Elemental signatures of Australopithecus africanus teeth reveal seasonal dietary stress.

Reconstructing the detailed dietary behaviour of extinct hominins is challenging1-particularly for a species such as Australopithecus africanus, which has a highly variable dental morphology that suggests a broad diet2,3. The dietary responses of extinct hominins to seasonal fluctuations in food availability are poorly understood, and nursing behaviours even less so; most of the direct information currently available has been obtained from high-resolution trace-element geochemical analysis of Homo sapiens (both modern and fossil), Homo neanderthalensis4 and living apes5. Here we apply high-resolution trace-element analysis to two A. africanus specimens from Sterkfontein Member 4 (South Africa), dated to 2.6-2.1 million years ago. Elemental signals indicate that A. africanus infants predominantly consumed breast milk for the first year after birth. A cyclical elemental pattern observed following the nursing sequence-comparable to the seasonal dietary signal that is seen in contemporary wild primates and other mammals-indicates irregular food availability. These results are supported by isotopic evidence for a geographical range that was dominated by nutritionally depauperate areas. Cyclical accumulation of lithium in A. africanus teeth also corroborates the idea that their range was characterized by fluctuating resources, and that they possessed physiological adaptations to this instability. This study provides insights into the dietary cycles and ecological behaviours of A. africanus in response to food availability, including the potential cyclical resurgence of milk intake during times of nutritional challenge (as observed in modern wild orangutans5). The geochemical findings for these teeth reinforce the unique place of A. africanus in the fossil record, and indicate dietary stress in specimens that date to shortly before the extinction of Australopithecus in South Africa about two million years ago.

Finite element analysis of Neanderthal and early Homo sapiens maxillary central incisor.

Neanderthal anterior teeth are very large and have a distinctive morphology characterized by robust 'shovel-shaped' crowns. These features are frequently seen as adaptive responses in dissipating heavy mechanical loads resulting from masticatory and non-masticatory activities. Although the long-standing debate surrounding this hypothesis has played a central role in paleoanthropology, is still unclear if Neanderthal anterior teeth can resist high mechanical loads or not. A novel way to answer this question is to use a multidisciplinary approach that considers together tooth architecture, dental wear and jaw movements. The aim of this study is to functionally reposition the teeth of Le Moustier 1 (a Neanderthal adolescent) and Qafzeh 9 (an early Homo sapiens adolescent) derived from wear facet mapping, occlusal fingerprint analysis and physical dental restoration methods. The restored dental arches are then used to perform finite element analysis on the left central maxillary incisor during edge-to-edge occlusion. The results show stress distribution differences between Le Moustier 1 and Qafzeh 9, with the former displaying higher tensile stress in enamel around the lingual fossa but lower concentration of stress in the lingual aspect of the root surface. These results seem to suggest that the presence of labial convexity, lingual tubercle and of a large root surface in Le Moustier 1 incisor helps in dissipating mechanical stress. The absence of these dental features in Qafzeh 9 is compensated by the presence of a thicker enamel, which helps in reducing the stress in the tooth crown.

A functional analysis of Carabelli trait in Australian aboriginal dentition.

OBJECTIVES: Carabelli is a nonmetric dental trait variably expressed as a small pit to a prominent cusp in the maxillary molars of modern humans. Investigations on the occurrence and expression rates of this trait have been conducted extensively, tracing its origin to genetic sources. However, there remains a lack of understanding about its potential role in chewing. In this study, we examine molar macrowear with the aim of reconstructing Carabelli trait occlusal dynamics occurring during chewing. METHODS: We have examined 96 deciduous and permanent maxillary molars of children and young adults from Yuendumu, an Australian Aboriginal population that was at an early stage of transition from a nomadic and hunter-gatherer way of life to a more settled existence. We apply a well-established method, called Occlusal Fingerprint Analysis, which is a digital approach for analyzing dental macrowear allowing the reconstruction of jaw movements required to produce wear pattern specific to each tooth. RESULTS: Carabelli trait slightly enlarges the surface functional area, especially in those molars where this feature is expressed in its cuspal form and it is closer to the occlusal plane. Moreover, the highly steep contact planes would also indicate that Carabelli wear areas contribute to increasing the shearing abilities of the occluded teeth, which are particularly important when processing fibrous and tough foods. CONCLUSIONS: The macrowear analysis suggests that Carabelli trait in the Aboriginal people from Yuendumu slightly enhanced occlusion and probably played some functional role during mastication. Future biomechanical and microwear analyses could provide additional information on the mechanical adaptation of Carabelli trait in modern human dentition.

