[Effect of calorie-enriched formula on postoperative catch-up growth in infants with cyanotic congenital heart disease: a propective randomized controlled study].

OBJECTIVE: To study the effect of calorie-enriched formula on postoperative catch-up growth in infants with cyanotic congenital heart disease (CHD). METHODS: A total of 100 infants with cyanotic CHD who underwent surgical operation from January to December, 2017, were randomly divided into a high-calorie group (receiving calorie-enriched formula after surgery) and a conventional group (receiving standard formula after surgery), with 50 infants in each group. All infants were followed up for 6 months. The observation indices included body height, body weight, prealbumin, and N-terminal pro-brain natriuretic peptide before surgery, at the time of ventilator weaning and extubation after surgery, and at 1, 3, and 6 months after surgery. Height-for-age Z-score (HAZ), weight-for-age Z-score (WAZ), and weight-for-height Z-score (WHZ) were also assessed. Adverse reactions were recorded for both groups. RESULTS: There were 25 cases (50%) and 21 cases (42%) of malnutrition in the high-calorie group and the conventional group respectively before surgery (P > 0.05). The nutritional status of the two groups improved 6 months after surgery (P < 0.05). At 6 months after surgery, compared with the conventional group, the high-calorie group had a lower proportion of infants with malnutrition (18% vs 36%, P < 0.05) and also a lower proportation of infants with a WAZ score of < -2 (P < 0.05). The infants with malnutrion in the high-calorie group had higher HAZ, WAZ, and WHZ than those in the conventional group (P < 0.05). No gastrointestinal intolerance was observed in both groups during hospitalization. CONCLUSIONS: Compared with the standard formula, calorie-enriched formula can better help with postoperative catch-up growth in infants with cyanotic CHD.

Analysis of a customized cervical collar to improve neck posture during smartphone usage: a comparative study in healthy subjects.

PURPOSE: A slouching posture during smartphone usage increases gravitational loadings on the cervical spine, which may lead to neck pain and degeneration. The objective of the present study was to investigate the head, neck and trunk angles in different smartphone-usage postures, as well as the posture-correction effects and comfort scores of three neck collars. METHODS: This was a prospective cohort study in which 41 healthy young subjects aged 18-25 were recruited. The head, neck and trunk angles were measured in all participants during a neutral position and three smartphone-using postures, including sitting with and without back support and standing. The postural correction and comfort scores of three collars (Aspen Vista, Sport-aid and our customized 3D printed collars) were compared. RESULTS: Smartphone use increased the head and neck flexion angles in all postures, and sitting without back support showed the greatest head and neck flexion angles. The posture-correcting effect of the customized collar was better than the Aspen Vista and Sport-aid collars. In addition, the customized collar was more comfortable to wear than the other two collars in most contact areas. CONCLUSION: Smartphone use increased both the head and neck flexion in different postures, and the proposed customized 3D-printed cervical collar significantly reduced the head and neck angles. These slides can be retrieved under Electronic Supplementary Material.

Plane-to-plane analysis of mandibular misalignment in patients with facial asymmetry.

INTRODUCTION: Little is known regarding how the mandible rotates in facial asymmetry. The purpose of this study was to study mandibular misalignment with a new plane-to-plane analysis method in patients with facial asymmetry. METHODS: Optimal symmetry planes (OSPs) were generated by computing the greatest count of paired voxels on opposing sides of the computerized tomography image of the structure. The mandibular OSP was measured against the midfacial OSP for its alignment. The deviation angle formed by the 2 OSPs was broken down into a y-axis component (frontal deviation angle) and a z-axis component (horizontal deviation angle). Fifty-nine patients who sought correction for facial asymmetry were included for study. RESULTS: The new analysis method was feasible. Fifty patients (83%) had significant mandibular misalignment (deviation, ≥4° or 4 mm). The locations of the rotational axes exhibited significant variations that could explain the varied features of the asymmetry. The frontal deviation angle (mean, 3.80° ± 3.89°) was significantly larger than the horizontal deviation angle (mean, 2.77° ± 1.71°). There was no significant correlation between the horizontal deviation angle and the anterior deviation distance or the posterior deviation distance. CONCLUSIONS: Proper mandibular realignment was suggested to be the primary aim in surgical correction of most jawbone asymmetries. Because of the greatly varied rotational axes and the obscure z-axis rotation, realignment could be difficult with the traditional approach. The OSP-based analysis is advocated to guide planning.

