Specificity of polysaccharide use in intestinal bacteroides species determines diet-induced microbiota alterations.

The intestinal microbiota impacts many facets of human health and is associated with human diseases. Diet impacts microbiota composition, yet mechanisms that link dietary changes to microbiota alterations remain ill-defined. Here we elucidate the basis of Bacteroides proliferation in response to fructans, a class of fructose-based dietary polysaccharides. Structural and genetic analysis disclosed a fructose-binding, hybrid two-component signaling sensor that controls the fructan utilization locus in Bacteroides thetaiotaomicron. Gene content of this locus differs among Bacteroides species and dictates the specificity and breadth of utilizable fructans. BT1760, an extracellular beta2-6 endo-fructanase, distinguishes B. thetaiotaomicron genetically and functionally, and enables the use of the beta2-6-linked fructan levan. The genetic and functional differences between Bacteroides species are predictive of in vivo competitiveness in the presence of dietary fructans. Gene sequences that distinguish species' metabolic capacity serve as potential biomarkers in microbiomic datasets to enable rational manipulation of the microbiota via diet.

Structural basis for nutrient acquisition by dominant members of the human gut microbiota.

The human large intestine is populated by a high density of microorganisms, collectively termed the colonic microbiota, which has an important role in human health and nutrition. The survival of microbiota members from the dominant Gram-negative phylum Bacteroidetes depends on their ability to degrade dietary glycans that cannot be metabolized by the host. The genes encoding proteins involved in the degradation of specific glycans are organized into co-regulated polysaccharide utilization loci, with the archetypal locus sus (for starch utilisation system) encoding seven proteins, SusA-SusG. Glycan degradation mainly occurs intracellularly and depends on the import of oligosaccharides by an outer membrane protein complex composed of an extracellular SusD-like lipoprotein and an integral membrane SusC-like TonB-dependent transporter. The presence of the partner SusD-like lipoprotein is the major feature that distinguishes SusC-like proteins from previously characterized TonB-dependent transporters. Many sequenced gut Bacteroides spp. encode over 100 SusCD pairs, of which the majority have unknown functions and substrate specificities. The mechanism by which extracellular substrate binding by SusD proteins is coupled to outer membrane passage through their cognate SusC transporter is unknown. Here we present X-ray crystal structures of two functionally distinct SusCD complexes purified from Bacteroides thetaiotaomicron and derive a general model for substrate translocation. The SusC transporters form homodimers, with each ß-barrel protomer tightly capped by SusD. Ligands are bound at the SusC-SusD interface in a large solvent-excluded cavity. Molecular dynamics simulations and single-channel electrophysiology reveal a 'pedal bin' mechanism, in which SusD moves away from SusC in a hinge-like fashion in the absence of ligand to expose the substrate-binding site to the extracellular milieu. These data provide mechanistic insights into outer membrane nutrient import by members of the microbiota, an area of major importance for understanding human-microbiota symbiosis.

How members of the human gut microbiota overcome the sulfation problem posed by glycosaminoglycans.

The human microbiota, which plays an important role in health and disease, uses complex carbohydrates as a major source of nutrients. Utilization hierarchy indicates that the host glycosaminoglycans heparin (Hep) and heparan sulfate (HS) are high-priority carbohydrates for Bacteroides thetaiotaomicron, a prominent member of the human microbiota. The sulfation patterns of these glycosaminoglycans are highly variable, which presents a significant enzymatic challenge to the polysaccharide lyases and sulfatases that mediate degradation. It is possible that the bacterium recruits lyases with highly plastic specificities and expresses a repertoire of enzymes that target substructures of the glycosaminoglycans with variable sulfation or that the glycans are desulfated before cleavage by the lyases. To distinguish between these mechanisms, the components of the B. thetaiotaomicron Hep/HS degrading apparatus were analyzed. The data showed that the bacterium expressed a single-surface endo-acting lyase that cleaved HS, reflecting its higher molecular weight compared with Hep. Both Hep and HS oligosaccharides imported into the periplasm were degraded by a repertoire of lyases, with each enzyme displaying specificity for substructures within these glycosaminoglycans that display a different degree of sulfation. Furthermore, the crystal structures of a key surface glycan binding protein, which is able to bind both Hep and HS, and periplasmic sulfatases reveal the major specificity determinants for these proteins. The locus described here is highly conserved within the human gut Bacteroides, indicating that the model developed is of generic relevance to this important microbial community.

