Corrosion inhibition performance of newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives for carbon steel in 1 M HCl solution: experimental, DFT and Monte Carlo simulation studies.

Three new organic compounds primarily based on 8-hydroxyquinoline have been successfully synthesized and characterized via different spectroscopic methods (FTIR, 1H, and 13C NMR). The synthesized compounds, namely 5-propoxymethyl-8-hydroxyquinoline (PMHQ), 5-methoxymethyl-8-hydroxyquinoline (MMHQ) and 5-hydroxymethyl-8-hydroxyquinoline (HMHQ), were evaluated as corrosion inhibitors for carbon steel in 1 M HCl solution using electrochemical impedance spectroscopy, potentiodynamic polarization and weight loss measurements at 298 K. Electrochemical measurements confirmed that the newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives are mixed type corrosion inhibitors and confirmed maximum protection efficiencies of 94, 89 and 81% for PMHQ, MMHQ, and HMHQ, respectively, at the optimum concentration of 10-3 M. The EIS spectra confirmed a slightly depressed semi-circle profile with a single time constant in Bode diagrams for the three organic compounds over the whole concentration and temperature ranges studied. The adsorption of PMHQ, MMHQ, and HMHQ on the carbon steel surface followed the Langmuir adsorption isotherm. In addition, the kinetic and thermodynamic parameters for carbon steel corrosion and inhibitor adsorption, respectively, were determined and discussed. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses supported the formation of a protective film on carbon steel in the presence of PMHQ, MMHQ, and HMHQ. Density functional theory calculations (DFT) showed that the effectiveness of the inhibitive actions of the studied compounds correlates well with their electron donating ability, whilst Monte Carlo simulations revealed that the extent and favourability of adsorption of inhibitor molecules on the carbon steel surface establish their corrosion inhibition performances.

ETM-ANN approach application for thiobenzamide and quinolizidine derivatives.

The structure anti-influenza activity relationships of thiobenzamide and quinolizidine derivatives, being influenza fusion inhibitors, have been investigated using the electronic-topological method (ETM) and artificial neural network (ANN) method. Molecular fragments specific for active compounds and breaks of activity were calculated for influenza fusion inhibitors by applying the ETM. QSAR descriptors such as molecular weight, E(HOMO), E(LUMO), ΔE, chemical potential, softness, electrophilicity index, dipole moment, and so forth were calculated, and it was found to give good statistical qualities (classified correctly 92%, or 48 compounds from 52 in training set, and 69% or 9 compounds from 13 in the external test set). By using multiple linear regression, several QSAR models were performed with the help of calculated descriptors and the compounds activity data. Among the obtained QSAR models, statistically the most significant one is the one of skeleton 1 with R(2) = 0.999.

8-Hydroxyquinoline based chitosan derived carbohydrate polymer as biodegradable and sustainable acid corrosion inhibitor for mild steel: Experimental and computational analyses.

The present study reports the synthesis, characterization and corrosion inhibition effects of chitosan (CH) and its 5-chloromethyl-8-hydroxyquinoline derivative (CH-HQ) for mild steel in acidic medium. The synthesized CH-HQ was characterized using 1H NMR and FT-IR spectroscopic methods. Corrosion inhibition efficiencies of CH and CH-HQ were measured using electrochemical and chemical techniques. The surface protection ability of the inhibitor molecules was also ascertained by surface analysis, while computational study was used to further justify the adsorption tendencies of the molecules on mild steel surface. CH-HQwasobserved to exhibit better protection efficiency than CH, as the highest inhibition efficiencies were recorded to be 78% and 93% for CH and CH-HQ, respectively. Potentiodynamic polarization studies revealed that CH and CH-HQ are mixed-type corrosion inhibitors over the studied temperature range (298 K ± 1 to 328 K ± 1). SEM-EDS studies were performed to demonstrate the adsorption of CH and CH-HQ on the mild steel surface. Adsorption behavior of the CH and CH-HQ was also supported by UV-visible (UV-vis) spectrophotometric analyses. Monte Carlo simulations (MC) and density functional theory (DFT) calculations were carried out to corroborate the experimental results.

Adsorption and anticorrosive behavior of aromatic epoxy monomers on carbon steel corrosion in acidic solution: computational studies and sustained experimental studies.

Herein, the synthesis, characterization and corrosion inhibition effectiveness of two aromatic epoxy monomers (AEMs) namely, 2-(oxiran-2-yl-methoxy)-N,N-bis(oxiran-2-yl-methyl)aniline (AEM1) and N,N-bis(oxiran-2-ylmethyl)-2-((oxiran-2-ylmethyl) thio)aniline (AEM2), in carbon steel corrosive dissolution in 1 M HCl solution is investigated using computational and experimental techniques. AEM1 and AEM2 were characterized using FT-IR, 1H NMR and 13C NMR spectroscopy techniques. Electrochemical results demonstrated that AEMs act as reasonably good corrosion inhibitors for carbon steel in 1 M HCl medium and their effectiveness followed the sequence: AEM2 (95.4%) > AEM1 (94.3%). A PDP study showed that AEMs act as mixed-type inhibitors with slight anodic predominance. Adsorption of the AEMs obeyed the Langmuir isotherm model. Interactions between AEMs and the metallic surface was further studied using DFT and MD simulations that give several computational parameters such as I, A, E HOMO, E LUMO, ΔE, δ, χ, ρ, σ, η, ΔN and E ads. The experimental and computational results were in good agreement and well complimented each other.

