Moroidin, a Cyclopeptide from the Seeds of Celosia cristata That Induces Apoptosis in A549 Human Lung Cancer Cells.

Interference of microtubule dynamics with tubulin-targeted drugs is a validated approach for cancer chemotherapy. Moroidin (1) is an Urticaceae-type cyclopeptide having a potent inhibitory effect on purified tubulin polymerization. So far, moroidin has not been chemically synthesized, and its effect on cancer cells remains unknown. Herein, the cyclopeptide moroidin was isolated and identified from the seeds of Celosia cristata, and a revised assignment of its NMR data was presented. For the first time, moroidin (1) was demonstrated as having cytotoxic effects for several cancer cells, especially A549 lung cancer cells. The cellular evidence obtained showed that moroidin disrupts microtubule polymerization and decreases ß-tubulin protein levels, but is not as potent as colchicine. Molecular docking indicated that 1 has a high binding potential to the vinca alkaloid site on tubulin. Moreover, moroidin arrested A549 cells in the G2/M phase and induced cell apoptosis. The intrinsic mitochondrial pathway and AKT were involved in the moroidin-induced cell apoptosis. In addition, moroidin (1) inhibited the migration and invasion of A549 cells at sublethal concentrations.

A multimer-based SERS aptasensor for highly sensitive and homogeneous assay of carcinoembryonic antigens.

Carcinoembryonic antigens (CEAs) are known as one of the most common tumor markers. Their facile and affordable detection is critical for early diagnosis of malignant tumors, especially in resource-constrained settings. Here, we report a novel multimer-based surface-enhanced Raman scattering (SERS) aptasensor for a specific CEA assay. The aptasensor is fabricated through aptamer-assisted self-assembly of silver-coated gold nanoparticles (Au@Ag NPs), and the self-assembled multimeric structure possesses abundant hot-spots to provide high SERS response. When CEA is introduced, the specific recognition of CEA by aptamers will lead to the disassembly of Au@Ag multimers due to the lack of a bridging aptamer between Au@Ag NPs. As a result, the number of hot-spots in the multimeric system is decreased, and the intensity at 1585 cm-1 of the SERS reporter (4-mercaptobenzoic acid, 4-MBA) on the surface of NPs will also be decreased. The Raman intensity is proportional to the logarithm of the concentration of CEA. The detection sensitivity can be down to the pg mL-1 level. The analytical method only needs a droplet of 2 µL of sample, and the detection time is less than 20 min. The multimer-based SERS aptasensor can be applied in sensitive and inexpensive detection of CEA in serum samples.

Metformin promotes the osseointegration of titanium implants under osteoporotic conditions by regulating BMSCs autophagy, and osteogenic differentiation.

Osteoporosis is a common bone disorder with adverse effects on oral osseointegration, and the effects of metformin on bone metabolism have received increasing attention. The aim of the present study was to test the hypothesis that metformin promoted osteogenesis of bone mesenchymal stem cells (BMSCs) and osseointegration of titanium implants. BMSCs were treated with metformin to assess autophagic capacity, reactive oxygen species (ROS) production, anti-aging ability, and osteogenic differentiation. To determine its potential application in peri-implant of the maxilla, metformin was injected around the implant each day, immediately after the implant was embedded into the tooth socket. The results showed that metformin increased the autophagic capacity and decreased ROS production of osteoporotic BMSCs under hypoxia and serum deprivation (H/SD) culturing conditions. Metformin treatment significantly enhanced stemness properties and mineralized nodule formation, and increased the expression of osteogenic markers, including runt related transcription factor 2 (Runx2), osteocalcin (OCN), and alkaline phosphatase (ALP). Moreover, metformin substantially accelerated the formation of new bone, ameliorated the bone microarchitecture and promoted osseointegration of the dental implant. Collectively, metformin induces an osteogenic effect around the implant. Considering the widespread use of metformin, the results of the present study might promote a novel understanding of the positive effects of local metformin delivery on alveolar ridge defect, and have potential clinical application for the acceleration of osseointegration.

Base amount-dependent fluorescence enhancement for the assay of vascular endothelial growth factor 165 in human serum using hairpin DNA-silver nanoclusters and oxidized carbon nanoparticles.

