RESUMO
Multiple-step nucleation pathways have been observed during mineral formation in both inorganic and biomineral systems. These pathways can involve precursor aqueous species, amorphous intermediates, or metastable phases. Despite the widespread occurrence of these processes, elucidating the precise nucleation steps and the transformation mechanisms between each step remains a challenging task. Using a suite of potentiometric, microscopic, and spectroscopic tools, we studied the nucleation pathway of SrSO4 as a function of the physico-chemical solution parameters. Our observations reveal that below a threshold supersaturation, nucleation is driven by bound species, akin to the prenucleation cluster model, which directly leads to the formation of the stable phase celestine, SrSO4. At higher supersaturations, this situation is altered, with nucleation dominated by the consumption of free ions. Importantly, this change in nucleation mechanism is coupled to the formation of a hemihydrate metastable phase, SrSO4 · 1/2H2O, which eventually transforms into celestine, adhering to Ostwald's rule of stages. This transformation is a solution-mediated process, also occurring in the presence of a fluid film and is controlled by the physico-chemical parameters of the surrounding environment. It proceeds through the dissolution of the metastable phase and the de novo crystallization of the final phase. Overall, our results reveal that ion association taking place during the prenucleation stage dictates whether the nucleation pathway goes through an intermediate phase or not. This also underlines that although Ostwald's rule of stages is a common process, it is not a prerequisite for mineral formation-even in systems where it can occur.
RESUMO
Electron tomography in transmission electron microscopy provides valuable three-dimensional structural, morphological and chemical information of condensed matter at nanoscale. Current image acquisitions require at least tens of minutes, which prohibits the analysis of nano-objects evolving rapidly such as under dynamic environmental conditions. Reducing the acquisition duration to tens of seconds or less permits to follow in 3D the same object during its evolution under varying temperatures and pressures. We report Operando Electron nanotomography using image series acquired in less than 230 seconds instead of typically 15 min in the best cases so far. The in situ calcination of silica zeolites encaging silver nanoparticles, a catalytic nanosystem of potential interest for, e.g., nuclear waste treatments or selective heterogeneous catalysis, was successfully studied. Kinetic environmental Operando 3D electron microscopy becomes possible, as well as real time observation of beam sensitive samples (polymers, biological objects) without prior preparation, which reduces their contrast and reactivity.
RESUMO
Ceria is one of the world's most prominent material for applications in heterogeneous catalysis, as catalyst support or catalyst itself. Despite an exhaustive literature on the structure of reactive facets of CeO2 in line with its catalytic mechanisms, the temporal evolution of the atomic surface structure exposed to realistic redox conditions remains elusive. Here, we provide a direct visualization of the atomic mobility of cerium atoms on {100} surfaces of CeO2 nanocubes at room temperature in high vacuum, O2, and CO2 atmospheres in an environmental transmission electron microscope. Through quantification of the cationic mobility, we demonstrate the control of the surface dynamics under exposure to O2 and CO2 atmospheres, providing opportunities for a better understanding of the intimate catalytic mechanisms.
RESUMO
Measuring with a high accuracy the size distribution of small metallic nanoparticles loaded in a mesoporous metal oxide matrix is of particular interest for many studies related to new generations of interesting metamaterials. Transmission electron microscopy (TEM) is a powerful tool to determine the nature and morphology of very small particles, but their reliable and automatic identification in an inhomogeneous environment where the nanoparticle/background contrast locally varies is not straightforward. Here, we present how a quantitative analysis of high-angle annular dark field scanning TEM (HAADF STEM) images, accounting for the chemical sensitivity of the technique, can improve the accuracy of semiautomatic segmentation methods based on morphological processing to calculate size histograms. The paper also provides an estimate of the reliability of this method through the analysis of numerically synthesized images. The latter are based on the simulation of HAADF STEM projections of a volume filled with titania, pores and silver particles, whose morphological features, such as dimensions, shapes and densities are evaluated from experimental measurements of real samples. The results obtained with synthesized images prove the performances of the quantitative analysis to suppress nonsilver nanoparticles from the statistics and allow to infer empirical rules to determine imaging parameters that ensure a good reliability of histograms.
RESUMO
Pt nanoparticles in a Al2O3 dielectric matrix thin films are elaborated by means of atomic layer deposition. These nanostructured thin films are integrated in vertical and planar test structures in order to assess both their in-plane and out-of-plane electrical properties. A shadow edge evaporation process is used to develop planar devices with electrode separation distances in the range of 30 nm. Both vertical and planar test structures show a Poole-Frenkel conduction mechanism. Low trap energy levels (<0.1 eV) are identified for the two test structures which indicates that the Pt islands themselves are not acting as traps in the PF mechanism. Furthermore, a more than three order of magnitude current density difference is observed between the two geometries. This electrical anisotropy is attributed to a large electron mobility difference in the in-plane and out-of-plane directions which can be related to different trap distributions in both directions.
