Freeze-thaw stability of high-internal-phase emulsion stabilized by chickpea protein microgel particles and its application in surimi.

BACKGROUND: Future applications of high-internal-phase emulsions (HIPEs) are highly regarded, but poor freeze-thaw stability limits their utilization in frozen products. This study aimed to characterize the structure of chickpea protein microgel particles (HCPI) induced by NaCl and to assess its impact on the freeze-thaw stability of HIPEs. RESULTS: The results showed that NaCl induction (0-400 mmol L-1) increased the surface hydrophobicity (175.9-278.9) and interfacial adsorbed protein content (84.9%-91.3%) of HCPI. HIPEs prepared with HCPI induced by high concentration of NaCl exhibited superior flocculation index and centrifugal stability, and their freeze-thaw stability was better than that of natural chickpea protein. The increase in NaCl concentration reduced the droplet aggregation and coalescence index of the freeze-thaw emulsions, diminishing the precipitation of oil from the emulsion. Linear and nonlinear rheology showed that the strengthened gel structure (higher G' values) restricted water flow and counteracted the damage to the interfacial film by ice crystals at 100-400 mmol L-1 NaCl, thus improving the viscoelasticity of the freeze-thaw emulsions. Finally, the thawing loss of surimi gel with HCPI-200 HIPE was reduced by 2.04% compared to directly adding oil. CONCLUSION: This study provided a promising strategy to improve the freeze-thaw stability of HIPEs and reduce the thawing loss of frozen products. © 2024 Society of Chemical Industry.

The effects of adding various starches on the structures of restructured potato-based dough and the oil uptake of potato chips.

BACKGROUND: The material composition significantly influences the oil absorption and quality characteristics of fried food products. The oil absorption of restructured potato chips is highly dependent on the structural properties of the restructured potato-based dough produced prior to frying. In this study, three types of starch were added to modify the structure of restructured potato-based dough, allowing the production of potato chips with less oil absorption. RESULTS: Distinct differences were observed among the three types of starch in terms of amylose content, chain length distribution, swelling power, solubility, crystalline structure and pasting properties. The addition of wheat starch, corn starch and tapioca starch changed the rheological properties, water distribution and strength of the restructured dough. Importantly, adding wheat starch and corn starch significantly lowered the oil content of potato chips by 7.94% and 13.06%, respectively. The reduction in oil absorption by potato chips was attributed to the increased strength of the starchy gel network of the dough, a slower rate of water evaporation and a limitation of dough expansion during frying. CONCLUSION: Adding wheat starch or corn starch to restructured potato-based dough resulted in a decrease in the oil absorption of potato chips by creating a stronger starchy gel network in the dough. This study could guide the development of suitable material compositions, which are important for producing fried food products with lower oil content. © 2024 Society of Chemical Industry.

Strategies for improving loading of emulsion-based functional oil powder.

Functional oil is type of oil that is beneficial to human health and has nutritional value, however, functional oils are rich in bioactive substances such as polyunsaturated fatty acids which are sensitive to environmental factors and are susceptible to oxidation or decomposition. Construction of emulsion-based oil powder is a promising approach for improving the stability and solubility of functional oils. However, the low effective loading of oil in powder is the main challenge limiting encapsulation technology. This manuscript focuses on reviewing the current research progress of emulsion-based functional oil powder construction and systematically summarizes the processing characteristics of emulsion-based oil powder with high payload and summarizing the strategies to enhance the payload of powder in term of emulsification and drying, respectively. The impact of emulsion formation on oil powder production is discussed from different characteristics of emulsions, including emulsion composition, emulsification methods and emulsion types. In addition, the current status of improving material loading performance by various modifications to the drying technology is discussed, including the addition of drying processing additives, changes in drying parameters and the effect of innovative technological means.

New insights into food O/W emulsion gels: Strategies of reinforcing mechanical properties and outlook of being applied to food 3D printing.

