Should deep eutectic solvents be treated as a mixture of two components or as a pseudo-component?

Deep eutectic solvents (DESs) and dilutions thereof (mainly in H2O but also in many other non-aqueous solvents and co-solvent mixtures) have recently attracted great attention. It is well known that DES dilutions exhibit deviations from ideality. Interestingly, the treatment of DES as a mixture of two components or a pseudo-component is by no means trivial when determining deviations in density and, mainly, in viscosity. Herein, we studied aqueous dilutions of one of the most widely studied DES, this is, that composed of choline chloride and urea in a 1:2 molar ratio (e.g., ChCl2U). Using density and viscosity data reported in previous works, we calculated the excess molar volumes (VE) and excess viscosities (ln ηE) considering ChCl2U as either a mixture of two components or a pseudo-component, that is, taking the DES molecular weight as MChCl2U = fChClMChCl + fUMU = 86.58 g mol-1 (with fChCl = 1/3 and fU = 2/3) or as M* ChCl2U = MChCl + 2 MU = 259.74 g mol-1. We found that neither the sign of VE and VE* nor their evolution with temperature was influenced by the use of either MChCl2U or M* ChCl2U, and only the absolute magnitude of the deviation and the DES content (in wt. %) at which the minimum appears exhibited some differences. However, ln ηE and ln ηE* exhibited opposite signs, negative and positive, respectively. The odd achievement of negative ln ηE in aqueous dilutions of ChCl2U characterized by the formation of HB networks suggest the treatment of ChCl2U as a pseudo-component as more appropriate. Moreover, the role played by the presence of U in the evolution of ln ηE* with temperature was also discussed.

Encoding Metal-Cation Arrangements in Metal-Organic Frameworks for Programming the Composition of Electrocatalytically Active Multimetal Oxides.

In the present contribution, we report how through the use of metal-organic frameworks (MOFs) composed of addressable combinations of up to four different metal elements it is possible to program the composition of multimetal oxides, which are not attainable by other synthetic methodologies. Thus, due to the ability to distribute multiple metal cations at specific locations in the MOF secondary building units it is possible to code and transfer selected metal ratios to multimetal oxides with novel, desired compositions through a simple calcination process. The demonstration of an enhancement in the electrocatalytic activity of new oxides by preadjusting the metal ratios is here reported for the oxygen reduction reaction, for which activity values comparable to commercial Pt/C catalysts are reached, while showing long stability and methanol tolerance.

The Manchester-Fothergill and the Elevate Posterior technique for the correction of a cervical elongation and large enterocele in a patient with bladder exstrophy and multiple surgeries.

INTRODUCTION AND HYPOTHESIS: A 60-year-old woman presented with congenital bladder exstrophy, urinary incontinence since birth, and pelvic organ prolapse since the menopause at the age of 46 years. METHODS: The patient (gravida 2, para 2 by cesarean sections and tubal ligation) described an extensive past surgical history that included epispadias and neourethral procedures, anti-reflux surgery using the Lich-Grégoir technique, bilateral ureterosigmoidostomy achieving continence, uterine fixation after the Doléris operation, and neovaginal reconstruction. The physical examination revealed a fourth-degree enterocele with cervical elongation (POP-Q: Aa-2, Ba-2, C + 3, D + 4, gh:5, pb:2.5, Tvl:6, Ap + 3, Bp +6). Gynecological ultrasound and uro-CT were performed to ensure that the ureterosigmoidostomy had been successful, and CT-based 3D bone reconstructions were obtained to calculate the distance between the pubic rami and the ischial spines. Based on a literature review of the management options for these patients and the specific characteristics of our patient, a decision was made to perform trachelectomy (the Manchester technique with Fothergill stitches) and a polypropylene mesh placement with sacrospinous ligament anchor (Elevate Posterior® PC, AMS). RESULTS: Six months after the surgery, we observed good anatomical and functional results with significant improvement in the patient's quality-of-life scale score. CONCLUSION: We believed that the vaginal approach was minimally invasive with a low risk of morbidity in our patient, who had a very altered anatomy, but produced a satisfactory functional result.

Three dimensional macroporous architectures and aerogels built of carbon nanotubes and/or graphene: synthesis and applications.

