Controlled electroluminescence from films composed of mixed bio-composites and nanotubes.

Good things come in threes: A new type of light emitting bio-composites allowing for the nanometric separation of the active components is demonstrated. A protein with large host-guest capacities is used for the encapsulation of a water-soluble composite dye in a nano-sized shell, which efficiently reduces Förster resonance energy transfer and related mechanisms. Blending of this bio-composite with multi-walled nanotubes increases the charge injection efficiency, in the electro-luminescent device.

DNA-nanoparticle assemblies go organic: macroscopic polymeric materials with nanosized features.

BACKGROUND: One of the goals in the field of structural DNA nanotechnology is the use of DNA to build up 2- and 3-D nanostructures. The research in this field is motivated by the remarkable structural features of DNA as well as by its unique and reversible recognition properties. Nucleic acids can be used alone as the skeleton of a broad range of periodic nanopatterns and nanoobjects and in addition, DNA can serve as a linker or template to form DNA-hybrid structures with other materials. This approach can be used for the development of new detection strategies as well as nanoelectronic structures and devices. METHOD: Here we present a new method for the generation of unprecedented all-organic conjugated-polymer nanoparticle networks guided by DNA, based on a hierarchical self-assembly process. First, microphase separation of amphiphilic block copolymers induced the formation of spherical nanoobjects. As a second ordering concept, DNA base pairing has been employed for the controlled spatial definition of the conjugated-polymer particles within the bulk material. These networks offer the flexibility and the diversity of soft polymeric materials. Thus, simple chemical methodologies could be applied in order to tune the network's electrical, optical and mechanical properties. RESULTS AND CONCLUSIONS: One- two- and three-dimensional networks have been successfully formed. Common to all morphologies is the integrity of the micelles consisting of DNA block copolymer (DBC), which creates an all-organic engineered network.

A new method for analysis of non-pregnant uterine peristalsis using transvaginal ultrasound.

OBJECTIVES: To develop an objective method for analysis of uterine peristalsis using transvaginal sonography (TVS). METHODS: We performed computerized analysis of 2-5-min video recordings of TVS imaging of a midsagittal cross-section of the uterus during the proliferative and early secretory phases of 18 healthy volunteers aged 28-41 years. The contours of the fluid-endometrial interface (FEI) and the endometrium-myometrium interface (EMI) were detected in each frame, and the data from all frames were used to explore the dynamic motility characteristics of these interfaces at fixed distances from the fundus. RESULTS: The mean ± SD dominant frequency of peristalsis of the EMI along the midsagittal cross-section was 0.049 ± 0.01 Hz and that of the cavity center was 0.043 ± 0.02 Hz. The maximal amplitudes of the EMI were about 1 ± 0.25 mm, located between 7 and 17 mm from the fundus. The amplitudes of the FEI were in the range 0.05-0.2 mm. The amplitude of the cavity centerline movement was 0.94 ± 0.34 mm, located at the extremes of the unperturbed curve. CONCLUSIONS: This study provides a simple tool for analysis of uterine peristalsis characteristics using ultrasound data. This is possible at the EMI even when the FEI is invisible or incomplete, such as during the luteal phase, when an intrauterine contraceptive device is in place, and during diagnostic or medical intervention.

Disseminated pseudallescheriosis in a dog.

A case of disseminated pseudallescheriasis in a German Shepherd bitch is presented. Bones (ilium, a rib and phalanges), joints (elbow and acetabulum) and the surrounding tissues were the principal organs affected. In addition, Pseudallescheria boydii was isolated, in lower numbers, from the eye, kidney, lymph nodes draining the affected regions and urine. The dog was euthanized. P. boydii was identified by morphologic characteristics and molecular techniques (beta tubulin sequence). In addition, an ITS nucleotide sequence analysis showed that this strain differed from another isolate identified as Scedosporium apiospermum that had caused a disseminated infection in another German Shepherd. The importance of the molecular characterization of fungi belonging to the Pseudallescheria/Scedosporium complex, isolated from animals is stressed in light of the ongoing attempts to recharacterize these fungi.

High-yield fabrication of molecular vertical junctions.

High-yield fabrication and characterization of a ferrocene-based molecular device is reported. This device, fabricated with the use of modified nanocavity architecture shows very high yield, thus providing a template for exploring the transport properties of molecular junctions. The ferrocene-based devices show multiple negative differential peaks with high reproducibility and temperature stability. We use the multiple arrays to investigate the top-contact effect on the NDR signal at different locations in the wafer.

Large-scale fabrication of 4-nm-channel vertical protein-based ambipolar transistors.