A base amount-dependent fluorescence enhancement-based strategy is put forward to determine vascular endothelial growth factor 165 (VEGF165) in human serum by the use of hairpin DNA-silver nanoclusters (hDNA-AgNCs) and oxidized carbon nanoparticles (CNPs). The hDNA-AgNCs aptasensing probe consists of AgNCs-contained hairpin loop (that generates a fluorescence signal), hairpin stem (that makes the structure stable), and the terminal aptamer 1 (that recognizes the target together with aptamer 2). It has been demonstrated that the fluorescence intensity of hDNA-AgNCs is ~ 3-fold stronger than that of single-stranded DNA-AgNCs (ssDNA-AgNCs), and hDNA-AgNCs have a strong dependence of fluorescence enhancement on the base amount in hairpin stem and loop. Upon the addition of oxidized CNPs, the terminal aptamer 1 of hDNA-AgNCs can adsorb onto the surface of oxidized CNPs via π-π stacking, and the fluorescence of hDNA-AgNCs (with excitation/emission maxima at 490/567 nm) is quenched via fluorescence resonance energy transfer (FRET). When aptamer 2 and VEGF165 are subsequently added, aptamer 1, VEGF165, and aptamer 2 reassemble into an intact tertiary structure, and the fluorescence is recovered because hDNA-AgNCs are far away from the surface of oxidized CNPs and the FRET efficiency decreases. Under the optimized conditions, the aptasensing probe can selectively assay VEGF165 with a detection limit of 14 pM. The results provide a label-free and sensitive method to monitor VEGF165 in human serum. Schematic representation of the strong dependence of fluorescence enhancement on base amount in stem and loop of hairpin DNA-silver nanoclusters. The probe can be used to assay vascular endothelial growth factor 165 (VEGF165) and give a judgment whether human serum VEGF165 is at a normal or abnormal level for clinical diagnosis.

Fluorescent turn-on assay of C-type natriuretic peptide using a molecularly imprinted ratiometric fluorescent probe with high selectivity and sensitivity.

A novel molecularly imprinted ratiometric fluorescent probe was fabricated by simple sol-gel polymerization for selective and sensitive assay of C-type natriuretic peptide (CNP) in biosamples. Both the nitrobenzoxadiazole (NBD) and carbon dots (CDs) were located on the surface of silica, used as the detection signal and reference signal, respectively. For the turn-on-based probe, the fluorescence intensity of NBD could be quantitatively enhanced by CNP based on the strategy of photo-induced electron transfer (PET), while the fluorescence of CDs remained unchanged. The obtained probe exhibited excellent recognition selectivity and fast kinetics to CNP templates, and also showed good stability. The linear range of CNP determination was 5-80 pg mL-1 with a low detection limit of 2.87 pg mL-1. Finally, the probe was successfully applied to determine CNP in human serum samples and attained high recoveries between 97.3 and 104% with precisions below 4.7%. The result indicates that the proposed method has promising potential for the assay of trace peptides in complex matrices. Schematic illustration for the formation and determination mechanism of the probe.

Ratiometric fluorescent test pen filled with a mixing ink of carbon dots and CdTe quantum dots for portable assay of silver ion on paper.

A ratiometric fluorescent test pen filled with a mixing ink of blue carbon dots (CDs) and red CdTe quantum dots (CdTe QDs) is introduced for portable assay of silver ion (Ag(I)) on paper. The mixing ink was tuned with ratiometric fluorescent intensity of 1:5, and then filled into a vacant commercial fluorescent pen core. Writing/painting a random word/figure on a blank paper can make the most portable nanoprobe determining Ag(I) by visualization. Ag(I) can adsorb onto the surface of CdTe QDs, which leads to the formation of surficial Ag2Te layer by an ion-exchanging reaction. This enables the red fluorescence of CdTe QDs (with excitation/emission maxima at 360/628 nm) to be quenched. Due to the unchanged blue fluorescence of CDs (with excitation/emission maxima at 360/440 nm) as internal standard, the solution color evolves gradually from red to blue with the increase of Ag(I) concentration with a detection limit of 3.48 nM. This is at least 2 orders of magnitude lower than the limit defined by World Health Organization (WHO) in drinkable water. The fluorescent test pen has also been used for the determination of Ag(I) in wastewater. Graphical abstract Ag(I) can adsorb on the surface of CdTe QDs to quench their fluorescence, while the fluorescent intensity of CDs keep constant, accompanying color change with the increase of Ag(I) concentration. The method offers a visual assay of Ag(I) in water.

Colorimetric and visual detection of mercury(II) based on the suppression of the interaction of dithiothreitol with agar-stabilized silver-coated gold nanoparticles.