3D printing technology has been widely used in food processing with its advantages of customized food design, personalized nutrition design, and simplified food supply chain. Food emulsion gels have application value and prospects in food 3D printing due to their promising properties, including biodegradability, biocompatibility, as well as dual characteristics of emulsions and biopolymer gels. Food emulsion gels with appropriate mechanical properties, as a new type of food inks, expand the types and functions of the inks. However, food emulsion gels without adequate reinforced mechanical properties may suffer from defects in shape, texture, mouthfeel, and functionality during 3D printing and subsequent applications. Therefore, it is necessary to summarize the strategies to improve the mechanical properties of food emulsion gels. According to the methods of characterizing the mechanical properties of emulsion gels, this article summarizes four strategies for improving the mechanical properties of emulsion gels through two ways: inside-out (reinforcement of interface and reinforcement of cross-linking) and outside-in (physical approaches and environmental regulations), as well as their basic mechanisms. The application status and future research trends of emulsion gels in food 3D printing are finally discussed.

Research progress of water-in-oil emulsion gelated with internal aqueous phase: gel factors, gel mechanism, application fields, and future direction of development.

The W/O emulsion is a promising system. Its special structure can keep the sensory properties of fat while reducing the fat content. Improving the stability and physical properties of W/O emulsions is generally oriented toward outer oil-phase modified oil gels and inner water-phase modified inner hydrogels. In this paper, the research progress of internal aqueous gel was reviewed, and some gel factors suitable for internal aqueous gel and the gel mechanism of main gel factors were discussed. The advantages of this internal aqueous gel emulsion system allow its use in the field of fat substitutes and encapsulating substances. Finally, some shortcomings and possible research directions in the future were proposed, which would provide a theoretical basis for the further development of internal water-phase gelled W/O emulsion in the future.

Hydrothermal treatment improves xanthine oxidase inhibitory activity and affects the polyphenol profile of Flos Sophorae Immaturus.

BACKGROUND: Flos Sophorae Immaturus (FSI) is rich in polyphenols and a potential uric acid-lowering food. However, the processing of FSI is greatly restricted due to the heat sensitivity and low solubility of polyphenols. In this study, hydrothermal treatment - an effective strategy - was applied to FSI processing. The variation of xanthine oxidase (XO) inhibitory effect and polyphenol composition of FSI during hydrothermal treatment were recorded. RESULTS: The XO inhibition rate of FSI increased from 32.42% to 89.00% after hydrothermal treatment at 220 °C for 30 min, as well as total polyphenols (from 0.66 to 1.11 mg mL-1 ) and flavonoids (from 1.21 to 1.58 mg mL-1 ). However, high thermal temperature (>160 °C) and extended thermal time (>90 min) caused the degradation of polyphenols. Rutin, kaempferol-3-O-rutinoside and narcissoside rapidly degraded and converted to quercetin, kaempferol and isorhamnetin when the temperature exceeded 160 °C. The maximum yields of quercetin, kaempferol and isorhamnetin were at 220 °C for 30 min, 90 min and 90 min, respectively. Meanwhile, the conversion kinetics conformed to the first-order model. Interestingly, these newly formed polyphenols possessed better XO inhibitory effects than their derivatives with 3-O-rutinoside. CONCLUSION: Polyphenol conversion during hydrothermal treatment was the main reason for enhancing XO inhibitory activity. Therefore, hydrothermal treatment is an appropriate method for improving the XO inhibitory effect of FSI. © 2022 Society of Chemical Industry.

The road ahead of dietary restriction on anti-aging: focusing on personalized nutrition.

Dietary restriction (DR), including caloric restriction (CR), intermittent fasting (IF), and restriction of specific food compositions, can delay aging, and the main mechanisms include regulation of nutrient-sensing pathways and gut microbiota. However, the effects of DR regimens on longevity remain controversial, as some studies have demonstrated that IF, rather than CR or diet composition, influences longevity, while other studies have shown that the restricted-carbohydrate or -protein diets, rather than CR, determine health and longevity. Many factors, including DR-related factors (carbohydrate or protein composition, degree and duration of DR), and individual differences (health status, sex, genotype, and age of starting DR), would be used to explain the controversial anti-aging effects of DR, thus highlighting the necessity of precise DR intervention for anti-aging. Personalized DR intervention in humans is challenging because of the lack of accurate aging molecular biomarkers and vast individual variability. Using machine learning to build a predictive model based on the data set of clinical features, gut microbiome and metabolome, may be a good method to achieve precise DR intervention. Therefore, this review analyzed the anti-aging effects of various DR regimens, summarized their mechanisms and influencing factors, and proposed a future research direction for achieving personalized DR regimens for slowing aging.

