Intermittency properties in a temporal lobe epilepsy model.

Neuronal synchronization is important for communication between brain regions and plays a key role in learning. However, changes in connectivity can lead to hyper-synchronized states related to epileptic seizures that occur intermittently with asynchronous states. The activity-regulated cytoskeleton-associated protein (ARC) is related to synaptic alterations which can lead to epilepsy. Induction of status epilepticus in rodent models causes the appearance of intense ARC immunoreactive neurons (IAINs), which present a higher number of connections and conductance intensity than non-IAINs. This alteration might contribute to abnormal epileptic seizure activity. In this work, we investigated how IAINs connectivity influences the firing pattern and synchronization in neural networks. Firstly, we showed the appearance of synchronized burst patterns due to the emergence of IAINs. Second, we described how the increase of IAINs connectivity favors the appearance of intermittent up and down activities associated with synchronous bursts and asynchronous spikes, respectively. Once the intermittent activity was properly characterized, we applied the optogenetics control of the high synchronous activities in the intermittent regime. To do this, we considered that 1% of neurons were transfected and became photosensitive. We observed that optogenetics methods to control synchronized burst patterns are effective when IAINs are chosen as photosensitive, but not effective in non-IAINs. Therefore, our analyses suggest that IAINs play a pivotal role in both the generation and suppression of highly synchronized activities.

Two step calibration method for ozone low-cost sensor: Field experiences with the UrbanSense DCUs.

Urban air pollution is a global concern impairing citizens' health, thus monitoring is a pressing need for city managers. City-wide networks for air pollution monitoring based on low-cost sensors are promising to provide real-time data with detail and scale never before possible. However, they still present limitations preventing their ubiquitous use. Thus, this study aimed to perform a post-deployment validation and calibration based on two step methods for ozone low-cost sensor of a city-wide network for air pollution and meteorology monitoring using low-cost sensors focusing on the main challenges. Four of the 23 data collection units (DCUs) of the UrbanSense network installed in Porto city (Portugal) with low-cost sensors for particulate matter (PM), carbon monoxide (CO), ozone (O3), and meteorological variables (temperature, relative humidity, luminosity, precipitation, and wind speed and direction) were evaluated. This study identified post-deployment challenges related to their validation and calibration. The preliminary validation showed that PM, CO and precipitation sensors recorded only unreliable data, and other sensors (wind speed and direction) very few data. A multi-step calibration strategy was implemented: inter-DCU calibration (1st step, for O3, temperature and relative humidity) and calibration with a reference-grade instrument (2nd step, for O3). In the 1st step, multivariate linear regression (MLR) resulted in models with better performance than non-linear models such as artificial neural networks (errors almost zero and R2 > 0.80). In the 2nd step, the calibration models using non-linear machine learning boosting algorithms, namely Stochastic Gradient Boosting Regressor (both with the default and post-tuning hyper-parameters), performed better than artificial neural networks and linear regression approaches. The calibrated O3 data resulted in a marginal improvement from the raw data, with error values close to zero, with low predictability (R2 ∼ 0.32). The lessons learned with the present study evidenced the need to redesign the calibration strategy. Thus, a novel multi-step calibration strategy is proposed, based on two steps (pre and post-deployment calibration). When performed cyclically and continuously, this strategy reduces the need for reference instruments, while probably minimising data drifts over time. More experimental campaigns are needed to collect more data and further improve calibration models.

Effect of growth rates on hormonal and pubertal status in Nellore heifers early weaned.