We suggest a universal method for the mass production of nanometer-sized molecular transistors. This vertical-type device was fabricated using conventional photolithography and self-assembly methods and was processed in parallel fashion. We used this transistor to investigate the transport properties of a single layer of bovine serum albumin protein. This 4-nm-channel device exhibits low operating voltages, ambipolar behavior, and high gate sensitivity. The operation mechanism of this new device is suggested, and the charge transfer through the protein layer was explored.

Identification of Mycoplasma bovigenitalium and Mycoplasma canadense from outbreaks of granulopapular vulvovaginitis in dairy cattle in Israel.

A syndrome in which white foci and granulopustular lesions appeared on the vaginal mucous membranes of Holstein cows in several dairy herds in Israel is described. During clinical and diagnostic investigations, Mycoplasma bovigenitalium was isolated from 11 of 20 clinical cases. Vaginal swabs taken from the same cows yielded three isolates of Mycoplasma canadense, which were all associated with the M bovigenitalium infection. Two isolates of small, round, non-enveloped viral particles were approximately 25 nm in diameter and characteristic of enteroviruses on negative-staining electron microscopy.

Effects of bovine necrotic vulvovaginitis on productivity in a dairy herd in Israel.

Bovine necrotic vulvovaginitis (BNVV) is characterized by the development of a necrotic vulvovaginal lesion, almost exclusively in post-parturient first-lactation cows, associated with Porphyromonas levii. The scope of this survey was to evaluate the impact of BNVV on herd productivity as a means to rationally evaluate the resources that should be allocated in dealing with the syndrome. During an outbreak of BNVV in a dairy herd, following the introduction of a large number of cows from another farm, the impact of the animals' origin (local or transferred) and BNVV (positive or negative) upon involuntary culling rate, milk yield and days between pregnancies were assessed. The results indicated that the number of days between pregnancies was significantly higher in first-lactation cows with BNVV but was not influenced by the other independent variables. None of the other variables included in this survey had any effect on the involuntary culling rate and milk yield.

Sample-based assessment of the microbial etiology of bovine necrotic vulvovaginitis.

A semiquantitative evaluation of potential bacterial pathogens was correlated to the severity of lesions during an outbreak of bovine necrotic vulvovaginitis (BNVV) on an Israeli dairy herd. Bacteriologic examination of 287 vaginal swabs from 104 post-calving heifers showed a highly significant correlation between Porphyromonas levii colony forming unit numbers and the clinical scores of the lesions, when assessed by an ordinal regression statistical model. No such correlation was found for the other bacteria included in the study. Nineteen samples taken for virological examinations resulted negative for bovine herpes viruses 1, 2, 4 and 5. Thus the results of this study substantiate the essential role of P. levii in the etiology of BNVV and indicate that BHV4 is not required as a predisposing factor to the syndrome.

A herd level analysis of urinary tract infection in dairy cattle.

Cystitis, urethritis and pyelonephritis in cattle most commonly result from ascending urinary tract infection with Corynebacterium renale, Corynebacterium cystidis, Corynebacterium pilosum or Escherichia coli. We describe the clinical, bacteriological, clinical-pathological and epidemiological findings in a dairy cattle herd with urinary tract infection (UTI). Blood and urine samples from 17 calves and 19 cows were submitted to laboratory examinations. Depression, muscle wasting, weakness and frequent urine dribbling were the main characteristics of UTI in calves. Affected cows showed weight loss and an abrupt reduction in feed intake and milk production. Enlargement of the left kidney and loss of normal lobulation were evident on rectal examination. E. coli was the most frequent cause of UTI but C. renale, alpha-haemolytic Streptococcus spp., Proteus spp. Pseudomonas aeruginosa, Klebsiella spp. and Oligella urethralis were isolated as well. Differences in total protein and several protein fractions were found between affected and healthy animals.

Mathematical simulation of forced expiration.

Flow limitation during forced expiration is simulated by a mathematical model. This model draws on the pressure-area law obtained in the accompanying paper, and the methods of analysis for one-dimensional flow in collapsible tubes developed by Shapiro (Trans. ASME J. Biomech. Eng. 99: 126-147, 1977). These methods represent an improvement over previous models in that 1) the effects of changing lung volume and of parenchymal-bronchial interdependence are simulated; 2) a more realistic representation of collapsed airways is employed; 3) a solution is obtained mouthward of the flow-limiting site by allowing for a smooth transition from sub- to supercritical flow speeds, then matching mouth pressure by imposing an elastic jump (an abrupt transition from super- to subcritical flow speeds) at the appropriate location; and 4) the effects of levels of effort (or vacuum pressure) in excess of those required to produce incipient flow limitation are examined, including the effects of potential physiological limitation.