Exploring late Paleolithic and Mesolithic diet in the Eastern Alpine region of Italy through multiple proxies.

OBJECTIVES: The analysis of prehistoric human dietary habits is key for understanding the effects of paleoenvironmental changes on the evolution of cultural and social human behaviors. In this study, we compare results from zooarchaeological, stable isotope and dental calculus analyses as well as lower second molar macrowear patterns to gain a broader understanding of the diet of three individuals who lived between the end of the Late Pleistocene and the Early Holocene (ca., 17-8 ky cal BP) in the Eastern Alpine region of Italy. MATERIALS AND METHODS: We analyze individuals buried at the sites of Riparo Tagliente (Verona), Riparo Villabruna, and Mondeval de Sora (Belluno). The three burials provide a unique dataset for diachronically exploring the influence of climatic changes on human subsistence strategies. RESULTS: Isotopic results indicate that all individuals likely relied on both terrestrial and freshwater animal proteins. Even though dental calculus analysis was, in part, hindered by the amount of mineral deposit available on the teeth, tooth macrowear study suggests that the dietary habits of the individuals included plant foods. Moreover, differences in macrowear patterns of lower second molars have been documented between Neanderthals and modern humans in the present sample, due to a prevalence of Buccal wear among the former as opposed to higher values of Lingual wear in modern human teeth. DISCUSSION: Isotopic analyses have emphasized the contribution of animal proteins in the diet of the three foragers from the Eastern Alpine region. The possible intake of carbohydrate-rich plant foods, suggested by the retrieval of plant remains in dental calculus, is supported by the signal of macrowear analysis. Moreover, the latter method indicates that the distribution of macrowear in lower second molars (M2 s) allows us to discriminate between Neanderthals and modern humans within the present reference sample. Overall, our results show these three prehistoric hunter-gatherers were well adapted to the environment in which they lived exploiting many natural resources.

Exploring directional and fluctuating asymmetry in the human palate during growth.

OBJECTIVES: Palate morphology is constantly changing throughout an individual's lifespan, yet its asymmetry during growth is still little understood. In this research, we focus on the study of palate morphology by using 3D geometric morphometric approaches to observe changes at different stages of life, and to quantify the impact of directional and fluctuating asymmetry on different areas at different growth stages. MATERIALS AND METHODS: The sample consists of 183 individuals (1-72 years) from two identified human skeletal collections of 19th and early 20th Century Italian contexts. A 3D-template of 41 (semi)landmarks was applied on digital palate models to observe morphological variation during growth. RESULTS: Asymmetrical components of the morphological structure appears multidirectional on the entire palate surface in individuals <2 years old and become oriented (opposite bilateral direction) between 2 and 6 years of age. Specifically, directional asymmetry differentially impacts palate morphology at different stages of growth. Both the anterior and posterior palate are affected by mild alterations in the first year of life, while between 2 and 6 years asymmetry is segregated in the anterior area, and moderate asymmetry affects the entire palatal surface up to 12 years of age. Our results show that stability of the masticatory system seems to be reached around 13-35 years first by females and then males. From 36 years on both sexes show similar asymmetry on the anterior area. Regarding fluctuating asymmetry, inter-individual variability is mostly visible up to 12 years of age, after which only directional trends can be clearly observed at a group level. DISCUSSION: Morphological structure appears instable during the first year of life and acquires an opposite asymmetric bilateral direction between 2 and 6 years of age. This condition has been also documented in adults; when paired with vertical alteration, anterior/posterior asymmetry seems to characterize palate morphology, which is probably due to mechanical factors during the lifespan. Fluctuating asymmetry is predominant in the first period of life due to a plausible relationship with the strength of morphological instability of the masticatory system. Directional asymmetry, on the other hand, shows that the patterning of group-level morphological change might be explained as a functional response to differential inputs (physiological forces, nutritive and non-nutritive habits, para-masticatory activity as well as the development of speech) in different growth stages. This research has implications with respect to medical and evolutionary fields. In medicine, palate morphology should be considered when planning orthodontic and surgical procedures as it could affect the outcome. As far as an evolutionary perspective is concerned the dominance of directional asymmetries in the masticatory system could provide information on dietary and cultural habits as well as pathological conditions in our ancestors.