This study aimed to determine the effect of growth rates on the hormonal status and puberty onset. Forty-eight Nellore heifers were weaned at 3.0 ± 0.1 (means ± standard error of the mean) months old were blocked according to body weight at weaning (84 ± 2 kg) and randomly assigned to treatments. The treatments were arranged in 2 × 2 factorial according to the feeding program. The first program was high (H; 0.79 kg/day) or control (C; 0.45 kg/day) average daily gain (ADG) from 3rd to 7th month of age (growing phase I). The second program was also high (H; 0.70 kg/day) or control (C; 0.50 kg/day) ADG from the 7th month until puberty (growing phase II), resulting in four treatments: HH (n = 13), HC (n = 10), CH (n = 13), and CC (n = 12). To achieve desired gains, heifers in high ADG program were fed ad libitum dry matter intake (DMI), and the control group was offered around 50% of ad libitum DMI of high group. All heifers received a diet with similar composition. Puberty was assessed weekly by ultrasound examination, and the largest follicle diameter was evaluated every month. Blood samples were collected to quantify leptin, insulin growth factor-1 (IGF1) and luteinizing hormone (LH). At 7 months of age, heifers in high ADG were 35 kg heavier than the control. Heifers in the HH had greater DMI compared with CH in phase II. The puberty rate at 19 months old was greater in the HH treatment (84%) than in the CC (23%), but there was no difference between HC (60%) and CH (50%) treatments. Heifers from HH treatment had greater serum leptin concentration than others at 13 months old, and serum leptin was greater in HH compared with CH and CC at 18 months old. High heifers in phase I had greater serum IGF1 concentration than the control. In addition, HH heifers had a greater diameter of the largest follicle than CC. There was no interaction between phases and age in any variable relative to the LH profile. However, the heifers' age was the main factor that increased the frequency of LH pulse. In conclusion, increasing ADG was associated with greater ADG, serum leptin and IGF-1 concentration, and puberty onset; however, LH concentration was affected mainly by age of the animal. The increasing growth rate at younger age made heifers more efficient.

Quantifying indoor air quality determinants in urban and rural nursery and primary schools.

Poor indoor air quality can adversely affect children's health, comfort and school performance, but existing literature on quantifying indoor air pollutants (IAP) determinants' in nursery and primary schools is limited. Following previous studies, this study mainly aimed to quantify determinants of selected IAP, in nursery and primary schools from both urban and rural sites, accounting for seasonal variations. In 101 indoor microenvironments (classrooms, bedrooms and canteens) from 25 nursery and primary schools, CO2, CO, HCOH, NO2, O3, total volatile organic compounds, PM1, PM2.5, PM10, total suspended particles (TSP), and meteorological/comfort parameters were continuously sampled (occupancy and background levels), from at least 24 h to 9 consecutive days (not simultaneously) in each studied room; in some cases weekend was also considered. Children faced thermal discomfort and inadequate humidity, respectively in 60.1% and 44.1% of the studied classrooms. They were also exposed to high levels of IAP, namely PM2.5 and CO2 respectively in 69.0% and 41.3% of the studied classrooms, mostly in urban sites, depending on season and on occupancy and activity patterns (different amongst age groups). As PM2.5 and CO2 were the major concerning IAP, multivariate linear regression models were built to quantify (explained variability and relative importance) their main determinants, in both occupancy and non-occupancy (background) periods. Models for occupancy periods showed higher explained variability (R2 = 0.64, 0.57 and 0.47, respectively, for CO2, PM2.5 and PM10) than for non-occupancy. Besides background concentrations (43.5% of relative importance), relative humidity (21.1%), flooring material (17.0%), heating (6.7%) and age group of the occupants (5.3%), adjusted for season of sampling (6.4%) were predictors in CO2 occupancy model. In the cases of PM2.5 and PM10 occupancy concentrations, besides background concentrations (71.2% and 67.2% of relative importance, respectively for PM2.5 and PM10), type of school management (8.8% and 15.2%) and flooring material (13.9% and 13.9%), adjusted for season of sampling (6.1% and 3.8%), were the main predictors. These findings support the need of mitigation measures to reduce IAP levels, and prevention actions to avoid children's exposure. Reducing the time spent indoors in the same microenvironment by doing more and/or longer breaks, improving ventilation and cleaning actions, and avoiding or making a better maintenance hardwood flooring materials, chalkboard use and VOC emitting materials, are practices that should be implemented and their impacts quantified.

The effect of length of storage and sodium benzoate on the nutritive value of reconstituted sorghum grain silages for dairy cows.