A colorimetric and visual method is described for the determination of mercury(II) ion. A gel consisting of agar-stabilized silver-coated gold nanoparticles (Au@Ag NPs) was prepared. The reaction with dithiothreitol (DTT) via thiol-Ag chemistry results in an orange to purple color change of the gel. However, in the presence of Hg(II), the reaction of DTT with the silver shells is suppressed due to the strong thiophilicity of Hg(II). The color of the gel changes from purple to red to orange in the presence of increasing concentrations of Hg(II). The Au@Ag NPs therefore are a viable optical probe for Hg(II) which can be detected in concentration as low as 78 nM via dual-wavelength ratiometric absorbance (A390/A520), and at 1 µM levels with bare eyes. The use of agar as a support is mandatory to prevent the aggregation of the NPs and also improves selectivity. The method was applied to the analysis of spiked samples, and recoveries ranged between 96.3 and 104%. The assay is easy, inexpensive, and in our perception represents an attractive tool for on-site visual detection of Hg(II). Graphical abstract Schematic of the assay. With increasing concentrations of Hg(II), the oxidative etching of silver shells caused by dithiothreitol (DTT) is gradually inhibited, and the color of agar-stabilized Au@Ag NP gel varies from purple to red, and finally to orange. This can be used for visual detection of Hg(II).

A split aptamer-labeled ratiometric fluorescent biosensor for specific detection of adenosine in human urine.

A dual-emission ratiometric fluorometric aptasensor is presented for highly specific detection of adenosine. An adenosine binding aptamer (ABA) was split into two halves (termed as ABA1 and ABA2). ABA1 was covalently bound to blue-emitting carbon dots (with excitation/emission maxima at 365/440 nm) as responsive fluorophore (referred to as ABA1-CDs). ABA2 was linked to red-emitting silica-coated CdTe quantum dots (with excitation/emission maxima at 365/613 nm) acting as internal reference and referred to as ABA2-QDs@SiO2. Upon addition of graphene oxide, the fluorescence of ABA1-CDs is quenched. After subsequent addition of ABA2-QDs@SiO2 and different amounts of adenosine, the blue fluorescence is recovered and causes a color change from red to royal blue. The method represents a ratiometric turn-on assay for visual, colorimetric and fluorometric determination of adenosine. The limit of detection is as low as 2.4 nM in case of ratiometric fluorometry. The method was successfully applied to the determination of adenosine in (spiked) human urine. Recoveries range from 98.8% to 102%. Graphical abstract Adenosine binding aptamer1-carbon dots (ABA1-CDs) can absorb on graphene oxide (GO) via π stacking. This causes fluorescence to be quenched by fluorescence resonance energy transfer (FRET). After addition of ABA2-silica-coated quantum dots (ABA2-QDs@SiO2) and adenosine, binding of adenosine to two pieces of aptamers forms a complex (ABA1-CD/adenosine/ABA2-QD@SiO2) which dissociates from GO. As a result, fluorescence is recovered.

Ehrlich Reaction Evoked Multiple Spectral Resonances and Gold Nanoparticle Hotspots for Raman Detection of Plant Hormone.

Surface-enhanced Raman scattering (SERS) by use of noble metal nanoparticles has become a powerful tool to determine a low-concentration target by unique spectral fingerprints, but it is still limited to the Raman-inactive and nonresonant biomolecules such as amine acids, proteins, and hormones. Here, we report an Ehrlich reaction based derivative strategy in combination with gold nanoparticles (Au NPs) hotspots for the selective detection of indole-like plant hormones by SERS spectroscopy. Ehrlich reaction of p-(dimethylamino)benzaldehyde (PDAB) with the indole ring chemically transformed plant hormone indole-3-butyric acid (IBA) into a Raman-active and resonant derivative with an extended π-conjugated system in the form of a cation, which produced a new absorption band at 626 nm. On the other hand, cationic IBA-PDAB highly evoked the aggregation of Au NPs with negative citrate ligands to form the effective Raman hotspots and gave rise to the new absorption ranging from 600 to 800 nm. Significantly, the spectral overlap among IBA-PDAB, aggregated Au NPs, and the exciting laser initiated the multiple optical resonances to generate the ultrahigh Raman scattering with a sensitive limit of 2.0 nM IBA. The IBA in the whole sprouts and various parts of pea, mungbean, soybean, and black bean has been identified and quantified. The reported method opens a novel avenue for the SERS detection of Raman-inactive analyte by a proper derivation.

A general method to regenerate arrayed gold microelectrodes for label-free cell assay.