The functional role of the Carabelli trait in early and late hominins.

The Carabelli trait is a dental feature that forms along the lingual margin of the protocone of deciduous and permanent maxillary molars. It is variably expressed, ranging from a small pit or furrow to a large cusp, and its development seems to be associated with crown size and molar cusp spatial configuration. The degree of expression of the Carabelli trait differs systematically between hominin taxa, and for this reason, it has been used extensively in the reconstruction of their phylogeny. However, the functional implications of having a large Carabelli trait remain unclear. In this study, we analyze the macrowear pattern of maxillary molars of early and late hominins using the occlusal fingerprint analysis method, an approach based on digital models of teeth that helps in reconstructing occlusal dynamics occurring during mastication. Tooth crowns with a small Carabelli cusp generally exhibit larger wear contact areas that extended cervically, while two additional new occlusal contact areas are common in teeth characterized by a large Carabelli cusp. These wear areas are created at the beginning of the chewing cycle, when occluding with the slopes of the lingual groove of the lower molars, between the metaconid and entoconid cusps. Advancing tooth wear leads to a slight enlargement of Carabelli occlusal contacts increasing their functional area. A steep inclination could be mechanically important in food reduction and in balancing the functional load distribution during mastication contacts. Steep wear areas are particularly developed in primates that process foods characterized by tough and fibrous textural properties. Future biomechanical and microwear texture analyses could provide additional information on the mechanical adaptation of this dental trait.

Morphometric analysis of the hominin talus: Evolutionary and functional implications.

The adoption of bipedalism is a key benchmark in human evolution that has impacted talar morphology. Here, we investigate talar morphological variability in extinct and extant hominins using a 3D geometric morphometric approach. The evolutionary timing and appearance of modern human-like features and their contributions to bipedal locomotion were evaluated on the talus as a whole, each articular facet separately, and multiple combinations of facets. Distinctive suites of features are consistently present in all fossil hominins, despite the presence of substantial interspecific variation, suggesting a potential connection of these suites to bipedal gait. A modern human-like condition evolved in navicular and lateral malleolar facets early in the hominin lineage compared with other facets, which demonstrate more complex morphological variation within Homininae. Interestingly, navicular facet morphology of Australopithecus afarensis is derived in the direction of Homo, whereas more recent hominin species such as Australopithecus africanus and Australopithecus sediba retain more primitive states in this facet. Combining the navicular facet with the trochlea and the posterior calcaneal facet as a functional suite, however, distinguishes Australopithecus from Homo in that the medial longitudinal arch had not fully developed in the former. Our results suggest that a more everted foot and stiffer medial midtarsal region are adaptations that coincide with the emergence of bipedalism, whereas a high medial longitudinal arch emerges later in time, within Homo. This study provides novel insights into the emergence of talar morphological traits linked to bipedalism and its transition from a facultative to an obligate condition.

The influence of mobility strategy on the modern human talus.