A scissor blade-like closing mechanism implicated in transmembrane signaling in a Bacteroides hybrid two-component system.

Signaling across the membrane in response to extracellular stimuli is essential for survival of all cells. In bacteria, responses to environmental changes are predominantly mediated by two-component systems, which are typically composed of a membrane-spanning sensor histidine kinase and a cytoplasmic response regulator. In the human gut symbiont Bacteroides thetaiotaomicron, hybrid two-component systems are a key part of the bacterium's ability to sense and degrade complex carbohydrates in the gut. Here, we identify the activating ligand of the hybrid two-component system, BT4663, which controls heparin and heparan sulfate acquisition and degradation in this prominent gut microbe, and report the crystal structure of the extracellular sensor domain in both apo and ligand-bound forms. Current models for signal transduction across the membrane involve either a piston-like or rotational displacement of the transmembrane helices to modulate activity of the linked cytoplasmic kinases. The structures of the BT4663 sensor domain reveal a significant conformational change in the homodimer on ligand binding, which results in a scissor-like closing of the C-termini of each protomer. We propose this movement activates the attached intracellular kinase domains and represents an allosteric mechanism for bacterial transmembrane signaling distinct from previously described models, thus expanding our understanding of signal transduction across the membrane, a fundamental requirement in many important biological processes.

Variations in methanobactin structure influences copper utilization by methane-oxidizing bacteria.

Methane-oxidizing bacteria are nature's primary biological mechanism for suppressing atmospheric levels of the second-most important greenhouse gas via methane monooxygenases (MMOs). The copper-containing particulate enzyme is the most widespread and efficient MMO. Under low-copper conditions methane-oxidizing bacteria secrete the small copper-binding peptide methanobactin (mbtin) to acquire copper, but how variations in the structures of mbtins influence copper metabolism and species selection are unknown. Methanobactins have been isolated from Methylocystis strains M and hirsuta CSC1, organisms that can switch to using an iron-containing soluble MMO when copper is limiting, and the nonswitchover Methylocystis rosea. These mbtins are shorter, and have different amino acid compositions, than the characterized mbtin from Methylosinus trichosporium OB3b. A coordinating pyrazinedione ring in the Methylocystis mbtins has little influence on the Cu(I) site structure. The Methylocystis mbtins have a sulfate group that helps stabilize the Cu(I) forms, resulting in affinities of approximately 10(21) M(-1). The Cu(II) affinities vary over three orders of magnitude with reduction potentials covering approximately 250 mV, which may dictate the mechanism of intracellular copper release. Copper uptake and the switchover from using the iron-containing soluble MMO to the copper-containing particulate enzyme is faster when mediated by the native mbtin, suggesting that the amino acid sequence is important for the interaction of mbtins with receptors. The differences in structures and properties of mbtins, and their influence on copper utilization by methane-oxidizing bacteria, have important implications for the ecology and global function of these environmentally vital organisms.

Protein-folding location can regulate manganese-binding versus copper- or zinc-binding.

