Early complications and quality of life in patients with immediately loaded implant-supported maxillary partial rehabilitations: A prospective cohort study.

BACKGROUND: Immediate loading of dental implants is considered an excellent option to reestablish function and aesthetics in a short period of time, thereby reducing the psychological impact of edentulism. The aim of this study was to describe the incidence of complications in immediately loaded implant-supported single or partial maxillary provisional rehabilitations; to assess changes in patient quality of life (QoL); to evaluate patient overall satisfaction; and to determine whether the occurrence of complications affects these outcomes. MATERIAL AND METHODS: Patients requiring partial rehabilitation with implants in the maxilla were included in a prospective cohort study. In all cases, implant-based restoration with an immediate loading protocol was indicated. A provisional restoration was placed within 72 hours after implant placement. Patient QoL was measured at the first appointment and just before placing the final restoration, using two validated questionnaires. All mechanical and biological complications occurring up until placement of the final restoration were documented. A descriptive and bivariate analysis of the data was performed. RESULTS: Thirty-five patients with 40 prostheses supported by 60 implants were analyzed. Three implant failures were observed, yielding a 95% survival rate. Five provisional prosthesis fractures and two prosthetic screw loosenings were recorded in four patients. A significant reduction in OHIP-14 score was observed. Likewise, significant differences were found in the results of the QoLFAST-10, with a mean difference in score of 7.3 between the initial and final evaluation. CONCLUSIONS: Patients receiving immediately loaded implant-supported single or partial maxillary provisional rehabilitations seem to have a low risk of developing early mechanical (13.3%) or biological complications (5%). These patients appear to experience significant improvement in QoL and report excellent overall satisfaction with the treatment received - though the occurrence of complications seems to affect these outcomes.

Predictors of surgical difficulty in upper third molar removal: a prospective cohort study.

BACKGROUND: Upper third molar (U3M) removal is a common surgical procedure. The aims of this study were to assess the patient-specific, radiological and surgical factors related to the difficulty of U3M removal, and to determine the incidence of intraoperative and postoperative complications. MATERIAL AND METHODS: A prospective cohort study was carried out in adult patients undergoing U3M removal. Operative time, surgeon-reported difficulty and the Parant classification were used to assess extraction difficulty. Clinical, radiological and surgical factors were recorded to determine their relationship with surgical difficulty. A descriptive, bivariate and multivariate statistical analysis was carried out. RESULTS: A total of 250 patients were included. The mean operative time was 10.4 (±12.3) minutes, mean surgeon-reported difficulty was 3.2/10 (±2.3). The multivariate analysis showed greater impaction against the second molar and greater soft tissue and bony impaction to significantly increase operative time and surgeon-perceived difficulty. Additionally, surgeon experience was related to perceived difficulty. The overall incidence of intraoperative complications was 0.8%, and no postoperative events were recorded. CONCLUSIONS: Upper third molars in close relation with the roots of the adjacent second molar and with soft tissue and bony impaction are significantly more difficult to extract. Perceived difficulty was related to surgeon experience. This procedure appears to produce few intra- and postoperative complications.

Diagnosis and indications for the extraction of third molars - The SECIB clinical practice guideline.

BACKGROUND: The removal of third molars (3Ms) is the most frequent surgical procedure in the field of Oral Surgery. As a result, the Spanish Society of Oral Surgery (SECIB) aims to create a Clinical Practice Guideline (CPG) that offers evidence-based recommendations for optimal clinical practice. Specifically, the CPG will focus on providing guidance regarding the indications and criteria for clinical and radiological diagnosis of patients with 3Ms. MATERIAL AND METHODS: This CPG was developed by the SECIB, following the methodological guidelines described in the methodological manual for the "Development of Clinical Practice Guidelines in the National Health System". Several PICO questions related to the diagnosis and indications for the extraction of 3Ms were formulated. The leading experts carried out the evaluation of the evidence and the formulation of specific recommendations. RESULTS: A total of 17 PICO questions were evaluated, addressing the indications, prognosis, diagnosis, and cost-benefit relationship of 3M extraction. CONCLUSIONS: The present Clinical Practice Guideline provides evidence-based recommendations on the diagnosis and indications for 3M extraction. These evidence-based recommendations can assist healthcare professionals and the general population in making informed decisions regarding the management of 3Ms.