Carbon nanotubes and graphene are some of the most intensively explored carbon allotropes in materials science. This interest mainly resides in their unique properties with electrical conductivities as high as 10(4) S cm(-1), thermal conductivities as high as 5000 W m(-1) K and superior mechanical properties with elastic moduli on the order of 1 TPa for both of them. The possibility to translate the individual properties of these monodimensional (e.g. carbon nanotubes) and bidimensional (e.g. graphene) building units into two-dimensional free-standing thick and thin films has paved the way for using these allotropes in a number of applications (including photocatalysis, electrochemistry, electronics and optoelectronics, among others) as well as for the preparation of biological and chemical sensors. More recently and while recognizing the tremendous interest of these two-dimensional structures, researchers are noticing that the performance of certain devices can experience a significant enhancement by the use of three-dimensional architectures and/or aerogels because of the increase of active material per projected area. This is obviously the case as long as the nanometre-sized building units remain accessible so that the concept of hierarchical three-dimensional organization is critical to guarantee the mass transport and, as consequence, performance enhancement. Thus, this review aims to describe the different synthetic processes used for preparation of these three-dimensional architectures and/or aerogels containing either any or both allotropes, and the different fields of application in which the particular structure of these materials provided a significant enhancement in the efficacy as compared to their two-dimensional analogues or even opened the path to novel applications. The unprecedented compilation of information from both CNT- and graphene-based three-dimensional architectures and/or aerogels in a single revision is also of interest because it allows a straightforward comparison between the particular features provided by each allotrope.

Deep eutectic solvent-assisted synthesis of biodegradable polyesters with antibacterial properties.

Bacterial infection related to the implantation of medical devices represents a serious clinical complication, with dramatic consequences for many patients. In past decades, numerous attempts have been made to develop materials with antibacterial and/or antifouling properties by the incorporation of antibiotic and/or antiseptic compounds. In this context, deep eutectic solvents (DESs) are acquiring increasing interest not only as efficient carriers of active principle ingredients (APIs) but also as assistant platforms for the synthesis of a wide repertoire of polymer-related materials. Herein, we have successfully prepared biodegradable poly(octanediol-co-citrate) polyesters with acquired antibacterial properties by the DES-assisted incorporation of quaternary ammonium or phosphonium salts into the polymer network. In the resulting polymers, the presence of these salts (i.e., choline chloride, tetraethylammonium bromide, hexadecyltrimethylammonium bromide, and methyltriphenylphosphonium bromide) inhibits bacterial growth in the early postimplantation steps, as tested in cultures of Escherichia coli on solid agar plates. Later, positive polymer cytocompatibility is expected to support cell colonization, as anticipated from in vitro preliminary studies with L929 fibroblasts. Finally, the attractive elastic properties of these polyesters permit matching those of soft tissues such as skin. For all of these reasons, we envisage the utility of some of these antibacterial, biocompatible, and biodegradable polyesters as potential candidates for the preparation of antimicrobial wound dressings. These results further emphasize the enormous versatility of DES-assisted synthesis for the incorporation, in the synthesis step, of a wide palette of APIs into polymeric networks suitable for biomedical applications.

Thermal unfolding and refolding of lysozyme in deep eutectic solvents and their aqueous dilutions.

The stability of hen's egg white lysozyme in different choline chloride-based pseudo-concentrated and neat deep eutectic solvents (DESs) has been studied by means of intrinsic fluorescence and CD spectroscopy. Thermal unfolding experiments carried out in non-diluted urea:choline chloride and glycerol:choline chloride eutectic solvents (UCCl-DES and GCCl-DES, respectively) showed the accumulation at certain temperatures of discrete, partially folded intermediates that displayed a high content of secondary structure and a disrupted tertiary structure. Reversibility of the unfolding process was incomplete in these circumstances, with the urea-based DES showing higher protein structure destabilization upon thermal treatment. On the other hand, aqueous dilution of the eutectic mixtures allowed the recovery of a reversible, two-state denaturation process. Lysozyme activity was also affected in neat and pseudo-concentrated GCCl-DES, with an increasing recovery of activity upon aqueous dilution, and full restoration after DES removal through extensive dialysis. These results suggest that protein interactions at room temperature are reversible and depend on the DES components and on the aqueous content of the original DES dilution.

In situ precipitation of amorphous calcium phosphate and ciprofloxacin crystals during the formation of chitosan hydrogels and its application for drug delivery purposes.