We developed a method to regenerate arrayed gold microelectrodes equipped for a commercial label-free cell analyzer. The regeneration process includes efficient treatment of the gold surface with trypsin (0.25%, v/v) digestion, rinsing with ethanol and deionized water and spinning steps. The proposed method ensured complete regeneration and repeated usage of gold microchips up to 4 times for the real-time electric impedance measurement of anti-cancer drug cytotoxicity.

Neuroprotective Activity of Cerebrosides from Typhonium giganteum by Regulating Caspase-3 and Bax/Bcl-2 Signaling Pathways in PC12 Cells.

An investigation of the potential neuroprotective natural product constituents of the rhizomes of Typhonium giganteum led to the isolation of two new cerebrosides, typhonosides E (1) and F (2), along with 11 known analogues (3-13). The structures of compounds 1 and 2 were elucidated by spectroscopic data interpretation. The activity of these compounds against glutamate-induced cell apoptosis was investigated in PC12 cells. All compounds exhibited such activity, which was related to the length of the fatty acyl chain. Among them, longan cerebroside II (11), with the longest fatty acyl chain, showed the most potent protective effect in PC12 cells from glutamate injury, with an EC50 value of 2.5 µM. Moreover, at the molecular level, longan cerebroside II (11) downregulated the expression of caspase-9, caspase-3, and Bax, upregulated the expression of Bcl-2, and decreased the level of cytosolic cytochrome c in a concentration-dependent manner.

Color-Multiplexing-Based Fluorescent Test Paper: Dosage-Sensitive Visualization of Arsenic(III) with Discernable Scale as Low as 5 ppb.

Fluorescent colorimetry test papers are promising for the assays of environments, medicines, and foods by the observation of the naked eye on the variations of fluorescence brightness and color. Unlike dye-absorption-based pH test paper, however, the fluorescent test papers with wide color-emissive variations with target dosages for accurate quantification remain unsuccessful even if the multicolorful fluorescent probes are used. Here, we report the dosage-sensitive fluorescent colorimetry test paper with a very wide/consecutive "from red to cyan" response to the presence and amount of arsenic ions, As(III). Red quantum dots (QDs) were modified with glutathione and dithiothreitol to obtain the supersensitivity to As(III) by the quenching of red fluorescence through the formation of dispersive QDs aggregates. A small amount of cyan carbon dots (CDs) with spectral blue-green components as the photostable internal standard were mixed into the QDs solution to produce a composited red fluorescence. Upon the addition of As(III) into the sensory solution, the fluorescence color could gradually be reversed from red to cyan with a detection limit of 1.7 ppb As(III). When the sensory solution was printed onto a piece of filter paper, surprisingly a serial of color evolution from peach to pink to orange to khaki to yellowish to yellow-green to final cyan with the addition of As(III) was displayed and clearly discerned the dosage scale as low as 5 ppb. The methodology reported here opens a novel pathway toward the real applications of fluorescent test papers.

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis.

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid-phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high-performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI-removed SB extract was obtained by one-step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines.

Ligand Replacement Approach to Raman-Responded Molecularly Imprinted Monolayer for Rapid Determination of Penicilloic Acid in Penicillin.

Penicilloic acid (PA) is a degraded byproduct of penicillin and often causes fatal allergies to humans, but its rapid detection in penicillin drugs remains a challenge due to its similarity to the mother structure of penicillin. Here, we reported a ligand-replaced molecularly imprinted monolayer strategy on a surface-enhanced Raman scattering (SERS) substrate for the specific recognition and rapid detection of Raman-inactive PA in penicillin. The bis(phenylenediamine)-Cu(2+)-PA complex was first synthesized and stabilized onto the surface of silver nanoparticle film that was fabricated by a bromide ion-added silver mirror reaction. A molecularly imprinted monolayer was formed by the further modification of alkanethiol around the stabilized complex on the Ag film substrate, and the imprinted recognition site was then created by the replacement of the complex template with Raman-active probe molecule p-aminothiophenol. When PA rebound into the imprinted site in the alkanethiol monolayer, the SERS signal of p-aminothiophenol exhibited remarkable enhancement with a detection limit of 0.10 nM. The imprinted monolayer can efficiently exclude the interference of penicillin and thus provides a selective determination of 0.10‰ (w/w) PA in penicillin, which is about 1 order of magnitude lower than the prescribed residual amount of 1.0‰. The strategy reported here is simple, rapid and inexpensive compared to the traditional chromatography-based methods.

Molecularly imprinted polymers based on SBA-15 for selective solid-phase extraction of baicalein from plasma samples.