Resection of giant invasive sacral schwannoma using image-based customized osteotomy tools.

BACKGROUND: Giant invasive sacral schwannomas are rare tumors. Surgical excision is the standard treatment and total resection is performed if feasible. Advances in three-dimensional (3D) imaging technology have facilitated treatment designs of complex surgical procedures. OBJECTIVE: Our aim was to evaluate virtual surgical planning, computer-aided design (CAD), and manufacturing with 3D printing technology of the customized osteotomy guiding device in giant invasive sacral schwannoma resection. METHODS: A digital 3D model of the sacrum, including the giant invasive sacral schwannoma, was rendered from patient computer tomography (CT) images. The surgeon chose excision margins of the tumor. Based on the virtual surgical planning, the customized guiding tool for osteotomy was designed and manufactured using the CAD and 3D printing. RESULTS: We used the guiding block to successfully excise a giant sacral schwannoma using only a posterior approach to achieve gross total resection. No augmented spinal instrumentation was used to prevent iatrogenic spinal instability. Clinical symptoms resolved dramatically after operation. No spinal instability occurred during follow-up. CONCLUSION: With the assistance of an image-based customized osteotomy guiding device, we achieved both goals of tumor resection and bone preservation in giant sacral schwannoma resection. With thorough surgical planning, this technology can be applied to the complex surgical procedures easily and reliably.

Use of the matching optimal symmetry plane method in planning surgical correction of facial asymmetry--a preliminary report of 20 patients.

PURPOSE: A voxel-based median plane (optimal symmetry plane [OSP]) was developed to assess facial bone asymmetry. The purpose of the present study was to introduce a new method of planning surgical correction of facial asymmetry using the OSPs as guides and test its effectiveness. PATIENTS AND METHODS: A retrospective study was conducted of 20 facial asymmetry patients with a mandibular deviation of 4 mm or greater or 4° or more that required surgical correction. In the test group (n = 8), the plans for asymmetry correction were formulated using the matching OSP method, in which the OSPs of the facial bones are tracked and matched during the model surgery setup. In the control group (n = 12), traditional planning was conducted. The traditional plans were cross-checked for symmetry through tracking and revised as needed. The symmetry results of the plans were compared between the 2 groups and within the control group. The outcome measures were the deviation distances between the OSPs of the midface and mandible at the anterior or posterior mandible, the occlusal plane cant, and the angle formed by the 2 OSPs. Surgery was performed in accordance with the final plans, and the results were assessed for symmetry. RESULTS: The traditional plans left a major mandibular deviation in 5 of the 12 control subjects compared with none in the test group. The test group did significantly better than the control group. The revised plans were significantly better than the initial plans. Postoperatively, significant improvements in symmetry were observed. CONCLUSION: The new method resulted in surgical plans that brought about significantly less postoperative mandibular deviation while maintaining a reasonable occlusion.

Effect of spleen lymphocytes on the splenomegaly in hepatocellular carcinoma-bearing mice.

OBJECTIVE: To study the effect of spleen lymphocytes on the splenomegaly by hepatocellular carcinoma-bearing mouse model. METHODS: Cell counts, cell cycle distribution, the percentage of lymphocytes subsets and the levels of IL-2 were measured, and two-dimensional gel electrophoresis (2-DE) was used to investigate the relationship between spleen lymphocytes and splenomegaly in hepatocellular carcinoma-bearing mice. RESULTS: Compared with the normal group, the thymus was obviously atrophied and the spleen was significantly enlarged in the tumor-bearing group. Correlation study showed that the number of whole spleen cells was positively correlated with the splenic index. The cell diameter and cell-cycle phase distribution of splenocytes in the tumor-bearing group showed no significant difference compared to the normal group. The percentage of CD3+ T lymphocytes and CD8+ T lymphocytes in spleen and peripheral blood of tumor-bearing mice were substantially higher than that in the normal mice. Meanwhile, the IL-2 level was also higher in the tumor-bearing group than in the normal group. Furthermore, two dysregulated protein, ß-actin and S100-A9 were identified in spleen lymphocytes from H22-bearing mice, which were closely related to cellular motility. CONCLUSION: It is suggested that dysregulated ß-actin and S100-A9 can result in recirculating T lymphocytes trapped in the spleen, which may explain the underlying cause of splenomegaly in H22-bearing mice.