RESUMO
The atomic structure of CoPt and FePt nanoparticles (with a diameter between 2 and 5 nm) has been studied by transmission electron microscopy. The particles have been produced by a laser vaporization cluster source and annealed under vacuum in order to promote chemical ordering. For both alloys, we observe a coexistence of crystalline and multiply twinned particles with decahedral or icosahedral shapes. In addition to particles corresponding to a single L1(0) ordered domain, we put into evidence that even small particles can display several L1(0) domains. In particular, the chemical order can be preserved across twin boundaries which can give rise to spectacular chemically ordered decahedral particles made of five L1(0) domains. The stability of such structures, which had been recently predicted from theoretical simulations, is thus unambiguously experimentally confirmed.
RESUMO
Correlating the microstructure of an energy conversion device to its performance is often a complex exercise, notably in solid oxide fuel cell research. Solid oxide fuel cells combine multiple materials and interfaces that evolve in time due to high operating temperatures and reactive atmospheres. We demonstrate here that operando environmental transmission electron microscopy can identify structure-property links in such devices. By contacting a cathode-electrolyte-anode cell to a heating and biasing microelectromechanical system in a single-chamber configuration, a direct correlation is found between the environmental conditions (oxygen and hydrogen partial pressures, temperature), the cell open circuit voltage, and the microstructural evolution of the fuel cell, down to the atomic scale. The results shed important insights into the impact of the anode oxidation state and its morphology on the cell electrical properties.
RESUMO
The conditions in which degradation processes at the positive electrode/electrolyte interface occur are still incompletely understood and traditional surface analytical techniques struggle to characterize and depict accurately interfacial films. In the present work, information on the growth and evolution of the interphases upon storage and cycling as well as their electrochemical consequences are gathered in the case of LiNi(1/2)Mn(1/2)O(2) with commonly used LiPF(6) (1M in EC/DMC) electrolyte. The use of (7)Li, (19)F and (31)P MAS NMR, made quantitative through the implementation of empirical calibration, is combined with transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS) to probe the elements involved in surface species and to unravel the inhomogenous architecture of the interphase. At room temperature, contact with the electrolyte leads to a covering of the oxide surface first by LiF and lithiated organic species are found on the outer part of the interphase. At 55°C, not only the interphase proceeds in further covering of the surface but also thickens resulting in an increase of 240% of lithiated species and the presence of -POF(2) fluorophosphates. The composition gradient within the interphase depth is also strongly affected by the temperature. In agreement with the electrochemical performance, quantitative NMR surface analyses show that the use of LiBOB-modified electrolyte results in a Li-enriched interphase, intrinsically less resistive than the standard LiPF(6)-based interphase, comprised of a mixture of resistive LiF with non lithiated species.
Assuntos
Eletrodos , Eletrólitos/química , Lítio/química , Espectroscopia de Ressonância Magnética/métodos , Manganês/química , Teste de Materiais/métodos , Óxidos/química , Transição de FaseRESUMO
Drifts in the three directions (X, Y, Z) during the FIB-SEM slice-and-view tomography is an important issue in 3D-FIB experiments which may induce significant inaccuracies in the subsequent volume reconstruction and further quantification of morphological volume parameters of the sample microstructure. Cross-correlation is frequently applied directly to the cross-section image series for aligning FIB sliced images. This solution is hazardous and can be flawed as it has been easily demonstrated by a dedicated test experiment. As a result, a novel aligning procedure based on the quantification of the topography of the sample surface has been developed. This new approach will be compared to the common cross-correlation methods, as well as another approach consisting in using an artificial reference marker fabricated during the FIB procedure. All these methods will then be discussed in terms of accuracy and liability.
RESUMO
The size distribution of second phase precipitates is frequently determined using conventional transmission electron microscopy (CTEM). However, other techniques, which present different advantages, can also be used for this purpose. In this paper, we focus on high angle annular dark field (HAADF) in TEM and scanning TEM (STEM) in scanning electron microscopy (SEM) imaging modes. The mentioned techniques will be first described, then compared to more conventional ones for the measurement of carbides size distribution in two FeCV and FeCVNb model alloys. This comparative study shows that STEM in SEM, a technique much easier to undertake compared to TEM, is perfectly adapted for size distribution measurements of second phase particles, with sizes ranging between 5 and 200 nm in these systems.