Antibiotic-induced gut dysbiosis and barrier disruption and the potential protective strategies.

The oral antibiotic therapies administered widely to people and animals can cause gut dysbiosis and barrier disruption inevitably. Increasing attention has been directed toward antibiotic-induced gut dysbiosis, which involves a loss of diversity, changes in the abundances of certain taxa and consequent effects on their metabolic capacity, and the spread of antibiotic-resistant bacterial strains. Treatment with beta-lactam, glycopeptide, and macrolide antibiotics is associated with the depletion of beneficial commensal bacteria in the genera Bifidobacterium and Lactobacillus. The gut microbiota is a reservoir for antibiotic resistance genes, the prevalence of which increases sharply after antibiotic ingestion. The intestinal barrier, which comprises secretory, physical, and immunological barriers, is also a target of antibiotics. Antibiotic induced changes in the gut microbiota composition could induce weakening of the gut barrier through changes in mucin, cytokine, and antimicrobial peptide production by intestinal epithelial cells. Reports have indicated that dietary interventions involving prebiotics, probiotics, omega-3 fatty acids, and butyrate supplementation, as well as fecal microbiota transplantation, can alleviate antibiotic-induced gut dysbiosis and barrier injuries. This review summarizes the characteristics of antibiotic-associated gut dysbiosis and barrier disruption, as well as the strategies for alleviating this condition. This information is intended to provide a foundation for the exploration of safer, more efficient, and affordable strategies to prevent or relieve antibiotic-induced gut injuries.

Effects of different drying methods on the storage stability of barley grass powder.

BACKGROUND: Barley grass (BG) powder has gradually attracted researchers' attention for its abundant nutritional components and functional activity. Yet, the effect of different drying methods on storage stability is still unclear. In this study, BG was subjected to hot-air drying (HAD), steam blanching prior to hot-air drying (SHAD), vacuum freeze drying (VFD), and far-infrared drying (FID). Effects of different drying methods on BG powder during storage were evaluated. RESULTS: Moisture content of dried samples during storage decreased at 50 °C, but at 37 °C increased first and then remained stable. The a* value of SHAD BG powder before storage was the highest (-6.51), followed by FID, HAD and VFD. Moreover, the a* value increased during the storage process. Contents of l-ascorbic acid and total chlorophyll in samples dried by VFD were 28.29 and 7.8 g kg-1 , respectively. The degradation of chlorophyll a and b followed a first-order kinetics model and was modeled by the Arrhenius equation. The activation energies for chlorophyll a were 83.68, 83.21, 62.29 and 76.64 kJ mol-1 in BG powder dried by SHAD, FID, VFD and HAD, respectively. The activation energies for chlorophyll b were 66.76, 48.03, 61.02 and 58.01 kJ mol-1 in SHAD, FID, VFD and HAD BG powder, respectively. CONCLUSION: VFD had the highest preservation of color, l-ascorbic acid and chlorophyll compared to HAD, SHAD and FID. SHAD shortened the drying time and delayed the degradation of l-ascorbic acid and chlorophyll during storage. © 2021 Society of Chemical Industry.

Digestible indispensable amino acid scores of nine cooked cereal grains.

True ileal digestibility (TID) values of amino acid (AA) obtained using growing rats are often used for the characterisation of protein quality in different foods and acquisition of digestible indispensable amino acid scores (DIAAS) in adult humans. Here, we conducted an experiment to determine the TID values of AA obtained from nine cooked cereal grains (brown rice, polished rice, buckwheat, oats, proso millet, foxtail millet, tartary buckwheat, adlay and whole wheat) fed to growing Sprague-Dawley male rats. All rats were fed a standard basal diet for 7 d and then received each diet for 7 d. Ileal contents were collected from the terminal 20 cm of ileum. Among the TID values obtained, whole wheat had the highest values (P<0·05), and polished rice, proso millet and tartary buckwheat had relatively low values. The TID indispensable AA concentrations in whole wheat were greater than those of brown rice or polished rice (P<0·05), and polished rice was the lowest total TID concentrations among the other cereal grains. The DIAAS was 68 for buckwheat, 47 for tartary buckwheat, 43 for oats, 42 for brown rice, 37 for polished rice, 20 for whole wheat, 13 for adlay, 10 for foxtail millet and 7 for proso millet. In this study, the TID values of the nine cooked cereal grains commonly consumed in China were used for the creation of a DIAAS database and thus gained public health outcomes.

