Enhancing maize resilience to drought stress: the synergistic impact of deashed biochar and carboxymethyl cellulose amendment.

Drought stress poses a significant challenge to maize production, leading to substantial harm to crop growth and yield due to the induction of oxidative stress. Deashed biochar (DAB) in combination with carboxymethyl cellulose (CMC) presents an effective approach for addressing this problem. DAB improves soil structure by increasing porosity and water retention and enhancing plant nutrient utilization efficiency. The CMC provides advantages to plants by enhancing soil water retention, improving soil structure, and increasing moisture availability to the plant roots. The present study was conducted to investigate the effects of DAB and CMC amendments on maize under field capacity (70 FC) and drought stress. Six different treatments were implemented in this study, namely 0 DAB + 0CMC, 25 CMC, 0.5 DAB, 0.5 DAB + 25 CMC, 1 DAB, and 1 DAB + 25 CMC, each with six replications, and they were arranged according to a completely randomized design. Results showed that 1 DAB + 25 CMC caused significant enhancement in maize shoot fresh weight (24.53%), shoot dry weight (38.47%), shoot length (32.23%), root fresh weight (19.03%), root dry weight (87.50%) and root length (69.80%) over control under drought stress. A substantial increase in maize chlorophyll a (40.26%), chlorophyll b (26.92%), total chlorophyll (30.56%), photosynthetic rate (21.35%), transpiration rate (32.61%), and stomatal conductance (91.57%) under drought stress showed the efficiency of 1 DAB + 25 CMC treatment compared to the control. The enhancement in N, P, and K concentrations in both the root and shoot validated the effectiveness of the performance of the 1 DAB + 25 CMC treatment when compared to the control group under drought stress. In conclusion, it is recommended that the application of 1 DAB + 25 CMC serves as a beneficial amendment for alleviating drought stress in maize.

Modulations of wheat growth by selenium nanoparticles under salinity stress.

Salinity stress is a prominent environmental factor that presents obstacles to the growth and development of plants. When the soil contains high salt concentrations, the roots face difficulties in absorbing water, resulting in water deficits within the plant tissues. Consequently, plants may experience inhibited growth, decreased development, and a decline in biomass accumulation. The use of nanoparticles has become a popular amendment in recent times for the alleviation of salinity stress. The study investigated the biological approach for the preparation of Se nanoparticles (NP) and their effect on the growth of wheat plants under saline conditions. The leaf extract of lemon (Citrus limon L.) was used for the green synthesis of selenium nanoparticles (Se-NPs). The synthesized NPs were characterized by X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) and were applied foliar in the range of 0.01%, 0.05% and 0.1% on wheat plants. Results showed that 0.1% SeNP alone exhibited a significantly higher yield per plant, biomass per plant, 1000 grains weight, chlorophyll a, chlorophyll b and total chlorophyll over the SS (salt stress) control. A significant decline in MDA and H2O2 also validated the effectiveness of 0.1% SeNP over the SS control.

Effect of carboxymethyl cellulose and gibberellic acid-enriched biochar on osmotic stress tolerance in cotton.

The deleterious impact of osmotic stress, induced by water deficit in arid and semi-arid regions, poses a formidable challenge to cotton production. To protect cotton farming in dry areas, it's crucial to create strong plans to increase soil water and reduce stress on plants. The carboxymethyl cellulose (CMC), gibberellic acid (GA3) and biochar (BC) are individually found effective in mitigating osmotic stress. However, combine effect of CMC and GA3 with biochar on drought mitigation is still not studied in depth. The present study was carried out using a combination of GA3 and CMC with BC as amendments on cotton plants subjected to osmotic stress levels of 70 (70 OS) and 40 (40 OS). There were five treatment groups, namely: control (0% CMC-BC and 0% GA3-BC), 0.4%CMC-BC, 0.4%GA3-BC, 0.8%CMC-BC, and 0.8%GA3-BC. Each treatment was replicated five times with a completely randomized design (CRD). The results revealed that 0.8 GA3-BC led to increase in cotton shoot fresh weight (99.95%), shoot dry weight (95.70%), root fresh weight (73.13%), and root dry weight (95.74%) compared to the control group under osmotic stress. There was a significant enhancement in cotton chlorophyll a (23.77%), chlorophyll b (70.44%), and total chlorophyll (35.44%), the photosynthetic rate (90.77%), transpiration rate (174.44%), and internal CO2 concentration (57.99%) compared to the control group under the 40 OS stress. Thus 0.8GA3-BC can be potential amendment for reducing osmotic stress in cotton cultivation, enhancing agricultural resilience and productivity.

Enhancing saline stress tolerance in soybean seedlings through optimal NH4+/NO3- ratios: a coordinated regulation of ions, hormones, and antioxidant potential.