Aqueous extract OF Moringa oleifera Lam leaves added to freezing extenders damages goat sperm membranes.

BACKGROUND: Semen cryopreservation is a biotechnology used frequently in animal production; however, there are some obstacles, such as those caused by high levels of reactive oxygen species (ROS). Moringa oleifera (MO) is known as a potent source of antioxidants and might be an important adjuvant. OBJECTIVE: The objective of this study was to determine the effect of different concentrations of MO extract supplementation on goat semen cryopreservation efficiency. MATERIALS AND METHODS: Ejaculates (n=6) from four goat breeders were pooled and diluted in skimmed milk (SM) or Tris-egg yolk (TEY)-based extenders and supplemented with different concentrations of MO extract (0, 1, 2 and 5 mg/mL). After the freeze-thaw cycle, sperm kinetics and viability were assessed. RESULTS: With the SM extender, straightness, wobble and plasma membrane integrity were lower than in the control group (P < 0.05). With the TEY extender, wobble was lower in with 5 mg/mL MO extract than in the control group (P < 0.05). As regards sperm ultrastructure, evaluated by SEM, the MO extract, regardless of the diluent used, damaged the membrane of sperm cells in a dose-dependent manner. CONCLUSION: The addition of aqueous extract of MO leaves in both diluents at all concentrations tested affects the parameters of sperm progressivity and damages the plasma membrane in a dose-dependent manner. DOI: 10.54680/fr23310110712.

Patient-centered outcomes after surgical treatment of peri-implantitis: a prospective clinical study.

BACKGROUND: Peri-implantitis is an inflammatory process affecting soft and hard tissues surrounding dental implants, causing progressive marginal bone loss. Peri-implant surgery is the treatment of choice. However, evidence about its impact on patients' quality of life (QoL) is limited. This study aimed to assess pain and QoL in the first seven post-operative days and measure patient satisfaction at the end of this period. MATERIAL AND METHODS: A prospective cohort study was conducted in patients with peri-implantitis. Patients reported pain on a visual analogue scale (VAS) ranging from 0 to 100mm every day during the first week after surgery. They then completed the OHIP-14sp questionnaire. A descriptive and inferential data analysis was used to assess the effect of surgical approach (resective, regenerative or combined), gender and working status on pain, satisfaction and QoL. RESULTS: Forty-one patients (93,2%) completed the daily pain VAS; scores ranged from 0 to 95 mm. Gender, occupation, or type of surgery had no significant effect upon its evolution. The mean total OHIP-14sp score was 16.7 (range = 5 to 33), indicating low to moderate deterioration in perceived oral health. Postoperative OHRQoL was significantly higher in working patients (mean difference (MD): 3.94; P = 0.042), and with the regenerative (MD: 6.34; P = 0.044) or the combined approach (MD: 5.41; P = 0.027). CONCLUSIONS: Considering the limitations of this study, postoperative pain was mild to moderate and decreased after the third day. Surgical treatment of peri-implantitis has an impact on QoL, especially when augmentation procedures are involved. This impact is higher in working patients.

Comparison of two different lingual flap advancement techniques and vascular structure identification: a human cadaver study.

