RESUMO
OBJECTIVE: Activation of Lin28 gene under certain conditions promotes tissue damage repair. However, it remains unknown whether conditional expression of Lin28 facilitates the recovery of damaged pulp tissue. In the study, we focus on exploring the effects and possible regulatory mechanisms of Lin28 on the proliferation and differentiation of human dental pulp stem cells (hDPSCs). MATERIALS AND METHODS: We adopted techniques such as the ethynyl-2'-deoxyuridine (EdU) incorporation assay, RNA-protein immunoprecipitation (RIP) analysis, and luciferase assays to study the regulation of hDPSCs by Lin28. Furthermore, gain-of-function and loss-of-function analyses were also used in explored factors regulating hDPSCs activation. RESULTS: The results show that Lin28 inhibited osteogenic differentiation by directly targets pre-let-7b. Through bioinformatics sequencing and dual luciferase experiments we learned that let-7b directly targets the IGF2BP2 3'UTR. Silencing of IGF2BP2 showed a similar biological effect as overexpression of let-7b. Overexpression of IGF2BP2 counteracted the differentiation-promoting effects produced by let-7b overexpression. DISCUSSION/CONCLUSIONS: In conclusion, the RNA-binding protein Lin28 regulates osteogenic differentiation of hDPSCs by inhibiting let-7 miRNA maturation. And mature let-7b directly regulated the expression of IGF2BP2 by targeting the 3'UTR region of IGF2BP2 mRNA thus further inhibiting the differentiation of hDPSCs.
RESUMO
Fibronectin adsorption on biomaterial surfaces plays a key role in the biocompatibility of biomedical implants. In the current study, the adsorption behavior of the 7-10th type III modules of fibronectin (FN-III7-10) in the presence of hydroxyapatite (HAP) was systematically investigated by using molecular docking approach. It was revealed that the FN-III10 is the most important module among FN-III7-10 in promoting fibronectin binding to HAP by optimizing the interaction energy; the arginine residues were observed to directly interact with the hydroxyl group of HAP through electrostatic forces and hydrogen bonding. Moreover, it was found that the HAP-binding sites on FN-III10 are mainly located at the RGD loop region, which does not affect the interaction between the fibronectin protein and its cognate receptors on the cell surface.
Assuntos
Durapatita/química , Fibronectinas/química , Simulação de Acoplamento Molecular , Oligopeptídeos/química , Domínios e Motivos de Interação entre Proteínas , Sítios de Ligação , Durapatita/metabolismo , Fibronectinas/metabolismo , Humanos , Simulação de Dinâmica Molecular , Ligação ProteicaRESUMO
The ability of calcium phosphate (CaP) materials to induce bone formation varies with their physicochemical properties, with surface topography as one of the most crucial triggers. In view of the natural wound healing processes (e.g., inflammation, angiogenesis, tissue formation and remodeling) initiated after surgical implantation, we here comparatively investigated the biological cascades occurring upon ectopic implantation of a tricalcium phosphate with submicron surface topography (TCP-S, osteoinductive) and a tricalcium phosphate with micron-scale topography (TCP-B, non-osteoinductive). In vitro, TCP-S facilitated M2 polarization of macrophages derived from a human leukemic cell line (THP-1) as shown by the enhanced secretion of TGF-ß and CCL18. Interestingly, the conditioned media of polarized M2 macrophages on TCP-S enhanced tube formation by human umbilical vein endothelial cells (HUVECs), while had no influence on the osteogenic differentiation of human bone marrow stromal cells (HBMSCs). Following an intramuscular implantation in canines, TCP-S locally increased typical M2 macrophage markers (e.g., IL-10) at week 1 to 3 and enhanced blood vessel formation after week 3 as compared to TCP-B. Bone formation was observed histologically in TCP-S 6 weeks after implantation, and bone formation was inhibited when an angiogenesis inhibitor (KRN633) was loaded onto TCP-S. No bone formation was observed for TCP-B. The data presented herein suggest strong links between macrophage polarization, angiogenesis and CaP-induced bone formation. STATEMENT OF SIGNIFICANCE: The ability of calcium phosphate (CaP) materials to induce bone formation varies with their physicochemical properties, and the key physicochemical properties relevant to CaP-induced bone formation have been outlined in the last two decades. However, the biological mechanism underlying this material-driven osteoinduction remains largely unknown. This manuscript presented demonstrates strong links between surface topography, macrophage polarization, angiogenesis and bone formation in CaP materials implanted in non-osseous sites. The finding may provide new clues for further exploring the possible mechanism underlying osteoinduction by CaP materials.