BACKGROUND: Nitrogen (N) availability is crucial in regulating plants' abiotic stress resistance, particularly at the seedling stage. Nevertheless, plant responses to N under salinity conditions may vary depending on the soil's NH4+ to NO3- ratio. METHODS: In this study, we investigated the effects of different NH4+:NO3- ratios (100/0, 0/100, 25/75, 50/50, and 75/25) on the growth and physio-biochemical responses of soybean seedlings grown under controlled and saline stress conditions (0-, 50-, and 100-mM L- 1 NaCl and Na2SO4, at a 1:1 molar ratio). RESULTS: We observed that shoot length, root length, and leaf-stem-root dry weight decreased significantly with increased saline stress levels compared to control. Moreover, there was a significant accumulation of Na+, Cl-, hydrogen peroxide (H2O2), and malondialdehyde (MDA) but impaired ascorbate-glutathione pools (AsA-GSH). They also displayed lower photosynthetic pigments (chlorophyll-a and chlorophyll-b), K+ ion, K+/Na+ ratio, and weakened O2•--H2O2-scavenging enzymes such as superoxide dismutase, catalase, peroxidase, monodehydroascorbate reductase, glutathione reductase under both saline stress levels, while reduced ascorbate peroxidase, and dehydroascorbate reductase under 100-mM stress, demonstrating their sensitivity to a saline environment. Moreover, the concentrations of proline, glycine betaine, total phenolic, flavonoids, and abscisic acid increased under both stresses compared to the control. They also exhibited lower indole acetic acid, gibberellic acid, cytokinins, and zeatine riboside, which may account for their reduced biomass. However, NH4+:NO3- ratios caused a differential response to alleviate saline stress toxicity. Soybean seedlings supplemented with optimal ratios of NH4+:NO3- (T3 = 25:75 and T = 4 50:50) displayed lower Na+ and Cl- and ABA but improved K+ and K+/Na+, pigments, growth hormones, and biomass compared to higher NH4+:NO3- ratios. They also exhibited higher O2•--H2O2-scavenging enzymes and optimized H2O2, MDA, and AsA-GSH pools status in favor of the higher biomass of seedlings. CONCLUSIONS: In summary, the NH4+ and NO3- ratios followed the order of 50:50 > 25:75 > 0:100 > 75:25 > 100:0 for regulating the morpho-physio-biochemical responses in seedlings under SS conditions. Accordingly, we suggest that applying optimal ratios of NH4+ and NO3- (25/75 and 50:50) can improve the resistance of soybean seedlings grown in saline conditions.

TALE gene family: identification, evolutionary and expression analysis under various exogenous hormones and waterlogging stress in Cucumis sativus L.

BACKGROUND: Three Amino acid Loop Extension (TALE) belongs to the homeobox group of genes that are important constituents of plant systems. The TALE gene family is instrumental not only in growth and development but also plays an essential role in regulating plant response to environmental adversaries. RESULTS: In the present study, we isolated 21 CsTALE genes from the cucumber (Cucumis sativus L.) genome database. Bioinformatics tools were put in place to understand the structural and functional components of the CsTALE gene family. The evolutionary analysis dissected them into seven subclades (KNOX-I, KNOX-II, and BELL-I to BELL-V). The cis-acting elements in the promoter region of CsTALE genes disclosed that they are key regulators of hormonal and stress-related processes. Additionally, the STRING database advocated the concerting role of CsTALE proteins with other key transcription factors potent in plant developmental biology. The CsmiR319 and CsmiR167a-3p targeting the CsTALE15 and CsTALE16, respectively, further assert the importance of the CsTALE gene family posttranscriptional-related processes. Tissue-specific gene expression unfolded the fundamental involvement of CsTALE genes as they were expressed throughout the developmental stages. Under waterlogging stress, the CsTALE17 expressed significantly higher values in WL, WL-NAA, and WL-ETH but not in WL-MeJA-treated samples. CONCLUSIONS: The present study reveals the evolution and functions of the CsTALE gene family in cucumber. Our work will provide a platform that will help future researchers address the issue of waterlogging stress in the Yangtze River Delta.

Germination responses of Lens Culiunaris L. seeds to osmotic potentials at cardinal temperatures using hydrothermal time model.

