Establishment of an in vitro model of monocyte-like THP-1 cells for trained immunity induced by bacillus Calmette-Guérin.

BACKGROUND: Mycobacteria bloodstream infections are common in immunocompromised people and usually have disastrous consequences. As the primary phagocytes in the bloodstream, monocytes and neutrophils play critical roles in the fight against bloodstream mycobacteria infections. In contrast to macrophages, the responses of monocytes infected with the mycobacteria have been less investigated. RESULTS: In this study, we first established a protocol for infection of non-adherent monocyte-like THP-1 cells (i.e. without the differentiation induced by phorbol 12-myristate 13-acetate (PMA) by bacillus Calmette-Guérin (BCG). Via the protocol, we were then capable of exploring the global transcriptomic profiles of non-adherent THP-1 cells infected with BCG, and found that NF-κB, MAPK and PI3K-Akt signaling pathways were enhanced, as well as some inflammatory chemokine/cytokine genes (e.g. CCL4, CXCL10, TNF and IL-1ß) were up-regulated. Surprisingly, the Akt-HIF-mTOR signaling pathway was also activated, which induces trained immunity. In this in vitro infection model, increased cytokine responses to lipopolysaccharides (LPS) restimulation, higher cell viability, and decreased Candida albicans loads were observed. CONCLUSIONS: We have first characterized the transcriptomic profiles of BCG-infected non-adherent THP-1 cells, and first developed a trained immunity in vitro model of the cells.

Bi-MOF Modulating MnO2 Deposition Enables Ultra-Stable Cathode-Free Aqueous Zinc-Ion Batteries.

The Mn-based materials are considered as the most promising cathodes for zinc-ion batteries (ZIBs) due to their inherent advantages of safety, sustainability and high energy density, however suffer from poor cyclability caused by gradual Mn2+ dissolution and irreversible structural transformation. The mainstream solution is pre-adding Mn2+ into the electrolyte, nevertheless faces the challenge of irreversible Mn2+ consumption results from the MnO2 electrodeposition reaction (Mn2+  â†’ MnO2 ). This work proposes a "MOFs as the electrodeposition surface" strategy, rather than blocking it. The bismuth (III) pyridine-3,5-dicarboxylate (Bi-PYDC) is selected as the typical electrodeposition surface to regulate the deposition reaction from Mn2+ to MnO2 . Because of the unique less hydrophilic and manganophilic nature of Bi-PYDC for Mn2+ , a moderate MnO2 deposition rate is achieved, preventing the electrolyte from rapidly exhausting Mn2+ . Simultaneously, the intrinsic stability of deposited R-MnO2 is enhanced by the slowly released Bi3+ from Bi-PYDC reservoir. Furthermore, Bi-PYDC shows the ability to accommodate H+ insertion/extraction. Benefiting from these merits, the cathode-free ZIB using Bi-PYDC as the electrodeposition surface for MnO2 shows an outstanding cycle lifespan of more than 10 000 cycles at 1 mA cm-2 . This electrode design may stimulate a new pathway for developing cathode free long-life rechargeable ZIBs.

3D Co-Doping α-Ni(OH)2 Nanosheets for Ultrastable, High-Rate Ni-Zn Battery.

The α-Ni(OH)2 is regarded as one promising cathode for aqueous nickel-zinc batteries due to its high theoretical capacity of ≈480 mAh g-1 , its practical deployment however suffers from the poor stability in strong alkaline solution, intrinsic low electrical conductivity as well as the retarded ionic diffusion. Herein, a 3D (three dimensional) macroporous α-Ni(OH)2 nanosheets with Co doping is designed through a facile and easily scalable electroless plating combined with electrodeposition strategy. The unique micrometer-sized 3D pores come from Ni substrate and rich voids between Co-doping α-Ni(OH)2 nanosheets can synergistically afford facile, interconnected ionic diffusion channels, sufficient free space for accommodating its volume changes during cycling; meanwhile, the Co-doping can stabilize the structural robustness of the α-Ni(OH)2 in the alkaline electrolyte during cycling. Thus, the 3D α-Ni(OH)2 shows a high capacity of 284 mAh g-1 at 0.5 mA cm-2 with an excellent retention of 78% even at 15 mA cm-2 , and more than 2000 stable cycles at 6 mA cm-2 , as well as the robust cycling upon various flexible batteries. This work provides a simple and efficient pathway to enhance the electrochemical performance of Ni-Zn batteries through improving ionic transport kinetics and stabilizing crystal structure of cathodes.