Assuntos
Células-Tronco Mesenquimais , Osteogênese , Animais , Fosfatos de Cálcio , Cães , Humanos , Macrófagos , FenótipoRESUMO
Tricalcium phosphate (TCP) ceramics are used as bone void fillers because of their bioactivity and resorbability, while their performance in bone regeneration and material resorption vary with their physical properties (e.g., the dimension of the crystal grain). Herein, three TCP ceramic bone substitutes (TCP-S, TCP-M, and TCP-L) with gradient crystal grain size (0.77 ± 0.21 µm for TCP-S, 1.21 ± 0.35 µm for TCP-M and 4.87 ± 1.90 µm for TCP-L), were evaluated in a well-established rabbit lateral condylar defect model (validated with sham) with respect to bone formation and material resorption up to 26 weeks. Surface structure-dependent bone regeneration was clearly shown after 4 weeks implantation with TCP-S having most mineralized bone (20.2 ± 3.4%), followed by TCP-M (14.0 ± 3.5%), sham (8.1 ± 4.2%), and TCP-L (6.6 ± 2.6%). Afterward, the amount of mineralized bone was similar in all the three groups, but bone marrow and material resorption varied. After 26 weeks, TCP-S induced most bone tissue formation (mineralized bone + bone marrow) (61.6 ± 7.8%) and underwent most material resorption (80.1 ± 9.0%), followed by TCP-M (42.9 ± 5.2% and 61.4 ± 8.0% respectively), TCP-L (28.3 ± 5.5% and 45.6 ± 9.7% respectively), and sham (25.7 ± 4.2%). Given the fact that the three ceramics are chemically identical, the results indicate that the surface structure (especially, the crystal grain size) of TCP ceramics can greatly tune their bone regeneration potential and the material resorption in rabbit condyle defect model, with the submicron surface structured TCP ceramic performing the best.
RESUMO
As spinal fusions require large volumes of bone graft, different bone graft substitutes are being investigated as alternatives. A subclass of calcium phosphate materials with submicron surface topography has been shown to be a highly effective bone graft substitute. In this work, a commercially available biphasic calcium phosphate (BCP) with submicron surface topography (MagnetOs; Kuros Biosciences BV) was evaluated in an Ovine model of instrumented posterolateral fusion. The material was implanted stand-alone, either as granules (BCPgranules) or as granules embedded within a fast-resorbing polymeric carrier (BCPputty) and compared to autograft bone (AG). Twenty-five adult, female Merino sheep underwent posterolateral fusion at L2-3 and L4-5 levels with instrumentation. After 6, 12, and 26 weeks, outcomes were evaluated by manual palpation, range of motion (ROM) testing, micro-computed tomography, histology and histomorphometry. Fusion assessment by manual palpation 12 weeks after implantation revealed 100% fusion rates in all treatment groups. The three treatment groups showed a significant decrease in lateral bending at the fusion levels at 12 weeks (P < 0.05) and 26 weeks (P < 0.001) compared to the 6 week time-point. Flexion-extension and axial rotation were also reduced over time, but statistical significance was only reached in flexion-extension for AG and BCPputty between the 6 and 26 week time-points (P < 0.05). No significant differences in ROM were observed between the treatment groups at any of the time-points investigated. Histological assessment at 12 weeks showed fusion rates of 75%, 92%, and 83% for AG, BCPgranules and BCPputty, respectively. The fusion rates were further increased 26 weeks postimplantation. Similar trends of bone growth were observed by histomorphometry. The fusion mass consisted of at least 55% bone for all treatment groups 26 weeks after implantation. These results suggest that this BCP with submicron surface topography, in granules or putty form, is a promising alternative to autograft for spinal fusion.
RESUMO
Because of their bioactive properties and chemical similarity to the inorganic component of bone, calcium phosphate (CaP) materials are widely used for bone regeneration. Six commercially available CaP bone substitutes (Bio-Oss, Actifuse, Bi-Ostetic, MBCP, Vitoss and chronOs) as well as two tricalcium phosphate (TCP) ceramics with either a micron-scale (TCP-B) or submicron-scale (TCP-S) surface structure are characterized and their bone forming potential is evaluated in a canine ectopic implantation model. After 12 weeks of implantation in the paraspinal muscle of four beagles, sporadic bone (0.1 ± 0.1%) is observed in two Actifuse implants (2/4), limited bone (2.1 ± 1.4%) in four MBCP implants (4/4) and abundant bone (21.6 ± 4.5%) is formed in all TCP-S implants (4/4). Bone is not observed in any of the Bio-Oss, Bi-Ostetic, Vitoss, chronOs and TCP-B implants (0/4). When correlating the bone forming potential with the physicochemical properties of each material, we observe that the physical characteristics (e.g. grain size and micropore size at the submicron scale) might be the dominant trigger of material directed bone formation via specific mechanotransduction, instead of protein adsorption, surface mineralization and calcium ion release.