BACKGROUND: One of the most frequent complications in guided bone regeneration (GBR) is wound dehiscence, which compromises treatment outcomes. Thus, primary tension-free suture is essential to avoid wound dehiscence. The purpose of this study was to compare the extension of 2 different mandibular flaps in human cadaveric specimens, and to measure the size of the supraperiosteal blood vessels. MATERIAL AND METHODS: Five freshly unfrozen human cadaveric specimens were used. Arteries and veins were marked and bilateral classical lingual flaps (extending from the second premolar to the retromolar area) were prepared. In one side, the mylohyoid muscle was detached to increase the coronal extension of the flap. An implant drill was used to measure the extension of the flap after exerting 30 g of traction, before and after detaching the mylohyoid muscle. The size of the largest vascular structures of the flap was measured using a periodontal probe. RESULTS: The classical flap extension was 5.99 mm (95% confidence interval (CI): 5.08 to 6.90), while the coronally advanced flap extension with mylohyoid muscle detachment was 14.96 mm (95%CI: 10.81 - 19.11). A statistically significant difference was found between the 2 groups (p= 0.0002), with a mean extension difference was 8.97 mm (95%CI: 5.02 to 12.91). The mean largest artery had 0.20 mm of diameter (95%CI: 0.15 - 0.26). CONCLUSIONS: The detachment of the mylohyoid muscle from the lingual flap allows to significantly increase its extension by 2.5 times. The superficial arteries found in the lingual flap have a small diameter (around 0.2mm).

Erythritol-enriched powder and oral biofilm regrowth on dental implants: an in vitro study.

BACKGROUND: Peri-implant mucositis and peri-implantitis are the main biological complications associated with dental implants. Since most authors agree that bacteria play a major etiological role, the main aims of this study were to determine if a formulation of erythritol and chlorhexidine applied with an air polishing system inhibits biofilm regrowth over dental implants and to compare the decontamination capacity of this therapy with that of mechanical removal by saline and gauze. MATERIAL AND METHODS: A multispecies biofilm (P. gingivalis, A. actinomycetemcomitans, F. nucleatum, A. naeslundii, V. parvula and S. oralis) was grown for 14 days on 52 dental implants in an artificial mouth. These implants were divided into three groups according to the applied treatment: 14 negative control (CON), 19 erythritol-chlorhexidine (ERY) and 19 gauze with saline (GAU) samples. Twelve dental implants from the ERY and GAU groups and 8 implants from the CON group were re-incubated for 7 additional days after treatment. The bacterial count was performed by quantitative polymerase chain reaction (qPCR) using propidium monoazide (PMA). A descriptive and bivariate analysis of the data was performed. RESULTS: The erythritol and chlorhexidine formulation significantly inhibited biofilm regrowth in comparison with the mechanical treatment (GAU), since a significant decrease in all the species was observed in the ERY group (except for Aggregatibacter actinomycetemcomitans). The antibiofilm and antibacterial capacity of the two active treatment groups (ERY and GAU) was similar for a 14 days multispecies in vitro biofilm, except for the lower count of A. naeslundii in the GAU group. CONCLUSIONS: The use of erythritol powder with chlorhexidine applied with an air polishing system reduces biofilm regrowth over dental implants when compared with mechanical removal by saline and gauze. This effect might be beneficial for patients included in peri-implant maintenance programs.

Effect of bone loss on the fracture resistance of narrow dental implants after implantoplasty. An in vitro study.

BACKGROUND: Implantoplasty (IP) involves polishing of the exposed surface of implants affected by peri-implantitis (PI). A study was made to determine whether the degree of bone loss influences the fracture resistance of implants with or without IP. MATERIAL AND METHODS: An in vitro study was carried out on 32 narrow (3.5 mm) dental implants with a rough surface and external hexagonal connection. Implantoplasty was performed in half of the implants of the sample. Both the IP and control implants were divided into two subgroups according to the amount of bone loss (3 mm or 7.5 mm). Standardized radiographic assessment of implant width was performed using specific software. The main outcome variable was the maximum compression force (Fmax) of implants when subjected to static resistance to fracture tests. Implant fractures were subsequently analyzed by scanning electron microscopy. A descriptive and bivariate analysis of the data was performed. RESULTS: Significant changes in implant width were observed after IP (p<0.05). No significant differences between IP and control implants were recorded in terms of the Fmax values in the two bone loss subgroups (3 mm: control 854.37N 195.08 vs. IP 752.12N 186.13; p=0.302, and 7.5 mm: control 548.82N 80.02 vs. IP 593.69N 111.07; p=0.370). Greater bone loss was associated to a decrease in Fmax, which proved significant for the control implants (p=0.001). Fractures were more frequently located in the platform (n=13). CONCLUSIONS: Implants with more apical bone levels appear to be more susceptible to fracture. On the other hand, IP does not seem to significantly decrease the fracture resistance of narrow (3.5 mm) platform dental implants with external hexagonal connections. The fact that most fractures occur in the platform area indicates that the latter is exposed to more mechanical stress.