OBJECTIVES: The primate talus is known to have a shape that varies according to differences in locomotion and substrate use. While the modern human talus is morphologically specialized for bipedal walking, relatively little is known on how its morphology varies in relation to cultural and environmental differences across time. Here we compare tali of modern human populations with different subsistence economies and lifestyles to explore how cultural practices and environmental factors influence external talar shape. MATERIALS AND METHODS: The sample consists of digital models of 142 tali from 11 archaeological and post-industrial modern human groups. Talar morphology was investigated through 3D (semi)landmark based geometric morphometric methods. RESULTS: Our results show distinct differences between highly mobile hunter-gatherers and more sedentary groups belonging to a mixed post-agricultural/industrial background. Hunter-gatherers exhibit a more "flexible" talar shape, everted posture, and a more robust and medially oriented talar neck/head, which we interpret as reflecting long-distance walking strictly performed barefoot, or wearing minimalistic footwear, along uneven ground. The talus of the post-industrial population exhibits a "stable" profile, neutral posture, and a less robust and orthogonally oriented talar neck/head, which we interpret as a consequence of sedentary lifestyle and use of stiff footwear. DISCUSSION: We suggest that talar morphological variation is related to the adoption of constraining footwear in post-industrial society, which reduces ankle range of motion. This contrasts with hunter-gatherers, where talar shape shows a more flexible profile, likely resulting from a lack of footwear while traversing uneven terrain. We conclude that modern human tali vary with differences in locomotor and cultural behavior.

Dental macrowear and cortical bone distribution of the Neanderthal mandible from Regourdou (Dordogne, Southwestern France).

Tooth wear is an important feature for reconstructing diet, food processing and cultural habits of past human populations. In particular, occlusal wear facets can be extremely useful for detecting information about diet and non-masticatory behaviors. The aim of this study is to reconstruct the diet and cultural behavior of the Neanderthal specimen Regourdou 1 (Dordogne, Southern France) from the analysis of the macrowear pattern, using the occlusal fingerprint analysis method. In addition, we have also examined whether there is any association between the observed dental macrowear and mandibular bone distribution and root dentine thickness. The posterior dentition of Regourdou 1 is characterized by an asymmetric wear pattern, with the right side significantly more worn than the left. In contrast, the left lower P3 shows a more advanced wear than the right premolar, with unusual semicircular enamel wear facets. The results from occlusal fingerprint analysis of this unique pattern suggest tooth-tool uses for daily task activities. Moreover, the left buccal aspect of the mandibular cortical bone is thicker than its right counterpart, and the left P3 has a thicker radicular dentine layer than its antimere. These results show a certain degree of asymmetry in cortical bone topography and dentine tissue that could be associated with the observed dental macrowear pattern. The molar macrowear pattern also suggests that Regourdou 1 had a mixed diet typical of those populations living in temperate deciduous woodlands and Mediterranean habitats, including animal and plant foods. Although this study is limited to one Neanderthal individual, future analyses based on a larger sample may further assist us to better understand the existing relationship between mandibular architecture, occlusal wear and the masticatory apparatus in humans.

Computer simulations show that Neanderthal facial morphology represents adaptation to cold and high energy demands, but not heavy biting.

Three adaptive hypotheses have been forwarded to explain the distinctive Neanderthal face: (i) an improved ability to accommodate high anterior bite forces, (ii) more effective conditioning of cold and/or dry air and, (iii) adaptation to facilitate greater ventilatory demands. We test these hypotheses using three-dimensional models of Neanderthals, modern humans, and a close outgroup (Homo heidelbergensis), applying finite-element analysis (FEA) and computational fluid dynamics (CFD). This is the most comprehensive application of either approach applied to date and the first to include both. FEA reveals few differences between H. heidelbergensis, modern humans, and Neanderthals in their capacities to sustain high anterior tooth loadings. CFD shows that the nasal cavities of Neanderthals and especially modern humans condition air more efficiently than does that of H. heidelbergensis, suggesting that both evolved to better withstand cold and/or dry climates than less derived Homo We further find that Neanderthals could move considerably more air through the nasal pathway than could H. heidelbergensis or modern humans, consistent with the propositions that, relative to our outgroup Homo, Neanderthal facial morphology evolved to reflect improved capacities to better condition cold, dry air, and, to move greater air volumes in response to higher energetic requirements.

Technical note: The use of 3D printing in dental anthropology collections.