The immobilization of more than one single substance within the structure of a biocompatible polymer provides multifunctional biomaterials with attractive and enhanced properties. In the context of bone tissue engineering, it could be of great interest to synthesize a biomaterial that simultaneously contains amorphous calcium phosphate (ACP), to favor calcium and phosphate precipitation and promote osteogenesis, and an antibiotic such as ciprofloxacin (CFX) that can, eventually, avoid infections resulting after surgical scaffold implantation. However, the co-immobilization of multiple substances is by no means a trivial issue because of the enhanced number of interactions that can take place. One of the main issues is controlling not only the diverse solid forms that individual substances can eventually adopt, but also the forces responsible for the self-organization of the individual components. The latter determines whether phase-separated structures or conjugated architectures are obtained and, consequently, may dramatically affect their functionality. Herein, we have observed-by SEM, TEM, and solid-state NMR-that enzymatically-assisted coprecipitation of ACP and CFX resulted in phase-separated structures. Thus, CFX crystals showed identical morphology to that obtained in the absence of ACP, but the size was smaller. Neither the size nor the morphology of ACP exhibited significant differences whether precipitated with or without CFX, but, in the former case, ACP was stabilized over a wider range of pH and temperature. Finally, by using this methodology and the ice segregation induced self-assembly process (ISISA), we have successfully co-immobilized ACP and CFX in chitosan-based scaffolds. Interestingly, the presence of ACP exerted significant control on the CFX release from these materials.

Phase behavior of elastin-like synthetic recombinamers in deep eutectic solvents.

Deep eutectic solvents promoted the stabilization of the collapsed state of elastin-like recombinamers - and the subsequent formation of aggregates - upon the loss of the structural water molecules involved in hydrophobic hydration. Cryo-etch scanning electron microscopy allowed the observation of these aggregates in neat deep eutectic solvents. The suppression of the lower critical solution temperature transition, observed by differential scanning calorimetry and dynamic light scattering, confirmed the presence of the elastin-like recombinamers in their collapsed state. Actually, the transition from the collapsed to the expanded state was suppressed even after moderate aqueous dilution - for water contents ranging from nil to ca. 45 wt % - and it was only recovered upon further addition of water - above 50 wt %. These features revealed the preferred stabilization of the collapsed state in not only neat deep eutectic solvents but also partially hydrated deep eutectic solvents. We consider that the capability to trigger the lower critical solution temperature transition by partial hydration of deep eutectic solvent may open interesting perspectives for nano(bio)technological applications of elastin-like recombinamers.

Chitosan gelation induced by the in situ formation of gold nanoparticles and its processing into macroporous scaffolds.

This work describes a simple synthetic route to induce chitosan (CHI) gelation by the in situ formation of gold nanoparticles (AuNPs). AuNPs were obtained by thermal treatment (e.g., 40 and 80 °C) of CHI aqueous solutions containing HAuCl(4) and in the absence of further reducing agents. The CHI hydrogels resulting after AuNP formation were submitted to unidirectional freezing and subsequent freeze-drying via ISISA (ice-segregation-induced self-assembly) process for the preparation of CHI scaffolds. The study of AuNP-CHI scaffolds by SEM and confocal fluorescence microscopy revealed a morphological structure characteristic of the hydrogel nature of the samples subjected to the ISISA process. Interestingly, not only the morphology but also the dissolution and swelling degree of the resulting CHI scaffolds were strongly influenced by the strength of the hydrogels obtained by the in situ formation of AuNP. We have also studied the catalytic activity AuNP-CHI scaffolds in the reduction of p-nitrophenol. The negligible dissolution and low swelling degree obtained in certain AuNP-CHI scaffolds allowed them to be used for more than four cycles with full preservation of the reaction kinetics.

Iron Phthalocyanine-Knitted Polymers as Electrocatalysts for the Oxygen Reduction Reaction.