Miniaturized fiber Bragg grating accelerator sensors for low-frequency vibration monitoring.

Acceleration monitoring is an important technical means of seismic monitoring, oil exploration, deep well observation, etc. A miniaturized fiber Bragg grating (FBG) acceleration sensor with three cantilever beams is proposed against the fact that it is difficult for fiber-optic sensors to meet the requirements for low-frequency vibration monitoring. First, the model of the FBG acceleration sensor was built and theoretically analyzed; second, the effect of structural parameters on sensor sensitivity and natural frequency was analyzed, and the sensors were subjected to static stress analysis and modal simulation analysis through the ANSYS finite element analysis software; finally, the real sensors were developed and subjected to performance tests with a low-frequency vibration test system. According to the result, the natural frequency of the sensor is about 64 Hz, and its sensitivity is 201.3 pm/g; favorable linearity is observed at the working frequency band of 0.1-40 Hz, and the transverse interference is less than 2.51%. The research findings offer a reference for the development of like sensors and the further exploration of the lower limit of low frequency.

Electron-Rich Triazine-Conjugated Microporous Polymers for the Removal of Dyes from Wastewater.

Conjugated microporous polymers (CMP) as porous functional materials have received considerable attention due to their unique structures and fascinating properties for the adsorption and degradation of dyes. Herein, a triazine-conjugated microporous polymer material with rich N-donors at the skeleton itself was successfully synthesized via the Sonogashira-Hagihara coupling by a one-pot reaction. These two polymers had Brunauer-Emmett-Teller (BET) surface areas of 322 and 435 m2g-1 for triazine-conjugated microporous polymers (T-CMP) and T-CMP-Me, respectively. Due to the porous effects and the rich N-donor at the framework, it displayed a higher removal efficiency and adsorption performance compared to cationic-type dyes and selectivity properties for (methylene blue) MB+ from a mixture solution of cationic-type dyes. Furthermore, the T-CMP-Me could quickly and drastically separate MB+ and (methyl orange) MO- from the mixed solution within a short time. Their intriguing absorption behaviors are supported by 13C NMR, UV-vis absorption spectroscopy, scanning electron microscopy, and X-ray powder diffraction studies. This work will not only improve the development of porous material varieties, but also demonstrate the adsorption or selectivity of porous materials for dyes from wastewater.

Controllable 3D Porous Ni Current Collector Coupled with Surface Phosphorization Enhances Na Storage of Ni3 S2 Nanosheet Arrays.

3D porous Ni is fabricated via an easily scalable electroless plating method using a dynamic template formed through in-situ hydrogen bubbles. The pore size in the range of several micrometers is controllable through adjusting the Ni2+ depositing rate and hydrogen bubbles releasing rate. The Ni3 S2 nanosheet arrays anode is then grown on the unique 3D porous Ni current collector followed by subsequent surface phosphorization. The tremendous interconnected pores and rich voids between the Ni3 S2 nanosheet arrays cannot only provide rapid transferring channels for Na+ , but also accommodate volumetric changes of the Ni3 S2 electrode during cycling, guaranteeing the integrity of the active material. In addition, the surface phosphorized layer enhances the electronic conductivity through providing an electron transport highway along the 3D Ni3 S2 , NiP2 layer, and 3D porous Ni current collector, and simultaneously stabilizes the electrode/electrolyte interphase as a protecting layer. Because of these merits, the phosphorized 3D porous Ni3 S2 (3D P-Ni3 S2 ) electrode is capable of delivering an ultra-stable capacity of 387.5 mAh g-1 at 0.1 A g-1 , and a high capacity retention of 85.3% even at a high current density of 1.6 A g-1 .

