Gas-Phase Reactivity of Quinoline-Based Singlet Oxenium Cations.

Isomeric quinolyloxenium cations were generated in the gas phase in an ion trap mass spectrometer to explore their reactions. The structures of some products were identified via collision-activated dissociation experiments involving model compounds to demonstrate that they have the expected heavy atom connectivity. The lack of radical reactions suggests that the cations have closed-shell singlet electronic ground states. Calculations (CASPT2/CASSCF(16,14)/cc-pVTZ//CASSCF(16,14)/cc-pVTZ) predict that their closed-shell singlet (1A') ground states are lower in energy by ca. 25 kcal mol-1 than their lowest-lying excited states. All cations are reactive toward dimethyl disulfide, dimethyl sulfide, and allyl iodide and most toward water and moderately reactive toward cyclohexane, reflecting their strongly electrophilic nature. They form adducts with nucleophiles in exothermic reactions (ca. 50 kcal mol-1 for dimethyl sulfide) that can fragment or be stabilized via IR emission. Most water adducts spontaneously isomerize to lower-energy tautomers. The nucleophiles preferentially add to those carbon atoms in the benzene ring that have the greatest positive charge (but not the carbonyl carbon). The cations react with cyclohexane via hydride abstraction by the oxygen atom. This is the only reaction that initially involves the oxygen atom and hence reflects the formally positively charged, monovalent oxygen atom in these cations.

Gas-Phase Reactivity of Phenylcarbyne Anions.

Gas-phase reactivities of the phenylcarbyne anion and its four derivatives were studied using a linear quadrupole ion trap mass spectrometer. The phenylcarbyne anions were calculated to have a triplet ground state (singlet-triplet splittings of 4-9 kcal mol-1), with the exception of the 4-cyanophenylcarbyne anion that has a singlet ground state (singlet-triplet splitting of -1.9 kcal mol-1). Only the phenylcarbyne anions with a triplet ground state react with acetone and dimethyl disulfide via radical mechanisms. On the other hand, only the phenylcarbyne anion with a singlet ground state abstracts H2O and H2C═C═O from acetic acid via electrophilic addition of the reagents to the anion. Finally, two hydroxy-substituted phenylcarbyne anions (with triplet ground states) partially tautomerize with the assistance of reagent molecules to the more stable distonic phenylcarbene anions. This occurs via abstraction of a proton from the reagent by the phenylcarbyne anion to generate a neutral (triplet) phenylcarbene and a reagent anion, which is followed by proton abstraction from the hydroxyl group of the neutral phenylcarbene by the reagent anion to generate the distonic phenylcarbene anion in an excited triplet state. Experiments performed on deuterated hydroxy-substituted phenylcarbyne anions verified the mechanism. The reactivities of the distonic phenylcarbene anions were found to be quite different from those of the phenylcarbyne anions. For example, they were found to abstract CH2 from acetonitrile, which is initiated by C-H insertion─typical singlet carbene reactivity.

Differentiation of Protonated Sulfonate Esters from Isomeric Sulfite Esters and Sulfones by Gas-Phase Ion-Molecule Reactions Followed by Diagnostic Collision-Activated Dissociation in Tandem Mass Spectrometry Experiments.