Knitted iron phthalocyanine-based porous polymer networks (K-FePcs) were prepared in a single step using solvent-knitting strategies with commercial iron phthalocyanine as a building monomer. The incorporation of different aryl comonomers (biphenyl and 1,2,4,5-tetraphenylbenzene) to FePc allowed quantitative yields, high porosities, and excellent ORR activity. The reversible Fe(III)/Fe(II) redox potential of FeN4 centers of the knitted polymer networks in N2-saturated electrolyte solution (i.e., ∼0.8 V vs RHE) were shown as good descriptors of their ORR activity. K-FePc2Ph presented the highest amount of FeN4 active sites and an adequate degree of steric hindrance to maintain the isolation between catalytically active sites. Moreover, it displayed comparable current density limits and superior mass activity and half-wave potential (i.e., 0.88 V vs RHE) than those of 20% Pt/C benchmark catalyst, while keeping higher stability toward methanol oxidation. K-FePc2Ph can be an interesting alternative to Pt-based ORR electrocatalysts.

Aqueous-Eutectic-in-Salt Electrolytes for High-Energy-Density Supercapacitors with an Operational Temperature Window of 100 °C, from -35 to +65 °C.

Water-in-salt (WIS) electrolytes are gaining increased interest as an alternative to conventional aqueous or organic ones. WIS electrolytes offer an interesting combination of safety, thanks to their aqueous character, and extended electrochemical stability window, thanks to the strong coordination between water molecules and ion salt. Nonetheless, cost, the tendency of salt precipitation, and sluggish ionic transfer leading to poor rate performance of devices are some intrinsic drawbacks of WIS electrolytes that yet need to be addressed for their technological implementation. It is worth noting that the absence of "free'' water molecules could also be achieved via the addition of a certain cosolvent capable of coordinating with water. This is the case of the eutectic mixture formed between DMSO and H2O with a molar ratio of 1:2 and a melting point as low as -140 °C. Interestingly, addition of salts at near-saturation conditions also resulted in an increase of the boiling point of the resulting solution. Herein, we used a eutectic mixture of DMSO and H2O for dissolution of LiTFSI in the 1.1-8.8 molality range. The resulting electrolyte (e.g., the so-called aqueous-eutectic-in-salt) exhibited excellent energy and power densities when operating in a supercapacitor cell over a wide range of extreme ambient temperatures, from as low as -35 °C to as high as +65 °C.

Brillouin Spectroscopy as a Suitable Technique for the Determination of the Eutectic Composition in Mixtures of Choline Chloride and Water.

Deep eutectic solvents (DESs) resulting from the right combination between a hydrogen-bond donor (HBD) and a hydrogen-bond acceptor (HBA) are becoming quite popular in number of applications. More recently, natural DESs (NADESs) containing sugars, natural organic acids, and amino acids as HBDs and ChCl as HBA have received great attention because of their further environmental sustainability as compared to regular DESs. Within this context, mixing water in controlled amounts has been widely accepted as a simple and practical way of altering DES chemical and thermodynamic properties, with viscosity and conductivity experiencing the most significant changes. However, the number of papers describing eutectic mixtures with water as the only HBD is scarce and basically none has been done in fundamental terms. Herein, we investigated mixtures composed of water as the only HBD and ChCl as the HBA using differential scanning calorimetry (DSC) as well as 1H nuclear magnetic resonance (NMR) and Brillouin spectroscopies. We found the aqueous dilution of ChCl/2H2O with a ChCl/2H2O content of ca. 80 wt % was an eutectic. Interestingly, this mixture could be considered a NADES according to its eutectic distance (ΔTme), in range to eutectics obtained in aqueous dilutions of salt hydrates.

Aqueous Co-Solvent in Zwitterionic-based Protic Ionic Liquids as Electrolytes in 2.0†V Supercapacitors.

High-performance energy-storage devices are receiving great interest in sustainable terms as a required complement to renewable energy sources to level out the imbalances between supply and demand. Besides electrode optimization, a primary objective is also the judicious design of high-performance electrolytes combining novel ionic liquids (ILs) and mixtures of aqueous solvents capable of offering "à la carte" properties. Herein, it is described the stoichiometric addition of a zwitterion such as betaine (BET) to protic ILs (PILs) such as those formed between methane sulfonic acid (MSAH) or p-toluenesulfonic acid (PTSAH) with ethanolamine (EOA). This addition resulted in the formation of zwitterionic-based PILs (ZPILs) containing the original anion and cation as well as the zwitterion. The ZPILs prepared in this work ([EOAH]+ [BET][MSA]- and [EOAH]+ [BET][PTSA]- ) were liquid at room temperature even though the original PILs ([EOAH]+ [MSA]- and [EOAH]+ [PTSA]- ) were not. Moreover, ZPILs exhibited a wide electrochemical stability window, up to 3.7 V vs. Ag wire for [EOAH]+ [BET][MSA]- and 4.0 V vs. Ag wire for [EOAH]+ [BET][PTSA]- at room temperature, and a high miscibility with both water and aqueous co-solvent (WcS) mixtures. In particular, "WcS-in-ZPIL" mixtures of [EOAH]+ [BET][MSA]- in 2 H2 O/ACN/DMSO provided specific capacitances of approximately 83 F g-1 at current densities of 1 A g-1 , and capacity retentions of approximately 90 % after 6000 cycles when operating at a voltage of 2.0 V and a current density of 4 A g-1 .

