RESUMO
Microplastics (MPs) are biologically active environmental pollutants having significant impact on the ecosystem and human health. MPs have been reported to increase oxidative stress, resulting in tissue damage, developmental abnormalities, metabolic disorders, epigenetic changes, abnormal reproduction, and reduced gamete quality. At present, most of the existing literature has focused on the effects of MPs on the reproduction of various aquatic organisms; however, the effects of MPs on mammalian reproduction specifically humans are least studied except a few ones fragmentally discussing the effects of MPs on gametogenesis in human. This review discusses effects of MPs on male and female reproduction with a focus on different metabolic pathways involved in compromised gamete quality, gamete toxicity, apoptosis, and DNA damage.
Assuntos
Microplásticos , Poluentes Químicos da Água , Feminino , Humanos , Masculino , Ecossistema , Microplásticos/toxicidade , Plásticos/toxicidade , Saúde Reprodutiva , Transdução de Sinais , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análiseRESUMO
This study evaluated the efficacy of a washing process with cyclodextrin in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and PCBs from a field contaminated soil. Ultrasonically aided mixing of the field contaminated soil with a combination of cyclodextrin solution (10%, w/v) and a sparing quantity (2 mmol) of EDTA, simultaneously mobilized appreciable quantities of PCBs and much of the analyte metal (Cd, Cr, Cu, Mn, Ni, Pb, Zn) burdens. Relative to the action of individual reagents, a combination of randomly methylated (RAMEB) or hydroxypropyl beta-cyclodextrin (HPCD) with EDTA did not alter the PCB extraction efficiency nor did the presence of cyclodextrin change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe, Mn, Ni, and Zn) but did increase the recovery of Cu and Pb modestly. Three sonication-washes with the same charge of reagents mobilized appreciable quantities of PCBs (40-76%) and quantitatively extracted the labile fraction of Cd, Cu, Mn, and Pb. RAMEB proved to be more efficient than HPCD for PCB extractions. Three successive extractions with a single charge of cyclodextrin mobilized almost as much PCB (RAMEB, 76%; HPCD, 40%) as did the companion extractions that used fresh reagents each time (RAMEB, 78%; HPCD, 42%). Collectively, these studies demonstrated that PCB compounds and selected heavy metals can be co-extracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and cyclodextrin.
Assuntos
Ciclodextrinas/química , Ácido Edético/química , Recuperação e Remediação Ambiental/métodos , Metais Pesados/isolamento & purificação , Bifenilos Policlorados/isolamento & purificação , Poluentes do Solo/isolamento & purificação , Canadá , Recuperação e Remediação Ambiental/economia , Metais Pesados/química , Bifenilos Policlorados/química , Poluentes do Solo/química , UltrassomRESUMO
We conducted a laboratory study to assess the efficiency of nonionic and anionic surfactants in combination with a sparing quantity of ethylenediaminetetraacetate (EDTA) to simultaneously extract heavy metals (HMs) and polychlorinated biphenyl (PCB) compounds from a field-contaminated soil. A soil wash that mobilized both HMs and PCBs was combined with back-extraction with hexane to remove PCBs from the aqueous wash. The aqueous washing suspension was then regenerated by precipitation of the HMs induced by corrosion and hydrolysis of zero-valent Mg to provide a cleaned soil and innocuous extract. Finally, the washing suspension was recycled twice to mobilize more contaminants from the soil particulate fraction. After ultrasonic equilibration, EDTA in admixture with a nonionic surfactant did not appreciably change the efficiency of mobilization of most heavy metals (Al, Cd, Cr, Fe Mn, Ni, and Zn), but did increase the recovery of Cu and Pb. The release of EDTA from HM complexes was efficient for most metals (99%) but was influenced by the chemical characteristics of the surfactant. The EDTA recovery (62-65%) after three cycles of soil washing, hexane back-extraction, and Mg(0) treatment was similar for all reagent combinations. In toto, these studies demonstrate that after treatment with ultrasound, selected heavy metals can be coextracted efficiently from soil with a single washing suspension containing EDTA and a nonionic surfactant.
Assuntos
Metais Pesados/química , Bifenilos Policlorados/química , Poluentes do Solo/química , Gerenciamento de Resíduos/métodos , Purificação da Água/métodos , Adsorção , Quelantes/química , Precipitação Química , Ácido Edético/química , Poluição Ambiental/prevenção & controle , Hexanos/química , Concentração de Íons de Hidrogênio , Metais Pesados/isolamento & purificação , Bifenilos Policlorados/isolamento & purificação , Poluentes do Solo/isolamento & purificação , Tensoativos/química , Gerenciamento de Resíduos/economia , Purificação da Água/economiaRESUMO
We conducted a laboratory study to assess the feasibility of a washing process with nonionic and anionic surfactants in combination with ethylenediaminetetraacetate (EDTA) for the simultaneous mobilization of heavy metals and polychlorinated biphenyls (PCBs) from a field-contaminated soil. Unit processes consisting of complexometric extraction and surfactant-assisted mobilization were combined with reagent regeneration and detoxification steps to generate innocuous products. Ten minutes of ultrasonic mixing of the soil with a combination of 30 mL L(-1) surfactant suspension and a sparing quantity (2 mmol) of EDTA mobilized appreciable quantities of PCBs, virtually all of the available Cd, Cu, Mn, and Pb, and lesser amounts of the Zn, Ni, and Cr but only small quantities of Al and Fe. Relative to individual reagents, combinations of surfactant (Brij 98, Triton X-301, or Triton XQS-20) with EDTA did not influence PCB extraction efficiencies perceptibly. Of the three surfactants, the Brij 98 proved to be the most efficient for three successive extractions with a single charge, mobilizing 83% of the PCBs, whereas companion extractions that used fresh reagent each time mobilized 87% of the soil PCB content. The decreased PCB mobilization with the same quantity of anionic surfactant (71 or 68%) resulted from losses during the EDTA regeneration process with zero-valent Mg. In toto, these studies demonstrate that PCB compounds and selected heavy metals can be coextracted efficiently from soil with three successive washes with the same washing suspension containing EDTA and a nonionic surfactant.