Is measurement of the gingival biotype reliable? Agreement among different assessment methods.

BACKGROUND: To determine agreement among the most commonly used methods for assessing the gingival biotype. MATERIAL AND METHODS: An electronic survey was sent to a sample of dentists practicing in Spain. The questionnaire was based on the evaluation of 5 cases involving different gingival biotype assessment methods. Dentists were required to classify the cases as having a "thin", "thick" or "not able to classify" biotype. Each case was assessed using a frontal intraoral photo of the anterior teeth; an enlarged photo of the buccal aspect of the tooth with a periodontal probe inserted inside the sulcus; and the real thickness measured in mm with a calibrated needle. Agreement among the classifications was assessed using Cohen's kappa coefficient. RESULTS: A total of 104 surveys were analyzed. The most commonly used assessment method was visual evaluation of the morphology of the gingiva and the teeth (62.5%). Concordance among the three different methods was weak (kappa = 0.278). Agreement among the classification methods was greater in extreme cases (thinner and thicker gingival thickness). CONCLUSIONS: The most commonly used methods for assessing gingival biotype are not reliable. The three tested methods show poor to weak agreement, which leads to non-reliable estimation of the gingival biotype.

Influence of information concerning a computerized anesthesia system on dental anxiety: a randomized controlled clinical trial.

BACKGROUND: A single-blinded randomized controlled trial among patients requiring an upper third molar extraction was performed to evaluate the anxiety degree after receiving information or not about the functioning of The Wand system. Secondarily, perceived pain and the need of re-anesthesia were assessed. MATERIAL AND METHODS: Patients were randomly assigned to the experimental group (detailed explanation about The Wand) or control group (no specific information). Local anesthesia with The Wand consisted in a supraperiosteal infiltrative technique injection 1.6 mL at the buccal and 0.2 mL at the palatal side. Distinct questionnaires for assessing dental anxiety and 100-mm visual analog scales to assess pain were delivered. Demographic data, radiological parameters, operative time and type of intervention were also registered. A descriptive bivariate analysis by non-parametric tests to detect differences in anxiety, pain and re-anesthesia was performed by SPSS 22.0 (SPPS Inc. Chicago, USA). RESULTS: A total of 85 patients were assessed for eligibility but 17 participants were lost due to the cancellation of the visit for the surgical intervention. Finally, sixty-eight patients were included (34 participants in each group), 47 women (69.1%) and 21 men (30.9%), with an average age of 28.8 (± 9.3) years. CONCLUSIONS: Patients that received a detailed explanation of The Wand did not have a significant reduction of the anxiety degree and perceived pain during the anesthetic act compared to patients that received no information. The need of re-anesthesia was not related to the anxiety level but was significantly related to increasing operative time.

Fracture resistance after implantoplasty in three implant-abutment connection designs.

