RESUMO
A new layered oxyselenide, Ba2CuO2Cu2Se2, was synthesized under high-pressure and high-temperature conditions and was characterized via structural, magnetic, and transport measurements. It crystallizes into space group I4/ mmm and consists of a square lattice of [CuO2] planes and antifluorite-type [Cu2Se2] layers, which are alternately stacked along the c axis. The lattice parameters are obtained as a = b = 4.0885 Å and c = 19.6887 Å. The Cu-O bond length is given by half of the lattice constant a, i.e., 2.0443 Å. Ba2CuO2Cu2Se2 is a semiconductor with a resistivity of â¼18 mΩ·cm at room temperature. No magnetic transition was found in the measured temperature range, and the Curie-Weiss temperature was obtained as -0.2 K, suggesting a very weak exchange interaction. The DFT+ Ueff calculation demonstrates that the band gap is about 0.2 eV for the supposed antiferromagnetic order, and the density of state near the top of the valence band is mainly contributed from the Se 4p electrons.
RESUMO
The metal-organic framework {[Fe(2,2'-bipyridine)(CN)4]2Co(4,4'-bipyridine)}·4H2O (Fe2Co-MOF) with single-chain magnetism undergoes an intermetallic charge transfer that converts the Fe2Co charge/spin configurations from Fe(3+)LS-Co(2+)HS-Fe(3+)LS to Fe(2+)LS-Co(3+)LS-Fe(3+)LS (LS = low spin, HS = high spin) around 220 K under ambient pressure. A series of coherent phase transitions in structure, magnetism, permittivity and ferroelectricity are found to take place accompanying with the charge transfer, making Fe2Co-MOF a unique ferroelectric single-chain magnet at low temperature. Moreover, our detailed measurements of magnetization, dielectric constant, and Raman scattering under high pressures illustrate that the charge transfer as well as the resulting multifunctional transitions can be readily induced to occur at room temperature by applying a tiny external pressure of about 0.5 kbar. The present study thus provides a pressure well-controllable multifunctional material with potential applications in a broad temperature region across room temperature.
RESUMO
Superconductivity (SC) was experimentally observed for the first time in antimony polyhydride. The diamond anvil cell combined with a laser heating system was used to synthesize the antimony polyhydride sample at high pressure and high temperature. In-situ high pressure transport measurements as a function of temperature with an applied magnetic field were performed to study the SC properties. It was found that the antimony polyhydride samples show superconducting transition with critical temperature T c 116 K at 184 GPa. The investigation of SC at magnetic field revealed the superconducting coherent length of â¼40 Å based on the Ginzburg Landau (GL) equation. Antimony polyhydride superconductor has the second highest T c in addition to sulfur hydride among the polyhydrides of elements from main groups IIIA to VIIA in the periodic table.
RESUMO
Prevention of encrustation on the surface has always been the biggest challenge for urological implants. In the field of ureteral stent design, biodegradability has attracted much attention in recent years, because biodegradable ureteral stents not only avoid secondary intervention, but also prevent encrustation due to surface renewal by degradation process. Furthermore, researches have focus on some surface parameters to provide guidance for the development of stent materials, such as hydrophilicity or surface charge. In this work, we synthesized two types of poly(ester-carbonate)s, poly(L-lactide-co-5-amino-1,3-dioxan-2-one) (P(LA-co-AC)) containing amino, and poly (L-lactide-co-5-methyl-5-carboxyl-1,3-dioxan-2-one) (P(LA-co-MCC)) containing carboxyl. Blending P(LA-co-AC) and P(LA-co-MCC) with poly(L-lactide-co-Æ-caprolactone) (PLACL) respectively, two types of ureteral stent materials were prepared. Due to the influence of ions formed by the dissociation of amino and carboxyl, two types of materials show differences in surface charge analyses. We further developed a dynamic urinary extracorporeal circulation (DUEC) system to assess in vitro encrustation of materials with different surface charges. The results of this comparative study identified that the materials with strong negative surface charge were most favorable for use as ureteral stent, and provided a new approach to surmount the problems faced by urological surgery which complied with the future trend of biodegradable ureteral stent design.
