RESUMO
The rapid emergence of antibiotic resistance is becoming an imminent problem in bone tissue engineering, and therefore biomaterials must be modified to promote the tissue integration before bacterial adhesion. In this work, silk fibroin/nanohydroxyapatite hydrogel was modified with in situ synthesized silver and gold nanoparticles (AgNPs and AuNPs), taking advantage of the tyrosine amino acid. The presence of AgNPs and AuNPs in the hydrogels was characterized by UV spectrophotometer, transmission electron microscopy and thermogravimetric analysis. In vitro antimicrobial studies revealed that hydrogels with AgNPs and AuNPs exhibited significant inhibition ability against both gram-positive and gram-negative bacteria. Cytocompatibility studies carried out using osteoblastic cells revealed that up to 0.5 wt% of AgNPs, and for all concentrations of AuNPs, the hydrogels can be effectively used as antimicrobial materials, without compromising cell behavior. On the basis of the aforementioned observations, these hydrogels are very attractive for bone tissue engineering.
Assuntos
Antibacterianos/farmacologia , Regeneração Óssea , Durapatita/química , Fibroínas/química , Hidrogéis/química , Nanopartículas Metálicas/química , Linhagem Celular , Ouro , Humanos , Testes de Sensibilidade Microbiana , Osteoblastos/efeitos dos fármacos , Prata , Engenharia TecidualRESUMO
Miscibility is an important issue in biopolymer blends for analysis of the behavior of polymer pairs through the detection of phase separation and improvement of the mechanical and physical properties of the blend. This study presents the formulation of a stable and one-phase mixture of collagen and regenerated silk fibroin (RSF), with the highest miscibility ratio between these two macromolecules, through inducing electrostatic interactions, using salt ions. For this aim, a ternary phase diagram was experimentally built for the mixtures, based on observations of phase behavior of blend solutions with various ratios. The miscibility behavior of the blend solutions in the miscible zones of the phase diagram was confirmed quantitatively by viscosimetric measurements. Assessing the effects of biopolymer mixing ratio and salt ions, before and after dialysis of blend solutions, revealed the importance of ion-specific interactions in the formation of coacervate-based materials containing collagen and RSF blends that can be used in pharmaceutical, drug delivery, and biomedical applications. Moreover, the conformational change of silk fibroin from random coil to beta sheet, in solution and in the final solid films, was detected by circular dichroism (CD) and Fourier transform infrared spectroscopy (FTIR), respectively. Scanning electron microscopy (SEM) exhibited alterations of surface morphology for the biocomposite films with different ratios. Surface contact angle measurement illustrated different hydrophobic properties for the blended film surfaces. Differential scanning calorimetry (DSC) showed that the formation of the beta sheet structure of silk fibroin enhances the thermal stability of the final blend films. Therefore, the novel method presented in this study resulted in the formation of biocomposite films whose physico-chemical properties can be tuned by silk fibroin conformational changes by applying different component mixing ratios.
Assuntos
Biopolímeros/química , Colágeno/química , Fibroínas/química , Seda/química , Animais , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Biopolímeros/biossíntese , Bombyx/química , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Orthopaedic implant-associated infections are a devastating complication of orthopaedic surgery with a significant impact on patients and healthcare systems. The aims of this work were to describe the patterns of antimicrobial resistance, pathogenicity and virulence of clinical bacterial isolates from orthopaedic implant-associated infections and to further isolate and characterise bacteriophages that are efficient in controlling these bacteria. Staphylococcus aureus, Enterococcus faecalis and Escherichia coli isolated from orthopaedic infections showed multiresistance patterns to the most frequently used antibiotics in clinical settings. The presence of mobile genetic elements (mecA, Tn916/Tn1545 and intl1) and virulence determinants (icaB, cna, hlb, cylLs, cylM, agg, gelE, fsr and fimA) highlighted the pathogenicity of these isolates. Moreover, the isolates belonged to clonal complexes associated with the acquisition of pathogenicity islands and antimicrobial resistance genes by recombination and horizontal gene transfer. Bacteriophages vB_SauM_LM12, vB_EfaS_LM99 and vB_EcoM_JB75 were characterised and their ability to infect clinical isolates of S. aureus, E. faecalis and E. coli, respectively, was assessed. Morphological and genomic analyses revealed that vB_EfaS_LM99 and vB_EcoM_JB75 belong to the Siphoviridae and Myoviridae families, respectively, and no genes associated with lysogeny were found. The bacteriophages showed low latent periods, high burst sizes, broad host ranges and tolerance to several environmental conditions. Moreover, they showed high efficiency and specificity to infect and reduce clinical bacteria, including methicillin-resistant S. aureus and vancomycin-resistant enterococci. Therefore, the results obtained suggest that the bacteriophages used in this work are a promising approach to control these pathogens involved in orthopaedic implant-associated infections.