BACKGROUND: Lentil is a significant legume that are consumed as a staple food and have a significant economic impact around the world. The purpose of the present research on lentil was to assess the hydrothermal time model's capacity to explain the dynamics of Lens culinaris L. var. Markaz-09 seed germination, as well as to ascertain the germination responses at various sub-optimal temperatures (T) and water potentials (Ψ). In order to study lentil seed germination (SG) behavior at variable water potentials (Ψs) and temperatures (Ts). A lab experiment employing the hydrothermal time model was created. Seeds were germinated at six distinct temperatures: 15 0С, 20 0С, 25 0С, 30 0С, 35 0С, and 40 0С, with five Ψs of 0, -0.3, -0.6, -0.9, and - 1.2 MPa in a PEG-6000 (Polyethylene glycol 6000) solution. RESULTS: The results indicated that the agronomic parameters like Germination index (GI), Germination energy (GE), Timson germination index (TGI), were maximum in 25 0C at (-0.9 MPa) and lowest at 40 0C in 0 MPa. On other hand, mean germination time (MGT) value was highest at 15 0C in -1.2 MPa and minimum at 40 0C in (-0.6 MPa) while Mean germination rate (MGR) was maximum at 40 0C in (0 MPa) and minimum at 15 0C in (-0.6 MPa). CONCLUSIONS: The HTT model eventually defined the germination response of Lens culinaris L. var. Markaz-09 (Lentil) for all Ts and Ψs, allowing it to be employed as a predictive tool in Lens culinaris L. var. Markaz-09 (Lentil) seed germination simulation models.

Enhancing nitrogen use efficiency and yield of maize (Zea mays L.) through Ammonia volatilization mitigation and nitrogen management approaches.

Management of nitrogen (N) fertilizer is a critical factor that can improve maize (Zea mays L.) production. On the other hand, high volatilization losses of N also pollute the air. A field experiment was established using a silt clay soil to examine the effect of sulfur-coated urea and sulfur from gypsum on ammonia (NH3) emission, N use efficiency (NUE), and the productivity of maize crop under alkaline calcareous soil. The experimental design was a randomized complete block (RCBD) with seven treatments in three replicates: control with no N, urea150 alone (150 kg N ha-1), urea200 alone (200 kg N ha-1), urea150 + S (60 kg ha-1 S from gypsum), urea200 + S, SCU150 (sulfur-coated urea) and SCU200. The results showed that the urea150 + S and urea200 + S significantly reduced the total NH3 by (58 and 42%) as compared with the sole application urea200. The NH3 emission reduced further in the treatment with SCU150 and SCU200 by 74 and 65%, respectively, compared to the treatment with urea200. The maize plant biomass, grain yield, and total N uptake enhanced by 5-14%, 4-17%, and 7-13, respectively, in the treatments with urea150 + s and urea200 + S, relative to the treatment with urea200 alone. Biomass, grain yield, and total N uptake further increased significantly by 22-30%, 25-28%, and 26-31%, respectively, in the treatments with SCU150 and SCU200, relative to the treatment with urea200 alone. The applications of SCU150 enhanced the nitrogen use efficiency (NUE) by (72%) and SCU200 by (62%) respectively, compared with the sole application of urea200 alone. In conclusion, applying S-coated urea at a lower rate of 150 kg N ha-1 compared with a higher rate of 200 kg N ha-1 may be an effective way to reduce N fertilizer application rate and mitigate NH3 emission, improve NUE, and increase maize yield. More investigations are suggested under different soil textures and climatic conditions to declare S-coated urea at 150 kg N ha-1 as the best application rate for maize to enhance maize growth and yield.

Salicylic acid and Tocopherol improve wheat (Triticum aestivum L.) Physio-biochemical and agronomic features grown in deep sowing stress: a way forward towards sustainable production.

BACKGROUND: The rate of germination and other physiological characteristics of seeds that are germinating are impacted by deep sowing. Based on the results of earlier studies, conclusions were drawn that deep sowing altered the physio-biochemical and agronomic characteristics of wheat (Triticum aestivum L.). RESULTS: In this study, seeds of wheat were sown at 2 (control) and 6 cm depth and the impact of exogenously applied salicylic acid and tocopherol (Vitamin-E) on its physio-biochemical and agronomic features was assessed. As a result, seeds grown at 2 cm depth witnessed an increase in mean germination time, germination percentage, germination rate index, germination energy, and seed vigor index. In contrast, 6 cm deep sowing resulted in negatively affecting all the aforementioned agronomic characteristics. In addition, deep planting led to a rise in MDA, glutathione reductase, and antioxidants enzymes including APX, POD, and SOD concentration. Moreover, the concentration of chlorophyll a, b, carotenoids, proline, protein, sugar, hydrogen peroxide, and agronomic attributes was boosted significantly with exogenously applied salicylic acid and tocopherol under deep sowing stress. CONCLUSIONS: The results of the study showed that the depth of seed sowing has an impact on agronomic and physio-biochemical characteristics and that the negative effects of deep sowing stress can be reduced by applying salicylic acid and tocopherol to the leaves.

Luminescence-Based Infrared Thermal Sensors: Comprehensive Insights.