Twenty Holstein cows at 168 ± 87 d in milk (mean ± SD) were assigned to a 4 × 4 Latin square design with a 2 × 2 factorial arrangement to evaluate the effects of 2 storage lengths (30 or 90 d) and the presence of sodium benzoate (control or 0.2% as fed) on the nutritive value of reconstituted sorghum grain silages (RSGS). For each treatment, dry ground sorghum grain was rehydrated to 35% moisture and ensiled in 200-L plastic drums. The treatments were RSGS stored for 30 d without sodium benzoate (30 CON), RSGS stored for 30 d with sodium benzoate (30 BEN), RSGS stored for 90 d without sodium benzoate (90 CON) and RSGS stored for 90 d with sodium benzoate (90 BEN). Diets contained 16.3% RSGS. Silages stored for 90 d had higher concentrations of 1,2-propanediol, soluble protein, and ammonia nitrogen than did those stored for 30 d. Sodium benzoate reduced ethanol and ethyl-ester formation. Silages stored for 90 d had higher starch (89.3 vs. 86.9%) and protein (57.1 vs. 54.0%) digestibility compared with silages stored for 30 d. The ruminal acetate-to-propionate ratio tended to be lower in RSGS stored for 90 d than in RSGS stored for 30 d (3.75 vs. 3.34). Milk yield increased from 30.0 kg/d in cows fed RSGS stored for 30 d to 31.2 kg/d in cows fed RSGS stored for 90 d, without a change in dry matter intake (23.5 kg/d on average). Hence, feed efficiency and milk N efficiency also had tendencies to increase in cows fed RSGS stored for 90 d. Sodium benzoate did not alter cow performance but slightly increased plasma glucose (65.2 vs. 63.6 mg/dL). In conclusion, increasing the storage period of RSGS from 30 to 90 d improved starch and protein digestibility, milk yield, and feed efficiency.

Inhibitory Effect of 5-Aminoimidazole-4-Carbohydrazonamides Derivatives Against Candida spp. Biofilm on Nanohydroxyapatite Substrate.

Candida can adhere and form biofilm on biomaterials commonly used in medical devices which is a key attribute that enhances its ability to cause infections in humans. Furthermore, biomaterial-related infections represent a major therapeutic challenge since Candida biofilms are implicated in antifungal therapies failure. The goals of the present work were to investigate the effect of three 5-aminoimidazole-4-carbohydrazonamides, namely (Z)-5-amino-1-methyl-N'-aryl-1H-imidazole-4-carbohydrazonamides [aryl = phenyl (1a), 4-fluorophenyl (1b), 3-fluorophenyl (1c)], on Candida albicans and Candida krusei biofilm on nanohydroxyapatite substrate, a well-known bioactive ceramic material. To address these goals, both quantitative methods (by cultivable cell numbers) and qualitative evaluation (by scanning electron microscopy) were used. Compounds cytocompatibility towards osteoblast-like cells was also evaluated after 24 h of exposure, through resazurin assay. The three tested compounds displayed a strong inhibitory effect on biofilm development of both Candida species as potent in vitro activity against C. albicans sessile cells. Regarding cytocompatibility, a concentration-dependent effect was observed. Together, these findings indicated that the potent activity of imidazole derivatives on Candida spp. biofilms on nanohydroxyapatite substrate, in particular compound 1c, is worth further investigating.

Environmental and social valuation of shipping emissions on four ports of Portugal.

Maritime sector is expected to continue growing significantly in line with world trade, however its impacts on environmental, social and human health are not yet fully known. Thus, this study aimed to estimate the external costs of in-port shipping emissions (NOx, SO2, CO2, VOCs and PM2.5) and accomplish a comprehensive eco-efficiency evaluation of four ports in Portugal (Leixões, Setúbal, Sines and Viana do Castelo) during 2013. External costs were based on the external cost factors from BeTa, CAFE and NEEDS projects and from Song (2014). Eco-efficiency evaluation was based on environmental, social and economic criteria. Results showed higher externalities for Sines and Setúbal (2.0E+02 million €), followed by Leixões (1.8E+02 million €), and Viana do Castelo (6.3 million €). NOx, SO2, and PM2.5 were the pollutants with the highest externalities. Sines port showed the best overall eco-efficiency. Although Setúbal port showed higher performance than Viana do Castelo port based on the economic data, when social and environmental aspects were considered the results changed. This shows the importance of performing a more comprehensive analysis using social and environmental indicators. The combination of all these indicators is highly important to support the implementation of policies for the abatement of shipping in-port emissions.