Metals are needed by at least one-quarter of all proteins. Although metallochaperones insert the correct metal into some proteins, they have not been found for the vast majority, and the view is that most metalloproteins acquire their metals directly from cellular pools. However, some metals form more stable complexes with proteins than do others. For instance, as described in the Irving-Williams series, Cu(2+) and Zn(2+) typically form more stable complexes than Mn(2+). Thus it is unclear what cellular mechanisms manage metal acquisition by most nascent proteins. To investigate this question, we identified the most abundant Cu(2+)-protein, CucA (Cu(2+)-cupin A), and the most abundant Mn(2+)-protein, MncA (Mn(2+)-cupin A), in the periplasm of the cyanobacterium Synechocystis PCC 6803. Each of these newly identified proteins binds its respective metal via identical ligands within a cupin fold. Consistent with the Irving-Williams series, MncA only binds Mn(2+) after folding in solutions containing at least a 10(4) times molar excess of Mn(2+) over Cu(2+) or Zn(2+). However once MncA has bound Mn(2+), the metal does not exchange with Cu(2+). MncA and CucA have signal peptides for different export pathways into the periplasm, Tat and Sec respectively. Export by the Tat pathway allows MncA to fold in the cytoplasm, which contains only tightly bound copper or Zn(2+) (refs 10-12) but micromolar Mn(2+) (ref. 13). In contrast, CucA folds in the periplasm to acquire Cu(2+). These results reveal a mechanism whereby the compartment in which a protein folds overrides its binding preference to control its metal content. They explain why the cytoplasm must contain only tightly bound and buffered copper and Zn(2+).

Investigating the role of zinc and copper binding motifs of trafficking sites in the cyanobacterium Synechocystis PCC 6803.

Although zinc and copper are required by proteins with very different functions, these metals can be delivered to cellular locations by homologous metal transporters within the same organism, as demonstrated by the cyanobacterial ( Synechocystis PCC 6803) zinc exporter ZiaA and thylakoidal copper importer PacS. The N-terminal metal-binding domains of these transporters (ZiaAN and PacSN, respectively) have related ferredoxin folds also found in the metallochaperone Atx1, which delivers copper to PacS, but differ in the residues found in their M/IXCXXC metal-binding motifs. To investigate the role of the nonconserved residues in this region on metal binding, the sequence from ZiaAN has been introduced into Atx1 and PacSN, and the motifs of Atx1 and PacSN swapped. The motif sequence can tune Cu(I) affinity only approximately 3-fold. However, the introduction of the ZiaAN motif (MDCTSC) dramatically increases the Zn(II) affinity of both Atx1 and PacSN by up to 2 orders of magnitude. The Atx1 mutant with the ZiaAN motif crystallizes as a side-to-side homodimer very similar to that found for [Cu(I)2-Atx1]2 ( Badarau et al. Biochemistry 2010 , 49 , 7798 ). In a crystal structure of the PacSN mutant possessing the ZiaAN motif (PacSN(ZiaAN)), the Asp residue from the metal-binding motif coordinates Zn(II). This demonstrates that the increased Zn(II) affinity of this variant and the high Zn(II) affinity of ZiaAN are due to the ability of the carboxylate to ligate this metal ion. Comparison of the Zn(II) sites in PacSN(ZiaAN) structures provides additional insight into Zn(II) trafficking in cyanobacteria.

Structure and function of an arabinoxylan-specific xylanase.

The enzymatic degradation of plant cell walls plays a central role in the carbon cycle and is of increasing environmental and industrial significance. The enzymes that catalyze this process include xylanases that degrade xylan, a ß-1,4-xylose polymer that is decorated with various sugars. Although xylanases efficiently hydrolyze unsubstituted xylans, these enzymes are unable to access highly decorated forms of the polysaccharide, such as arabinoxylans that contain arabinofuranose decorations. Here, we show that a Clostridium thermocellum enzyme, designated CtXyl5A, hydrolyzes arabinoxylans but does not attack unsubstituted xylans. Analysis of the reaction products generated by CtXyl5A showed that all the oligosaccharides contain an O3 arabinose linked to the reducing end xylose. The crystal structure of the catalytic module (CtGH5) of CtXyl5A, appended to a family 6 noncatalytic carbohydrate-binding module (CtCBM6), showed that CtGH5 displays a canonical (α/ß)(8)-barrel fold with the substrate binding cleft running along the surface of the protein. The catalytic apparatus is housed in the center of the cleft. Adjacent to the -1 subsite is a pocket that could accommodate an l-arabinofuranose-linked α-1,3 to the active site xylose, which is likely to function as a key specificity determinant. CtCBM6, which adopts a ß-sandwich fold, recognizes the termini of xylo- and gluco-configured oligosaccharides, consistent with the pocket topology displayed by the ligand-binding site. In contrast to typical modular glycoside hydrolases, there is an extensive hydrophobic interface between CtGH5 and CtCBM6, and thus the two modules cannot function as independent entities.