Rheological, electrochemical, surface, DFT and molecular dynamics simulation studies on the anticorrosive properties of new epoxy monomer compound for steel in 1 M HCl solution.

A new epoxy monomer, namely, tetraglycidyl-1,2-aminobenzamide (ER), was synthesized by condensation of the amines with epichlorohydrin in a basic medium. The obtained epoxy monomer was characterized by FT-IR and 1H NMR spectroscopy. Rheological properties of this monomer were determined using an advanced rheometer. Subsequently, the synthesized ER monomer was investigated as corrosion inhibitor for carbon steel in 1 M HCl solution. The adsorption properties of ER were analyzed by electrochemical, surface investigation and theoretical computational studies using DFT and molecular dynamics (MD). Results showed a high dependence of the viscosity of ER on temperature and concentration, and also, that ER has better inhibition performance. A good agreement between the results derived from computational (MD and DFT) and experimental methods was observed. The thermodynamic parameters, along with the kinetic parameters, showed that the adsorption of ER molecules onto carbon steel surface obeyed the Langmuir isotherm model, and the adsorption at metal-electrolyte interfaces involved both chemical and physical adsorption, but predominantly chemisorption mechanism.

Epoxy pre-polymers as new and effective materials for corrosion inhibition of carbon steel in acidic medium: Computational and experimental studies.

Present study is designed for the synthesis, characterization and corrosion inhibition behavior of two diamine aromatic epoxy pre-polymers (DAEPs) namely, N1,N1,N2,N2-tetrakis (oxiran-2-ylmethyl) benzene-1,2-diamine (DAEP1) and 4-methyl-N1,N1,N2,N2-tetrakis (oxiran-2-ylmethyl) benzene-1,2-diamine (DAEP2) for carbon steel corrosion in acidic medium. Synthesized DAEPs were characterized using spectral (Nuclear magnetic resonance (1H NMR) and Fourier transform infrared-attenuated total reflection (FTIR-ATR)) techniques. Viscosity studies carried out at four different temperatures (20-80 °C) increase in temperature causes significant reduction in their viscosities. The anticorrosive properties of DAEPs differing in the nature of substituents, for carbon steel corrosion in 1 M HCl solution was evaluated using several experimental and computational techniques. Both experimental and computational studies showed that inhibitor (DAEP2) that contains electron releasing methyl (-CH3) showed higher protectiveness as compared to the inhibitor (DAEP1) without substituent (-H). Electrochemical results demonstrate that DAEPs act as reasonably good inhibitors for carbon steel in 1 M HCl medium and their effectiveness followed the sequence: DAEP2 (92.9%) > DAEP1 (91.7%). The PDP results show that the diamine aromatic epoxy pre-polymers molecules (DAEPs) act as mixed type inhibitors. Electrochemical study was also supported using scanning electron microscopy (SEM) method were significant improvement in the surface morphology of inhibited (by DAEPs) metallic specimens was obtained. Results derived from computational density functional theory (DFT) and molecular dynamics (MD) simulationsand studies were consistent with the experimental results derived from SEM, EIS and PDP electrochemical studies. Adsorption of the DAEPs obeyed the Langmuir adsorption isotherm model.

Anticorrosive properties of Hexa (3-methoxy propan-1,2-diol) cyclotri-phosphazene compound for carbon steel in 3% NaCl medium: gravimetric, electrochemical, DFT and Monte Carlo simulation studies.

The corrosion inhibition performance of Hexa (3-methoxy propan-1,2 diol) cyclotriphosphazene (HMC) on carbon steel in 3% NaCl solution was investigated by weight loss (WL), potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) measurements, Density functional theory (DFT) and Monte Carlo (MC) simulation. The corrosion inhibition efficiency at optimum concentration (10-3M) is 99% of HMC at 298 K. The corrosion inhibition efficiency at 10-3 M decreases with increase in temperature. The adsorption of HMC on the surface of carbon steel obeyed Langmuir isotherm. Potentiodynamic polarization study confirmed that inhibitor anodic-type. DFT and Monte Carlo (MC) simulations based computational approaches were under taken to support the experimental findings. DFT studies revealed that HMC interact with metallic surface through donor-acceptor interactions in which the anionic parts act as electron donor (HOMO) and cationic parts behaved as electron acceptor (LUMO). The MC simulations study showed that studied HMC adsorb spontaneously on Fe (110) surface.