Antibacterial activity and biocompatibility of three-dimensional nanostructured porous granules of hydroxyapatite and zinc oxide nanoparticles--an in vitro and in vivo study.

Ceramic scaffolds are widely studied in the bone tissue engineering field due to their potential in regenerative medicine. However, adhesion of microorganisms on biomaterials with subsequent formation of antibiotic-resistant biofilms is a critical factor in implant-related infections. Therefore, new strategies are needed to address this problem. In the present study, three-dimensional and interconnected porous granules of nanostructured hydroxyapatite (nanoHA) incorporated with different amounts of zinc oxide (ZnO) nanoparticles were produced using a simple polymer sponge replication method. As in vitro experiments, granules were exposed to Staphylococcus aureus and Staphylococcus epidermidis and, after 24 h, the planktonic and sessile populations were assessed. Cytocompatibility towards osteoblast-like cells (MG63 cell line) was also evaluated for a period of 1 and 3 days, through resazurin assay and imaging flow cytometry analysis. As in vivo experiments, nanoHA porous granules with and without ZnO nanoparticles were implanted into the subcutaneous tissue in rats and their inflammatory response after 3, 7 and 30 days was examined, as well as their antibacterial activity after 1 and 3 days of S. aureus inoculation. The developed composites proved to be especially effective at reducing bacterial activity in vitro and in vivo for a weight percentage of 2% ZnO, with a low cell growth inhibition in vitro and no differences in the connective tissue growth and inflammatory response in vivo. Altogether, these results suggest that nanoHA-ZnO porous granules have a great potential to be used in orthopaedic and dental applications as a template for bone regeneration and, simultaneously, to restrain biomaterial-associated infections.

Children's exposure to indoor air in urban nurseries-part I: CO2 and comfort assessment.

Indoor air quality (IAQ) in nurseries is an emerging case-study. Thus, this study, as the Part I of the larger study "Children's exposure to indoor air in urban nurseries", aimed to: i) evaluate nurseries' indoor concentrations of carbon dioxide (CO2), a global IAQ indicator, in class and lunch rooms; ii) assess indoor comfort parameters-temperature (T) and relative humidity (RH); and iii) analyse them according to guidelines and references for IAQ, comfort and children's health. Indoor continuous measurements were performed. Non-compliances with guidelines were found in comfort parameters, which could cause discomfort situations and also microbial proliferation. Exceedances in CO2 concentrations were also found and they were caused by poor ventilation and high classroom occupation. More efficient ventilation and control of comfort parameters, as well as to reduce occupation by reviewing Portuguese legislation on that matter, would certainly improve IAQ and comfort in nurseries and consequently safeguard children's health.

Children's exposure to indoor air in urban nurseries--Part II: Gaseous pollutants' assessment.

This study, Part II of the larger study "Children's exposure to indoor air in urban nurseries", aimed to: (i) evaluate nursery schools' indoor concentrations of several air pollutants in class and lunch rooms; and (ii) analyse them according to guidelines and references. Indoor continuous measurements were performed, and outdoor concentrations were obtained to determine indoor/outdoor ratios. The influence of outdoor air seemed to be determinant on carbon monoxide (CO), nitrogen dioxide (NO2) and ozone (O3) indoor concentrations. The peak concentrations of formaldehyde and volatile organic compounds (VOC) registered (highest concentrations of 204 and 2320 µg m(-3) respectively), indicated the presence of specific indoor sources of these pollutants, namely materials emitting formaldehyde and products emitting VOC associated to cleaning and children's specific activities (like paints and glues). For formaldehyde, baseline constant concentrations along the day were also found in some of the studied rooms, which enhances the importance of detailing the study of children's short and long-term exposure to this indoor air pollutant. While CO, NO2 and O3 never exceeded the national and international reference values for IAQ and health protection, exceedances were found for formaldehyde and VOC. For this reason, a health risk assessment approach could be interesting for future research to assess children's health risks of exposure to formaldehyde and to VOC concentrations in nursery schools. Changing cleaning schedules and materials emitting formaldehyde, and more efficient ventilation while using products emitting VOC, with the correct amount and distribution of fresh air, would decrease children's exposure.

Radon Levels in Nurseries and Primary Schools in Bragança District-Preliminary Assessment.