Sulfonate esters, a class of potentially mutagenic drug impurities, are strictly regulated in pharmaceuticals. On the other hand, sulfite esters and sulfones, analogs of sulfonate esters, have limited safety concerns. However, previously developed analytical methods for sulfonate ester identification cannot be used to differentiate sulfonate esters from the isomeric sulfite esters and sulfones. A tandem mass spectrometric method is introduced here for the differentiation of these compounds. Diisopropoxymethylborane (DIMB) reacts with protonated sulfonate esters, sulfite esters, and sulfones (and many other compounds) in the gas phase to form the product ion [M + H + DIMB - CH3CH(OH)CH3]+. Upon collision-activated dissociation (CAD), these product ions generate diagnostic fragment ions that enable the differentiation of sulfonate esters, sulfite esters, and sulfones from each other. For example, SO2 elimination enabled the unambiguous identification of sulfite esters. On the other hand, elimination of CH3B═O followed by elimination of (CH3)2C═O was only observed for sulfonate esters. Neither type of diagnostic fragment ions was detected for the products of sulfones. However, the product ions formed for sulfones with an additional hydroxyl substituent underwent the elimination of another CH3CH(OH)CH3 molecule, which enabled their identification. Finally, ion-molecule reactions of DIMB with various other functionalities were also examined. Some of them yielded the product ions [M + H + DIMB - CH3CH(OH)CH3]+ but none of these product ions underwent the diagnostic CAD reactions discussed above. Quantum chemical calculations were employed to explore the mechanisms of the reactions. The limits of detection for the diagnostic ion-molecule reaction product ions in high-performance liquid chromatography (HPLC)/mass spectrometry (MS2) experiments were found to range from 0.075 to 1.25 nmol.

A Diagnostic Nitrosamine Detection Approach for Pharmaceuticals by Using Tandem Mass Spectrometry Based on Diagnostic Gas-Phase Ion-Molecule Reactions.

N-Nitrosamines are strictly regulated in pharmaceutical products due to their carcinogenic nature. Therefore, the ability to rapidly and reliably identify the N-nitroso functionality is urgently needed. Unfortunately, not all ionized N-nitroso compounds produce diagnostic fragment ions and hence tandem mass spectrometry based on collision-activated dissociation (CAD) cannot be used to consistently identify the N-nitroso functionality. Therefore, a more reliable method was developed based on diagnostic functional-group selective ion-molecule reactions in a linear quadrupole ion trap mass spectrometer. 2-Methoxypropene (MOP) was identified as a reagent that reacts with protonated N-nitrosamines in a diagnostic manner by forming an adduct followed by the elimination of 2-propenol (CH3C(OH)═CH2]). From 18 protonated N-nitrosamine model compounds studied, 15 formed the diagnostic product ion. The lack of the diagnostic reaction for three of the N-nitrosamine model compounds was rationalized based on the presence of a pyridine ring that gets preferentially protonated instead of the N-nitroso functionality. These N-nitrosamines can be identified by subjecting a stable adduct formed upon ion-molecule reactions with MOP to CAD. Further, the ability to use ion-molecule reactions followed by CAD to differentiate protonated O-nitroso compounds with a pyridine ring from analogous N-nitrosamines was demonstrated This methodology is considered to be robust for the identification of the N-nitroso functionality in unknown analytes. Lastly, HPLC/MS2 experiments were performed to determine the detection limit for five FDA regulated N-nitrosamines.

Spin-Spin Coupling Controls the Gas-Phase Reactivity of Aromatic σ-Type Triradicals.

Examination of the reactions of σ-type quinolinium-based triradicals with cyclohexane in the gas phase demonstrated that the radical site that is the least strongly coupled to the other two radical sites reacts first, independent of the intrinsic reactivity of this radical site, in contrast to related biradicals that first react at the most electron-deficient radical site. Abstraction of one or two H atoms and formation of an ion that formally corresponds to a combination of the ion and cyclohexane accompanied by elimination of a H atom ("addition-H") were observed. In all cases except one, the most reactive radical site of the triradicals is intrinsically less reactive than the other two radical sites. The product complex of the first H atom abstraction either dissociates to give the H-atom-abstraction product and the cyclohexyl radical or the more reactive radical site in the produced biradical abstracts a H atom from the cyclohexyl radical. The monoradical product sometimes adds to cyclohexene followed by elimination of a H atom, generating the "addition-H" products. Similar reaction efficiencies were measured for three of the triradicals as for relevant monoradicals. Surprisingly, the remaining three triradicals (all containing a meta-pyridyne moiety) reacted substantially faster than the relevant monoradicals. This is likely due to the exothermic generation of a meta-pyridyne analog that has enough energy to attain the dehydrocarbon atom separation common for H-atom-abstraction transition states of protonated meta-pyridynes.

