Simulation of winter wheat response to variable sowing dates and densities in a high-yielding environment.

Crop multi-model ensembles (MME) have proven to be effective in increasing the accuracy of simulations in modelling experiments. However, the ability of MME to capture crop responses to changes in sowing dates and densities has not yet been investigated. These management interventions are some of the main levers for adapting cropping systems to climate change. Here, we explore the performance of a MME of 29 wheat crop models to predict the effect of changing sowing dates and rates on yield and yield components, on two sites located in a high-yielding environment in New Zealand. The experiment was conducted for 6 years and provided 50 combinations of sowing date, sowing density and growing season. We show that the MME simulates seasonal growth of wheat well under standard sowing conditions, but fails under early sowing and high sowing rates. The comparison between observed and simulated in-season fraction of intercepted photosynthetically active radiation (FIPAR) for early sown wheat shows that the MME does not capture the decrease of crop above ground biomass during winter months due to senescence. Models need to better account for tiller competition for light, nutrients, and water during vegetative growth, and early tiller senescence and tiller mortality, which are exacerbated by early sowing, high sowing densities, and warmer winter temperatures.

Projecting the impacts of climate change on skipjack tuna abundance and spatial distribution.

Climate-induced changes in the physical, chemical, and biological environment are expected to increasingly stress marine ecosystems, with important consequences for fisheries exploitation. Here, we use the APECOSM-E numerical model (Apex Predator ECOSystem Model - Estimation) to evaluate the future impacts of climate change on the physiology, spatial distribution, and abundance of skipjack tuna, the worldwide most fished species of tropical tuna. The main novelties of our approach lie in the mechanistic link between environmental factors, metabolic rates, and behavioral responses and in the fully three dimensional representation of habitat and population abundance. Physical and biogeochemical fields used to force the model are provided by the last generation of the IPSL-CM5 Earth System Model run from 1990 to 2100 under a 'business-as-usual' scenario (RCP8.5). Our simulations show significant changes in the spatial distribution of skipjack tuna suitable habitat, as well as in their population abundance. The model projects deterioration of skipjack habitat in most tropical waters and an improvement of habitat at higher latitudes. The primary driver of habitat changes is ocean warming, followed by food density changes. Our projections show an increase of global skipjack biomass between 2010 and 2050 followed by a marked decrease between 2050 and 2095. Spawning rates are consistent with population trends, showing that spawning depends primarily on the adult biomass. On the other hand, growth rates display very smooth temporal changes, suggesting that the ability of skipjack to keep high metabolic rates in the changing environment is generally effective. Uncertainties related to our model spatial resolution, to the lack or simplification of key processes and to the climate forcings are discussed.

Modeling the implications of policy reforms on pesticide risk for Switzerland.

Growing public awareness of the negative effects of pesticides on the environment, ecosystems, and human health has led governments to set targets for reducing pesticide risk. Switzerland introduced in 2023 two new policy measures to reduce pesticide risk by 50 % by 2027: (1) voluntary direct payment programs supporting pesticide-reduced and pesticide-free but non-organic cropping systems for most crops on arable land, and (2) restrictions of harmful pesticides for farmers managing under Swiss cross-compliance standards. This study aims to (1) develop a method to assess pesticide risk on a national scale and (2) carry out an ex-ante impact assessment to predict whether these policies can effectively reduce pesticide risks in Switzerland. Therefore, we introduced crop-specific pesticide quantities and pesticide risk scores into a sample of 1907 bio-economic farm optimization models. The models were used to predict farmers' adoption decisions regarding voluntary direct payment programs from 2019 to 2030. By combining the bio-economic farm optimization models with an agent-based modeling approach, we assessed the evolution of pesticide-related risks at the national level. Simulations for pesticide risk from 2019 to 2022 reflected the observed pesticide risk monitored by the Swiss government. In surface waters and semi-natural habitats, achieving the target depends on reducing pyrethroids, a class of insecticides with high-risk potential. Further, we highlight significant uncertainty in projecting the risk potential for surface waters and semi-natural habitats due to uncertainty about the amounts of pyrethroid used for different crops. The results underline the need for comprehensive datasets on pesticide use in Switzerland.

Joint effects of nutrients and contaminants on the dynamics of a food chain in marine ecosystems.

We analyze the joint effect of contaminants and nutrient loading on population dynamics of marine food chains by means of bifurcation analysis. Contaminant toxicity is assumed to alter mortality of some species with a sigmoidal dose-response relationship. A generic effect of pollutants is to delay transitions to complex dynamical states towards higher nutrient load values, but more counterintuitive consequences arising from indirect effects are described. In particular, the top predator seems to be the species more affected by pollutants, even when contaminant is toxic only to lower trophic levels.

On the use of the partitioning approach to derive Environmental Quality Standards (EQS) for persistent organic pollutants (POPs) in sediments: a review of existing data.