Assuntos
Substitutos Ósseos/química , Fosfatos de Cálcio/química , Animais , Cães , Mecanotransdução CelularRESUMO
Calcium phosphate ceramics with submicron-scaled surface structure can trigger bone formation in non-osseous sites and are expected to enhance bone formation in spine environment. In this study, two tricalcium phosphate ceramics having either a submicron-scaled surface structure (TCP-S) or a micron-scaled one (TCP-B) were prepared and characterized regarding their physicochemical properties. Granules (size 1-2 mm) of both materials were implanted on either left or right side of spinous process, between the two lumbar vertebrae (L3-L4), and in paraspinal muscle of eight beagles. After 12 weeks of implantation, ectopic bone was observed in muscle in TCP-S explants (7.7 ± 3.7%), confirming their ability to inductively form bone in non-osseous sites. In contrast, TCP-B implants did not lead to bone formation in muscle. Abundant bone (34.1 ± 6.6%) was formed within TCP-S implants beside the two spinous processes, while limited bone (5.1 ± 4.5%) was seen in TCP-B. Furthermore, the material resorption of TCP-S was more pronounced than that of TCP-B in both the muscle and spine environments. The results herein indicate that the submicron-scaled surface structured tricalcium phosphate ceramic could enhance bone regeneration as compared to the micron-scaled one in spine environment. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1865-1873, 2016.
Assuntos
Regeneração Óssea/efeitos dos fármacos , Fosfatos de Cálcio/uso terapêutico , Cerâmica/química , Próteses e Implantes , Doenças da Coluna Vertebral/terapia , Animais , Fosfatos de Cálcio/farmacologia , Cães , MasculinoRESUMO
Strontium (Sr) has been shown to favor bone formation and is used clinically to treat osteoporosis. We have previously reported that Sr addition in apatite/polylactide composites could enhance the BMP-induced bone formation around implants at ectopic site in healthy animals. In this study we aimed to investigate the effectiveness of Sr addition on the local bone formation in osteoporosis. Apatite/polylactide composite granules with different Sr content were loaded with equal amount of rhBMP-2 and implanted intramuscularly in healthy rabbits (Con) and rabbits that received bilateral ovariectomy and daily injection of glucocorticoid (OP) for 12 weeks. The potential effect of Sr on the final volume of BMP-induced bone in both groups was investigated histologically and histomorphometrically. The de novo bone formed in OP implants was significantly less than in Con group when the implants contained no Sr, indicating that the BMP-induced osteogenesis was impaired in OP animals. Sr substitution as low as 0.5 mol% in apatite increased the bone volume in OP implants to levels comparable to that in the Con group, indicating a positive effect of Sr addition on the local bone formation in OP animals. In addition, more adipose tissue formed in parallel with the appearance of cartilage tissue in OP implants, suggesting that the differentiation potential of stem cell in OP animals may have shifted towards adipogenesis and chondrogenesis. From these results, we conclude that the use of Sr addition to enhance the bone growth surrounding implants in osteoporosis merits further study. STATEMENT OF SIGNIFICANCE: The impaired bone healing capacity of osteoporotic patients might result in poor osteointegration and surgical failure in case implants are placed. In this study we aimed to enhance the bone formation around implants under such scenario by adding strontium as the stimulus. Different from other studies, the samples were loaded with rhBMP-2 and implanted at an ectopic site (spinal muscles of New Zealand rabbits) to exclude the influence of conductive bone repair. The results showed that the addition of strontium could enhance the BMP-2-induced bone formation on implants in osteopenic rabbits to levels comparable to that in healthy rabbits. Secondarily, we observed more adipose tissue and cartilage tissue in osteopenic implants, suggesting the role of adipogenesis and chondrogenesis in osteopenia/osteoporosis.
Assuntos
Apatitas/química , Doenças Ósseas Metabólicas/tratamento farmacológico , Doenças Ósseas Metabólicas/patologia , Nanocompostos/administração & dosagem , Poliésteres/química , Estrôncio/administração & dosagem , Animais , Doenças Ósseas Metabólicas/fisiopatologia , Feminino , Nanocápsulas/administração & dosagem , Nanocápsulas/química , Nanocompostos/química , Osteogênese/efeitos dos fármacos , Coelhos , Estrôncio/química , Resultado do TratamentoRESUMO
Vascularized bone grafts were constructed by implanting hydroxyapatite (HA) scaffolds with complementary macro-pore structures into the dorsal muscle of dogs. The relationship between pore structures and ectopic bone formation properties was investigated. Two types of scaffolds with complementary porous structures were fabricated by spherulite-accumulating and porogen-preparing methods, and were named spherulite HA-positive and porogen HA-negative, respectively. After implantation for 1 month, histological observation showed that all the scaffolds were encapsulated by normal muscle tissue and multiple vascular net with cells, indicating excellent biocompatibility and pore interconnectivity of the scaffolds. In the spherulite HA-positive scaffolds, a number of osteoclasts and osteoblasts coupled with new bone tissues were found after 3 and 6 months' implantations, which was better than those in the porogen HA-negative scaffolds. Similarly, the improvement of mechanical properties and the reconstruction of materials in the spherulite HA-positive scaffolds were superior to those in the porogen HA-negative scaffolds. The different ectopic bone formation induced by different macro-pore structures after intramuscular implantation demonstrated the significant effect of macro-pore structures of scaffolds on osteoinduction and vascularization.