Supercritical CO2 Fluid Extraction of Elaeagnus mollis Diels Seed Oil and Its Antioxidant Ability.

Supercritical fluid carbon dioxide (SF-CO2) was used to extract oil from Elaeagnus mollis Diels (E. mollis Diels) seed and its antioxidant ability was also investigated. The effect of extraction pressure (20⁻35 MPa), extraction temperature (35⁻65 C), extraction time (90⁻180 min) and seed particle size (40⁻100 mesh) on the oil yield were studied. An orthogonal experiment was conducted to determine the best operating conditions for the maximum extraction oil yield. Based on the optimum conditions, the maximum yield reached 29.35% at 30 MPa, 50 C, 150 min, 80 mesh seed particle size and 40 g/min SF-CO2 flow rate. The E. mollis Diels seed (EDS) oil obtained under optimal SF-CO2 extraction conditions had higher unsaturated fatty acid content (91.89%), higher vitamin E content (96.24 ± 3.01 mg/100 g) and higher total phytosterols content (364.34 ± 4.86 mg/100 g) than that extracted by Soxhlet extraction (SE) and cold pressing (CP) methods. The antioxidant activity of the EDS oil was measured by DPPH and hydroxyl radical scavenging test. EDS oil extracted by different methods exhibited a dose-dependent antioxidant ability, with IC50 values of no significant differences. Based on the results of correlation between bioactive compounds, lupeol and -tocopherol was the most important antioxidant in EDS oil.

Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries.

This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO) and penetrated surface oil (PSO) of French fries and have no negative effects on its texture and also effectively control the final moisture content (p < 0.05). Compared with control or samples coated with guar gum (blanching with or without calcium ions), the total oil (TO) of French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries.

Effect of starch granule size on the properties of dough and the oil absorption of fried potato crisps.

Starch is a key element in fried potato crisps, however, the effect of starch granule size on oil absorption of the product have yet to be fully investigated. The study explored the impact of starch granule size on both the dough characteristics and oil absorption in potato crisps. The dough composed of small-sized potato granules showed more compact and uniform network system. Additionally, X-ray Microscope analysis showed that potato crisps prepared with small-sized potato granules had limited matrix expansion and fewer pores, cracks, and voids. The small-sized potato and small-sized wheat starches granule addition crisps displayed a significantly greater average cell thickness (52.05 and 53.44 µm) than other samples, while exhibiting notably lower average porosity (61.37 % and 60.28 %) compared to other samples. Results revealed that potato crisps with medium and small potato granules had 12.91 % and 21.92 % lower oil content than those containing large potato starch. Potato crisps with B-type wheat starch showed 16.36 % less oil absorption than those with A-type wheat starch. Small-sized starches significantly influence the dough structure and contribute to the reduction of oil absorption in fried products. The generated insights may provide monitoring indexes for cultivating potato varieties with low oil absorption.

Tannic acid-enriched nanocellulose hydrogels improve physical and oxidative stability of high-internal-phase Pickering emulsions.

A cellulose suspension and tannic acid (TA) were co-sonicated to prepare TA-incorporated nanocellulose hydrogels with the aim of improving the physical and oxidative stability of high-internal-phase emulsions (HIPEs). Cellulose nanocrystal (CNC) hydrogels were used to stabilize HIPEs, relying on the interfacial adsorption behavior of CNCs and the reversible gelation properties of hydrogels. TA was incorporated due to its ability to improve emulsification performance and antioxidant properties. Introducing TA enhanced the gel strength of hydrogels by decreasing the interfibrillar distance. The utilization of CNC-TA hydrogels effectively improved physical properties of HIPEs. This improvement included a reduction in droplet size from the initial 103.41 µm to 39.66 µm, an enhancement of the gel structure, and an improvement in storage stability. A denser and orderly interfacial structure was formed in CNCs-TA hydrogel stabilized HIPEs due to anchoring TA at the interface driven by the hydrogen-bonding interaction between CNCs and TA. This densely interfacial layer with good antioxidant activity markedly enhanced the oxidative stability of emulsions, as evidenced by the low level of oxidation products in HIPEs. This study has the potential to extend the utilization of CNC-stabilized emulsions to new applications in the food, cosmetic, and pharmaceutical industries.