OBJECTIVES: Rapid prototyping (RP) technology is becoming more affordable, faster, and is now capable of building models with a high resolution and accuracy. Due to technological limitations, 3D printing in biological anthropology has been mostly limited to museum displays and forensic reconstructions. In this study, we compared the accuracy of different 3D printers to establish whether RP can be used effectively to reproduce anthropological dental collections, potentially replacing access to oftentimes fragile and irreplaceable original material. METHODS: We digitized specimens from the Yuendumu collection of Australian Aboriginal dental casts using a high-resolution white-light scanning system and reproduced them using four different 3D printing technologies: stereolithography (SLA); fused deposition modeling (FDM); binder-jetting; and material-jetting. We compared the deviations between the original 3D surface models with 3D print scans using color maps generated from a 3D metric deviation analysis. RESULTS: The 3D printed models reproduced both the detail and discrete morphology of the scanned dental casts. The results of the metric deviation analysis demonstrate that all 3D print models were accurate, with only a few small areas of high deviations. The material-jetting and SLA printers were found to perform better than the other two printing machines. CONCLUSIONS: The quality of current commercial 3D printers has reached a good level of accuracy and detail reproduction. However, the costs and printing times limit its application to produce large sample numbers for use in most anthropological studies. Nonetheless, RP offers a viable option to preserve numerically constraint fragile skeletal and dental material in paleoanthropological collections.

The physiological linkage between molar inclination and dental macrowear pattern.

OBJECTIVES: Exact symmetry and perfect balance between opposite jaw halves, as well as between antagonistic teeth, is not frequently observed in natural masticatory systems. Research results show that asymmetry in our body, skull, and jaws is often related to genetic, epigenetic, environmental and individual ontogenetic factors. Our study aims to provide evidence for a significant link between masticatory asymmetry and occlusal contact between antagonist teeth by testing the hypothesis that tooth inclination is one of the mechanisms driving distribution of wear in masticatory phases in addition to dietary and cultural habits. MATERIALS AND METHODS: The present work investigates the relationship between dental macrowear patterns and tooth inclinations on a sample of complete maxillary and mandibular 3D models of dental arches from 19 young and adult Yuendumu Aboriginal individuals. The analysis was carried out on first molars (M1) from all quadrants. Occlusal Fingerprint Analysis was used for the quantification of macrowear patterns, and 2D cross-sectional geometric analysis was carried out to investigate asymmetry in dental arches. RESULTS: The asymmetry is highly variable on both arches, and it is associated with differences in the inclination of upper M1 crowns. Each molar has variable inclination (buccal/lingual) which influence tooth to tooth contact, producing greater or lesser variation in wear pattern. Interindividual variability of morphological variation of the occlusal relationship has to be considered in macrowear analysis. DISCUSSION: Our results suggest that overall asymmetry in the masticatory apparatus in modern humans affects occlusal contact areas between antagonist teeth influencing macrowear and chewing efficiency during ontogeny.

Cranial shape variation in adult howler monkeys (Alouatta seniculus).

Howler monkeys (genus Alouatta) display a distinctive cranial architecture characterized by airorhynchy (or retroflexion of the facial skeleton on the cranial base), a small braincase, and a posteriorly oriented foramen magnum. This configuration has been associated with distinct factors including a high folivory diet, locomotion, and the presence of a specialized vocal tract characterized by large hyoid bone. However, the morphological relationships between the facial and neurocranial blocks in Alouatta have been scarcely investigated. In this study we quantitatively analyzed the cranial shape variation in Alouatta seniculus, to evaluate possible influences and constraints in face and braincase associated with airorhynchy. We also considered the structural role of the pteric area within the cranial functional matrix. We applied landmark-based analysis and multivariate statistics to 31 adult crania, computing shape analyses based on 3D coordinates registration as well as the analysis of the Euclidean distance matrix to investigate patterns of intraspecific morphological variability. Our results suggest that allometry is the main source of variation involved in shaping cranial morphology in howlers, influencing the degree of facial proportions and braincase flattening, and generating the main sexual differences. Larger individuals are characterized by a higher degree of airorhynchy, neurocranial flattening, and expansion of the zygomatic arch. Allometric variations influence the skull as a whole, without distinct patterns for face and braincase, which behave as an integrated morphological unit. A preliminary survey on the pteric pattern suggests that the morphology of this area may be the result of variations in the vertical growth rates between face and braincase. Future studies should be dedicated to the ontogenetic series and focus on airorhynchy in terms of differential growth among distinct cranial districts.