Highly Efficient and Recyclable Carbon-Nanofiber-Based Aerogels for Ionic Liquid-Water Separation and Ionic Liquid Dehydration in Flow-Through Conditions.

Ionic liquids (ILs) are being widely used in many diverse areas of social interest, including catalysis, electrochemistry, etc. However, issues related to hygroscopicity of many ILs and the toxic and/or nonbiodegradable features of some of them limit their practical use. Developing materials capable of IL recovery from aqueous media and dehydration, thus allowing their recycling and subsequent reutilization, in a single and efficient process still poses a major challenge. Herein, electrically conductive aerogels composed of carbon nanofibers (CNFs) with remarkable superhydrophobic features are prepared. CNF-based 3D aerogels are prepared through a cryogenic process, so called ice-segregation-induced self-assembly (ISISA) consisting of the unidirectional immersion of an aqueous chitosan (CHI) solution also containing CNFs in suspension into a liquid nitrogen bath, and subsequent freeze-drying. The CNF-based 3D aerogels prove effective for absorption of ILs from aqueous biphasic systems and recovery with quite low water contents just through a single process of filtration. Moreover, the electrical conductivity of CNF-based 3D aerogels is particularly interesting to treat highly viscous ILs because the Joule effect allows not only shortening of the absorption process but also enhancement of the flux rate when operating in flow-through conditions.

Carbon-GO Composites with Preferential Water versus Ethanol Uptake.

The elimination of small amounts of water from alcohols is by no means a trivial issue in many practical applications like, for instance, the dehumidification of biocombustibles. The use of carbonaceous materials as sorbents has been far less explored than that of other materials because their hydrophobic character has typically limited their water uptake. Herein, we designed a synthetic process based on the use of eutectic mixtures that allowed the homogeneous dispersion of graphene oxide (GO) in the liquid containing the carbon precursor, e.g., furfuryl alcohol. Thus, after polymerization and a subsequent carbonization process, we were able to obtain porous carbon-GO composites where the combination of pore diameter and surface hydrophilicity provided a remarkable capacity for water uptake but extremely low methanol and ethanol uptake along the entire range of relative pressures evaluated in this work. Both the neat water uptake and the uptake difference between water and either methanol or ethanol of our carbon-GO composites were similar or eventually better than the uptake previously reported for other materials, also exhibiting preferential water-to-alcohol adsorption, e.g., porous coordination polymers, metal-organic frameworks, polyoxometalates, and covalent two-dimensional nanosheets embedded in a polymer matrix. Moreover, water versus alcohol uptake was particularly remarkable at low partial pressures in our carbon-GO composites.

Favorable Biological Responses of Neural Cells and Tissue Interacting with Graphene Oxide Microfibers.

Neural tissue engineering approaches show increasing promise for the treatment of neural diseases including spinal cord injury, for which an efficient therapy is still missing. Encouraged by both positive findings on the interaction of carbon nanomaterials such as graphene with neural components and the necessity of more efficient guidance structures for neural repair, we herein study the potential of reduced graphene oxide (rGO) microfibers as substrates for neural growth in the injured central neural tissue. Compact, bendable, and conductive fibers are obtained. When coated with neural adhesive molecules (poly-l-lysine and N-cadherin), these microfibers behave as supportive substrates of highly interconnected cultures composed of neurons and glial cells for up to 21 days. Synaptic contacts close to rGO are identified. Interestingly, the colonization by meningeal fibroblasts is dramatically hindered by N-cadherin coating. Finally, in vivo studies reveal the feasible implantation of these rGO microfibers as a guidance platform in the injured rat spinal cord, without evident signs of subacute local toxicity. These positive findings boost further investigation at longer implantation times to prove the utility of these substrates as components of advanced therapies for enhancing repair in the damaged central neural tissue including the injured spinal cord.