A review of experimental data has been performed to study the relationships between the concentration in water, pore water and sediments for different families of organic contaminants. The objective was to determine whether it is possible to set EQS for sediments from EQS defined for surface waters in the Daughter Directive of the European Parliament (COM (2006) 397). The analysis of experimental data showed that even though in some specific cases there is a coupling between water column and sediments, this coupling is rather the exception. Therefore it is not recommendable to use water column data to assess the chemical quality status of sediments and it is necessary to measure in both media. At the moment EQS have been defined for the water column and will assess only the compliance with good chemical status of surface waters. Since the sediment toxicity depends on the dissolved pore water concentration, the EQS developed for water could be applied to pore water (interstitial water); hence, there would be no need of developing another set of EQS. The partitioning approach has been proposed as a solution to calculate sediment EQS from water EQS, but the partitioning coefficient strongly depends on sediment characteristics and its use introduces an important uncertainty in the definition of sediment EQS. Therefore, the direct measurement of pore water concentration is regarded as a better option.

Implementation of a 3D coupled hydrodynamic and contaminant fate model for PCDD/Fs in Thau Lagoon (France): the importance of atmospheric sources of contamination.

A 3D hydrodynamic and contaminant fate model was implemented for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in Thau lagoon. The hydrodynamic model was tested against temperature and salinity measurements, while the contaminant fate model was assessed against available data collected at different stations inside the lagoon. The model results allow an assessment of the spatial and temporal variability of the distribution of contaminants in the lagoon, the seasonality of loads and the role of atmospheric deposition for the input of PCDD/Fs. The outcome suggests that air is an important source of PCDD/Fs for this ecosystem, therefore the monitoring of air pollution is very appropriate for assessing the inputs of these contaminants. These results call for the development of integrated environmental protection policies.

Modelling the influence of thermal stratification and complete mixing on the distribution and fluxes of polychlorinated biphenyls in the water column of Ispra Bay (Lake Maggiore).

A 1D coupled hydrodynamic and contaminant fate model was applied to simulate the distribution of polychlorinated biphenyls (PCBs) in the Ispra Bay located in the southern part of Lake Maggiore (Italy). The model succeeded in representing the hydrodynamic processes occurring in the lake such as thermal stratification during summer 2005 followed by the complete mixing of the water column in February 2006. The results of the PCB fate model highlighted that these processes play a key role for the settling of particles and consequently for the distribution of PCBs in the water column as well as for the contaminant flux at the sediment-water interface. On the air-water front, the simulations emphasised that the net atmospheric PCB input fluxes are generally more important during the cold season and show peaks during periods of high wet deposition. Finally, the seasonal variability of the distribution of PCB in the water column was assessed.

A bioaccumulation model for herbicides in Ulva rigida and Tapes philippinarum in Sacca di Goro lagoon (Northern Adriatic).

A bioaccumulation model to predict concentrations of s-triazine herbicides in the macroalgae Ulva rigida and in clams Tapes philippinarum has been implemented, calibrated and validated. The model uses input data from a 3D biogeochemical model that provides biomasses in the different compartments, i.e. phytoplankton, zooplankton and bacteria; and from a 3D fate model that provides the herbicides concentrations in the water column as well as in the sediments. Simulated data were compared with experimental data collected during a set of sampling campaigns carried out in 2004 and 2005 in the Sacca di Goro lagoon (Northern Adriatic). The model predicts correctly the concentrations of herbicides measured in Ulva rigida and reproduces with good agreement the values of concentration of herbicides found in clams. Furthermore, the simulated spatial and temporal dynamics in the biota compartment, following those of the water and sediments, are also in agreement with the experimental data. This integrated approach combining biogeochemical, fate and bioaccumulation models provide an overall assessment of the importance of the different environmental compartments and it can also support the testing of different management strategies to improve ecosystem state and functioning. Further research is necessary to elucidate the role and importance of the metabolism of these compounds by clams.

Integrated modelling of Polycyclic Aromatic Hydrocarbons in the marine environment: coupling of hydrodynamic, fate and transport, bioaccumulation and planktonic food-web models.

Spatio-temporal variability of pollutants in the environment is a complex phenomenon that requires a combined approach for its analysis. Whereas data on measured levels of contaminants in various environmental compartments is essential, it is not always possible to monitor at the necessary frequency and with the adequate spatial sampling distribution to capture this variability. Therefore a modelling approach able to complement experimental data and close the gaps in the monitoring programs is useful for assessing the contaminant dynamics occurring at different time scales. In this work a 1D water column fate model has been developed and tested for Polycyclic Aromatic Hydrocarbons (PAHs). The model has been coupled with a simple ecological model that includes a bioaccumulation module. Afterwards, the model has been used to study the temporal variability of contaminant concentrations as well as the fluxes between compartments. The results evidence the complex coupling between spatio-temporal scales and its influence on environmental concentration levels.