RESUMO
The differential scattering cross section in electron energy loss near edge spectroscopy (ELNES) generally depends on the orientation of the Q wave vector transferred from the incident electron to an atomic core electron. In the case where the excited atom belongs to a threefold, fourfold or sixfold main rotation axis, the dipole cross section depends on the angle of Q with respect to this axis. In this paper, we restrict to this situation called dichroism. Furthermore, if we take into account the relativistic effects due to the high incident electron velocity, this dipole cross section also depends on the angle of Q with respect to the electron beam axis. It is due to these dependences that the shape of measured electron energy loss spectra varies with the electron beam incidence, the collector aperture, the incident beam convergence and the incident electron energy. The existence of a particular beam incidence angle for which the scattering cross section becomes independent of collection and beam convergence semi-angles is clearly underscored. Conversely, it is shown that EELS spectra do not depend on the beam incidence angle for a set of particular values of collection and convergence semi-angles. Particularly, in the case of a parallel incident beam, there is a collection semi-angle (often called magic angle) for which the cross section becomes independent of the beam orientation. This magic angle depends on the incident beam kinetic energy. If the incident electron velocity V is small compared with the light velocity c, this magic angle is about 3.975theta(E) (theta(E) is the scattering angle). It decreases to 0 when V approaches c. These results are illustrated in the case of the K boron edge in the boron nitride.
RESUMO
Micro-alloying steels allow higher strength to be achieved, with lower carbon contents, without a loss in toughness, weldability or formability through the generation of a fine ferrite grain size with additional strengthening being provided by the fine scale precipitation of complex carbo-nitride particles. Niobium is reported to be the most efficient micro-alloying element to achieve refinement of the final grain structure. A detailed microscopic investigation is one of the keys for understanding the first stages of the precipitation sequence, thus transmission electron microscopy (TEM) is required. Model Fe-(Nb,C) and Fe-(Nb,C,N) ferritic alloys have been studied after annealing under isothermal conditions. However the nanometre scale dimensions of the particles makes their detection, structural and chemical characterization delicate. Various imaging techniques have then been employed. Conventional TEM (CTEM) and high resolution TEM (HRTEM) were used to characterise the morphology, nature and repartition of precipitates. Volume fractions and a statistical approach to particle size distributions of precipitates have been investigated by energy filtered TEM (EFTEM) and high angle annular dark field (HAADF) imaging. Great attention was paid to the chemical analysis of precipitates; their composition has been quantified by electron energy loss spectroscopy (EELS), on the basis of calibrated 'jump-ratios' of C-K and N-K edges over the Nb-M edge, using standards of well-defined compositions. It is shown that a significant addition of nitrogen in the alloy leads to a complex precipitation sequence, with the co-existence of two populations of particles: pure nitrides and homogeneous carbo-nitrides respectively.
RESUMO
This paper describes a fast and one-step technique to grow single gold filaments at the apex of commercial conductive AFM tips. It is implemented with an atomic force microscope in air with a high relative humidity at room temperature and is based on a bias-assisted electro-reduction of gold ions directly at the tip apex. The technique requires only ad hoc substrates made of a mesoporous silica layer loaded with gold salt deposited on a conductive electrode. It leads to the growth, at the tip apex, of filaments whose length can be monitored and controlled during the growth between tens and hundreds of nanometers and whose radius of curvature can be as low as 3 nm. Made of polycrystalline gold nanostructures, the filaments are chemically and mechanically stable and conductive.
RESUMO
A new method, which we name ion CHanneling ORientation Determination (iCHORD), is proposed to obtain orientation maps on polycrystals via ion channeling. The iChord method exploits the dependence between grain orientation and ion beam induced secondary electron image contrast. At each position of the region of interest, intensity profiles are obtained from a series of images acquired with different orientations with respect to the ion beam. The profiles are then compared to a database of theoretical profiles of known orientation. The Euler triplet associated to the most similar theoretical profile gives the orientation at that position. The proof-of-concept is obtained on a titanium nitride sample. The potentialities of iCHORD as an alternative to EBSD are then discussed.
RESUMO
A new STEM XEDS tomography technique is proposed thanks to the implementation of multi EDX SDD detectors in analytical TEMs. The technique flow is presented and the first results obtained on a 28nm FDSOI transistor are detailed. The latter are compared with 2D XEDS analysis to demonstrate the interest of the slice extraction in all directions from a large analyzed volume without any 3D overlap effect issues.
RESUMO
Anisotropic effects in hexagonal aluminium nitride have been studied by electron energy-loss spectroscopy (EELS) in the N-K energy loss near edge structure (ELNES). Experimental data acquired with different collection angles and with a nearly parallel incident electron beam aligned along the c-axis have been compared to simulations based on ab initio calculations. The extraction of intrinsic parallel I|| (with momentum transfer q || c axis) and perpendicular I perpendicular (with momentum transfer q perpendicular c axis) components has been performed directly from the experimental spectra. This has been done according to their description as linear combinations of I|| and I perpendicular, with adequate weights deduced from a geometrical model of anisotropic behaviour.