Mammalian cell cryopreservation by using liquid marbles.

Liquid marbles (LMs) are nonsticky droplets covered by micro- or nanometrically scaled particles and obtained by simply rolling small amounts of a liquid in a very hydrophobic powder. Since pioneer work by Aussillous and Quéré, a wide palette of hydrophobic materials for the preparation of LMs, as well as potential applications, have been reported. Because of the bioinspired origin of this concept, the applicability of LMs in biomedicine is gaining increasing attention, with remarkable advances in their use as microbioreactors for blood typing, drug screening, and tumor growth, among others. Herein, we explore the novel use of LMs as a biotechnological tool for the cryopreservation of mammalian cells as an alternative to conventional methods, which typically require the use of cryopreservant agents that commonly associate with some degree of cell toxicity. Murine L929 fibroblasts, a reference cell line for cytotoxicity studies, and poly(tetrafluoroethylene), a hydrophobic polymer widely used in cardiovascular surgery, were selected for the preparation of the cell-containing LMs. Our results reveal that there is a safe range of droplet volumes and cell densities that can be successfully used to cryopreserve mammalian cell lines and recover them after thawing without significantly affecting major cellular parameters such as adhesion, morphology, viability, proliferation, and cell cycle. We envision that progress in the exploration of cell-containing LMs could also open their impact as microreactors for the miniaturization of cytotoxicity procedures of drugs and materials in which powerful tools for cell evaluation such as flow cytometry could be used because of the elevated amount of cells handled.

Deep eutectic solvents in polymerizations: a greener alternative to conventional syntheses.

The use of deep eutectic solvents (DESs) that act as all-in-one solvent-template-reactant systems offers an interesting green alternative to conventional syntheses in materials science. This Review aims to provide a comprehensive overview to emphasize the similarities and discrepancies between DES-assisted and conventional syntheses and rationalize certain green features that are common for the three DES-assisted syntheses described herein: one case of radical polymerization and two cases of polycondensations. For instance, DESs contain the precursor itself and some additional components that either provide certain functionality (e.g., drug delivery and controlled release, or electrical conductivity) to the resulting materials or direct their formation with a particular structure (e.g., hierarchical-type). Moreover, DESs provide a reaction medium, so polymerizations are ultimately carried out in a solventless fashion. This means that DES-assisted syntheses match green chemistry principles 2 and 5 because of the economy of reagents and solvents, whereas the functionality incorporated by the second component allows the need for any post-synthesis derivatization to be minimized or even fully avoided (principle 8). DESs also provide new precursors that favor more efficient polymerization (principle 6) by decreasing the energy input required for reaction progress. Finally, the use of mild reaction conditions in combination with the compositional versatility of DESs, which allows low-toxic components to be selected, is also of interest from the viewpoint of green chemistry because it opens up the way to design biocompatible and/or eco-friendly synthetic methods (principle 3).

Sulfur-doped carbons prepared from eutectic mixtures containing hydroxymethylthiophene as metal-free oxygen reduction catalysts.

A template-free approach based on the use of eutectic mixtures composed of 2-hydroxymethylthiophene and furfuryl alcohol has been designed for the preparation of hierarchical sulfur-doped carbons (SPCs) in monolithic form. The temperature used for carbonization, for example, 600, 800, or 900 °C, determined most of the physicochemical properties of the resulting SPCs. Thus, the surface area increased from below 400 to up 775 m(2) g(-1) , along with the carbonization temperature, whereas the sulfur content decreased from approximately 15 to 5 wt %. The oxygen reduction reaction performance in samples carbonized at 900 °C was good, with the four-electron-transfer reaction prevailing over the two-electron-transfer one. Interestingly, the methanol tolerance and stability of these SPCs were also remarkable, with less than 5% current decrease immediately after methanol addition, whereas, in terms of stability, the current decrease was below 8 % after 20000 s. This performance was in the range of that found not only for other SPCs, but also for many nitrogen-doped and even some dual-doped (S and N) ones.