Evidence that family 35 carbohydrate binding modules display conserved specificity but divergent function.

Enzymes that hydrolyze complex carbohydrates play important roles in numerous biological processes that result in the maintenance of marine and terrestrial life. These enzymes often contain noncatalytic carbohydrate binding modules (CBMs) that have important substrate-targeting functions. In general, there is a tight correlation between the ligands recognized by bacterial CBMs and the substrate specificity of the appended catalytic modules. Through high-resolution structural studies, we demonstrate that the architecture of the ligand binding sites of 4 distinct family 35 CBMs (CBM35s), appended to 3 plant cell wall hydrolases and the exo-beta-D-glucosaminidase CsxA, which contributes to the detoxification and metabolism of an antibacterial fungal polysaccharide, is highly conserved and imparts specificity for glucuronic acid and/or Delta4,5-anhydrogalaturonic acid (Delta4,5-GalA). Delta4,5-GalA is released from pectin by the action of pectate lyases and as such acts as a signature molecule for plant cell wall degradation. Thus, the CBM35s appended to the 3 plant cell wall hydrolases, rather than targeting the substrates of the cognate catalytic modules, direct their appended enzymes to regions of the plant that are being actively degraded. Significantly, the CBM35 component of CsxA anchors the enzyme to the bacterial cell wall via its capacity to bind uronic acid sugars. This latter observation reveals an unusual mechanism for bacterial cell wall enzyme attachment. This report shows that the biological role of CBM35s is not dictated solely by their carbohydrate specificities but also by the context of their target ligands.

Structure and metal loading of a soluble periplasm cuproprotein.

A copper-trafficking pathway was found to enable Cu(2+) occupancy of a soluble periplasm protein, CucA, even when competing Zn(2+) is abundant in the periplasm. Here, we solved the structure of CucA (a new cupin) and found that binding of Cu(2+), but not Zn(2+), quenches the fluorescence of Trp(165), which is adjacent to the metal site. Using this fluorescence probe, we established that CucA becomes partly occupied by Zn(2+) following exposure to equimolar Zn(2+) and Cu(2+). Cu(2+)-CucA is more thermodynamically stable than Zn(2+)-CucA but k((Zn→Cu)exchange) is slow, raising questions about how the periplasm contains solely the Cu(2+) form. We discovered that a copper-trafficking pathway involving two copper transporters (CtaA and PacS) and a metallochaperone (Atx1) is obligatory for Cu(2+)-CucA to accumulate in the periplasm. There was negligible CucA protein in the periplasm of ΔctaA cells, but the abundance of cucA transcripts was unaltered. Crucially, ΔctaA cells overaccumulate low M(r) copper complexes in the periplasm, and purified apoCucA can readily acquire Cu(2+) from ΔctaA periplasm extracts, but in vivo apoCucA fails to come into contact with these periplasmic copper pools. Instead, copper traffics via a cytoplasmic pathway that is coupled to CucA translocation to the periplasm.

Copper-binding properties and structures of methanobactins from Methylosinus trichosporium OB3b.