A Three-Dimensional Morphological Assessment for Evaluating Pre- and Postsurgery in Cervical Laminoplasty.

OBJECTIVE: The efficacy of medical treatments and the changes in radiologic imaging before and after treatment have consistently remained pivotal factors. This is particularly critical for surgical procedures, where precise evaluation of disparities pre and postsurgery or the accuracy of implantation is paramount. Based on three-dimensional morphological interests, we provide an automatic quantification evaluation method that delivers an evident base for assessing the outcomes of a widely employed surgical technique, cervical laminoplasty. METHODS: The sample study included patients who underwent cervical laminoplasty for cervical spondylotic myelopathy/ossification of the longitudinal ligament. We present a superimposition method that facilitates a unique and precise assessment between pre and postsurgery. The degree of expansion was evaluated by the canal volume increase and canal expansion rate after surgery. RESULTS: There were 31 patients with 112 vertebral segments measured. The target cervical's pre and postoperative canal areas were 122.63 ± 30.34 and 196.50 ± 37.10 mm2, respectively (P < 0.001). The average cervical canal expansion rate was 64.42%. The expansion effect of C5 cervical laminoplasty was the maximum (71.01%), and the canal volume of other segments expanded by approximately 60%. The functional outcomes demonstrated significant improvements in symptoms. CONCLUSIONS: The quantification evaluation method can be utilized for any morphology changes before and after laminoplasty, as it does not lead to errors or variations from different inspection machines or human factors. The automatic method delivers an evident base for assessing the outcomes of a widely employed surgical technique.

Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report.

RATIONALE: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. PATIENT CONCERNS: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. DIAGNOSES: The giant cell tumor invades the patient's MCP joint in an index proximal phalanx. INTERVENTIONS: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation. OUTCOMES: After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. LESSONS: The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Complex facial deformity reconstruction with a surgical guide incorporating a built-in occlusal stent as the positioning reference.

Computer-aided design has gained increasing popularity in clinical practice, and the advent of rapid prototyping technology has further enhanced the quality and predictability of surgical outcomes. It provides target guides for complex bony reconstruction during surgery. Therefore, surgeons can efficiently and precisely target fracture restorations. Based on three-dimensional models generated from a computed tomographic scan, precise preoperative planning simulation on a computer is possible. Combining the interdisciplinary knowledge of surgeons and engineers, this study proposes a novel surgical guidance method that incorporates a built-in occlusal wafer that serves as the positioning reference.Two patients with complex facial deformity suffering from severe facial asymmetry problems were recruited. In vitro facial reconstruction was first rehearsed on physical models, where a customized surgical guide incorporating a built-in occlusal stent as the positioning reference was designed to implement the surgery plan. This study is intended to present the authors' preliminary experience in a complex facial reconstruction procedure. It suggests that in regions with less information, where intraoperative computed tomographic scans or navigation systems are not available, our approach could be an effective, expedient, straightforward aid to enhance surgical outcome in a complex facial repair.

A Symmetry-Based Superposition Method for Planning and Surgical Outcome Assessment.

Computer-aided surgical planning has been widely used to increase the safety and predictability of surgery. The validation of the target of surgical planning to surgical outcomes on a patient-specific model is an important issue. The aim of this research was to develop a robust superposition method to assess the deviation of planning and outcome by using the symmetrical characteristic of the affected target. The optimal symmetry plane (OSP) of an object is usually used to evaluate the degree of symmetry of an object. We proposed a refined OSP-based contouring method to transfer a complex three-dimensional superposition operation into two dimensions. We compared the typical iterative closest point (ICP) algorithm with the refined OSP-based contouring method and examined the differences between them. The results using the OSP-based method were much better than the traditional method. As for processing time, the OSP-based contouring method was 11 times faster than the ICP method overall. The proposed method was not affected by the metallic artifacts from medical imaging or geometric changes due to surgical intervention. This technique can be applied for post-operative assessment, such as quantifying the differences between surgical targets and outcomes as well as performing long-term medical follow-up.

Combining Laminoplasty With Artificial Disc Replacement for the Treatment of Cervical Spondylotic Myelopathy With Congenital Cervical Stenosis.