Recent chronological breakthroughs in materials innovation, their fabrication, and structural designs for disparate applications have paved transformational ways to subversively digitalize infrared (IR) thermal imaging sensors from traditional to smart. The noninvasive IR thermal imaging sensors are at the cutting edge of developments, exploiting the abilities of nanomaterials to acquire arbitrary, targeted, and tunable responses suitable for integration with host materials and devices, intimately disintegrate variegated signals from the target onto depiction without any discomfort, eliminating motional artifacts and collects precise physiological and physiochemical information in natural contexts. Highlighting several typical examples from recent literature, this review article summarizes an accessible, critical, and authoritative summary of an emerging class of advancement in the modalities of nano and micro-scale materials and devices, their fabrication designs and applications in infrared thermal sensors. Introduction is begun covering the importance of IR sensors, followed by a survey on sensing capabilities of various nano and micro structural materials, their design architects, and then culminating an overview of their diverse application swaths. The review concludes with a stimulating frontier debate on the opportunities, difficulties, and future approaches in the vibrant sector of infrared thermal imaging sensors.

Podosphaera xanthii Causing Powdery Mildew on Salvia farinacea in Central China.

Salvia farinacea, commonly referred as mealycup sage, is a perennial herbaceous plant belonging to the Salvia genus of the Lamiaceae family. It originates from the Mediterranean region, North America, and Europe and is globally cultivated due to its appealing and captivating flowers. Moreover, mealycup sage is utilized as traditional Chinese medicinal plant for treatment of cardiovascular diseases (Li et al. 2018). In October 2023, powdery mildew-like symptoms were observed on Salvia farinacea plants cultivated in a garden located in Xinxiang City, Henan Province, China (113.93, 35.29). The leaves were covered with white and thin masses of mycelia, conidiophores and conidia of the fungus. About 100 plants were checked and 90 % were infected. There were a large number of white colonies with irregular or continuous round lesions on the adaxial and abaxial surfaces of the leaves, covering approximately 80% of the leaf area. The slightly or straight curved conidiophores (n = 30) were 46 to 145× 8 to 11 µm in size and consisted of foot cells, shorter cells and conidia. The ellipsoidal to oval conidia (n = 30), containing fibrosin bodies, were 24 to 35 × 12 to 19 µm in size and had a length/width ratio of 1.8 to 2.1. No chasmothecia were observed on leaves. These morphological features were consistent with those of Podosphaera xanthii (Braun and Cook 2012). Following the previously described method (White et al. 1990; Bradshaw et al. 2022; Zhu et al. 2022a), the sequences of ITS and Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) regions were amplified with specific primers ITS1/ITS4 (ITS1 5'-TCCGTAGGTGAACCTGCGG-3' ; ITS4 5'-TCCTCCGCTTATTGATATGC-3') and PMGAPDH1/PMGAPDH3R (PMGAPDH1 5'-GGAATGGCTATGCGTGTACC-3'; PMGAPDH3R 5'-CCCCATTCGTTGTCGTACCATG-3'), and the resulting sequences were uploaded in GenBank (Accession No. OR761885 and PP236082, respectively). BLASTn analysis showed that the sequence shared 560/565 (99%) and 272/272 (100%) homology with P. xanthii (MW301281) on Impatiens balsamina (Zhu et al. 2022b) and with P. xanthii (ON075658) on Cucumis melo (Bradshaw et al. 2022), respectively. The phylogenetic analysis clearly illustrated that the collected isolate of P. xanthii clustered in the same clade. The pathogenicity was tested according to the method previously described (Zhu et al. 2021). The fungus was inoculated onto the leaf surfaces of three healthy plants by blowing conidia from infected leaves with pressurized air. Non-inoculated plants were treated as control. Both the control and inoculated plants were separately placed in growth chambers under 60% humidity; light/dark, 16 h/8 h; and a temperature of 18°C. After a period of 12-15 days, the leaves of the inoculated plants exhibited signs of powdery mildew, whereas the control group remained unaffected. Therefore, the fungal pathogen was identified and confirmed as P. xanthii (isolate PXSF202310). Previously, P. xanthii was reported on Impatiens balsamina and S. farinacea from China and Korea (Zhu et al. 2021; Choi et al. 2022). As far as we know, this is the first documentation of P. xanthii on S. farinacea in central China. The presence of P. xanthii can lead to a deterioration in plant health and stunted growth, thereby negatively impacting both the decorative and medicinal value of S. farinacea. The recognition of P. xanthii on S. farinacea enhances our comprehension of this pathogen hosts and provides fundamental information for forthcoming disease control studies.

Biocontrol potential of Cladosporium sphaerospermum against the wheat powdery mildew fungus Blumeria graminis f. sp. tritici.