Stabilization of all-natural water-in-oil high internal phase pickering emulsion by using diosgenin/soybean phosphatidylethanolamine complex: Characterization and application in 3D printing.

This study aimed to prepare an all-natural water-in-oil high internal phase Pickering emulsion (W/O-HIPPE) using diosgenin/soybean phosphatidylethanolamine complex (DGSP) and investigate the 3D printing performance. Results suggested that the self-assembly of diosgenin crystal was modified by SP in DGSP (diosgenin-SP ratios at 3:1 and 1:1), revealing a variation from large-size outward radiating needle-like to small-size granular-like shape, which facilitated closely packing at the interface. Hydrophilicity of DGSP was also increased (contact angle varying from 133.3 o to 106.4 o), ensuring more adequate interfacial adsorption to reduce interfacial tension more largely (6.5 mN/m). Thus, the W/O-HIPPE made by DGSP with diosgenin-SP = 1:1, exhibited smaller droplets and better freeze/thawing stability. The W/O-HIPPE was also measured improved rheological properties for 3D printing: satisfied shear-thinning behavior, higher recovery and self-supporting (viscoelasticity and deformation resistance). Consequently, the W/O-HIPPE allowed for printing more delicate patterns. This work provided guidance to prepare W/O-HIPPE for 3D printing.

Development of interpenetrating network hydrogels: Enhancing the release and bioaccessibility of green tea polyphenols.

Green Tea polyphenols (GTP) are important bioactive compounds with excellent physiological regulation functions. However, they are easily destroyed by the gastric environment during digestion. In this work, a sodium alginate (SA)-gellan gum (GG) interpenetrating network (IPN) hydrogel was synthesized to protect and delivery GTP. The ratio of SA/GG significantly affects the network structure of IPN hydrogels and the performance of delivering GTP. The hydrogel formed by interpenetrating 20 % GG with 80 % SA as the main network had the highest water uptake (55 g/g), holding capacity (950 mg/g), and freeze-thaw stability, with springiness reaching 0.933 and hardness reaching 1300 g, which due to the filling effect and non-covalent interaction. Rheological tests showed that the crosslink density of IPN hydrogel in SA-dominated network was improved by the addition of GG to make it better bound to GTP, and the higher water uptake meant that the system could absorb more GTP-containing solution. This IPN hydrogel maintained 917.3 mg/g encapsulation efficiency at the highest loading capacity (1080 mg/g) in tests as delivery system. In in vitro digestion simulations, owing to the pH responsiveness, the IPN hydrogel reduced the loss of GTP in gastric fluid, achieving a bioaccessibility of 71.6 % in the intestinal tract.

Interfacial adsorption of soybean phosphatidylethanolamine in different oil phase and the stability of water-in-oil emulsion.

Water-in-oil (W/O) emulsion holds great potential in designing fat-reduced foods. However, due to the lack of W/O-type surfactant, formation of all-natural W/O emulsion is challenged. This study aimed to investigate the effect of oil phase on interfacial adsorption of soybean phosphatidylethanolamine (SP) and stability of W/O emulsion. Five oils, including medium chain triglycerides oil (MO), coconut oil (CO), palm kernel oil (PKO), sunflower oil (SO) and rapeseed oil (RO), were selected. Results showed that diffusion rate of SP to the interface ranked as MO > CO > PKO > SO ≈ RO, increasing interfacial adsorption from 50.2 % to 85.3 %. Higher interfacial adsorption improved the deformation resistance of interfacial layer, causing more significant decrease in interfacial tension (3.54 mN/m). So, the largest water fraction (65 %) was stabilized by SP with MO and CO, and exhibited smaller droplet sizes and better stability. Consequently, shorter-chain oil was more suitable for preparing W/O emulsions.