BACKGROUND: To assess the effect of implantoplasty and implant-abutment design on the fracture resistance and macroscopic morphology of narrow-diameter (3.5 mm) dental implants. MATERIAL AND METHODS: Screw-shaped titanium dental implants (n = 48) were studied in vitro. Three groups (n = 16) were established, based on implant-abutment connection type: external hexagon, internal hexagon and conical. Eight implants from each group were subjected to an implantoplasty procedure; the remaining 8 implants served as controls. Implant wall thickness was recorded. All samples were subjected to a static strength test. RESULTS: The mean wall thickness reductions varied between 106.46 and 153.75 µm. The mean fracture strengths for the control and test groups were, respectively, 1211.90±89.95 N and 873.11±92.37 N in the external hexagon implants; 918.41±97.19 N and 661.29±58.03 N in the internal hexagon implants; and 1058.67±114.05 N and 747.32±90.05 N in the conical connection implants. Implant wall thickness and fracture resistance (P < 0.001) showed a positive correlation. Fracture strength was influenced by both implantoplasty (P < 0.001) and connection type (P < 0.001). CONCLUSIONS: Implantoplasty in diameter-reduced implants decreases implant wall thickness and fracture resistance, and varies depending on the implant-abutment connection. Internal hexagon and conical connection implants seem to be more prone to fracture after implantoplasty.

Development and viability of biofilms grown on experimental abutments mimicking dental implants: An in vivo model.

BACKGROUND: To determine whether an experimental abutment mimicking the macro- and microstructure of a dental implant is a suitable method for recovering biofilm, and to describe the features of biofilms formed around such abutments on healthy implants. MATERIAL AND METHODS: Experimental abutments were used in 15 patients without peri-implant diseases. After 14 days' absence of dental hygiene in this area, the abutments were retrieved and analyzed through confocal laser scanning microscopy and scanning electron microscopy. The biofilm formation on the surface of the first 5 abutments was determined by a fluorescence-staining method using SYTO9 nucleic acid stain. In order to study the biofilm's coverage and vitality, 10 additional abutments were assessed using live & dead bacterial viability. Descriptive and bivariate analyses of the data were performed. RESULTS: A global plaque coverage of the abutments was observed in all cases. The submucosal area of the abutment was mostly covered with biofilm (over 21%). Moreover, significant differences between supra- and subgingival locations were detected. CONCLUSIONS: This in vivo experimental model allows detailed observation of the extensive plaque growth found on exposed experimental abutments mimicking dental implants when hygiene measures are absent. The biofilm coverage is significantly higher in the supragingival zone than in the subgingival portion.

Accuracy and the role of experience in dynamic computer guided dental implant surgery: An in-vitro study.

BACKGROUND: To compare the accuracy of implant placement using the conventional freehand method and a dynamic navigation system; to assess the role of the surgeon's experience in implant placement using these two methods. MATERIAL AND METHODS: A randomized in-vitro study was conducted. Six resin mandible models and 36 implants were used. Two researchers with differing clinical experience (novice and experienced) placed implants using either the Navident dynamic navigation system (navigation group) or the conventional freehand method (freehand group). Accuracy was measured by overlaying the real position in the postoperative CBCT on the virtual presurgical placement of the implant in a CBCT image. Descriptive and bivariate analyses of the data were performed. RESULTS: The navigation group showed significantly higher accuracy for all the variables studied except 3D entry and depth deviation. This system significantly enhanced the accuracy of the novice professional in several outcome variables in comparison with the freehand implant placement method. However, when the implants were placed by the experienced clinician the dynamic navigation system only improved angulation deviation. Significant differences were found between the 2 professionals when the freehand method was employed. Similar deviations were observed for the implants placed with the navigation system. CONCLUSIONS: Dynamic computer assisted surgery systems allow more accurate implant placement in comparison with the conventional freehand method, regardless of the surgeon's experience. However, this system seems to offer more advantages to novice professionals, since it allows them to reduce their deviations significantly and achieve similar results to those of experienced clinicians.

Photodynamic effect of zinc porphyrin on the promastigote and amastigote forms of Leishmania braziliensis.