Cladosporium spp. are known to be mycoparasites and inhibit phytopathogenic fungi. However, so far, little information is available on the impacts of Cladosporium spp. on powdery mildews. Based on the morphological characteristics and molecular analysis, C. sphaerospermum was identified as a mycoparasite on the wheat powdery mildew fungus (Blumeria graminis f. sp. tritici, Bgt, recently named as B. graminis s. str.). C. sphaerospermum was capable of preventing colony formation and conidial distribution of Bgt. The biomasses of Bgt notably decreased by 1.3, 2.2, 3.6 and 3.8 times at 2 dpi, 4 dpi, 6 dpi and 8 dpi, respectively. In addition, biomasses of C. sphaerospermum at 2 dpi, 4 dpi, 6 dpi and 8 dpi significantly increased to 5.6, 13.9, 18.2 and 67.3 times, respectively. In vitro, C. sphaerospermum exudates significantly impaired appressorial formation of Bgt. Thus, C. sphaerospermum acts as a potential biological control agent by suppressing the formation, distribution and development of Bgt conidia and is a viable alternative for managing the wheat powdery mildew. These results suggest that C. sphaerospermum is an antagonistic parasite of the wheat powdery mildew fungus, and hence, provide new knowledge about the biological control of phytopathogenic fungi.

Powdery Mildew of Xanthium strumarium Caused by Podosphaera xanthii in central China.

Xanthium strumarium, known as cocklebur, is an annual herb and has been used in traditional Chinese medicine. In October 2020, powdery mildew-like disease signs and symptoms were observed on X. strumarium grown in a crop field, Xinxiang city, Henan Province, China (35.36076° N, 113.93467° E). The specimen (PX-XS2023) was stored in Xinxiang Key Laboratory of Plant Stress Biology. White colonies in irregular or coalesced circular shaped-lesions were abundant on both ad- and abaxial surfaces of leaves and covered up to 99 % of the leaf area. Some of the infected leaves were senesced. More than 70 % of plants (n = 130) exhibited these signs and symptoms. Conidiophores were straight or slightly curved, 55 to 160 × 11 to 13 µm composed of foot-cells, shorter cells and conidia. Conidia were ellipsoid to oval, 29 to 40 × 14 to 20 µm (n = 50), with a length/width ration of 2.0 to 2.5, containing fibrosin bodies. Dark brown to black chasmothecia were found on infected leaves. The appendages were mycelium-shaped and at the base of scattered or gregarious chasmothecia (n = 50, 70 to 120 µm in diameter). Asci were 55 to 80 × 50 to 65 µm (n=30). These morphological characteristics were consistent with those of Podosphaera xanthii (Braun and Cook 2012). The internal transcribed spacer (ITS) region and Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) region of the fungus (PX-XS2023) were amplified and sequenced with primers ITS1/ITS4 (White et al. 1990) and GAPDH1/GAPDH3R (Bradshaw et al. 2022) according to a previously reported method (Zhu et al. 2022). The resulting sequences were respectively deposited into GenBank (Accession No. MW300956 and PP236083). BLASTn analysis indicated that the sequences were respectively 99.82 % (564/565) and 100% (272/272) identical to P. xanthii (MT260063 and ON075658). The phylogenetic analysis indicated that the strain PX-XS2023 and P. xanthii were clustered into a same branch. Therefore, the causal agent of powdery mildew on X. strumarium was P. xanthii. To conduct pathogenicity assays, mature leaves of five healthy X. strumarium (height in 50 centimeters) were inoculated with fungal conidia by gently pressing surfaces of infested leaves onto leaves of healthy plants (Zhu et al. 2020). Five untreated plants served as controls. The controls and inoculated plants were separately maintained in greenhouses (humidity, 60%; light/dark, 16 h/8 h; temperature, 18°C). Eight days post-inoculation, signs of powdery mildew were detectable on inoculated plants, however, the controls were asymptomatic. Thus, the fungal pathogen was morphologically and molecularly identified and confirmed as P. xanthii. This powdery mildew caused by P. xanthii was previously reported on X. strumarium in Korea, Russia and India (Farr and Rossman, 2021). In addition, P. xanthii was recorded on X. strumarium in Xinjiang Province, China (Tai 1979). However, this is the first report of P. xanthii on X. strumarium in central China, where is around 3000 km away from Xinjiang Province with geographically differences. The sudden presence of powdery mildew caused by P. xanthii may adversely affect plant health and thus reduce medical value of X. strumarium. Therefore, the identification and confirmation of P. xanthii infecting X. strumarium enhance the knowledge on the hosts of this pathogen in China and will provide fundamental information for disease control in the future.

Exploring Sustainable Agriculture with Nitrogen-Fixing Cyanobacteria and Nanotechnology.