Tooth Wear Inclination in Great Ape Molars.

Primate dietary diversity is reflected in their dental morphology, with differences in size and shape of teeth. In particular, the tooth wear angle can provide insight into a species' ability to break down certain foods. To examine dietary and masticatory information, digitized polygon models of dental casts provide a basis for quantitative analysis of wear associated with tooth attrition. In this study, we analyze and compare the wear patterns of Pongo pygmaeus, Gorilla gorillagorilla and Pan troglodytes schweinfurthii lower molars, focusing on the degree of inclination of specific wear facets. The variation in wear angles appears to be indicative of jaw movements and the specific stresses imposed on food during mastication, reflecting thus the ecology of these species. Orangutans exhibit flatter wear angles, more typical of a diet consisting of hard and brittle foods, while gorillas show a wear pattern with a high degree of inclination, reflecting thus their more leafy diet. Chimpanzees, on the other hand, show intermediate inclinations, a pattern that could be related to their highly variable diet. This method is demonstrated to be a powerful tool for better understanding the relationship between food, mastication and tooth wear processes in living primates, and can be potentially used to reconstruct the diet of fossil species.

To meat or not to meat? New perspectives on Neanderthal ecology.

Neanderthals have been commonly depicted as top predators who met their nutritional needs by focusing entirely on meat. This information mostly derives from faunal assemblage analyses and stable isotope studies: methods that tend to underestimate plant consumption and overestimate the intake of animal proteins. Several studies in fact demonstrate that there is a physiological limit to the amount of animal proteins that can be consumed: exceeding these values causes protein toxicity that can be particularly dangerous to pregnant women and newborns. Consequently, to avoid food poisoning from meat-based diets, Neanderthals must have incorporated alternative food sources in their daily diets, including plant materials as well.

Efficient complete denture metal base design via a dental feature-driven segmentation network.

BACKGROUND AND OBJECTIVE: Complete denture is a common restorative treatment in dental patients and the design of the core components (major connector and retentive mesh) of complete denture metal base (CDMB) is the basis of successful restoration. However, the automated design process of CDMB has become a challenging task primarily due to the complexity of manual interaction, low personalization, and low design accuracy. METHODS: To solve the existing problems, we develop a computer-aided Segmentation Network-driven CDMB design framework, called CDMB-SegNet, to automatically generate personalized digital design boundaries for complete dentures of edentulous patients. Specifically, CDMB-SegNet consists of a novel upright-orientation adjustment module (UO-AM), a dental feature-driven segmentation network, and a specific boundary-optimization design module (BO-DM). UO-AM automatically identifies key points for locating spatial attitude of the three-dimensional dental model with arbitrary posture, while BO-DM can result in smoother and more personalized designs for complete denture. In addition, to achieve efficient and accurate feature extraction and segmentation of 3D edentulous models with irregular gingival tissues, the light-weight backbone network is also incorporated into CDMB-SegNet. RESULTS: Experimental results on a large clinical dataset showed that CDMB-SegNet can achieve superior performance over the state-of-the-art methods. Quantitative evaluation (major connector/retentive mesh) showed improved Accuracy (98.54 ± 0.58 %/97.73 ± 0.92 %) and IoU (87.42 ± 5.48 %/70.42 ± 7.95 %), and reduced Maximum Symmetric Surface Distance (4.54 ± 2.06 mm/4.62 ± 1.68 mm), Average Symmetric Surface Distance (1.45 ± 0.63mm/1.28 ± 0.54 mm), Roughness Rate (6.17 ± 1.40 %/6.80 ± 1.23 %) and Vertices Number (23.22 ± 1.85/43.15 ± 2.72). Moreover, CDMB-SegNet shortened the overall design time to around 4 min, which is one tenth of the comparison methods. CONCLUSIONS: CDMB-SegNet is the first intelligent neural network for automatic CDMB design driven by oral big data and dental features. The designed CDMB is able to couple with patient's personalized dental anatomical morphology, providing higher clinical applicability compared with the state-of-the-art methods.

