The Effect of a Heavy Resisted Sled-Pull Mesocycle on Sprint Performance in Junior Australian Football Players.

ABSTRACT: Edwards, T, Piggott, B, Banyard, HG, Haff, GG, and Joyce, C. The effect of a heavy resisted sled-pull mesocycle on sprint performance in junior Australian football players. J Strength Cond Res 37(2): 388-393, 2023-This study assessed the effect of heavy resisted sled-pull training on sprint times and force, velocity, and power characteristics in junior Australian football players. Twenty-six athletes completed a 6-week resisted sled-pull training intervention which included 10 training sessions and 1-week taper. Instantaneous velocity during 2 maximal 30 m sprints was recorded 1 week before and 1 week after the intervention with a radar gun. Velocity-time data were used to derive sprint performance and force, velocity, and power characteristics. A paired t -test assessed the within-group differences between preintervention and postintervention testing. Statistical significance was accepted at p ≤ 0.05. Hedges' g effect sizes (ESs) were used to determine the magnitude of change in dependent variables. Maximum velocity (ES = 1.33) and sprint times at all distances (ES range 0.80-1.41) significantly improved after heavy resisted sled-pull training. This was reflected in sprint force, velocity, and power characteristics with significant improvements in relative theoretical force (ES = 0.63), theoretical velocity (ES = 0.99), relative maximum power (ES = 1.04), and ratio of horizontal to vertical force (ES = 0.99). Despite the multifactorial nature of training and competing physical demands associated with preseason training, these findings imply that a short, resisted sled-pull training mesocycle may improve sprint performance and underlying force, velocity, and power characteristics in junior athletes.

Longitudinal Development of Sprint Performance and Force-Velocity-Power Characteristics: Influence of Biological Maturation.

ABSTRACT: Edwards, T, Weakley, J, Banyard, HG, Cripps, A, Piggott, B, Haff, GG, and Joyce, C. Longitudinal development of sprint performance and force-velocity-power characteristics: influence of biological maturation. J Strength Cond Res 37(11): 2178-2184, 2023-This study was designed to investigate the influence of biological maturation on the longitudinal development of sprint performance. Thirty-two subjects performed 2 assessments of maximal sprint performance that were separated by 18 months. Each sprint assessment was measured through a radar gun that collected instantaneous velocity with the velocity-time data used to derive sprint times and force-velocity-power characteristics. The biological maturity of each subject was assessed using a predictive equation, and subjects were grouped according to predicted years from peak height velocity (circa-PHV: -1.0 to 1.0; post-PHV: >1.0). A 2 × 2 mixed model analysis of variance was used to assess group × time interactions, and paired t -tests were used to assess the longitudinal changes for each maturity group. No significant group × time interactions were observed for any sprint time or force-velocity-power characteristic. The circa-PHV group experienced significant within-group changes in maximal theoretical velocity (6.35 vs. 5.47%; effect size [ES] = 1.26 vs. 0.52) and 5-m sprint time (-3.63% vs. -2.94%; ES = -0.64 vs. -0.52) compared with the post-PHV group. There was no significant change in the magnitude of relative theoretical maximum force in either group; however, both the circa-PHV and post-PHV groups significantly improved the orientation of force production at the start of the sprint (RFmax [4.91 vs. 4.46%; ES = 0.79 vs. 0.74, respectively]). Considering these findings, it is recommended that practitioners adopt training methods aimed to improve relative lower-limb force production, such as traditional strength training and sled pulling and pushing, to improve sprint performance and relative theoretical maximum force.

Comparison of Countermovement Jump and Squat Jump Performance Between 627 State and Non-State Representative Junior Australian Football Players.

ABSTRACT: Edwards, T, Weakley, J, Woods, CT, Breed, R, Benson, AC, Suchomel, TJ, and Banyard, HG. Comparison of countermovement jump and squat jump performance between 627 state and non-state representative junior Australian football players. J Strength Cond Res 37(3): 641-645, 2023-This cross-sectional study investigated differences in lower-body power of state and nonstate representative junior Australian football (AF) players through countermovement jump (CMJ) and squat jump (SJ) performance. A total of 627 players performed the CMJ and SJ at the end of the preseason phase over a 2-week period, with each player grouped according to their age (under 18 [U18] or under 16 [U16]), and highest competition level played (state representation and nonstate representation). One-way multivariate analysis of variance (MANOVA), follow up ANOVA's, and Cohen's d effect sizes were used to identify significant main effects and between-group differences. Statistical significance was set at α < 0.05. Significant small-to-moderate effect size differences were observed between competition level, with state U18 and U16 players recording greater CMJ and SJ height, and peak power (PP), compared with their nonstate representative peers, respectively. Similarly, significant small-to-moderate effect size differences existed between age groups, with nonstate U18 players recording greater CMJ and SJ height and PP than nonstate U16 counterparts. However, state U18 and state U16 only differed in CMJ PP. No differences were found between competition level or age groups for the difference between CMJ and SJ jump height (CMJSJ diff ). Together, these findings suggest that state and nonstate representative junior AFs may have a similar ability to use the stretch-shortening cycle, despite state representative players jumping higher in the CMJ and SJ.