The symbiotic relationship between nitrogen-fixing cyanobacteria and plants offers a promising avenue for sustainable agricultural practices and environmental remediation. This review paper explores the molecular interactions between nitrogen-fixing cyanobacteria and nanoparticles, shedding light on their potential synergies in agricultural nanotechnology. Delving into the evolutionary history and specialized adaptations of cyanobacteria, this paper highlights their pivotal role in fixing atmospheric nitrogen, which is crucial for ecosystem productivity. The review discusses the unique characteristics of metal nanoparticles and their emerging applications in agriculture, including improved nutrient delivery, stress tolerance, and disease resistance. It delves into the complex mechanisms of nanoparticle entry into plant cells, intracellular transport, and localization, uncovering the impact on root-shoot translocation and systemic distribution. Furthermore, the paper elucidates cellular responses to nanoparticle exposure, emphasizing oxidative stress, signaling pathways, and enhanced nutrient uptake. The potential of metal nanoparticles as carriers of essential nutrients and their implications for nutrient-use efficiency and crop yield are also explored. Insights into the modulation of plant stress responses, disease resistance, and phytoremediation strategies demonstrate the multifaceted benefits of nanoparticles in agriculture. Current trends, prospects, and challenges in agricultural nanotechnology are discussed, underscoring the need for responsible and safe nanoparticle utilization. By harnessing the power of nitrogen-fixing cyanobacteria and leveraging the unique attributes of nanoparticles, this review paves the way for innovative, sustainable, and efficient agricultural practices.

γ-Aminobutyric acid (GABA) and ectoine (ECT) impacts with and without AMF on antioxidants, gas exchange attributes and nutrients of cotton cultivated in salt affected soil.

Salinity stress is one of the major hurdles in agriculture which adversely affects crop production. It can cause osmotic imbalance, ion toxicity that disrupts essential nutrient balance, impaired nutrient uptake, stunted growth, increased oxidative stress, altered metabolism, and diminished crop yield and quality. However, foliar application of osmoprotectant is becoming popular to resolve this issue in crops. These osmoprotectants regulate the cellular osmotic balance and protect plants from the detrimental effects of high salt concentrations. Furthermore, the role of arbuscular mycorrhizae (AMF) is also established in this regard. These AMF effectively reduce the salinity negative effects by improving the essential nutrient balance via the promotion of root growth. That's why keeping in mind the effectiveness of osmoprotectants current study was conducted on cotton. Total of six levels of γ-Aminobutyric acid (GABA = 0 mM, 0. 5 mM, and 1 mM) and ectoine (ECT = 0 mM, 0.25 mM, and 0.5 mM) were applied as treatments in 3 replications. Results showed that 0.5 mM γ-Aminobutyric acid and ectoine performed significantly best for the improvement in cotton growth attributes. It also caused significant enhancement in K and Ca contents of the leaf, stem, bur, and seeds compared to the control. Furthermore, 0.5 mM γ-Aminobutyric acid and ectoine also caused a significant decline in Cl and Na contents of leaf, stem, bur, and seeds of cotton compared to control under salinity stress. A significant enhancement in chlorophyll contents, gas exchange attributes, and decline in electrolyte leakage validated the effectiveness of 0.5 mM γ-Aminobutyric acid and ectoine over control. In conclusion, 0.5 mM γ-Aminobutyric acid and ectoine have the potential to mitigate the salinity stress in cotton.

Utilizing hydrothermal time models to assess the effects of temperature and osmotic stress on maize (Zea mays L.) germination and physiological responses.

The application of germination models in economic crop management makes them extremely useful for predicting seed germination. Hence, we examined the effect of varying water potentials (Ψs; 0. - 0.3, - 0.6, - 0.9, - 1.2 MPa) and temperatures (Ts; 20, 25, 30, 35, 40 °C) on maize germination and enzymatic antioxidant mechanism. We observed that varying Ts and Ψs significantly influenced germination percentage (GP) and germination rate (GR), and other germination parameters, including germination rate index (GRI), germination index (GI), mean germination index (MGI), mean germination time (MGT), coefficient of the velocity of germination (CVG), and germination energy (GE) (p ≤ 0.01). Maximum (87.60) and minimum (55.20) hydro-time constant (θH) were reported at 35 °C and 20 °C, respectively. In addition, base water potential at 50 percentiles was highest at 30 °C (15.84 MPa) and lowest at 20 °C (15.46 MPa). Furthermore, the optimal, low, and ceiling T (To, Tb and Tc, respectively) were determined as 30 °C, 20 °C and 40 °C, respectively. The highest θT1 and θT2 were reported at 40 °C (0 MPa) and 20 °C (- 0.9 MPa), respectively. HTT has a higher value (R2 = 0.43 at 40 °C) at sub-optimal than supra-optimal temperatures (R2 = 0.41 at 40 °C). Antioxidant enzymes, including peroxidase (POD), catalase (CAT), superoxide dismutase (SOD), ascorbate peroxidase (APX), and glutathione peroxidase (GPX), increased with decreasing Ψs. In contrast, CAT and POD were higher at 20 °C and 40 °C but declined at 25, 30, and 35 °C. The APX and GPX remained unchanged at 20, 25, 30, and 40 °C but declined at 35 °C. Thus, maintaining enzymatic activity is a protective mechanism against oxidative stress. A decline in germination characteristics may result from energy diverting to anti-stress tools (antioxidant enzymes) necessary for eliminating reactive oxygen species (ROS) to reduce salinity-induced oxidative damage. The parameters examined in this study are easily applicable to simulation models of Z. mays L. germination under extreme environmental conditions characterized by water deficits and temperature fluctuations.