Cross spring leaf-based high-sensitivity low-frequency dual-FBG acceleration sensor.

The measurement of low-frequency vibration signals is of great significance in seismic monitoring, health monitoring of large and medium-sized engineering structures, and resource exploration. In view of the low sensitivity of fiber Bragg grating (FBG) acceleration sensors in measuring low-frequency vibration signals, a high-sensitivity, low-frequency dual-FBG acceleration sensor is proposed. Theoretical formula derivation and ANSYS software were used to optimize the design and simulation analysis of the structural parameters of the sensor. The real sensor was made based on the simulation results, and a test system was established to test its performance. According to the findings, the natural frequency of the acceleration sensor is 65 Hz. It gives a flat sensitivity response in the low frequency band of 3-45 Hz. The dynamic range is 92.63 dB at 10 Hz, the acceleration sensitivity is 1498.29 pm/g, and the linearity R2 is 0.9998. The relative standard deviation of the sensor repeatability is 1.75%, and the transverse crosstalk in the working frequency band is -33.99dB. Designed with a high sensitivity and excellent temperature compensation capacity in the low-frequency band, the designed sensor is suitable for low- and medium-frequency vibration detection in engineering.

A Rare Case of Craniocervical Penetrating Injury by a Steel Bar.

RATIONALE: Non-missile penetrating injuries caused by foreign bodies, such as knives or sharp wood, are infrequent. We report a 49-year-old male suffering from severe craniocervical penetrating injury by a steel bar was successfully treated by surgery. CHIEF COMPLAINT: The male patient was a 49-year-old builder. Although working on the construction site, an approximately 60 cm steel bar penetrated the patient's brain vertically through the left top of the head presenting with unconsciousness and intermittent irritability. DIAGNOSIS: Computed tomography of the head showed the entrance and exit of the skull damaged by the steel bar. Three-dimensional reconstruction showed that the steel bar entered the skull from the posterior left coronal suture and penetrated the ipsilateral occipital bone, about 5 cm into the neck soft tissue. INTERVENTION: We successfully performed the operation and removed the steel bar. OUTCOMES: The patient was followed up for 5 years; muscle strength returned to normal. LESSONS: Penetrating injuries caused by steel bars are rare, which always cause severe intracranial injury combined with peripheral tissue injury, by sharing our experience in the treatment of this rare case, we hope to provide a reference for similar injuries in the future.

Curcumin alleviates inflammation in Takayasu's arteritis by blocking CCL2 overexpression in adventitial fibroblasts.

OBJECTIVES: Takayasu's arteritis (TAK) is a chronic inflammatory disease with several challenges in treatment. Curcumin is known for its anti-inflammatory effects, whereas its effect in the treatment of TAK remains unclear. In this study, we aimed to investigate the effect of curcumin in the treatment of TAK and its underlying mechanisms. METHODS: 16 TAK patients were treated with curcumin granules at a dose of 15 g/day for three months. Kerr score was explored to assess disease activity. Serum levels of inflammatory factors were measured by ELISA. Immunohistochemical and immunofluorescence staining were used to detect the expression of CCL2 (also known as MCP-1) in aortic adventitia. RT-qPCR, ELISA and western blot were used to determine the regulatory effect of curcumin on CCL2 expression in aortic adventitia fibroblasts (AAFs) and its mechanism. RESULTS: Curcumin treatment significantly lowered Kerr score and the levels of serum CCL2 in TAK patients. The expression of CCL2 in TAK aortic adventitia was increased and colocalised with CD68. Serum levels of CCL2 was increased in subjects with Kerr score ≥2. After curcumin treatment, the changes in CCL2 were positively associated with the changes in IL-6. In further analysis, it showed that CCL2 was co-localised with CD90 and α-SMA, markers of adventitia fibroblasts. In vitro, HSP65, an agonist of TLR4, could induce CCL2 expression in AAFs via phosphorylating and activating the JAK2/AKT/STAT3 pathway. Nevertheless, curcumin could reverse the HSP65-induced CCL2 upregulation through restraining JAK2/AKT/STAT3 pathway. The inhibitory effect of curcumin on the JAK2/AKT/STAT3 pathway was even more obvious than that of methotrexate and tofacitinib. CONCLUSIONS: Curcumin alleviated inflammation in TAK by downregulating CCL2 overexpression in AAFs through inhibiting the JAK2/AKT/STAT3 signalling pathway.