Characterization of Protonated Substituted Ureas by Using Diagnostic Gas-Phase Ion-Molecule Reactions Followed by Collision-Activated Dissociation in Tandem Mass Spectrometry Experiments.

Substituted ureas correspond to a class of organic compounds commonly used in agricultural and chemical fields. However, distinguishing between different ureas and differentiating substituted ureas from other compounds with similar structures, such as amides, N-oxides, and carbamates, are challenging. In this paper, a four-stage tandem mass spectrometry method (MS4) is introduced for this purpose. This method is based on gas-phase ion-molecule reactions of isolated, protonated analytes ([M + H]+) with tris(dimethylamino)borane (TDMAB) (MS2) followed by subjecting a diagnostic product ion to two steps of collision-activated dissociation (CAD) (MS3 and MS4). All the analyte ions reacted with TDMAB to form a product ion [M + H + TDMAB - HN(CH3)2]+. The product ion formed for substituted ureas and amides eliminated another HN(CH3)2 molecule upon CAD to generate a fragment ion [M + H + TDMAB - 2HN(CH3)2]+, which was not observed for many other analytes, such as N-oxides, sulfoxides, and pyridines (studied previously). When the [M + H + TDMAB - 2HN(CH3)2]+ fragment ion was subjected to CAD, different fragment ions were generated for ureas, amides, and carbamates. Fragment ions diagnostic for the ureas were formed via elimination of R-N═C═O (R = hydrogen atom or a substituent), which enabled the differentiation of ureas from amides and carbamates. Furthermore, these fragment ions can be utilized to classify differently substituted ureas. Quantum chemical calculations were employed to explore the mechanisms of the reactions. The limit of detection for the diagnostic ion-molecule reaction product ion in HPLC/MS2 experiments was found to range from 20 to 100 nM.

Protonated Ground-State Singlet meta-Pyridynes React from an Excited Triplet State.

The gaseous 2,6-didehydropyridinium cation and its derivatives transfer a proton to reagents for which the reaction for their singlet ground states is too endothermic to be observed. These reactions occur from the lowest-energy excited triplet states, which has not been observed (or reported) for other meta-benzyne analogues. Quantum chemical calculations indicate that the (excited) triplet states are stronger Brønsted acids than their (ground) singlet states, likely due to unfavorable three-center, four-electron interactions in the singlet-state conjugate bases. The cations have substantially smaller (calculated) singlet-triplet (S-T) splittings (ranging from ca. -11 to -17 kcal mol-1) than other related meta-benzyne analogues (e.g., -23.4 kcal mol-1 for the 3,5-isomer). This is rationalized by the destabilization of the singlet states (relative to the triplet states) by reduced (spatial) overlap of the nonbonding molecular orbitals due to the presence of the nitrogen atom between the radical sites (making the ring more rigid). Both the singlet and triplet states are believed to be generated upon formation of these biradicals via energetic collisions due to their small S-T splittings. It appears that once the triplet states are formed, the rate of proton transfer is faster than the rate of intersystem crossing unless the biradicals contain heavy atoms.

Studies of the Fragmentation Mechanisms of Deprotonated Lignin Model Compounds in Tandem Mass Spectrometry.

Unlabeled and deuterium-labeled dimeric lignin model compounds with ß-O-4 linkages were evaporated and ionized using negative ion mode electrospray ionization, transferred into a linear quadrupole ion trap, isolated, and subjected to collision-activated dissociation (CAD; MS2 experiments). The elemental compositions of the fragment ions were determined by using a high-resolution Orbitrap mass analyzer, and their structures were examined using further CAD experiments (MSn experiments wherein n = 2-5). Data analysis was facilitated by determining the fragmentation pathways for several deprotonated model compounds. The structures of the key fragment ions of several pathways were determined by comparison of the CAD mass spectra measured for undeuterated and deuterated analogues and for deprotonated authentic compounds. Some of the proposed reaction mechanisms were tested by examining additional deprotonated synthetic model compounds. Quantum chemical calculations were used to delineate the most likely reaction pathways and reaction mechanisms. This work provides basic information needed for the design of tandem mass spectrometry-based CAD sequencing strategies for mixtures of lignin degradation products.

