3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers.

In this work, we advance printed active composites by combining 3D printing, printed electronics, and liquid crystal elastomers (LCEs) to achieve soft actuators with free-standing two-way shape changing behaviors. Incorporated LCE strips are activated by Joule heating produced by printed conductive wires, while uniaxial deformation of the LCE strip is utilized as a driving force to achieve bending in the printed composite. The bending behavior of laminated hinges is first characterized in order to obtain a precise control of actuation, which is then exploited to actuate four demonstrative designs: a morphing airplane, a miura-ori structure, a cubic box, and a soft crawler. The soft morphing airplane and miura-ori structure are designed and fabricated with multiple laminated hinges to demonstrate the synergistic actions during actuation. The cubic box is constructed to show the capability of sequential folding by implementing multiple groups of conductive wires to achieve accurately addressable heating with temporal control. Finally, the two-way transformation is utilized as a driving force for the locomotion of a soft crawler stimulated by a periodic rectangular wave current. These examples show the great potential of using the hybrid 3D printing and pick-and-place method and using LCEs to achieve controllable shape change structures for a variety of potential practical applications.

3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing.

The three-dimensional (3D) printing of flexible and stretchable materials with smart functions such as shape memory (SM) and self-healing (SH) is highly desirable for the development of future 4D printing technology for myriad applications, such as soft actuators, deployable smart medical devices, and flexible electronics. Here, we report a novel ink that can be used for the 3D printing of highly stretchable, SM, and SH elastomer via UV-light-assisted direct-ink-write printing. An ink containing urethane diacrylate and a linear semicrystalline polymer is developed for the 3D printing of a semi-interpenetrating polymer network elastomer that can be stretched by up to 600%. The 3D-printed complex structures show interesting functional properties, such as high strain SM and SM -assisted SH capability. We demonstrate that such a 3D-printed SM elastomer has the potential application for biomedical devices, such as vascular repair devices. This research paves a new way for the further development of novel 4D printing, soft robotics, and biomedical devices.

Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures.

Pure cellulose nanocrystal (CNC) aerogels with controlled 3D structures and inner pore architecture are printed using the direct ink write (DIW) technique. While traditional cellulosic aerogel processing approaches lack the ability to easily fabricate complete aerogel structures, DIW 3D printing followed by freeze drying can overcome this shortcoming and can produce CNC aerogels with minimal structural shrinkage or damage. The resultant products have great potential in applications such as tissue scaffold templates, drug delivery, packaging, etc., due to their inherent sustainability, biocompatibility, and biodegradability. Various 3D structures are successfully printed without support material, and the print quality can be improved with increasing CNC concentration and printing resolution. Dual pore CNC aerogel scaffolds are also successfully printed, where the customizable 3D structure and inner pore architecture can potentially enable advance CNC scaffold designs suited for specific cell integration requirements.

Multimaterial 4D Printing with Tailorable Shape Memory Polymers.

We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PµSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (including rubbery modulus, glass transition temperature and failure strain which is more than 300% and larger than any existing printable materials) to enable controlled shape memory behavior. We used a high resolution, high contrast digital micro display to ensure high resolution of photo-curing methacrylate based SMPs that requires higher exposure energy than more common acrylate based polymers. An automated material exchange process enables the manufacture of 3D composite architectures from multiple photo-curable SMPs. In order to understand the behavior of the 3D composite microarchitectures, we carry out high fidelity computational simulations of their complex nonlinear, time-dependent behavior and study important design considerations including local deformation, shape fixity and free recovery rate. Simulations are in good agreement with experiments for a series of single and multimaterial components and can be used to facilitate the design of SMP 3D structures.