length Alp14/TOG and Alp7, the TACC-family binding partner of Alp14. We find that Alp14 can drive microtubule plus end growth at GTP-tubulin concentrations at least 10-fold below the usual critical concentration, at the expense of increased catastrophe. This reveals Alp14 to be a highly unusual enzyme that biases the equilibrium for the reaction that it catalyses. Alp7/TACC enhances the effectiveness of Alp14, by increasing its occupancy. Consistent with this, we show in live cells that Alp7 deletion produces very similar MT dynamics defects to Alp14 deletion. The ability of Alp7/14 to accelerate and bias GTP-tubulin exchange at microtubule plus ends allows it to generate long-lived, fast-growing microtubules at very low cellular free tubulin concentrations.

Ectopic A-lattice seams destabilize microtubules.

Natural microtubules typically include one A-lattice seam within an otherwise helically symmetric B-lattice tube. It is currently unclear how A-lattice seams influence microtubule dynamic instability. Here we find that including extra A-lattice seams in GMPCPP microtubules, structural analogues of the GTP caps of dynamic microtubules, destabilizes them, enhancing their median shrinkage rate by >20-fold. Dynamic microtubules nucleated by seeds containing extra A-lattice seams have growth rates similar to microtubules nucleated by B-lattice seeds, yet have increased catastrophe frequencies at both ends. Furthermore, binding B-lattice GDP microtubules to a rigor kinesin surface stabilizes them against shrinkage, whereas microtubules with extra A-lattice seams are stabilized only slightly. Our data suggest that introducing extra A-lattice seams into dynamic microtubules destabilizes them by destabilizing their GTP caps. On this basis, we propose that the single A-lattice seam of natural B-lattice MTs may act as a trigger point, and potentially a regulation point, for catastrophe.

S. pombe kinesins-8 promote both nucleation and catastrophe of microtubules.

The kinesins-8 were originally thought to be microtubule depolymerases, but are now emerging as more versatile catalysts of microtubule dynamics. We show here that S. pombe Klp5-436 and Klp6-440 are non-processive plus-end-directed motors whose in vitro velocities on S. pombe microtubules at 7 and 23 nm s(-1) are too slow to keep pace with the growing tips of dynamic interphase microtubules in living S. pombe. In vitro, Klp5 and 6 dimers exhibit a hitherto-undescribed combination of strong enhancement of microtubule nucleation with no effect on growth rate or catastrophe frequency. By contrast in vivo, both Klp5 and Klp6 promote microtubule catastrophe at cell ends whilst Klp6 also increases the number of interphase microtubule arrays (IMAs). Our data support a model in which Klp5/6 bind tightly to free tubulin heterodimers, strongly promoting the nucleation of new microtubules, and then continue to land as a tubulin-motor complex on the tips of growing microtubules, with the motors then dissociating after a few seconds residence on the lattice. In vivo, we predict that only at cell ends, when growing microtubule tips become lodged and their growth slows down, will Klp5/6 motor activity succeed in tracking growing microtubule tips. This mechanism would allow Klp5/6 to detect the arrival of microtubule tips at cells ends and to amplify the intrinsic tendency for microtubules to catastrophise in compression at cell ends. Our evidence identifies Klp5 and 6 as spatial regulators of microtubule dynamics that enhance both microtubule nucleation at the cell centre and microtubule catastrophe at the cell ends.

Purification of tubulin from the fission yeast Schizosaccharomyces pombe.

The fission yeast Schizosaccharomyces pombe is an attractive source of tubulin for biochemical experiments as it contains few tubulin isoforms and is amenable to genetic manipulation. We describe the preparation of milligram quantities of highly purified native tubulin from S. pombe suitable for use in microtubule dynamics assays as well as structural and other biochemical studies. S. pombe cells are grown in bulk in a fermenter and then lysed using a bead mill. The soluble protein fraction is bound to anion-exchange chromatography resin by batch binding, packed in a -chromatography column and eluted by a salt gradient. The tubulin-containing fraction is ammonium sulphate precipitated to further concentrate and purify the protein. A round of high-resolution anion-exchange chromatography is carried out before a cycle of polymerisation and depolymerisation to select functional tubulin. Gel filtration is used to remove residual contaminants before a final desalting step. The purified tubulin is concentrated, and then frozen and stored in liquid nitrogen.

The kinesin-14 Klp2 organizes microtubules into parallel bundles by an ATP-dependent sorting mechanism.

The dynamic organization of microtubules into parallel arrays allows interphase cells to set up multi-lane highways for intracellular transport and M-phase cells to build the mitotic and meiotic spindles. Here we show that a minimally reconstituted system composed of Klp2, a kinesin-14 from the fission yeast Schizosaccharomyces pombe, together with microtubules assembled from purified S. pombe tubulin, autonomously assembles bundles of parallel microtubules. Bundles form by an ATP-dependent sorting mechanism that requires the full-length Klp2 motor. By this mechanism, antiparallel-overlapped microtubules slide over one another until they dissociate from the bundles, whereas parallel-overlapped microtubules are selectively trapped by an energy-dissipating force-balance mechanism. Klp2-driven microtubule sorting provides a robust pathway for the organization of microtubules into parallel arrays. In vivo evidence indicates that Klp2 is required for the proper organization of S. pombe interphase microtubules into bipolar arrays of parallel-overlapped microtubules, suggesting that kinesin-14-dependent microtubule sorting may have wide biological importance.

Mal3, the Schizosaccharomyces pombe homolog of EB1, changes the microtubule lattice.

In vitro studies of pure tubulin have suggested that tubulin heterodimers in cells assemble into B-lattice microtubules, where the 8-nm dimers in adjacent protofilaments are staggered by 0.9 nm. This arrangement requires the tube to close by forming a seam with an A-lattice, in which the protofilaments are staggered by 4.9 nm. Here we show that Mal3, an EB1 family tip-tracking protein, drives tubulin to assemble in vitro into exclusively 13-protofilament microtubules with a high proportion of A-lattice protofilament contacts. We present a three-dimensional cryo-EM reconstruction of a purely A-lattice microtubule decorated with Mal3, in which Mal3 occupies the groove between protofilaments and associates closely with one tubulin monomer. We propose that Mal3 promotes assembly by binding to freshly formed tubulin polymer and particularly favors any with A-lattice arrangement. These results reopen the question of microtubule structure in cells.

An ATP gate controls tubulin binding by the tethered head of kinesin-1.

Kinesin-1 is a two-headed molecular motor that walks along microtubules, with each step gated by adenosine triphosphate (ATP) binding. Existing models for the gating mechanism propose a role for the microtubule lattice. We show that unpolymerized tubulin binds to kinesin-1, causing tubulin-activated release of adenosine diphosphate (ADP). With no added nucleotide, each kinesin-1 dimer binds one tubulin heterodimer. In adenylyl-imidodiphosphate (AMP-PNP), a nonhydrolyzable ATP analog, each kinesin-1 dimer binds two tubulin heterodimers. The data reveal an ATP gate that operates independently of the microtubule lattice, by ATP-dependent release of a steric or allosteric block on the tubulin binding site of the tethered kinesin-ADP head.