Tube law for the intrapulmonary airway.

A semiempirical model of a pressure-area relationship for the bronchial airways is developed. It is described by a single similarity law consistent in form with the nonlinear elastic behavior of biological tissue. The tethering effect of the parenchyma is lumped into the wall properties of the bronchi and is included in an effective wall stiffness. The model, which is fitted to the experimental data of Takishima and his associates (J. Appl. Physiol. 38: 875-881, 1975), is lung-volume dependent and is therefore suitable for the analyses of airflow at different lung volumes, especially for modeling of forced expiration.

Gas dispersion in volume-cycled tube flow. I. Theory.

A mathematical theory is derived for the dispersion of a contaminant bolus introduced into a fully developed volume-cycled oscillatory pipe flow. The convection-diffusion equation is solved for a tracer gas bolus by expressing the local concentration field as a series expansion of derivatives of the area-averaged concentration. The local, as well as the area-averaged, concentration is determined for a uniform initial slug or Gaussian bolus. The effect of various flow parameters such as Womersley parameter, Schmidt number, and tidal volume is investigated. The overall dispersion is characterized by a time-averaged effective diffusion coefficient, which for long duration coincides with previous dispersion theories based on a constant linear axial concentration profile. The effective diffusion coefficient can be determined from the local time history of concentration, independent of the spatial location or the initial tracer bolus. Furthermore the local peaks of the concentration-time curve follow a decaying curve dictated by the time-averaged effective diffusion coefficient. Thus the theory is directly applicable for dispersion measurements in oscillatory tube flows, a basis for the pulmonary airways application, as shown by Gaver et al. (J. Appl. Physiol. 72: 321-331, 1992).

Gas dispersion in volume-cycled tube flow. II. Tracer bolus experiments.

We present a new method for rapid measurement of local gas dispersion in volume-cycled tube flow. After a small bolus of tracer gas (argon) was injected into the oscillating flow, the time-averaged effective diffusion coefficient (mean value of Deff/D) for axial transport of a tracer gas is evaluated from local argon concentration measurements taken by a mass spectrometer. Two methods are presented for the evaluation of mean value of Deff/D from the concentration measurements: one uses all the sampled data, and the other uses only the local peaks of the concentration. Experiments were conducted in two tubes (radius = 0.85 or 1.0 cm) over a range of frequencies (0.42 less than or equal to f less than or equal to 8.5 Hz) and tidal volumes (7 less than or equal to VT less than or equal to 48 ml). The experimental results show very good agreement with the theoretical predictions of Elad et al. (J. Appl. Physiol. 72: 312-320, 1992). In the absence of oscillations (static fluid), the resulting mean value of Deff/D converges to that of molecular diffusion. We also show that concentration data may be acquired at any radial or axial position, not necessarily at the tracer gas injection point, and the resulting mean value of Deff/D is independent of the spatial position of the sampling catheter. This method is of similar accuracy and is substantially faster than previous methods for measuring gas dispersion in oscillatory flows. The rapidity of these measurements may permit this method to be used for the in vivo assessment of gas transport properties within the pulmonary system.

Construction and uses of a concentric catheter for gas sampling in lung airways.

A catheter for intra-airway sampling of gas concentrations was constructed from concentric polyethylene tubes. The internal tube (0.58 mm ID, 0.91 mm OD) was connected to a gas analyzer while the external tube (1.20 mm ID, 1.75 mm OD) was constantly flushed by air or a calibration gas, except during sampling. Injection and sampling dead spaces were 0.35 and 0.28 ml, respectively. Delay at 4-ml/min sampling rate was 4.0 +/- 0.2 s. The 0-90% step response to a sudden change in gas composition was 0.24 s when connected to a mass spectrometer. This catheter was used to assess tracer gas dispersion during oscillatory flow (1-20 Hz) in a straight long tube. Local concentrations measured through the catheter, after a small bolus of tracer gas was injected through the external tube, compared favorably with direct measurements through needles inserted via the tube wall and with theoretical predictions. The catheter was also used to measure intra-airway gas concentrations in dog airways during spontaneous breathing, conventional mechanical ventilation, high-frequency ventilation, high-frequency vibration ventilation, and constant-flow ventilation. It ws placed by a fiber-optic bronchoscope and used to measure local quasi-steady concentrations of CO2 and local dispersion with the bolus method. The occurrence of catheter clogging with secretions was substantially reduced with flow through the external tube. Transmitting a calibration gas through the external tube facilitated in situ recalibration of the gas analyzer without removing the catheter. The use of this catheter improved the efficiency and accuracy of measurements of gas concentrations inside lung airways.