Assuntos
Bacteriólise , Bacteriófagos/isolamento & purificação , Infecções por Escherichia coli/terapia , Infecções por Bactérias Gram-Positivas/terapia , Terapia por Fagos/métodos , Infecções Relacionadas à Prótese/terapia , Adulto , Idoso , Idoso de 80 Anos ou mais , Bacteriófagos/crescimento & desenvolvimento , Farmacorresistência Bacteriana Múltipla , Enterococcus faecalis/efeitos dos fármacos , Enterococcus faecalis/isolamento & purificação , Enterococcus faecalis/patogenicidade , Enterococcus faecalis/virologia , Escherichia coli/efeitos dos fármacos , Escherichia coli/isolamento & purificação , Escherichia coli/patogenicidade , Escherichia coli/virologia , Feminino , Infecções por Bactérias Gram-Positivas/microbiologia , Humanos , Masculino , Pessoa de Meia-Idade , Procedimentos Ortopédicos/efeitos adversos , Infecções Relacionadas à Prótese/microbiologia , Staphylococcus aureus/efeitos dos fármacos , Staphylococcus aureus/isolamento & purificação , Staphylococcus aureus/patogenicidade , Staphylococcus aureus/virologiaRESUMO
Silk fibroin (SF) is a natural, biocompatible, and biodegradable polymer having a great potential for the successful regeneration of damaged bone tissue. In the present work, nanohydroxyapatite (nanoHA) was incorporated into SF polymer to form a bioactive composite hydrogel for applications as bone implants. The degradation and bioactive properties of SF/nanoHA composite hydrogels were evaluated. Additionally, biological investigations of human bone marrow stromal cells (hBMSCs) viability, proliferation and differentiation to the osteoblastic phenotype were conducted. The incorporation of nanoHA in SF polymer matrices improved the bioactivity of the hydrogels. The biological results highlighted that the SF/nanoHA composite hydrogels are suitable for hBMSCs attachment and proliferation, while a test for alkaline phosphatase (ALP) and bone morphogenetic protein 2 (BMP-2) expression suggested osteoblast differentiation. Additionally, a cell staining method for ALP allowed to observe cell infiltration with active production of ALP by the infiltrated cells, paving the way to use the proposed composite hydrogel for bone tissue regeneration.
Assuntos
Materiais Biocompatíveis/química , Fibroínas/química , Hidrogéis/química , Hidroxiapatitas/química , Fosfatase Alcalina/metabolismo , Materiais Biocompatíveis/farmacologia , Células da Medula Óssea/citologia , Proteína Morfogenética Óssea 2/metabolismo , Diferenciação Celular/efeitos dos fármacos , Células Cultivadas , Humanos , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/efeitos dos fármacos , Células-Tronco Mesenquimais/metabolismo , Microscopia Confocal , Microscopia Eletrônica de Varredura , Nanoestruturas/química , Osteogênese/efeitos dos fármacosRESUMO
Implant-associated infections are caused by surface-adhering microorganisms persisting as biofilms, resistant to host defense and antimicrobial agents. Given the limited efficacy of traditional antibiotics, novel strategies may rely on the prevention of such infections through the design of new biomaterials. In this work, two antimicrobial agents applied to nanohydroxyapatite materials-namely, chlorhexidine digluconate (CHX) and zinc oxide (ZnO) nanoparticles-were compared concerning their ability to avoid single- or dual-species biofilms of Staphylococcus aureus and Escherichia coli. The resulting biofilms were quantified by the enumeration of colony-forming units and examined by confocal microscopy using both Live/Dead staining and bacterial-specific fluorescent in situ hybridization. The sessile population arrangement was also observed by scanning electron microscopy. Both biomaterials showed to be effective in impairing bacterial adhesion and proliferation for either single- or dual-species biofilms. Furthermore, a competitive interaction was observed for dual-species biofilms wherein E. coli exhibited higher proliferative capacity than S. aureus, an inverse behavior from the one observed in single-species biofilms. Therefore, either nanoHA-CHX or nanoHA-ZnO surfaces appear as promising alternatives to antibiotics for the prevention of devices-related infections avoiding the critical risk of antibiotic-resistant strains emergence. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 491-497, 2017.