BACKGROUND: Cervical spondylotic myelopathy (CSM) is a very common and devastating spinal disease. Congenital cervical stenosis (CCS) is the most common cause. We aimed to elucidate the security, effectivity, and feasibility of surgery combining laminoplasty with artificial disc replacement (ADR) to treat CSM patients with radiculopathy, especially for preserving the range of motion (ROM) of the cervical spine. METHOD: Between August 2008 and April 2019, 39 patients with multiple CSM caused by CCS were enrolled in the present study. All patients received laminoplasty first and then ADR. We used a retrospective collection of data for evaluating the functional and radiologic outcomes, especially regarding preservation of ROM. RESULTS: Each patient underwent at least a 2-year postoperative follow-up. The Japanese Orthopedic Association score showed great improvements at 6 months. The ADR index-level ROM was preserved during follow-up. The subaxial Cobb angle could also be retained in the whole cervical spine, and the spinal canal diameter could be expanded by more than 52.6%. There were no severe complications or side effects, and no patients needed secondary surgery. CONCLUSIONS: We aimed to treat multiple levels of CSM with adequate decompression without too many intervertebral disc replacements. We were able to expand the spinal canal directly for these patients with CCS and needed only 1- or 2-level ADR to treat them with associated radiculopathy. This combined surgical strategy was secure, effective, and was able to preserve the ROM of the cervical spine.

The emission patterns of volatile organic compounds during aerobic biotreatment of municipal solid waste using continuous and intermittent aeration.

Because volatile organic compounds (VOCs) are one of the main concerns during municipal solid waste (MSW) treatment, the release patterns and the environmental effects of VOCs were investigated during laboratory-scale aerobic biotreatments of MSW with continuous and intermittent negative ventilation. When the same airflow amounts were used, intermittent ventilation was found to reduce the total VOC emissions from continuous ventilation process by 28%. In this study, 23 types of volatile organic compounds were analyzed, of which butyraldehyde, ethanol, and butanone were emitted in the highest concentrations of 748, 372, and 260 mg/m3, respectively. During the aerobic biotreatment process, ketones, aldehydes, and alcohols were primarily released during the first 4 days, accounting for 86-98% of the total VOC emissions during this period. The emission concentrations of malodorous sulfide compounds displayed two peaks on day 4 and day 9, with the contribution to the total VOC emissions being enhanced from less than 10% to 76-83%. The release of terpenes and aromatics lasted for more than 10 days with no significant emission peaks and the proportions of those compounds in the total VOCs increased gradually, but no more than 50% even at the end of the process. Considering the strength of the odors, aldehydes were the predominant contributors at the beginning of the experiment, whereas malodorous sulfide compounds became the most odorous compound as the biological process continued. Most of the VOCs emitted at the concentrations beneath the level causing health threat to the workers.

Biodrying of municipal solid waste under different ventilation modes: drying efficiency and aqueous pollution.

Ventilation is very important during the biodrying process because it affects the biodrying efficiency and secondary pollution. In this study, three ventilation modes-intermittent negative ventilation (IN), continuous negative ventilation (CN) and intermittent positive ventilation (IP)-were used to provide the same amount of total air during biodrying of municipal solid waste (MSW). During the entire 16-day experiment, 68.4%, 68.7% and 67.2% of water contained in the initial waste was removed under IN, CN and IP trials respectively. The ratio of water loss to volatile solid loss was used to evaluate the biodrying efficiency, with values of 5.35, 5.93 and 4.82 being observed for IN, CN and IP trials respectively. The total organic carbon concentrations of the leachate generated from the biodrying of waste were as high as 25,000 mg/l, while those of the condensate were not higher than 3500 mg/l. During the entire process, the average ammonia concentrations of leachate and condensate were 1350 mg/l and 2140 mg/l respectively. From the aspect of biodrying efficiency, continuous negative ventilation was the most preferable ventilation mode for biodrying of MSW, while special care should be taken to prevent aqueous pollution if it is used in a MSW treatment plant.

An Automatic Voxel-Based Method for Optimal Symmetry Plane Generation for the Maxillofacial Region in Severe Asymmetry Cases.