Leishmaniasis is a neglected disease present in more than 88 countries. The currently adopted chemotherapy faces challenges related to side effects and the development of resistance. Photodynamic therapy (PDT) is emerging as a therapeutic modality for cutaneous leishmaniasis. Zn(ii) meso-tetrakis(N-ethylpyridinium-2-yl)porphyrin (ZnTE-2-PyP4+, ZnP) is a cationic, water-soluble, zinc porphyrin-based photosensitizer whose photodynamic effect on Leishmania braziliensis was analyzed by evaluating the number of visibly undamaged and motile cells, cell membrane integrity, mitochondrial membrane potential, and ultrastructural damage. Treatment of parasites with ZnP and light induced damage in up to 90% of L. braziliensis promastigote cells. Propidium iodide labeling suggested the loss of plasma membrane integrity. In samples treated with ZnP and light, a hyperpolarization of the mitochondrial membrane potential was also observed. Ultrastructural evaluation of promastigotes after photodynamic treatment indicated a loss of cytoplasmic material and the presence of vacuoles. Scanning electron microscopy showed wrinkling of the plasma membrane and a reduced cell volume. Additionally, the number of amastigotes per macrophage was reduced by about 40% after photodynamic application. The treatment showed no considerable toxicity against mammalian cells. Therefore, the results indicated that PDT associated with ZnTE-2-PyP4+ represents a promising alternative to cutaneous leishmaniasis treatment.

Outbreak of KPC-3-producing ST15 and ST348 Klebsiella pneumoniae in a Portuguese hospital.

To date, only a few sporadic cases of infections due to Klebsiella pneumoniae carbapenemase (KPC) producers have been reported in Portugal. Here, we report for the first time an outbreak of K. pneumoniae KPC-3 producers in a tertiary-care hospital during 2013. Twenty-seven ertapenem-resistant K. pneumoniae were identified in patients at a tertiary-care hospital during 2013 isolated predominantly from urine (48·1%) and blood (25·9%) cultures. All isolates were highly resistant to ß-lactam antibiotics and most showed intermediate resistance to imipenem. The more frequent ß-lactamases were TEM- (77·7%), CTX-M- (70·3%) and KPC-type (66·6%). KPC-3 was identified by sequencing. The bla KPC-3 gene was associated with an IncF plasmid, and efficiently transferred to E. coli J53. Pulsed-field gel electrophoresis typing revealed three clusters of isolates which were further characterized by multi-locus sequence typing as ST11, ST15 and ST348. Ertapenem-resistant ST15 was already in circulation in the hospital, related to expression of OmpK36 modified porin, but the other two sequence types had not been previously found in the hospital. We conclude that the IncF plasmid mediated transfer of KPC-3 in the outbreak and that implementation of carbapenemase gene screening in isolates from patients on admission to hospital is advisable in order to control dissemination of these antimicrobial resistance elements.

Quality of life after upper third molar removal: A prospective longitudinal study.

BACKGROUND: Third molar extraction is a very common procedure in Dentistry. The aim of this study was to evaluate the quality of life (QoL) and satisfaction of patients undergoing extraction of an upper third molar under local anesthesia. A second objective was to describe the evolution of self-reported pain measured in a visual analogue scale (VAS) in the 7 days after surgery and its relationship with pre- and intraoperative factors. MATERIAL AND METHODS: A prospective longitudinal cohort study was made. Fifty-five patients received a questionnaire assessing social and working isolation, eating and speaking ability, diet modifications, sleep impairment, physical appearance, discomfort at suture removal and overall satisfaction. Pain was registered daily on a VAS scale. A descriptive and bivariate analysis of the data was performed. RESULTS: Forty-seven patients were included. Pain decreased lineally across the 7 days, and relief was significant between days 2 and 3. Intraoperative complications were significantly associated with pain. The complication that showed the highest pain score was the tuberosity fracture. CONCLUSIONS: Upper third molar removal significantly affects the patient's quality of life, particularly during the first 2 days after extraction.