Lung cancer has been associated with radon concentration even at low levels such as those found in dwellings. This study aimed to (i) determine radon diurnal variations in three nurseries and one primary school in the Bragança district (north of Portugal) and (ii) compare radon concentrations with legislated standards and assess the legislated procedures. Radon was measured in three nurseries and a primary school in a rural area with nongranite soil. Measurements were performed continuously to examine differences between occupation and nonoccupation periods. Indoor temperature and relative humidity were also measured continuously. A great variability was found in radon concentrations between the microenvironments examined. Radon concentrations surpassed by severalfold the recommended guidelines and thresholds, and excessive levels of health concern were sporadically found (361.5-753.5 Bq m(-3)). Thus, it is of importance to perform a national campaign on radon measurements and to reduce exposure.

A Review of New Technologies that may Become Useful for in vitro Production of Boar Sperm.

Making sperm cells outside the original testicular environment in a culture dish has been considered for a long time as impossible due to the very complicated process of spermatogenesis and sperm maturation, which altogether, encompasses a 2-month period. However, new approaches in complex three-dimensional co-cell cultures, micro-perfusion and micro-fluidics technologies, new knowledge in the functioning, culturing and differentiation of spermatogonial stem cells (SSC) and their precursor cells have revolutionized this field. Furthermore, the use of better molecular markers as well as stimulatory factors has led to successful in vitro culture of stem cells either derived from germ line stem cells, from induced pluripotent stem cells (iPSC) or from embryonic stem cells (ESC). These stem cells when placed into small seminiferous tubule fragments are able to become SSC. The SSC beyond self-renewal can also be induced into haploid sperm-like cells under in vitro conditions. In mouse, this in vitro produced sperm can be injected into a mature oocyte and allow post-fertilization development into an early embryo in vitro. After transferring such obtained embryos into the uterus of a recipient mouse, they can further develop into healthy offspring. Recently, a similar approach has been performed with combining selected cells from testicular cell suspensions followed by a complete in vitro culture of seminiferous cords producing sperm-like cells. However, most of the techniques developed are laborious, time-consuming and have low efficiency, placing questionable that it will become useful used for setting up an efficient in vitro sperm production system for the boar. The benefits and drawbacks as well as the likeliness of in vitro pig sperm production to become applied in assisted technologies for swine reproduction are critically discussed. In this contribution, also the process of sperm production in the testis and sperm maturation is reviewed.

HPV infection-associated anogenital cyto-colpo-histological findings and molecular typing in HIV-positive women.

HIV and human papillomavirus (HPV) coinfection is increasing, especially in the anal canal (AC) and cervico-vaginal regions. We identified anal epithelium abnormalities related to high-risk HPV (HR-HPV) lesions in the lower genital tracts (LGTs) of HIV-positive women, described the HPV genotypes identified, and assessed the expression of E6/E7 oncogenes in coinfected patients. Ninety-eight women were enrolled in groups combining HIV status and presence or absence of HPV in the LGT. Anal and cervical smears were collected for cytology and HR-HPV assays using Cobas(®) and/or PapilloCheck(®). Samples with highly oncogenic HPV genotypes were confirmed by NucliSENS EasyQ(®). Forty-two HIV-positive (25-52; mean age 39.5) and 56 HIV-negative (18-58; mean age 35.7) patients were included. E2 and C1 groups presented AC alterations (P = 0.002); altered images for high-resolution anoscopy were higher in E1 and C2 (P < 0.001). Of the 29 women with alterations, 41.38% were HIV-negative and 58.62% were HIV-positive (P < 0.001). HIV-positive patients accounted for 29% of the anal high-grade squamous intraepithelial lesions (P = 0.015). The Cobas(®) positive result frequency was higher in three AC groups than in the other groups. There was variation in the number of HPV types in the cervico-vaginal samples among the study groups (P < 0.001). Anal cytology and anoscopy showed more altered findings in HIV-positive patients with HPV in the LGT. HR-HPV anal infections by various genotypes are common and are associated with cervical infections in HIV-positive patients. E6/E7 expression is apparently more common in the AC of HIV-positive women.

Historical epidemiology of hepatitis C virus (HCV) in selected countries.