Intelligence detection of oil absorption in French fries by surface profiles.

Surface profiles are important evaluation indices for oil absorption behavior of fried foods. This research established two intelligent models of partial least-squares regression (PLSR) and back propagation artificial neural network (BP-ANN) for monitoring the oil absorption behavior of French fries based on the surface characteristics. Surface morphology and texture of French fries by rapeseed oil (RO) and high-oleic peanut oil (HOPO) at different temperatures were investigated. Results showed that oil content of samples increased with frying temperature, accounting for 37.7% and 41.4% of samples fried by RO and HOPO respectively. The increase of crust ratio, roughness and texture parameters (Fm, Nwr, fwr, Wc) and the decrease of uniformity were observed with the frying temperature. Coefficients of prediction set of PLSR and BP-ANN models were more than 0.93, which indicated that surface features combined with chemometrics were rapid and precise methods for determining the oil content of French fries.

Synergistic anti-aging effect of Dendrobium officinale polysaccharide and spermidine: A metabolomics analysis focusing on the regulation of lipid, nucleotide and energy metabolism.

The importance of synergy has been underscored in recent medical research for augmenting the efficacy of therapeutic interventions, targeting multiple biological pathways simultaneously. Our prior research elucidated that Dendrobium officinale polysaccharide (DOP) has the potential to prolong the lifespan of Caenorhabditis elegans (C. elegans) via regulating gut microbiota. Concurrently, spermidine (Spd), as a mimicking caloric restriction, facilitates autophagy and exerts a pronounced anti-aging effect. To enhance the anti-aging capabilities of DOP, we conducted a comprehensive study examining the combined effects of DOP and Spd in C. elegans, incorporating metabolomics analysis to investigate the underlying mechanisms. A combination of 250 mg/L DOP and 29.0 mg/L Spd yielded the most favorable outcomes in lifespan extension, evidencing a synergistic effect with a combination index (CI) of 0.65. In oxidative and heat stress tolerance assays, the observed CIs were 0.50 and 0.33, respectively. Metabolomic analysis highlighted significant alterations in metabolites related to lipid, nucleotide and energy metabolism, notably regulating glycerol 3-phosphate, linoleoyl glycerol, docosapentaenoic acid and ß-nicotinamide mononucleotide, nicotinamide adenine dinucleotide. The effects of DS on lipid metabolism were further validated using Oil Red O staining and triglyceride level in C. elegans. The results indicated that DS may primarily be via modulating lipid metabolism. To further confirm these findings, a high-fat diet-induced mouse model was employed. Consequently, it can be inferred that the synergistic anti-aging impact of DOP and Spd is likely mediated primarily through alterations in lipid metabolic processes.

Unraveling the complex nexus: Interplay of volatile compounds, free amino acids, and metabolites in oat solid state fermentation.

This study delves into the dynamic interplay of volatile compounds, free amino acids, and metabolites, meticulously exploring their transformations during oat fermentation. Analysis via gas chromatography-mass spectrometry (GC-MS) unveiled significant alterations: 72 volatile compounds in unfermented oats (NFO) and 60 in fermented oats (FO), reflecting the profound impact of Saccharomyces cerevisiae TU11 and Lactobacillus plantarum Heal19 on oat constituents. A marked increase in Heptane (5.7-fold) and specific alcohol compounds, like 2-methyl-1-propanol, 3-methyl-1-butanol, and Phenylethyl alcohol in FO samples, while reductions in Hexanal, Hexanoic acid, and Acetic acid were observed. Notably, 4 phenolic compounds emerged post-fermentation, revealing diverse microbial actions in flavor modulation. Orthogonal-partial least squares discriminant analysis (OPLS-DA) indicated a clear separation between NFO and FO, demonstrating distinct volatile compound profiles. Further analysis revealed a noteworthy decrease in all free amino acids except for a significant increase in serine during fermentation. Differential metabolite screening identified 354 metabolites with 219 upregulated and 135 down-regulated, uncovering critical markers like isophenoxazine and imidazole lactic acid. Correlation analyses unveiled intricate relationships between volatile compounds and diverse metabolites, illuminating underlying biochemical mechanisms shaping oat flavor profiles during fermentation.