Differentiation of Deprotonated Acyl-, N-, and O-Glucuronide Drug Metabolites by Using Tandem Mass Spectrometry Based on Gas-Phase Ion-Molecule Reactions Followed by Collision-Activated Dissociation.

Glucuronidation, a common phase II biotransformation reaction, is one of the major in vitro and in vivo metabolism pathways of xenobiotics. In this process, glucuronic acid is conjugated to a drug or a drug metabolite via a carboxylic acid, a hydroxy, or an amino group to form acyl-, O-, and/or N-glucuronide metabolites, respectively. This process is traditionally thought to be a detoxification pathway. However, some acyl-glucuronides react with biomolecules in vivo, which may result in immune-mediated idiosyncratic drug toxicity (IDT). In order to avoid this, one may attempt in early drug discovery to modify the lead compounds in such a manner that they then have a lower probability of forming reactive acyl-glucuronide metabolites. Because most drugs or drug candidates bear multiple functionalities, e.g., hydroxy, amino, and carboxylic acid groups, glucuronidation can occur at any of those. However, differentiation of isomeric acyl-, N-, and O-glucuronide derivatives of drugs is challenging. In this study, gas-phase ion-molecule reactions between deprotonated glucuronide metabolites and BF3 followed by collision-activated dissociation (CAD) in a linear quadrupole ion trap mass spectrometer were demonstrated to enable the differentiation of acyl-, N-, and O-glucuronides. Only deprotonated N-glucuronides and deprotonated, migrated acyl-glucuronides form the two diagnostic product ions: a BF3 adduct that has lost two HF molecules, [M - H + BF3 - 2HF]-, and an adduct formed with two BF3 molecules that has lost three HF molecules, [M - H + 2BF3 - 3HF]-. These product ions were not observed for deprotonated O-glucuronides and unmigrated, deprotonated acyl-glucuronides. Upon CAD of the [M - H + 2BF3 - 3HF]- product ion, a diagnostic fragment ion is formed via the loss of 2-fluoro-1,3,2-dioxaborale (MW of 88 Da) only in the case of deprotonated, migrated acyl-glucuronides. Therefore, this method can be used to unambiguously differentiate acyl-, N-, and O-glucuronides. Further, coupling this methodology with HPLC enables the differentiation of unmigrated 1-ß-acyl-glucuronides from the isomeric acyl-glucuronides formed upon acyl migration. Quantum chemical calculations at the M06-2X/6-311++G(d,p) level of theory were employed to probe the mechanisms of the reactions of interest.

Enantioselective synthesis of spirooxindole benzoquinolizines via organo-catalyzed cascade reactions.

A Michael-Mannich-hemiaminalization-dehydration cascade reaction was developed for the construction of spirooxindole benzoquinolizine derivatives. Additionally, spirooxindole benzoindolizidine was prepared conveniently through a ring-contracted rearrangement reaction from spirooxindole benzoquinolizine.

Real-Time Mass Spectrometric Detection of Reaction Intermediates Formed during Laser-Induced UV/H2O2 Advanced Oxidation of 2-Methylbenzoisothiazol-3-one.