Assuntos
Ureter , StentsRESUMO
It is challenging to search for high Tc superconductivity (SC) in transition metal elements wherein d electrons are usually not favored by conventional BCS theory. Here we report experimental discovery of surprising SC up to 310 GPa with Tc above 20 K in wide pressure range from 108 GPa to 240 GPa in titanium. The maximum Tconset above 26.2 K and zero resistance Tczero of 21 K are record high values hitherto achieved among element superconductors. The Hc2(0) is estimated to be â¼32 Tesla with coherence length 32 Å. The results show strong s-d transfer and d band dominance, indicating correlation driven contributions to high Tc SC in dense titanium. This finding is in sharp contrast to the theoretical predications based on pristine electron-phonon coupling scenario. The study opens a fresh promising avenue for rational design and discovery of high Tc superconductors among simple materials via pressure tuned unconventional mechanism.
RESUMO
Searching for superconductivity with Tc near room temperature is of great interest both for fundamental science & many potential applications. Here we report the experimental discovery of superconductivity with maximum critical temperature (Tc) above 210 K in calcium superhydrides, the new alkali earth hydrides experimentally showing superconductivity above 200 K in addition to sulfur hydride & rare-earth hydride system. The materials are synthesized at the synergetic conditions of 160~190 GPa and ~2000 K using diamond anvil cell combined with in-situ laser heating technique. The superconductivity was studied through in-situ high pressure electric conductance measurements in an applied magnetic field for the sample quenched from high temperature while maintained at high pressures. The upper critical field Hc(0) was estimated to be ~268 T while the GL coherent length is ~11 Å. The in-situ synchrotron X-ray diffraction measurements suggest that the synthesized calcium hydrides are primarily composed of CaH6 while there may also exist other calcium hydrides with different hydrogen contents.
RESUMO
Polydioxanone (PPDO) is synthesized by ring-opening polymerization of p-dioxanone, using stannous octoate as the catalyst. The polarized optical micrograph (POM) shows thes pherulite growth rate of PPDO decreases with an increase in the isothermal crystallization temperature. PPDO is compression-molded into bars, and PPDO bars are subjected to isothermal annealing at a range of temperatures (Ta = 50, 60, 70, 80, 90, and 100 °C), and correspond to three different annealing times (ta = 1h, 2h, 3h). The effect on PPDO is investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). With an increase in Ta and ta, the grain size and the degree of crystallinity also increase. Meanwhile, the tensile strength is significantly improved. The PPDO bars (90 °C, 2 h) reach the maximum crystallinity (57.21%) and the maximum tensile strength (41.1 MPa). Interestingly, the heat treatment process does not result in serious thermal degradation. It is observed that the hydrolytic degradation of the annealed PPDO is delayed to some extent. Thus, annealed PPDO might have potential applications, particularly in the fields of orthopedic fixation and tissue engineering.
RESUMO
In this work, a novel compound Ba9V3Se15 with one-dimensional (1D) spin chains was synthesized under high-pressure and high-temperature conditions. It was systematically characterized via structural, magnetic, thermodynamic and transport measurements. Ba9V3Se15 crystallizes into a hexagonal structure with a space group of P-6c2 (188) and the lattice constants of a = b = 9.5745(7) Å and c = 18.7814(4) Å. The crystal structure consists of face-sharing octahedral VSe6 chains along c axis, which are trimeric and arranged in a triangular lattice in ab-plane. Ba9V3Se15 is a semiconductor and undergoes complex magnetic transitions. In the zero-field-cooled (ZFC) process with magnetic field of 10 Oe, Ba9V3Se15 sequentially undergoes ferrimagnetic and spin cluster glass transition at 2.5 K and 3.3 K, respectively. When the magnetic field exceeds 50 Oe, only the ferrimagnetic transition can be observed. Above the transition temperature, the specific heat contains a significant magnetic contribution that is proportional to T 1/2. The calculation suggests that the nearest neighbor (NN) intra-chain antiferromagnetic exchange J 1 is much larger than the next nearest neighbor (NNN) intra-chain ferromagnetic exchange J 2. Therefore, Ba9V3Se15 can be regarded as an effective ferromagnetic chains with effective spin-1/2 by the formation of the V(2)(↓) V(1)(↑) V(2)(↓) cluster.