Masticatory habits of the adult Neanderthal individual BD 1 from La Chaise-de-Vouthon (France).

OBJECTIVES: The analysis of dental wear provides a useful approach for dietary and cultural habit reconstructions of past human populations. The analysis of macrowear patterns can also be used to better understand the individual chewing behavior and to investigate the biomechanical responses during different biting scenarios. The aim of this study is to evaluate the diet and chewing performance of the adult Neanderthal Bourgeois-Delaunay 1 (BD 1) and to investigate the relationship between wear and cementum deposition under mechanical demands. MATERIALS AND METHODS: The macrowear pattern of BD 1 was analyzed using the occlusal fingerprint analysis method. We propose a new method for the bilateral measurement of the cementum volume along both buccal and lingual sides of the molar root. RESULTS: BD 1's anterior dentition is more affected by wear compared to the posterior one. The macrowear pattern suggest a normal chewing behavior and a mixed-diet coming from temperate environments. The teeth on the left side of the mandible display greater levels of wear, as well as the buccal side of the molar crowns. The cementum analysis shows higher buccal volume along the molar roots. DISCUSSION: BD1 could have been preferably chewing on the left side of the mandible. The exploitation of various food resources suggested by the macrowear analysis is compatible with the environmental reconstructions. Finally, the greater wear on the buccal side of the molar occlusal surface and the greater volume of cementum in that side of the molar roots offers a preliminary understanding about the potential correlation between dental wear and cementum deposition.

New Neanderthal remains from Mani peninsula, Southern Greece: the Kalamakia Middle Paleolithic cave site.

The Kalamakia cave, a Middle Paleolithic site on the western coast of the Mani peninsula, Greece, was excavated in 1993-2006 by an interdisciplinary team from the Ephoreia of Paleoanthropology and Speleology (Greek Ministry of Culture) and the Muséum national d'Histoire naturelle (Paris). The site is dated to between ca. 100,000 and >39,000 years BP (Before Present) and has yielded Mousterian lithics, a rich fauna, and human remains from several layers. The latter include 10 isolated teeth, a cranial fragment and three postcranial elements. The remains represent at least eight individuals, two of them subadults, and show both carnivore and anthropogenic modifications. They can be identified as Neanderthal on the basis of diagnostic morphology on most specimens. A diet similar to that of Neanderthals from mixed habitat is suggested by our analysis of dental wear (occlusal fingerprint analysis) and microwear (occlusal texture microwear analysis), in agreement with the faunal and palynological analyses of the site. These new fossils significantly expand the Neanderthal sample known from Greece. Together with the human specimens from Lakonis and Apidima, the Kalamakia human remains add to the growing evidence of a strong Neanderthal presence in the Mani region during the Late Pleistocene.

Dental wear and cultural behavior in Middle Paleolithic humans from the Near East.

Neanderthals and anatomically modern humans (AMHs) may have lived in close proximity in the Near East region during Middle Paleolithic times. Although functional morphological analyses suggest a marked behavioral contrast between these two human groups, new dental micro- and macro-wear studies, together with new archaeological data, have revealed some similarities in ecology and dietary habits. In this study, we analyze the tooth wear patterns of Neanderthals and AMH from Middle Paleolithic sites of Israel and Northern Iraq, using the Occlusal Fingerprint Analysis (OFA) method to virtually reconstruct the jaw movements responsible for the creation of the occlusal wear areas. We particularly focus on para-facets, a distinctive type of wear which has been previously described in the dentition of historic and modern hunter-gatherers. The analysis reveals a similarity in para-facet frequency between early Near Eastern Neanderthals and AMH, and a significant difference with other Pleistocene human groups. The absence of antagonist occlusal contacts in the lower teeth and the occlusal compass analysis suggest that para-facet formation is not related to normal mastication but to nonmasticatory activities. Thus, the identification of these nonmasticatory wear areas on the molars of early Near Eastern Neanderthals and AMH may indicate analogous tooth-tool uses for daily task activities. These may have emerged independently or could be interpreted as indirect evidence of cultural interactions between these two groups.