Compound Cocktail Inhibits Influenza Viral Pneumonia via Phospholipase Cγ1 Phosphorylation-Related Necroptosis and Partial Autophagy in Natural Killer Cells.

Influenza viral infections are prone to global outbreaks and cause pneumonia in affected populations. High morbidity and mortality caused by pneumonia occur during an influenza pandemic. Antivirals or control of inflammation is the primary means of influenza treatment. A compound cocktail composed of arctiin, daidzein, glycyrrhizic acid, and liquiritin inhibited mouse pneumonia resulting from a PR8 viral infection and caused a weight gain after oral administration. Natural killer cell activating receptors, both Ly49D and Ly49H in the lungs, were increased in the treatment in mice. In H3N2 virus-infected natural killer-92MI cells, the cocktail treatment had different effects on phosphorylation sites of phospholipase Cγ1 (PLCγ1) and killed infected cells through necroptosis or late apoptosis, in which RIP3 was increased and both caspase-3 and phosphorylated-JNK in the cells were downregulated. Acid phosphatase activity in viral-infected natural killer-92MI cells was induced by the compound cocktail treatment, which could be related to the p62 decrease in natural killer-92MI cells. In addition, an autophagic flux induction was observed in alveolar basal epithelial cells (A549). Protein p65, but not phosphorylated-p65, was significantly decreased by the treatment. Our results indicate that the compound cocktail strengthened the phosphorylation of PLCγ1-related necroptosis and partial autophagy in natural killer cells, which could yield an inhibitory effect on viral pneumonia in influenza.

Oxidation of dCTP contributes to antibiotic lethality in stationary-phase mycobacteria.

Growing evidence shows that generation of reactive oxygen species (ROS) derived from antibiotic-induced metabolic perturbation contribute to antibiotic lethality. However, our knowledge of the mechanisms by which antibiotic-induced oxidative stress actually kills cells remains elusive. Here, we show that oxidation of dCTP underlies ROS-mediated antibiotic lethality via induction of DNA double-strand breaks (DSBs). Deletion of mazG-encoded 5-OH-dCTP-specific pyrophosphohydrolase potentiates antibiotic killing of stationary-phase mycobacteria, but did not affect antibiotic efficacy in exponentially growing cultures. Critically, the effect of mazG deletion on potentiating antibiotic killing is associated with antibiotic-induced ROS and accumulation of 5-OH-dCTP. Independent lines of evidence presented here indicate that the increased level of DSBs observed in the ΔmazG mutant is a dead-end event accounting for enhanced antibiotic killing. Moreover, we provided genetic evidence that 5-OH-dCTP is incorporated into genomic DNA via error-prone DNA polymerase DnaE2 and repair of 5-OH-dC lesions via the endonuclease Nth leads to the generation of lethal DSBs. This work provides a mechanistic view of ROS-mediated antibiotic lethality in stationary phase and may have broad implications not only with respect to antibiotic lethality but also to the mechanism of stress-induced mutagenesis in bacteria.

Porous FeO x /carbon nanocomposites with different iron oxidation degree for building high-performance lithium ion batteries.