Chronic infection with hepatitis C virus (HCV) is a leading indicator for liver disease. New treatment options are becoming available, and there is a need to characterize the epidemiology and disease burden of HCV. Data for prevalence, viremia, genotype, diagnosis and treatment were obtained through literature searches and expert consensus for 16 countries. For some countries, data from centralized registries were used to estimate diagnosis and treatment rates. Data for the number of liver transplants and the proportion attributable to HCV were obtained from centralized databases. Viremic prevalence estimates varied widely between countries, ranging from 0.3% in Austria, England and Germany to 8.5% in Egypt. The largest viremic populations were in Egypt, with 6,358,000 cases in 2008 and Brazil with 2,106,000 cases in 2007. The age distribution of cases differed between countries. In most countries, prevalence rates were higher among males, reflecting higher rates of injection drug use. Diagnosis, treatment and transplant levels also differed considerably between countries. Reliable estimates characterizing HCV-infected populations are critical for addressing HCV-related morbidity and mortality. There is a need to quantify the burden of chronic HCV infection at the national level.

Strategies to manage hepatitis C virus (HCV) disease burden.

The number of hepatitis C virus (HCV) infections is projected to decline while those with advanced liver disease will increase. A modeling approach was used to forecast two treatment scenarios: (i) the impact of increased treatment efficacy while keeping the number of treated patients constant and (ii) increasing efficacy and treatment rate. This analysis suggests that successful diagnosis and treatment of a small proportion of patients can contribute significantly to the reduction of disease burden in the countries studied. The largest reduction in HCV-related morbidity and mortality occurs when increased treatment is combined with higher efficacy therapies, generally in combination with increased diagnosis. With a treatment rate of approximately 10%, this analysis suggests it is possible to achieve elimination of HCV (defined as a >90% decline in total infections by 2030). However, for most countries presented, this will require a 3-5 fold increase in diagnosis and/or treatment. Thus, building the public health and clinical provider capacity for improved diagnosis and treatment will be critical.

The present and future disease burden of hepatitis C virus (HCV) infection with today's treatment paradigm.

The disease burden of hepatitis C virus (HCV) is expected to increase as the infected population ages. A modelling approach was used to estimate the total number of viremic infections, diagnosed, treated and new infections in 2013. In addition, the model was used to estimate the change in the total number of HCV infections, the disease progression and mortality in 2013-2030. Finally, expert panel consensus was used to capture current treatment practices in each country. Using today's treatment paradigm, the total number of HCV infections is projected to decline or remain flat in all countries studied. However, in the same time period, the number of individuals with late-stage liver disease is projected to increase. This study concluded that the current treatment rate and efficacy are not sufficient to manage the disease burden of HCV. Thus, alternative strategies are required to keep the number of HCV individuals with advanced liver disease and liver-related deaths from increasing.

The microenvironmental modelling approach to assess children's exposure to air pollution - A review.

Exposures to a wide spectrum of air pollutants were associated to several effects on children's health. Exposure assessment can be used to establish where and how air pollutants' exposures occur. However, a realistic estimation of children's exposures to air pollution is usually a great ethics challenge, especially for young children, because they cannot intentionally be exposed to contaminants and according to Helsinki declaration, they are not old enough to make a decision on their participation. Additionally, using adult surrogates introduces bias, since time-space-activity patterns are different from those of children. From all the different available approaches for exposure assessment, the microenvironmental (ME) modelling (indirect approach, where personal exposures are estimated or predicted from microenvironment measurements combined with time-activity data) seemed to be the best to assess children's exposure to air pollution as it takes into account the varying levels of pollution to which an individual is exposed during the course of the day, it is faster and less expensive. Thus, this review aimed to explore the use of the ME modelling approach methodology to assess children's exposure to air pollution. To meet this goal, a total of 152 articles, published since 2002, were identified and titles and abstracts were scanned for relevance. After exclusions, 26 articles were fully reviewed and main characteristics were detailed, namely: (i) study design and outcomes, including location, study population, calendar time, pollutants analysed and purpose; and (ii) data collection, including time-activity patterns (methods of collection, record time and key elements) and pollution measurements (microenvironments, methods of collection and duration and time resolution). The reviewed studies were from different parts of the world, confirming the worldwide application, and mostly cross-sectional. Longitudinal studies were also found enhancing the applicability of this approach. The application of this methodology on children is different from that on adults because of data collection, namely the methods used for collecting time-activity patterns must be different and the time-activity patterns are itself different, which leads to select different microenvironments to the data collection of pollutants' concentrations. The most used methods to gather information on time-activity patterns were questionnaires and diaries, and the main microenvironments considered were home and school (indoors and outdoors). Although the ME modelling approach in studies to assess children's exposure to air pollution is highly encouraged, a validation process is needed, due to the uncertainties associated with the application of this approach.