Effect of Traditional, Rest Redistribution, and Velocity-Based Prescription on Repeated Sprint Training Performance and Responses in Semiprofessional Athletes.

ABSTRACT: Weakley, J, Castilla, AP, Ramos, AG, Banyard, H, Thurlow, F, Edwards, T, Morrison, M, McMahon, E, and Owen, C. The effect of traditional, rest redistribution, and velocity-based prescription on repeated sprint training performance and responses in semi-professional athletes. J Strength Cond Res 37(8): 1566-1572, 2023-The aim of this study was to investigate the effects of traditional, rest redistribution, and velocity-based repeated sprint training methods on repeated sprint performance, perceived effort, heart rate, and changes in force-velocity-power (FVP) profiles in male semiprofessional athletes. In a randomized crossover design, a traditional (2 sets of 6 repetitions [TRAD]), 2 different rest redistribution (4 sets of 3 repetitions [RR4] and 12 sets of 1 repetition [RR12]), and a 5% velocity loss (VL5%) (12 repetitions, with sets terminated when a 5% reduction in mean velocity had occurred) condition were completed. Mean and peak velocity, mean heart rate, and differential ratings of perceived exertion (dRPE) were measured throughout each session, while horizontal FVP profiles were assessed presession and postsession. The RR4 and RR12 conditions allowed the greatest maintenance of velocity, while the RR4, RR12, and VL5% had a moderate , significantly greater mean heart rate than the traditional condition. Trivial , nonsignificant differences between all conditions were observed in dRPE of the legs and breathlessness and FVP profiles. These findings indicate that rest redistribution can allow for greater maintenance of sprint velocity and heart rate, without altering perceived effort during repeated sprint training. In addition, velocity-loss thresholds may be a feasible method of prescription if athletes have diverse physical qualities and reductions in sprint performance during repeated sprint training are undesirable. Practitioners should consider these outcomes when designing repeated sprint training sessions because the strategic use of these methods can alter sprint performance and internal load without changing perceptions of intensity.

Reliability and Minimal Detectable Change of Sprint Times and Force-Velocity-Power Characteristics.

ABSTRACT: Edwards, T, Banyard, HG, Piggott, B, Haff, GG, and Joyce, C. The reliability and minimal detectable change of sprint times and force-velocity-power characteristics. J Strength Cond Res 36(1): 268-272, 2022-Research has not yet provided critical information for practitioners to determine the minimal detectable change (MDC) in sprint times or force-velocity-power characteristics. Therefore, the aim of this study was to establish the interday reliability and MDC of sprint times and sprint force-velocity-power characteristics in junior Australian football (AF) players. Seventeen players were assessed using a radar device that recorded instantaneous velocity during 3 maximal 30-m sprint accelerations performed on 2 nonconsecutive days. Sprint force, velocity, and power characteristics were derived through inverse dynamics applied to the raw velocity-time data. Relative and absolute reliability was determined by calculating the intraclass correlation coefficient (ICC), coefficient of variation (CV), and MDC. Data analysis was assessed for (a) the first trial, (b) the best trial (the fastest 30-m split time), (c) the average of the first 2 trials, and (d) the average of all 3 trials from each testing session. The main findings were (a) absolute theoretical maximum force (F0), theoretical maximal velocity (V0), absolute and relative maximum power (Pmax), maximum ratio of force (RFmax), maximum velocity (Vmax), and all sprint distance times (5-30 m) displayed acceptable reliability (CV < 10% and ICC >0.75) and 2) the average of 2 and 3 trials was the best method of establishing reliable sprint times and force-velocity-power characteristics between sessions. This study provides important information for practitioners to determine the MDC in sprint times and force-velocity-power characteristics that allow coaches to identify true changes in performance.

Influence of age and maturation status on sprint acceleration characteristics in junior Australian football.