Transition metal oxides have attracted lots of interest for lithium ion battery (LIB) due to the high theoretical capacity, however, the large specific volume change, low electrical conductivity and slow intrinsic lithiation/delithiation still limit the practical applications. In order to overcome the challenge, a novel type of high temperature annealing treatment for the synthesis of 3D porous FeO x nanocrystals embedded in a partially carbon matrix as an example for high-performance LIB is reported. The FeO x /carbon nanocomposites with coral-like architecture achieved at 700 °C (F700) exhibit good long term cyclability with a reversible capacity 1012 mAh g-1 remain after 500 cycles at 1.0 A g-1 and the high rate capacity with a reversible capacity of 233 mAh g-1 even at extremely high current density of 20 A g-1. These excellent electrochemical performances could be attributed to the 3D porous structure and carbon coating, which could not only provide excellent electronic conductivity and enough elastic buffer space to accommodate volume changes upon lithium insertion/extraction, but also effectively avoid agglomeration of the Fe3O4 nanocrystals and maintain the structural integrity of the electrode during the charge/discharge process.

The Role of KLRG1 in Human CD4+ T-Cell Immunity Against Tuberculosis.

Background: KLRG1 is a marker of terminally differentiated CD8+ T cells in viral infection, but its role in human Mycobacterium tuberculosis infection remains elusive. Methods: A set of cohorts of patients with tuberculosis was designed, and the expression profiles and functions of KLRG1+CD4+ T cells were determined with and without antibody blocking. Results: KLRG1 expression on CD4+ T cells was significantly increased in patients with active tuberculosis, compared with healthy controls and patients without tuberculosis. Upon M. tuberculosis-specific stimulation, the ability to secrete interferon γ, interleukin 2, and tumor necrosis factor α was significantly greater in KLRG1-expressing CD4+ T cells than in their KLRG-negative counterparts and was accompanied by a decreased proportion of regulatory T cells and increased Akt signaling. However, KLRG1-expressing CD4+ T cells had a shorter life-span, which was associated with a higher apoptosis rate but a similar proliferative response. Blockade of KLRG1 signaling significantly enhanced interferon γ and interleukin 2 secretion without affecting either cell apoptosis or multiplication. Addition of a specific Akt inhibitor prevented this increased cytokine response, implicating the Akt signaling pathway. Conclusions: Our study delineated the profile of KLRG1+CD4+ T cells in patients with tuberculosis and suggests that M. tuberculosis infection drives CD4+ T cells to acquire increased effector function in a terminally differentiated state, which is restrained by KLRG1 via KLRG1/Akt signaling pathway.

Sendai Virus Mucosal Vaccination Establishes Lung-Resident Memory CD8 T Cell Immunity and Boosts BCG-Primed Protection against TB in Mice.

Accumulating evidence has shown the protective role of CD8+ T cells in vaccine-induced immunity against Mycobacterium tuberculosis (Mtb) despite controversy over their role in natural immunity. However, the current vaccine BCG is unable to induce sufficient CD8+ T cell responses, especially in the lung. Sendai virus, a respiratory RNA virus, is here engineered firstly as a novel recombinant anti-TB vaccine (SeV85AB) that encodes Mtb immuno-dominant antigens, Ag85A and Ag85B. A single mucosal vaccination elicited potent antigen-specific T cell responses and a degree of protection against Mtb challenge similar to the effect of BCG in mice. Depletion of CD8+ T cells abrogated the protective immunity afforded by SeV85AB vaccination. Interestingly, only SeV85AB vaccination induced high levels of lung-resident memory CD8+ T (TRM) cells, and this led to a rapid and strong recall of antigen-specific CD8+ T cell responses against Mtb challenge infection. Furthermore, when used in a BCG prime-SeV85AB boost strategy, SeV85AB vaccine significantly enhanced protection above that seen after BCG vaccination alone. Our findings suggest that CD8+ TRM cells that arise in lungs responding to this mucosal vaccination might help to protect against TB, and SeV85AB holds notable promise to improve BCG's protective efficacy in a prime-boost immunization regimen.

Variable Virulence and Efficacy of BCG Vaccine Strains in Mice and Correlation With Genome Polymorphisms.