Knowledge on short-lived reaction intermediates is often essential for mechanistic investigations of organic reactions and for reaction optimization. Unfortunately, most conventional analytical methods are too slow to allow the detection of short-lived reaction intermediates. Herein, a direct laser desorption/ionization method coupled with linear quadrupole ion trap/orbitrap high-resolution tandem mass spectrometry was used for the detection and structural characterization of several previously proposed but undetected reaction intermediates formed during laser-induced UV/H2O2 advanced oxidation of 2-methylbenzoisothiazol-3-one. The elemental compositions of most detected (ionized) compounds were determined. Tandem mass spectrometry experiments based on gas-phase collision-activated dissociation (CAD) were conducted to gain information on the ion structures. The mechanisms of the CAD reactions were explored using high-level quantum chemical calculations to support the structures proposed for the neutral reaction intermediates formed during the laser-induced UV/H2O2 advanced oxidation of 2-methylbenzoisothiazol-3-one. In the negative-ion mode experiments, anions corresponding to three reaction intermediates were detected and structurally characterized: 1-hydroxy-2-methyl-1,2-dihydro-3H-1λ4-benzo[d]isothiazol-3-one, 2-(methylcarbamoyl)benzenesulfinic acid, and 2-(dihydroxy(oxo)-λ6-sulfaneyl)-N-methylbenzamide. One of the final products, 2-(methylcarbamoyl)benzenesulfonic acid, was also detected and characterized. In positive-ion mode experiments, cations corresponding to the reactant, 2-methylbenzoisothiazol-3-one, as well as an intermediate reaction product and the two final reaction products, 2-methylbenzo[d]isothiazol-3(2H)-one 1-oxide, N-methylsaccharine, and 2-(methylcarbamoyl)benzenesulfonic acid, respectively, were detected and identified. This research substantially improved the understanding on the reaction intermediates formed during laser-induced UV/H2O2 advanced oxidation of 2-methylbenzoisothiazol-3-one, which facilitates the delineation of the reaction mechanisms occurring in these processes.

Modification of a Quadrupole/Orbitrap/Linear Quadrupole Ion Trap Tribrid Mass Spectrometer for Diagnostic Gas-Phase Ion-Molecule Reactions.

Tandem mass spectrometry based on diagnostic gas-phase ion-molecule reactions represents a robust method for functional group identification in unknown compounds. To date, most of these reactions have been studied using unit-resolution instruments, such as linear quadrupole ion traps and triple quadrupoles, which cannot be used to obtain elemental composition information for the species of interest. In this study, a high-resolution mass spectrometer, a quadrupole/orbitrap/linear quadrupole ion trap tribrid, was modified by installing a portable reagent inlet system to obtain high-resolution data for ion-molecule reactions. Examination of a previously published test system, the reaction between protonated 1,1'-sulfonyldiimizadole with 2-methoxypropene, demonstrated the ability to perform ion-molecule reactions on the modified tribrid mass spectrometer. High-resolution data were obtained for ion-molecule reactions of three isobaric ions (protonated glycylalanine, protonated glutamine, and protonated lysine) with diethylmethoxyborane. On the basis of these data, the isobaric ions can be differentiated based on both their measured accurate mass as well as the different product ions they generated upon the ion-molecule reactions. In a different experiment, analyte ions were subjected to collision-induced dissociation (CID), and the structures of the resulting fragment ions were examined via diagnostic ion-molecule reactions. This experiment allows for the functional group interrogation of fragment ions and can be used to improve the understanding of the structures of fragment ions generated in the gas phase.

A Portable Reagent Inlet System Designed to Diminish the Impact of Air and Water to Ion-Molecule Reactions Studied in a Linear Quadrupole Ion Trap.

A portable reagent inlet system for a linear quadrupole ion trap (LQIT) mass spectrometer was designed to diminish the impact of air and water on gas-phase ion-molecule reactions. Compared to the traditional reagent mixing manifolds that has been extensively used for decades, the portable system is much simpler and has fewer junctions and a smaller inner space. These changes reduce the amount of air and water introduced into the mass spectrometer with the reagent. Furthermore, unlike the traditional manifolds, the portable system can be easily attached to or detached from the LQIT mass spectrometer. Finally, the price of the portable system is only 1/10 of that of a traditional manifold as estimated in 2022. Therefore, the portable system has several advantages over the traditional reagent mixing manifolds.