Assuntos
Ácido Edético/química , Metais Pesados/isolamento & purificação , Bifenilos Policlorados/isolamento & purificação , Poluentes do Solo/isolamento & purificação , Tensoativos/química , Purificação da Água/métodos , Quelantes/química , Metais Pesados/química , Bifenilos Policlorados/química , Poluentes do Solo/química , Fatores de Tempo , Purificação da Água/economiaRESUMO
A laboratory study was conducted to assess the feasibility of a washing process with nonionic surfactant in combination with EDDS for the simultaneous mobilization of MTEs and PAH compounds from a field-contaminated soil. Unit processes consisting of complexometric extraction and surfactant-assisted mobilization were combined with reagent regeneration and detoxification steps to generate innocuous products. Thirty minutes of ultrasonic mixing of the soil with a combination of 20 mL L(-1) surfactant suspension and a sparing quantity (2 mmol) of EDDS mobilized virtually all of the benzo[α] pyrene (B(a)P) and chrysene (Cry) and an appreciable portion of the burdens of Cd, Cr, Mn, Ni, Pb and Zn, lesser amounts of the As and Cu, but only small quantities of Al and Fe. Relative to individual reagents, combinations of surfactant (Brij98), with EDDS increased the recovery of B(a)P but seemingly did not influence Cry extraction efficiencies perceptibly. Nine sequential washes with the same initial dosage of mobilization aids decreased the quantities of both PAHs to levels in the soil that conformed to recommended maxima. What resulted was a soil that had been cleaned and a limited quantity of innocuous wash water.
Assuntos
Etilenodiaminas/química , Compostos Policíclicos/isolamento & purificação , Poluentes do Solo/isolamento & purificação , Succinatos/química , Tensoativos/química , Oligoelementos/isolamento & purificação , Misturas Complexas , Íons , UltrassomRESUMO
An automated FTIR method for the determination of the base content (BC(pKa)) of oils at rates of > 120 samples/h has been developed. The method uses a 5% solution of trifluoroacetic acid in 1-propanol (TFA/P) added to heptane-diluted oil to react with the base present and measures the ν(COO(-)) absorption of the TFA anion produced, with calibrations devised by gravimetrically adding 1-methylimidazole to a heptane-TFA/P mixture. To minimize spectral interferences, all spectra are transformed to 2(nd) derivative spectra using a gap-segment algorithm. Any solvent displacement effects resulting from sample miscibility are spectrally accounted for by measurement of the changes in the 1-propanol overtone band at 1936 cm(-1). A variety of oils were analyzed for BC(0.5), expressed as mEq base/g oil as well as converted to base number (BN) units (mg KOH/g oil) to facilitate direct comparison with ASTM D2896 and ASTM D974 results for the same samples. Linear relationships were obtained between FTIR and D2896 and D974, with the ASTM methods producing higher BN values by factors of ~1.5 and ~1.3, respectively. Thus, the FTIR BC method correlates well with ASTM potentiometric procedures and, with its much higher throughput, promises to be a useful alternative means of rapidly determining reserve alkalinity in commercial oil condition monitoring laboratories.
Assuntos
Automação Laboratorial , Lubrificantes/química , Óleos/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Heptanos/química , Ensaios de Triagem em Larga Escala , Humanos , Potenciometria/métodos , Projetos de Pesquisa , Ácido Trifluoracético/químicaRESUMO
A method to determine the total PCB content by hydrogenolysis (hydrodechlorination and hydrogenation) of chlorinated biphenyl compounds was extended to natural particulate matrices (soil and sediment). The contaminated soil was suspended in hexane in the presence of Pd/gamma-Al2O3 in a hydrogen atmosphere then permitted to react for one hour at 65 degrees C. Dicyclohexyl, recovered in the hexane, was quantified by gas chromatography mass spectrometry. The reaction was very efficient for soil/sediment in hexane suspension and virtually complete provided that excess catalyst was added to samples that were burdened with higher PCB loadings prior to reaction otherwise some partial hydrogenation of biphenyl was also observed. The proposed method was validated with the analysis of five certified reference materials.