Symmetry is representative of aesthetics and health in all kinds of vertebrates, especially the human face. Therefore, to automatically locate the appropriate symmetry plane is crucial. The aim of this study was to develop an automatic and reliable method to determine the symmetry plane of the maxillofacial region. We compared the proposed method of determining the symmetry plane by assessing landmark-based and surface-based methods by way of quantitative symmetry assessments. Statistical analysis was applied to evaluate whether significant difference existed among these three kinds of symmetry planes. Twenty cases who had a diagnosis of severe facial asymmetry were evaluated retrospectively. The results showed that searching for the symmetry plane using a voxel-based method, named the optimal symmetry plane (OSP), achieved the most representative symmetry according to the outcomes of the trials. The OSP was significantly more symmetrical than the other two planes, as determined by other methods. The paired-voxel computation method proposed in this research is a robust and reliable method for identifying the unique symmetry plane for patients with severe facial asymmetry. Symmetry is of crucial significance for all kinds of vertebrates, including its clinical implications for surgical planning in orthognathic surgery.

Supercritical Carbon Dioxide Decellularized Xenograft-3D CAD/CAM Carved Bone Matrix Personalized for Human Bone Defect Repair.

About 30-50% of oral cancer patients require mandibulectomy and autologous fibula reconstruction. Autograft is the gold standard choice because of its histocompatibility; however, it requires additional surgery from the patient and with possible complications such as loss of fibula leading to calf weakening in the future. Allograft and xenograft are alternatives but are susceptible to immune response. Currently, no personalized bone xenografts are available in the market for large fascial bone defects. In addition, a large-sized complex shape bone graft cannot be produced directly from the raw material. We propose the use of porcine bones with 3D CAD/CAM carving to reconstruct a personalized, wide range and complex-shaped bone. We anticipate that patients can restore their native facial appearance after reconstruction surgery. Supercritical CO2 (SCCO2) technology was employed to remove the cells, fat and non-collagenous materials while maintaining a native collagen scaffold as a biomedical device for bone defects. We successfully developed 3D CAD/CAM carved bone matrices, followed by SCCO2 decellularization of those large-sized bones. A lock-and-key puzzle design was employed to fulfil a wide range of large and complex-shaped maxillofacial defects. To conclude, the 3D CAD/CAM carved bone matrices with lock and key puzzle Lego design were completely decellularized by SCCO2 extraction technology with intact natural collagen scaffold. In addition, the processed bone matrices were tested to show excellent cytocompatibility and mechanical stiffness. Thus, we can overcome the limitation of large size and complex shapes of xenograft availability. In addition, the 3D CAD/CAM carving process can provide personalized tailor-designed decellularized bone grafts for the native appearance for maxillofacial reconstruction surgery for oral cancer patients and trauma patients.

Comparison of virtual reality versus physical reality on movement characteristics of persons with Parkinson's disease: effects of moving targets.

OBJECTIVE: To compare the performance of reaching for stationary and moving targets in virtual reality (VR) and physical reality in persons with Parkinson's disease (PD). DESIGN: A repeated-measures design in which all participants reached in physical reality and VR under 5 conditions: 1 stationary ball condition and 4 conditions with the ball moving at different speeds. SETTING: University research laboratory. PARTICIPANTS: Persons with idiopathic PD (n=29) and age-matched controls (n=25). INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Success rates and kinematics of arm movement (movement time, amplitude of peak velocity, and percentage of movement time for acceleration phase). RESULTS: In both VR and physical reality, the PD group had longer movement time (P<.001) and lower peak velocity (P<.001) than the controls when reaching for stationary balls. When moving targets were provided, the PD group improved more than the controls did in movement time (P<.001) and peak velocity (P<.001), and reached a performance level similar to that of the controls. Except for the fastest moving ball condition (0.5-s target viewing time), which elicited worse performance in VR than in physical reality, most cueing conditions in VR elicited performance generally similar to those in physical reality. CONCLUSIONS: Although slower than the controls when reaching for stationary balls, persons with PD increased movement speed in response to fast moving balls in both VR and physical reality. This suggests that with an appropriate choice of cueing speed, VR is a promising tool for providing visual motion stimuli to improve movement speed in persons with PD. More research on the long-term effect of this type of VR training program is needed.

Effects of virtual reality training on functional reaching movements in people with Parkinson's disease: a randomized controlled pilot trial.