Predictive factors of difficulty in lower third molar extraction: A prospective cohort study.

BACKGROUND: Several publications have measured the difficulty of third molar removal, trying to establish the main risk factors, however several important preoperative and intraoperative variables are overlooked. MATERIAL AND METHODS: A prospective cohort study comprising a total of 130 consecutive lower third molar extractions was performed. The outcome variables used to measure the difficulty of the extraction were operation time and a 100mm visual analogue scale filled by the surgeon at the end of the surgical procedure. The predictors were divided into 4 different groups (demographic, anatomic, radiographic and operative variables). A descriptive, bivariate and multivariate analysis of the data was performed. RESULTS: Patients' weight, the presence of bulbous roots, the need to perform crown and root sectioning of the lower third molar and Pell and Gregory 123 classification significantly influenced both outcome variables (p< 0.05). CONCLUSIONS: Certain anatomical, radiological and operative variables appear to be important factors in the assessment of surgical difficulty in the extraction of lower third molars.

Clinician-related factors behind the decision to extract an asymptomatic lower third molar. A cross-sectional study based on Spanish and Portuguese dentists.

BACKGROUND: Scientific literature estimates that around 18 to 40 % of asymptomatic third molars are extracted. The aims of the present study were to determine the indications for extraction of asymptomatic lower third molars in a sample of Spanish and Portuguese dentists, and to relate these indications to the clinicians' training and professional experience. MATERIAL AND METHODS: A survey consisting of 15 cases of asymptomatic lower third molars was emailed to Portuguese and Spanish dentists. The clinicians were asked to assess the level of difficulty of the extractions and to make a reasoned recommendation based on the panoramic radiographs, gender and age of the patients. RESULTS: 381 clinicians filled in the questionnaires. Most of the professionals had over 13 years of clinical experience. The number of Spanish clinicians with postgraduate degrees in Oral Surgery was significantly higher. On average, 42% of respondents recommended extraction of asymptomatic third molars. The indication for extraction was significantly higher among Portuguese dentists. Clinical experience was negatively correlated with the perceived extraction difficulty (p<0.05). The main reason given for extracting was the prevention of pericoronitis, whereas that for not extracting was the absence of a clear indication and the risk of injuring the inferior alveolar nerve. CONCLUSIONS: The Portuguese dentists were more in favour of removing asymptomatic lower third molars than the Spanish dentists, although the latter had a higher proportion of professionals with postgraduate studies in Oral Surgery.

Aesthetic perception of single implants placed in the anterior zone. A cross-sectional study.

BACKGROUND: Several aesthetic indexes have been described to assess implant aesthetics. The aim of this study was to compare the aesthetic assessment made by dental professionals and students of single-tooth implants placed in the upper incisors. MATERIALS AND METHODS: A cross-sectional survey study using a subjective questionnaire to assess the aesthetics in 3 implant supported single-tooth cases in the anterior maxilla was performed. The interviewed subjects were divided into 4 groups: dentist with experience in implant treatment, dentists without experience in implants and 3rd and 5th year dental students. The questionnaire consisted of 2 visual analogue scales (VAS) to evaluate aesthetics, the pink esthetic score (PES), the white esthetic score (WES) and the simplified papilla index (PI). RESULTS: One-hundred dentists and one-hundred dental students filled the aesthetic assessment questionnaire. The results showed that the subjects were more critical than reference values, specially concerning prosthetic issues. The differences between groups were more obvious in the case with the best result. On the other hand, few differences were detected in the remaining cases. Regarding soft tissue and crown features, experienced dentists in implant dentistry were the most demanding. Cronbach's Alpha showed values ≥ 0,8 in the questionnaire in every case, which indicates an adequate reliability. CONCLUSIONS: Dentists and dental students have different opinions when assessing aesthetics of single tooth implant supported cases. Experience and area of expertise seem to influence the evaluation of aesthetics in the anterior region.