Assuntos
Biofilmes/efeitos dos fármacos , Clorexidina/análogos & derivados , Durapatita , Escherichia coli/fisiologia , Nanopartículas/química , Staphylococcus aureus/fisiologia , Óxido de Zinco , Biofilmes/crescimento & desenvolvimento , Clorexidina/química , Clorexidina/farmacologia , Durapatita/química , Durapatita/farmacologia , Óxido de Zinco/química , Óxido de Zinco/farmacologiaRESUMO
Silk fibroin has been widely explored for many biomedical applications, due to its biocompatibility and biodegradability. The aim of this work was to study the role of dialysis and freezing on structural conformation, thermal properties and morphology of silk fibroin hydrogels. Hydrogels were prepared after 3 and 7 days of dialysis and the effect of freezing was analyzed. For that purpose, a part of the fibroin hydrogels underwent freezing at -20 °C for 24 h, followed by lyophilization and the rest of the hydrogels were kept at 8 °C for 24 h, with further lyophilization. The fibroin hydrogels were characterized by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Measurements by XRD and FTIR indicated that silk I and silk II structures were present in the fibroin hydrogels and that the secondary structure of fibroin is transformed mostly to ß-sheet during the gelation process. Thermal analysis indicated that fibroin hydrogels are thermally stable with the degradation peak at around 330-340 °C. SEM micrographs showed porous structures and the fibroin hydrogels subjected to freezing presented a much larger pore size. Results indicate that the dialysis time and freezing did not alter the material crystallinity, conformation or thermal behavior; however, hydrogel microstructure was strongly affected by dialysis time and freezing, showing controlled pores size. This study provides fundamental knowledge on silk fibroin hydrogels preparation and properties and the studied hydrogels are promising to be used in the biomaterial field.
Assuntos
Fibroínas/química , Hidrogéis/química , Conformação Molecular , Estrutura Molecular , Animais , Materiais Biocompatíveis , Tecnologia Biomédica , Bombyx/química , Teste de Materiais , Microscopia Eletrônica de Varredura , Porosidade , Soluções/química , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
Surfaces of medical implants are generally designed to encourage soft- and/or hard-tissue adherence, eventually leading to tissue- or osseo-integration. Unfortunately, this feature may also encourage bacterial adhesion and biofilm formation. To understand the mechanisms of bone tissue infection associated with contaminated biomaterials, a detailed understanding of bacterial adhesion and subsequent biofilm formation on biomaterial surfaces is needed. In this study, a continuous-flow modular reactor composed of several modular units placed in parallel was designed to evaluate the activity of circulating bacterial suspensions and thus their predilection for biofilm formation during 72 h of incubation. Hydroxyapatite discs were placed in each modular unit and then removed at fixed times to quantify biofilm accumulation. Biofilm formation on each replicate of material, unchanged in structure, morphology, or cell density, was reproducibly observed. The modular reactor therefore proved to be a useful tool for following mature biofilm formation on different surfaces and under conditions similar to those prevailing near human-bone implants.