OBJECTIVE: To investigate whether practising reaching for virtual moving targets would improve motor performance in people with Parkinson's disease. DESIGN: Randomized pretest-posttest control group design. SETTING: A virtual reality laboratory in a university setting. PARTICIPANTS: Thirty-three adults with Parkinson's disease. INTERVENTIONS: The virtual reality training required 60 trials of reaching for fast-moving virtual balls with the dominant hand. The control group had 60 practice trials turning pegs with their non-dominant hand. MAIN OUTCOME MEASURES: Pretest and posttest required reaching with the dominant hand to grasp real stationary balls and balls moving at different speeds down a ramp. Success rates and kinematic data (movement time, peak velocity and percentage of movement time for acceleration phase) from pretest and posttest were recorded to determine the immediate transfer effects. RESULTS: Compared with the control group, the virtual reality training group became faster (F = 9.08, P = 0.005) and more forceful (F = 9.36, P = 0.005) when reaching for real stationary balls. However, there was no significant difference in success rate or movement kinematics between the two groups when reaching for real moving balls. CONCLUSION: A short virtual reality training programme improved the movement speed of discrete aiming tasks when participants reached for real stationary objects. However, the transfer effect was minimal when reaching for real moving objects.

Reconstruction of three-dimensional lumbar vertebrae from biplanar x-rays.

Objective. Vertebrae models from computer tomographic (CT) imaging are extensively used in image-guided surgical systems to deliver percutaneous orthopaedic operations with minimum risks, but patients may be exposed to excess radiation from the pre-operative CT scans. Generating vertebrae models from intra-operative x-rays for image-guided systems can reduce radiation exposure to the patient, and the surgeons can acquire the vertebrae's relative positions during the operation; therefore, we proposed a lumbar vertebrae reconstruction method from biplanar x-rays.Approach. Non-stereo-corresponding vertebral landmarks on x-rays were identified as targets for deforming a set of template vertebrae; the deformation was formulated as a minimisation problem, and was solved using the augmented Lagrangian method. Mean surface errors between the models reconstructed using the proposed method and CT scans were measured to evaluate the reconstruction accuracy.Main results. The evaluation yielded mean errors of 1.27 mm and 1.50 mm inin vitroexperiments on normal vertebrae and pathological vertebrae, respectively; the outcomes were comparable to other template-based methods.Significance. The proposed method is a viable alternative to provide digital lumbar to be used in image-guided systems, where the models can be used as a visual reference in surgical planning and image-guided applications in operations where the reconstruction error is within the allowable surgical error.

Protective effects of flavonoids from the leaves of Carya cathayensis Sarg. against H2O2-induced oxidative damage and apoptosis in vitro.

Hydrogen peroxide (H2O2) can induce apoptosis by releasing reactive oxygen species (ROS) and reactive nitrogen species, which cause mitochondrial damage. The present study aimed to investigate the protective effects of flavonoids from the leaves of Carya cathayensis Sarg. against H2O2-induced oxidative damage and apoptosis in vitro. The bioactivity of total flavonoids (TFs) and five monomeric flavonoids [cardamonin (Car), pinostrobin chalcone, wogonin, chrysin and pinocembrin] from the leaves of Carya cathayensis Sarg. (LCCS) were tested to prevent oxidative damage to rat aortic endothelial cells (RAECs) induced by H2O2. Oxidated superoxide dismutase, glutathione peroxidase, malondialdehyde, lactate dehydrogenase and ROS were analyzed to evaluate the antioxidant activity. Gene and protein expression patterns were assessed using reverse transcription-quantitative PCR and western blotting, respectively. The results indicated that TFs and Car inhibited H2O2-induced cytotoxicity and apoptosis of RAECs. Additionally, they regulated the level of oxidase and inhibited the production of ROS. Overall, the TFs extracted from LCCS could potentially be developed as effective candidate drugs to prevent oxidative stress in the future; moreover, they could also provide a direction in investigations for preventing antioxidant activity through the ROS pathway.

Discussion on the Management Method of COVID-19 Infection Prevention in Medical Residents.

BACKGROUND: To explore the homogenized management method of infection prevention and control in medical resident under COVID-19 epidemic situation. METHODS: Overall, 268 members in Ningbo Medical Group which was participating in the management of novel coronavirus pneumonia in Wuhan, China were managed homogeneously in terms of personal cleaning and disinfection of articles, prevention and control of infection in life, training and assessment of relevant infection knowledge in hospitals. RESULTS: In the epidemic situation, the homogenization management of infection prevention and control in the resident of medical team is an important measure to block the transmission link. CONCLUSION: 1. Conduct homogenization management on the training of hospital infection knowledge for medical staff. 2. Conduct homogeneous management of effective assessment of training knowledge. 3. Conduct homogenization management from personal cleaning and disinfection, as well as infection prevention and control in daily life.