Highly selective molecularly imprinted mesoporous silica polymer (SBA-15@MIP) for baicalein (BAI) extraction was synthesized using a surface molecular imprinting technique on the SBA-15 supporter. Computational simulation was used to predict the optimal functional monomer for the rational design of SBA-15@MIP. Meanwhile, high adsorption capacity was obtained when a suitable yield of molecularly imprinted polymers (MIPs) layer was grafted onto the surface of SBA-15. Characterization and performance tests of the obtained polymer revealed that SBA-15@MIP possessed a highly ordered mesoporous structure, reached saturated adsorption within 60 min, and exhibited higher sorption capacity to the target molecule BAI compared with non-imprinted mesoporous silica polymer (SBA-15@NIP) and SBA-15. Finally, SBA-15@MIP was successfully applied to solid-phase extraction (SPE) coupled with high-performance liquid chromatography and ultraviolet detection (HPLC-UV) for the determination of trace BAI in plasma samples. Mean recoveries of BAI through the molecularly imprinted solid-phase extraction (MISPE) sorbent, non-imprinted solid-phase extraction (NISPE) sorbent, and SBA-15 solid-phase extraction (SBA-15-SPE) sorbent were 94.4, 22.7, and 10.7 %, respectively, and the relative standard deviations were 2.9, 2.6, and 3.6 %, respectively. These results reveal that SBA-15@MIP as a SPE sorbent has good applicability to selectively separate and enrich trace BAI from complex samples.

Label-free surface-enhanced Raman scattering imaging to monitor the metabolism of antitumor drug 6-mercaptopurine in living cells.

The molecular processes of drugs from cellular uptake to intracellular distribution as well as the intracellular interaction with the target molecule are critically important for the development of new antitumor drugs. In this work, we have successfully developed a label-free surface-enhanced Raman scattering (SERS) technique to monitor and visualize the metabolism of antitumor drug 6-mercaptopurine in living cells. It has been clearly demonstrated that Au@Ag NPs exhibit an excellent Raman enhancement effect to both 6-mercaptopurine and its metabolic product 6-mercaptopurine-ribose. Their different ways to absorb at the surface of Au@Ag NPs lead to the obvious spectral difference for distinguishing the antitumor drug and its metabolite by SERS spectra. The Au@Ag NPs can easily pass through cell membranes in a large amount and sensitively respond to the biological conversion of 6-mercaptopurine in tumor cells. The Raman imaging can visualize the real-time distribution of 6-mercaptopurine and its biotransformation with the concentrations in tumor cells. The SERS-based method reported here is simple and efficient for the assessments of drug efficacy and the understanding of the molecular therapeutic mechanism of antitumor drugs at the cellular level.

Gint4.T-siHDGF chimera-capped mesoporous silica nanoparticles encapsulating temozolomide for synergistic glioblastoma therapy.

Due to glioblastoma (GBM) being the most intractable brain tumor, the continuous improvement of effective treatment methods is indispensable. The combination of siRNA-based gene therapy and chemotherapy for GBM treatment has now manifested great promise. Herein, Gint4.T-siHDGF chimera-capped mesoporous silica nanoparticles (MSN) encapsulating chemotherapy drug temozolomide (TMZ), termed as TMSN@siHDGF-Gint4.T, is developed to co-deliver gene-drug siHDGF and TMZ for synergistic GBM therapy. TMSN@siHDGF-Gint4.T possesses spherical nucleic acid-like architecture that can improve the enzyme resistance of siHDGF and increase the blood-brain barrier (BBB) permeability of the nanovehicle. The aptamer Gint4.T of chimera endows the nanovehicle with GBM cell-specific binding ability. When administered systemically, TMSN@siHDGF-Gint4.T can traverse BBB and enter GBM cells. In the acidic lysosome environment, the cleavage of benzoic-imine bond on MSN surface leads to an initial rapid release of chimera, followed by a slow release of TMZ encapsulated in MSN. The sequential release of siHDGF and TMZ first allows siHDGF to exert its gene-silencing effect, and the downregulation of HDGF expression further enhances the cytotoxicity of TMZ. In vivo experimental results have demonstrated that TMSN@siHDGF-Gint4.T significantly inhibits tumor growth and extends the survival time of GBM-bearing mice. Thus, the as-developed TMSN@siHDGF-Gint4.T affords a potential approach for the combination treatment of GBM.

A novel bellidifolin intervention mitigates nonalcoholic fatty liver disease-like changes induced by bisphenol F.