Modulation of sunflower growth via regulation of antioxidants, oil content and gas exchange by arbuscular mycorrhizal fungi and quantum dot biochar under chromium stress.

Chromium (Cr) toxicity significantly threatens sunflower growth and productivity by interfering with enzymatic activity and generating reactive oxygen species (ROS). Zinc quantum dot biochar (ZQDB) and arbuscular mycorrhizal fungi (AMF) have become popular to resolve this issue. AMF can facilitate root growth, while biochar tends to minimize Cr mobility in soil. The current study aimed to explore AMF and ZQDB combined effects on sunflower plants in response to Cr toxicity. Four treatments were applied, i.e. NoAMF + NoZQDB, AMF + 0.40%ZQDB, AMF + 0.80%ZQDB, and AMF + 1.20%ZQDB, under different stress levels of Cr, i.e. no Cr (control), 150 and 200 mg Cr/kg soil. Results showed that AMF + 1.20%ZQDB was the treatment that caused the greatest improvement in plant height, stem diameter, head diameter, number of leaves per plant, achenes per head, 1000 achenes weight, achene yield, biological yield, transpiration rate, stomatal conductance, chlorophyll content and oleic acid, relative to the condition NoAMF + No ZQDB at 200 mg Cr/kg soil. A significant decline in peroxidase (POD), superoxide dismutase (SOD), and catalase (CAT) while improvement in ascorbate peroxidase (APx), oil content, and protein content further supported the effectiveness of AMF + 1.20%ZQDB against Cr toxicity. Our results suggest that the treatment AMF + 1.20%ZQDB can efficiently alleviate Cr stress in sunflowers.

Influence of polyvinyl chloride microplastic on chromium uptake and toxicity in sweet potato.

The extensive use of plastic products and rapid industrialization have created a universal concern about microplastics (MPs). MPs can pose serious environmental risks when combined with heavy metals. However, current research on the combined effects of MPs and hexavalent chromium [Cr(VI)] on plants is insufficient. Herein, a 14-day hydroponic experiment was conducted to investigate the impact of PVC MPs (100 and 200 mg/L) and Cr(VI) (5, 10, and 20 µM) alone and in combination on sweet potato. Results showed that combined Cr(VI) and PVC MPs affected plant growth parameters significantly, but PVC MPs alone did not. The combined application of PVC MPs and Cr(VI) resulted in a decrease in plant height (24-65%), fresh biomass per plant (36-71%), and chlorophyll content (16-34%). Cr(VI) bioaccumulation increased with the increase in its doses, with the highest concentration of Cr(VI) in the leaves (16.45 mg/kg), stems (13.81 mg/kg), and roots (236.65 mg/kg). Cr(VI) and PVC MPs-induced inhibition varied with Cr(VI) and PVC MPs doses. Osmolytes and antioxidants, lipid peroxidation, and H2O2 contents were significantly increased, while antioxidant enzymes except CAT were decreased with increasing Cr(VI) concentration alone and mixed treatments. The presence of PVC MPs promoted Cr(VI) accumulation in sweet potato plants, which clearly showed severe toxic effects on their physio-biochemical characteristics, as indicated by a negative correlation between Cr(VI) concentration and these parameters. PVC MPs alone did not significantly inhibit these parameters. The findings of this study provide valuable implications for the proper management of PVC MPs and Cr(VI) in sweet potato plants.

Abundance, spatial distribution, and characteristics of microplastics in agricultural soils and their relationship with contributing factors.

Agro-ecosystem contamination with microplastics (MPs) is of great concern. However, limited research has been conducted on the agricultural soil of tropical regions. This paper investigated MPs in the agro-ecosystem of Hainan Island, China, as well as their relationships with plastic mulching, farming practices, and social and environmental factors. The concentration of MPs in the study area ranged from 2800 to 82500 particles/kg with a mean concentration of 15461.52 particles/kg. MPs with sizes between 20 and 200 µm had the highest abundance of 57.57%, fragment (58.16%) was the most predominant shape, while black (77.76%) was the most abundant MP colour. Polyethylene (PE) (71.04%) and polypropylene (PP) (19.83%) were the main types of polymers. The mean abundance of MPs was significantly positively correlated (p < 0.01) with all sizes, temperature, and shapes except fibre, while weakly positively correlated with the population (p = 0.21), GDP (p = 0.33), and annual precipitation (p = 0.66). In conclusion, plastic mulching contributed to significant contamination of soil MPs in the study area, while environmental and social factors promoted soil MPs fragmentation. The current study results indicate serious contamination with MPs, which poses a concern regarding ecological and environmental safety.