This study aimed to investigate the influence of chronological age and maturation status on sprint acceleration characteristics in junior Australian football (AF) players. Biological maturity of 109 subjects was assessed and subjects were grouped according to predicted years from peak height velocity (PHV) (pre-, mid-, and post-PHV) and chronological age (13 years, 14 years, and 15 years). A one-way multivariate analysis of variance and magnitude-based decisions were used to determine between-group differences. Instantaneous velocity was measured during two maximal 30m sprints via radar gun with the velocity-time data used to derive the force, velocity, and power characteristics. Chronologically, the greatest differences were observed between the 13 and 14 year old groups with the latter group producing likely greater relative maximum power (Pmax) (ES[effect size]=0.44) and theoretical maximal velocity (V0) (ES=0.49). The post-PHV group likely demonstrated a greater ability to apply force at faster velocity (V0; ES=0.59) and orient the force in a horizontal direction (Drf%; ES=-0.49) than the mid-PHV group. No differences in relative theoretical maximal force (F0) were observed between groups. Considering the findings, practitioners should aim to improve relative lower limb strength through heavy sled push or sled pulls and traditional strength training exercises to improve relative F0.

Reliability and Sensitivity of Neuromuscular and Perceptual Fatigue Measures in Collegiate Men's Basketball.

The purpose of this study was to establish the reliability and sensitivity of a countermovement jump (CMJ) and perceptual wellness questionnaire in NCAA Division I men's basketball players. Twelve male collegiate basketball athletes completed 3 maximal CMJ's on a portable force plate and a customized perceptual wellness questionnaire prior to training on non-consecutive days. CMJ variables were derived from computer software and used in analysis. All CMJ variables expressed acceptable trial-to-trial reliability (CV < 8%) except eccentric duration (CV = 8.3%). Peak absolute and relative power, and absolute mean power and force were capable of detecting small performance changes with CV% < SWC%. Similar trends were observed for interday reliability with the exception of flight time to contraction time (FT:CT) (CV = 10.9%), jump height (CV =12.1%), concentric duration (CV = 9.1%) and total duration (CV = 13.6%). Perceptual wellness showed acceptable interday reliability (CV = 6.9%), however was unable to detect the SWC. When assessing the CMJ, selected variables can be used to monitor acute and chronic changes in performance. CMJ variables relating to the eccentric phase may respond differently to typical CMJ variables and may provide insight into the loading mechanisms of response. Perceptual wellness questionnaires also prove to be a reliable subjective fatigue monitoring tool.

Correction to "ß-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends".

[This corrects the article DOI: 10.1021/acsapm.4c00468.].

ß-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-Polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends.

Poly(vinylidene fluoride) (PVDF) is a semicrystalline polymer that exhibits unique piezoelectric characteristics along with good chemical resistance and high thermal stability. Layer-based material extrusion (MEX) 3D printing of PVDF is desired to create complex structures with piezoelectric properties; however, the melt processing of PVDF typically directs the formation of the α crystalline allomorph, which does not contribute to the piezoelectric response. In this work, PVDF was compounded with poly(methyl methacrylate) (PMMA) and cyclopentyl-polyhedral oligomeric silsesquioxane (Cp-POSS) nanostructured additives in binary and ternary blends to improve MEX printability while maintaining piezoelectric performance. Overall crystallinity and ß phase content were evaluated and quantified using a combination of attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and differential scanning calorimetry (DSC). Enhancement of MEX printability was measured by quantifying the interlayer adhesion and warpage of printed parts. All blends studied contained a significant percentage of ß allomorph, but it could be detected by ATR-FTIR only after the removal of a thin surface layer. Inclusion of 1% Cp-POSS and up to 10% PMMA in blends with PVDF improved interlayer adhesion (2.3-3.6x) and lowered warpage of MEX printed parts compared to neat PVDF. The blend of 1% Cp-POSS/1% PMMA/PVDF was demonstrated to significantly improve the quality of MEX printed parts while showing similar piezoelectric performance to that of neat PVDF (average piezoelectric coefficient 24 pC/N). MEX printing of PVDF blends directly into usable parts with significant piezoelectric performance while reducing the challenges of printing the semicrystalline polymer opens the potential for application in a number of high value sectors.

Sprint acceleration characteristics across the Australian football participation pathway.