Assuntos
Fenômenos Fisiológicos Bacterianos , Biofilmes/crescimento & desenvolvimento , Reatores Biológicos/microbiologia , Transplante Ósseo , Infecções Estafilocócicas/microbiologia , Staphylococcus epidermidis/fisiologia , Aderência Bacteriana , Materiais Biocompatíveis/análise , Humanos , Ortopedia , Staphylococcus epidermidis/isolamento & purificaçãoRESUMO
Staphylococcus comprises up to two-thirds of all pathogens in orthopedic implant infections and they are the principal causative agents of two major types of infection affecting bone: septic arthritis and osteomyelitis, which involve the inflammatory destruction of joint and bone. Bacterial adhesion is the first and most important step in implant infection. It is a complex process influenced by environmental factors, bacterial properties, material surface properties and by the presence of serum or tissue proteins. Properties of the substrate, such as chemical composition of the material, surface charge, hydrophobicity, surface roughness and the presence of specific proteins at the surface, are all thought to be important in the initial cell attachment process. The biofilm mode of growth of infecting bacteria on an implant surface protects the organisms from the host immune system and antibiotic therapy. The research for novel therapeutic strategies is incited by the emergence of antibiotic-resistant bacteria. This work will provide an overview of the mechanisms and factors involved in bacterial adhesion, the techniques that are currently being used studying bacterial-material interactions as well as provide insight into future directions in the field.
Assuntos
Aderência Bacteriana , Infecções Relacionadas à Prótese/microbiologia , Infecções Estafilocócicas/microbiologia , Albuminas/química , Antibacterianos , Biofilmes/crescimento & desenvolvimento , Osso e Ossos/microbiologia , Farmacorresistência Bacteriana , Fibrinogênio/química , Fibronectinas/química , Humanos , Sistema Imunitário , Laminina/química , Ortopedia , Próteses e Implantes , Staphylococcus aureus/metabolismo , Staphylococcus epidermidis/metabolismo , Propriedades de SuperfícieRESUMO
This study concerns the preparation, physical, and in vitro characterization of two different types of hydroxyapatite (HA) microspheres, which are intended to be used as drug-delivery systems and bone-regeneration matrices. Hydroxyapatite nanoparticles (HA-1 and HA-2) were prepared using the chemical precipitation synthesis with H(3)PO(4), Ca(OH)(2), and a surfactant, SDS (sodium dodecyl sulfate), as starting reagents. The HA powders were dispersed in a sodium alginate solution, and spherical particles were obtained by droplet extrusion coupled with ionotropic gelation in the presence of Ca(2+). These were subsequently sintered to produce HA-1 and HA-2 microspheres with a uniform size and interconnected microporosity. Both powders and microspheres were characterized using FTIR and X-ray diffraction. Moreover, SEM and mercury intrusion porosimetry were used to analyze the microspheres, and TEM was used to analyze the powders. Results showed that pure HA and mixtures of HA/beta-TCP in the nanometer range and needlelike shape were obtained for HA-1 and HA-2 powders, respectively. Neutral Red, scanning electron microscopy and confocal microscopy were used to evaluate the behavior of osteoblastic-like MG-63 cells cultured on HA microspheres surfaces for 7 days. Results showed that good adhesion and proliferation of osteoblasts on the HA microspheres surface. Cells built bridges between adjacent microspheres, forming microspheres-cells clusters in both types of materials.
Assuntos
Durapatita/síntese química , Microesferas , Osteoblastos/citologia , Materiais Biocompatíveis , Regeneração Óssea , Adesão Celular , Linhagem Celular , Proliferação de Células , Sistemas de Liberação de Medicamentos , Durapatita/normas , Humanos , Teste de Materiais , Tamanho da Partícula , Porosidade , PósRESUMO
This work consists on the evaluation of the in vitro performance of Ti6Al4V samples PLD (pulsed laser deposition) coated with hydroxyapatite, both pure and mixed with a CaO-P2O5 glass. Previous studies on immersion of PLD coatings in SBF, showed that the immersion apatite films did not present the usual cauliflower morphology but replicated the original columnar structure and exhibited good bioactivity. However, the influence of glass associated to hydroxyapatite concerning adhesion, proliferation and morphology of MG63 cells on the films surface was unclear. In this study, the performance of these PLD coated samples was evaluated, not only following the physical-chemical transformations resulting from the SBF immersion, but also evaluating the cytocompatibility in contact with osteoblast-like MG63 cells. SEM and AFM confirmed that the bioactive ceramic PLD films reproduce the substrate's surface topography and that the films presented good adherence and uniform surface roughness. Physical-chemical phenomena occurring during immersion in SBF did not modify the original columnar structure. In contact with MG63 cells, coated samples exhibited very good acceptance and cytocompatibility when compared to control. The glass mixed with hydroxyapatite induced higher cellular proliferation. Cells grown on these samples presented many filipodia and granular structures, typical features of osteoblasts.