The chloroplast genome of Farsetia hamiltonii Royle, phylogenetic analysis, and comparative study with other members of Clade C of Brassicaceae.

BACKGROUND: Farsetia hamiltonii Royle is a medicinally important annual plant from the Cholistan desert that belongs to the tribe Anastaticeae and clade C of the Brassicaceae family. We provide the entire chloroplast sequence of F.hamiltonii, obtained using the Illumina HiSeq2500 and paired-end sequencing. We compared F. hamiltonii to nine other clade C species, including Farsetia occidentalis, Lobularia libyca, Notoceras bicorne, Parolinia ornata, Morettia canescens, Cochlearia borzaeana, Megacarpaea polyandra, Biscutella laevigata, and Iberis amara. We conducted phylogenetic research on the 22 Brassicaceae species, which included members from 17 tribes and six clades. RESULTS: The chloroplast genome sequence of F.hamiltonii of 154,802 bp sizes with 36.30% GC content and have a typical structure comprised of a Large Single Copy (LSC) of 83,906 bp, a Small Single Copy (SSC) of 17,988 bp, and two copies of Inverted Repeats (IRs) of 26,454 bp. The genomes of F. hamiltonii and F. occidentalis show shared amino acid frequencies and codon use, RNA editing sites, simple sequence repeats, and oligonucleotide repeats. The maximum likelihood tree revealed Farsetia as a monophyletic genus, closely linked to Morettia, with a bootstrap score of 100. The rate of transversion substitutions (Tv) was higher than the rate of transition substitutions (Ts), resulting in Ts/Tv less than one in all comparisons with F. hamiltonii, indicating that the species are closely related. The rate of synonymous substitutions (Ks) was greater than non-synonymous substitutions (Ka) in all comparisons with F. hamiltonii, with a Ka/Ks ratio smaller than one, indicating that genes underwent purifying selection. Low nucleotide diversity values range from 0.00085 to 0.08516, and IR regions comprise comparable genes on junctions with minimal change, supporting the conserved status of the selected chloroplast genomes of the clade C of the Brassicaceae family. We identified ten polymorphic regions, including rps8-rpl14, rps15-ycf1, ndhG-ndhI, psbK-psbI, ccsA-ndhD, rpl36-rps8, petA-psbJ, ndhF-rpl32, psaJ-rpl3, and ycf1 that might be exploited to construct genuine and inexpensive to solve taxonomic discrepancy and understand phylogenetic relationship amongst Brassicaceae species. CONCLUSION: The entire chloroplast sequencing of F. hamiltonii sheds light on the divergence of genic chloroplast sequences among members of the clade C. When other Farsetia species are sequenced in the future, the full F. hamiltonii chloroplast will be used as a source for comprehensive taxonomical investigations of the genus. The comparison of F. hamiltonii and other clade C species adds new information to the phylogenetic data and evolutionary processes of the clade. The results of this study will also provide further molecular uses of clade C chloroplasts for possible plant genetic modifications and will help recognise more Brassicaceae family species.

Evaluating the influence of financial investment in compulsory education on the health of Chinese adolescents: a novel approach.

BACKGROUND: With China's aging and declining fertility rate, the importance of population quality is increasing. As the main force of the labor market in the future, the Chinese government tries to promote the development of adolescents by increasing the financial investment in compulsory education, so as to improve the future population quality of China and enhance the national competitiveness. Therefore, the aim of this study was to investigate the relationship between financial investment in compulsory education and the health of Chinese adolescents. METHODS: This study specifically uses data obtained from China Education Panel Survey (CEPS). The data were nationally representative, which covered families, schools, and communities. For the CEPS data obtained, the 2013-2014 school year was the baseline, and two cohorts of 7th and 9th graders were the starting point of the survey. In the 2014-2015 school year, 8th-grade students who participated in the baseline survey (7th-grade students in the 2013-2014 school year) were followed up. Since the second period only began to investigate the data on financial investment in compulsory education, this article uses the data from the 2014-2015 academic year for research. OLS and Ordered Probit models were used to investigate the impact of financial investment in compulsory education on adolescent health. RESULTS: With the doubling of financial investment in compulsory education, self-rated health increased by 0.021, frequency of illness decreased by 0.03, the number of sick leave days decreased by 0.207, and depression decreased by 0.191. The heterogeneity analysis shows that compared to only-child, high-income and nonagricultural groups, the financial investment in compulsory education has a greater impact on the health of adolescents with the characteristics of agriculture hukou, non-only-child and low-income families. Further analysis of the impact mechanism shows that financial investment in compulsory education exerts a significant influence on the health of adolescents by easing family budget constraints, improving school sports facilities, and increasing the expected return of health investment and social capital. CONCLUSIONS: Financial investment in compulsory education can enhance the health of adolescents, and vulnerable groups benefit more, which is conducive to promoting health equity.