The aim of this study was to compare the force, velocity and power profiles of a maximal sprint acceleration through different competition levels of the Australian Football (AF) participation pathway. One hundred and sixty-two junior AF athletes across five competition levels including State under 18's (ST 18), State under 16's (ST 16), local under 18's (LOC 18), local under 15's (LOC 15), and local under 14's (LOC 14) participated in this cross-sectional study. Velocity-time data from maximal sprint accelerations were analysed to derive athlete's sprint acceleration characteristics and split times. ST 18 showed a more force-orientated profile than the LOC 18 with moderate differences in relative theoretical maximal force (F0) (7.54%), absolute F0 (10.51%), and slope of the force-velocity relationship (Sf-v) (9.27%). Similarly, small differences were found between ST 18 and ST 16 in relative F0 (4.79%) and Sf-v (6.28%). Moderate to extremely large differences were observed between players competing in older (ST 18, LOC 18, ST 16) compared to younger (LOC 15, LOC 14) competition levels highlighting the potential influence of biological maturation. It is recommended that practitioners working with junior AF players to consider developing a force-orientated sprint acceleration profile to improve sprinting performance.

Sprint acceleration force-velocity-power characteristics in drafted vs non-drafted junior Australian football players: preliminary results.

This investigation aimed to compare the maximal sprint acceleration profiles of drafted and non-drafted elite junior Australian football (AF) players. Nineteen players (10 drafted and 9 non-drafted) from an elite junior AF state team participated in this study. Instantaneous velocity was measured via radar gun during maximal 30 m sprints. The velocity-time data were analysed to derive individual force-velocity-power characteristics and sprint times. No significant differences existed between groups, however drafted players reached moderately faster maximum velocity (Hedges' g = 0.70 [-0.08; 1.48] and theoretical maximum velocity (g = 0.65 [-0.13; 1.42]) than non-drafted players indicating a superior ability to apply higher amounts of force at increasing sprinting velocity. Further, drafted players produced moderately higher absolute theoretical maximum force (g = 0.72 [-0.06; 1.50]) and absolute maximum power (g = 0.83 [0.04; 1.62]) which reflects their moderately higher body mass (g = 0.61[-0.16;1.38]). Although not significant, in this sample of elite junior AF players, those drafted into the AFL displayed greater absolute sprint acceleration characteristics and maximal velocity capabilities than their non-drafted counterparts (moderate effect size). Whether force-velocity-power characteristics can be more beneficial in differentiating sprint performance of elite junior Australian footballers compared to the traditional sprint time approach warrants further investigation with a larger sample size.

Monitoring and Managing Fatigue in Basketball.

The sport of basketball exposes athletes to frequent high intensity movements including sprinting, jumping, accelerations, decelerations and changes of direction during training and competition which can lead to acute and accumulated chronic fatigue. Fatigue may affect the ability of the athlete to perform over the course of a lengthy season. The ability of practitioners to quantify the workload and subsequent fatigue in basketball athletes in order to monitor and manage fatigue levels may be beneficial in maintaining high levels of performance and preventing unfavorable physical and physiological training adaptations. There is currently limited research quantifying training or competition workload outside of time motion analysis in basketball. In addition, systematic research investigating methods to monitor and manage athlete fatigue in basketball throughout a season is scarce. To effectively optimize and maintain peak training and playing performance throughout a basketball season, potential workload and fatigue monitoring strategies need to be discussed.

A Narrative Review of the Physical Demands and Injury Incidence in American Football: Application of Current Knowledge and Practices in Workload Management.

The sport of American football (AmF) exposes athletes to high-velocity movements and frequent collisions during competition and training, placing them at risk of contact and non-contact injury. Due to the combative nature of the game, the majority of injuries are caused by player contact; however, a significant number are also non-contact soft-tissue injuries. The literature suggests that this mechanism of injury can be prevented through workload monitoring and management. The recent introduction of microtechnology into AmF allows practitioners and coaches to quantify the external workload of training and competition to further understand the demands of the sport. Significant workload differences exist between positions during training and competition; coupling this with large differences in anthropometric and physical characteristics between and within positions suggests that the training response and physiological adaptations will be highly individual. Effective athlete monitoring and management allows practitioners and coaches to identify how athletes are coping with the prescribed training load and, subsequently, if they are prepared for competition. Several evidence-based principles exist that can be adapted and applied to AmF and could decrease the risk of injury and optimise athletic performance.

The safe removal of central venous catheters.

Many nurses working in general wards and departments are caring for patients with central venous catheters and are increasingly responsible for their removal. This article outlines the basis of good practice and the possible complications, focusing on air embolism.