Biomechanical aspects of Peyronie's disease in development stages and following reconstructive surgeries.

Peyronie's disease is a disorder of the penile connective tissues that leads to development of dense fibrous or ossified plaques in the tunica albuginea, causing penile deformity and painful erection. A biomechanical model of the penis was utilized for analyzing the mechanical stresses that develop within its soft tissues during erection in the presence of Peyronie's plaques. The model's simulations demonstrated stress concentrations around nerve roots and blood vessels due to the plaques. These stresses may irritate nerve endings or compress the vascular bed, and thus cause penile deformity and/or painful erection. The model was further used to elaborate the effects of different biological or artificial materials for reconstruction of the penis following plaque removal. Clinical applications of the present model can range from analysis of the etiology of the disease to assisting in the determination of optimal timing for therapeutic interventions and in the selection of patch material for penile reconstructions.

Predicting penile size during erection.

The aim of this prospective study was to identify clinical and engineering parameters of the flaccid penis for prediction of penile size during erection. Dorsal and ventral penile lengths, as well as base and tip circumferences were measured in flaccid states, gently stretched states and at full erection resulting from intracavernosal injection of prostaglandin E1 in 55 patients. The forces required to stretch the penis were measured by a specially designed gauge and regression relationships of the measured dimensions were calculated. An engineering model was developed to analyze differences between results obtained during stretching and erection, as well as to approximate the optimal force values which should be applied during the stretching part of the clinical evaluation of penile size. The ratio between the flaccid to stretched penile lengths was shown to be the best predictor for the ventral elongation from flaccid to erect penile lengths. The engineering analysis predicted that a minimal tension force of approximately 450 g during stretching of the penis is required to reach the potential erection length. The stretching forces exerted by the urologist in the clinical setting were experimentally shown to be significantly (P<0.01) less than this value. The values of the relative and absolute elongations of the stretched penis at its ventral aspect provide reliable estimations of its potential maximal elongation during erection. The model designed for this study may obviate the use of intracavernosal injections for estimating penile length during erection.

Characteristics of uterine peristalsis in spontaneous and induced cycles.

OBJECTIVE: To characterize the dynamics of the intrauterine fluid-wall interface (IUFWI) from in vivo transvaginal ultrasound images by new techniques of image processing of sagittal cross-sections of the uterus, in healthy women with normal cycles and patients treated with clomiphen citrate (CC). DESIGN: Clinical study. SETTING: An ultrasound unit in a large university-affiliated municipal hospital. PATIENT(S): Twenty-five patients with normal spontaneous cycles (group A) and nine patients treated by CC (group B). INTERVENTION(S): Transvaginal ultrasound examinations. MAIN OUTCOME MEASURE(S): Transvaginal ultrasound images were processed to carry out a computational analysis of the resultant IUFWI. RESULT(S): The amplitude and the width of the IUFWI were higher in group B, but the ratio of these measurements was similar in both groups. The frequency of wall motility of group A was lower and its pattern was more symmetrical than that of group B. CONCLUSION(S): The differences in the dynamic characteristics of spontaneous and CC-induced cycles may constitute an additional parameter that should be considered in embryo transport.

Possible detection of turbulent blood flow using multiparametric encoding gradients in MRI.

Magnetic resonance imaging (MRI) has significant potential as a highly accurate noninvasive flow measurement technique. Presented here is an approach to the imaging of turbulence in the velocity profiles. Recent publications have presented multiparametric encoding gradient methods, which are based on a deterministic rather than a statistical approach to spin motion. Following these methods of building up a general gradient from a basic set of gradients, the effects of turbulence and undetermined moments of motion on the image are discussed. Image blurring due to the nondeterministic behavior of spins (e.g., diffusion, turbulence) is not removed by these techniques, and this fact may be useful in identifying regions of turbulent flow, which are of importance in the clinical observation of cardiac and vascular haemodynamics. Due to its random nature, the elimination of turbulent effects by the use of a deterministic method is bound to fail. On the other hand, regions of turbulent flow may be identified due to signal decrease from those regions, provided one is careful to remove all the causes of nonturbulent signal reduction present due to nonturbulent flow moments. In the multiparametric phase encoding method, gradient amplitude tends to increase with higher moments of motion. The temporal behavior of these gradients is discussed, and it is suggested that the increase in their duration will enhance the encoding of higher motion terms at the expense of imaging time.