As a potential endocrine-disrupting chemical, bisphenol F (BPF) may cause nonalcoholic fatty liver disease (NAFLD)-like changes, but the mechanisms underpinning its pathogenesis as well as the intervention strategies remain poorly understood. Using the electron microscopy technology, along with LipidTOX Deep Red neutral and Bodipy 493/503 staining assays, we observed that BPF treatment elicited a striking accumulation of lipid droplets in HepG2 cells, accompanied by an increased total level of triglycerides. At the molecular level, the lipogenesis-associated mRNAs and proteins, including acetyl-CoA carboxylase, fatty acid synthase, stearoyl-CoA desaturase-1, peroxisome proliferator-activated receptor gamma, and CCAAT-enhancer-binding proteins, increased significantly via the AMP-activated protein kinase (AMPK)-mammalian target of rapamycin (mTOR) signaling regulation in both in vitro and in vivo studies. Furthermore, the immunofluorescence results also showed the robust lipogenesis induced by BPF, evident in its ability to promote the translocation of sterol regulatory element-binding protein-1c from the cytoplasm to the nuclei. To investigate the intervention strategies for BPF-induced NAFLD-like changes, we demonstrated that bellidifolin, isolated and purified from Swertia chirayita, significantly attenuated BPF-induced lipid droplet deposition in HepG2 cell and NAFLD-like changes in mice by blocking the expression of lipogenesis-associated proteins. Therefore, the present study elucidates the mechanisms underlying BPF-induced lipid accumulation in HepG2 cells, while also highlighting the potential of bellidifolin to mitigate BPF-induced NAFLD-like changes.

Molecularly imprinted layer-coated monodisperse spherical silica microparticles toward affinity-enrichment of isoflavonoid glycosides from Radix puerariae.

This paper reports the preparation of puerarin (PR) imprinted layer-coated silica microparticles toward selective recognition of PR and fast affinity-enrichment of the main isoflavonoid glycosides from the crude extract of Radix puerariae. Before the preparation, quantum mechanics (QM) method was applied to identify three kinds of common functional monomers capable of interaction with PR and then predicted optimal functional monomer (acrylamide, AA) and the relative molar ratio of template to functional monomer (PR/AA, 1:4). The obtained PR-imprinted silica microparticles were evaluated by transmission electron microscope (TEM) and rebinding experiments, exhibiting good morphology and high binding affinity to PR. Meanwhile, the rebinding amount of the imprinted microparticles to PR was nearly 2.1-folds that of non-imprinted microparticles. When the PR-imprinted microspheres were used as packing materials for solid-phase extraction, the recovery yields of PR, daidzin (DD) and genistin (GS) were simultaneously up to 90% by one-step extraction from the crude extract of Radix puerariae. Additionally, the PR-imprinted microparticles could be re-used for at least 5 times without losing any extraction efficiency. These results indicate that the PR-imprinted microparticles have highly selective adsorption capabilities to PR, DD and GS from the crude extract of Radix puerariae. The method of molecularly imprinted polymers (MIPs) coupled with solid-phase extraction (SPE) provides a good solution of the enrichment and separation of active extracts from complicated traditional Chinese medicine (TCM) with certain structures.

Rational design of core-shell molecularly imprinted polymer based on computational simulation and Doehlert experimental optimization: application to the separation of tanshinone IIA from Salvia miltiorrhiza Bunge.

Computational simulation and Doehlert experimental optimization were done for the rational design of a core-shell molecularly imprinted polymer (CS-MIP) for use in the highly selective separation of Tanshinone IIA (TSIIA) from the crude extracts of Salvia miltiorrhiza Bunge (SMB). The functional monomer layer of the polymer shells directed the selective occurrence of imprinting polymerization at the surface of silica through the copolymerization of vinyl end groups with functional monomers and also drove TSIIA templates into the formed polymer shells through the charge-transfer complex interactions between TSIIA and the functional monomer layer. As a result, the maximum rebinding capacity was achieved with the use of optimal grafting ratio by the Doehlert design. The CS-MIP exhibited high recognition selectivity and binding affinity to TSIIA. When the imprinted particles were used as dispersive solid phase extraction sorbents, the recovery yield of TSIIA reached 93% by a one-step extraction from the crude extracts of SMB, and the purity of TSIIA was larger than 98% by HPLC analysis. These results show the possibility of a highly selective separation and enrichment of TSIIA from the SMB using the TSIIA-imprinted core-shell molecularly imprinted polymers.