Bacille Calmette-Guérin (BCG), an attenuated strain of Mycobacterium bovis, is the only vaccine available for tuberculosis (TB) control. However, BCG is not an ideal vaccine and has two major limitations: BCG exhibits highly variable effectiveness against the development of TB both in pediatric and adult populations and can cause disseminated BCG disease in immunocompromised individuals. BCG comprises a number of substrains that are genetically distinct. Whether and how these genetic differences affect BCG efficacy remains largely unknown. In this study, we performed comparative analyses of the virulence and efficacy of 13 BCG strains, representing different genetic lineages, in SCID and BALB/c mice. Our results show that BCG strains of the DU2 group IV (BCG-Phipps, BCG-Frappier, BCG-Pasteur, and BCG-Tice) exhibit the highest levels of virulence, and BCG strains of the DU2 group II (BCG-Sweden, BCG-Birkhaug) are among the least virulent group. These distinct levels of virulence may be explained by strain-specific duplications and deletions of genomic DNA. There appears to be a general trend that more virulent BCG strains are also more effective in protection against Mycobacterium tuberculosis challenge. Our findings have important implications for current BCG vaccine programs and for future TB vaccine development.

Electrochemical construction of three-dimensional porous Mn3O4 nanosheet arrays as an anode for the lithium ion battery.

Three-dimensional (3D) porous Mn3O4 nanosheet arrays were constructed via an electrodeposition followed by high temperature annealing using 3D porous Cu, prepared by a facile electroless plating method, as the substrate. The 3D pores and voids between the nanosheet arrays were able to provide rapid ion transfer channels, as well as accommodating the volumetric changes of Mn3O4 during the electrochemical cycling. Electrons can directly exchange between the substrate and the nanosheet units, avoiding curving and the long transfer distance in conventional electrodes constructed using casting technology. Furthermore, the nanosheets were transformed into the architecture with smaller sub-nanosheets on the pristine nanosheets after 1 cycle, facilitating ion transferring, and were thoroughly transformed into smaller sub-nanosheets after 1000 cycles but without obvious exfoliation, assuring good electrical contact between the active particles and substrate. Based on the above unique characteristics, the 3D porous Mn3O4 nanosheet arrays could be directly used as a binder-free and conductive-agent-free electrode to deliver ultrahigh electrochemical performance that is much better than achieved in previous reports. The first reversible capacity was 1166.3 mA h g(-1) and remained 667.9 mA h g(-1) after 1000 cycles at 1.0 A g(-1). Also, the reversible capacities at high current densities of 10.0 A g(-1) and 20.0 A g(-1) remained high at 416.1 and 216.7 mA h g(-1), respectively.

Mycobacterial MazG safeguards genetic stability via housecleaning of 5-OH-dCTP.

Generation of reactive oxygen species and reactive nitrogen species in phagocytes is an important innate immune response mechanism to eliminate microbial pathogens. It is known that deoxynucleotides (dNTPs), the precursor nucleotides to DNA synthesis, are one group of the significant targets for these oxidants and incorporation of oxidized dNTPs into genomic DNA may cause mutations and even cell death. Here we show that the mycobacterial dNTP pyrophosphohydrolase MazG safeguards the bacilli genome by degrading 5-OH-dCTP, thereby, preventing it from incorporation into DNA. Deletion of the (d)NTP pyrophosphohydrolase-encoding mazG in mycobacteria leads to a mutator phenotype both under oxidative stress and in the stationary phase of growth, resulting in increased CG to TA mutations. Biochemical analyses demonstrate that mycobacterial MazG can efficiently hydrolyze 5-OH-dCTP, an oxidized nucleotide that induces CG to TA mutation upon incorporation by polymerase. Moreover, chemical genetic analyses show that direct incorporation of 5-OH-dCTP into mazG-null mutant strain of Mycobacterium smegmatis (Msm) leads to a dose-dependent mutagenesis phenotype, indicating that 5-OH-dCTP is a natural substrate of mycobacterial MazG. Furthermore, deletion of mazG in Mycobacterium tuberculosis (Mtb) leads to reduced survival in activated macrophages and in the spleen of infected mice. This study not only characterizes the mycobacterial MazG as a novel pyrimidine-specific housecleaning enzyme that prevents CG to TA mutation by degrading 5-OH-dCTP but also reveals a genome-safeguarding mechanism for survival of Mtb in vivo.