Mechanical properties of native and decellularized reproductive tissues: insights for tissue engineering strategies.

Understanding the mechanical properties and porosity of reproductive tissues is vital for regenerative medicine and tissue engineering. This study investigated the changes in Young's modulus (YM), storage modulus (E'), loss modulus (E"), and porosity of native and decellularized bovine reproductive tissues during the estrous cycle. Testis tunica albuginea had significantly higher YM, E', and E" than the inner testis, indicating greater stiffness and viscoelasticity. Endometrium showed no distinct differences in YM, E', or E" across the estrous cycle or between horns. Ovaries exhibited significant variations in YM, E', E", and porosity, with higher YM and E' in the ipsilateral cortex and medulla during the luteal phase. Decellularized ovarian tissues displayed increased porosity. The oviduct displayed no significant differences in YM or E' in the isthmus, but the contralateral ampulla had reduced YM and E' in the luteal phase. These findings offer valuable insights into the dynamic mechanical properties and porosity of reproductive tissues, facilitating the development of biomimetic scaffolds for tissue engineering applications.

Biological evaluation of alginate-based hydrogels, with antimicrobial features by Ce(III) incorporation, as vehicles for a bone substitute.

A novel hydrogel, based on an alginate/hyaluronate mixture and Ce(III) ions, with effective bioactive and antimicrobial ability was developed to be used as vehicle of a synthetic bone substitute producing an injectable substitute (IBS). Firstly, three different IBSs were prepared using three developed alginate-based hydrogels, the hydrogel Alg composed by alginate, the hydrogel Alg/Ch composed by an alginate/chitosan mixture and the hydrogel Alg/HA composed by an alginate/hyaluronate mixture. MG63 cells viability on the IBSs was evaluated, being observed a significantly higher cell viability on the Alg/HA_IBS at all time points, which indicates a better cell adaptation to the material, increasing their predisposition to produce extracellular matrix and thus allowing a better bone regeneration. Moreover, SEM analysis showed evident filopodia and a spreader shape of MG63 cells when seeded on Alg/HA_IBS. This way, based upon the in vitro results, the hydrogel Alg/HA was chosen to the in vivo study by subcutaneous implantation in an animal model, promoting a slight irritating tissue response and visible tissue repairing. The next step was to grant antimicrobial properties to the hydrogel that showed the best biological behavior by incorporation of Ce(III) ions into the Alg/HA, producing the hydrogel Alg/HA2. The antimicrobial activity of these hyaluronate-based hydrogels was evaluated against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and Candida albicans. Results showed that Ce(III) ions can significantly enhance the hydrogel antimicrobial ability without compromising the osteoconductivity improvement promoted by the vehicle association to the synthetic bone substitute.

Far from urban areas: plastic uptake in fish populations of subtropical headwater streams.

This study investigated the occurrence of plastic particles in the digestive tracts of fish from headwater streams in a human-thinly populated region of the subtropical Sinos River basin in southern Brazil. In total, 258 individuals from 17 species were collected using electric fishing. Thirty-eight percent (38%) of the specimens contained plastic particles. All of them were fibers, with a maximum count of 43 per individual. Plastic fibers were the fourth most abundant food category. Results showed that the uptake of these plastic particles was proportional to the number of ingested food items. Fiber counts in the guts correlated with the uptake of Trichoptera, which are invertebrates using plastic particles to construct their protective cases. No significant difference in plastic uptake was detected between benthic and water column fish. No evidence of bioaccumulation of plastic particles was found in the intestines. The distance from urban areas was not related to the number of ingested plastic particles, concluding that plastics are ubiquitous and available to biota, even in remote locations. The most probable source of these particles is residences close to the streams which discharge the sewage of washing machines without any treatment.