Methanobactins (mbs) are a class of copper-binding peptides produced by aerobic methane oxidizing bacteria (methanotrophs) that have been linked to the substantial copper needs of these environmentally important microorganisms. The only characterized mbs are those from Methylosinus trichosporium OB3b and Methylocystis strain SB2. M. trichosporium OB3b produces a second mb (mb-Met), which is missing the C-terminal Met residue from the full-length form (FL-mb). The as-isolated copper-loaded mbs bind Cu(I). The absence of the Met has little influence on the structure of the Cu(I) site, and both molecules mediate switchover from the soluble iron methane mono-oxygenase to the particulate copper-containing enzyme in M. trichosporium OB3b cells. Cu(II) is reduced in the presence of the mbs under our experimental conditions, and the disulfide plays no role in this process. The Cu(I) affinities of these molecules are extremely high with values of (6-7) × 10(20) M(-1) determined at pH ≥ 8.0. The affinity for Cu(I) is 1 order of magnitude lower at pH 6.0. The reduction potentials of copper-loaded FL-mb and mb-Met are 640 and 590 mV respectively, highlighting the strong preference for Cu(I) and indicating different Cu(II) affinities for the two forms. Cleavage of the disulfide bridge results in a decrease in the Cu(I) affinity to ∼9 × 10(18) M(-1) at pH 7.5. The two thiolates can also bind Cu(I), albeit with much lower affinity (∼ 3 × 10(15) M(-1) at pH 7.5). The high affinity of mbs for Cu(I) is consistent with a physiological role in copper uptake and protection.

Visualizing the metal-binding versatility of copper trafficking sites .

Molecular systems have evolved to permit the safe delivery of copper. Despite extensive studies, many copper site structures involved in copper homeostasis, even for the well-studied metallochaperone Atx1, remain unresolved. Cyanobacteria import copper to their thylakoid compartments for use in photosynthesis and respiration and possess an Atx1 that we show can adopt multiple oligomeric states when metalated, capable of binding up to four copper ions. Two-copper- and four-copper-loaded dimers exist in solution at low micromolar concentrations, and head-to-head and side-to-side arrangements, respectively, can be crystallized, with the latter binding a [Cu(4){mu(2)-S(gamma)(Cys)}(4)Cl(2)](2-) cluster. The His61Tyr mutation on loop 5 weakens head-to-head dimerization, yet a side-to-side dimer binding a similar cluster as in the wild-type protein, but with phenolate coordination, is present. The cognate metal-binding domains (MBDs) of the P-type ATPases CtaA and PacS, which are proposed to donate copper to and accept copper from Atx1, respectively, are monomeric in the presence of copper. The structure of the MBD of Cu(I)-PacS shows a crystallographic trimer arrangement around a [Cu(3){mu(2)-S(gamma)(Cys)}(3){S(gamma)(Cys)}(3)](2-) cluster that is very similar to that found for an alternate form of the His61Tyr Atx1 mutant. Copper transfer from the MBD of CtaA to Atx1 is favorable, but delivery from Atx1 to the MBD of PacS is strongly dependent upon the dimeric form of Atx1. A copper-induced switch in Atx1 dimer structure may have a regulatory role with cluster formation helping to buffer copper.

Probing the interaction of archaeal DNA polymerases with deaminated bases using X-ray crystallography and non-hydrogen bonding isosteric base analogues.

Archaeal family-B DNA polymerases stall replication on encountering the pro-mutagenic bases uracil and hypoxanthine. This publication describes an X-ray crystal structure of Thermococcus gorgonarius polymerase in complex with a DNA containing hypoxanthine in the single-stranded region of the template, two bases ahead of the primer-template junction. Full details of the specific recognition of hypoxanthine are revealed, allowing a comparison with published data that describe uracil binding. The two bases are recognized by the same pocket, in the N-terminal domain, and make very similar protein-DNA interactions. Specificity for hypoxanthine (and uracil) arises from a combination of polymerase-base hydrogen bonds and shape fit between the deaminated bases and the pocket. The structure with hypoxanthine at position 2 explains the stimulation of the polymerase 3'-5' proofreading exonuclease, observed with deaminated bases at this location. A beta-hairpin element, involved in partitioning the primer strand between the polymerase and exonuclease active sites, inserts between the two template bases at the extreme end of the double-stranded DNA. This denatures the two complementary primer bases and directs the resulting 3' single-stranded extension toward the exonuclease active site. Finally, the relative importance of hydrogen bonding and shape fit in determining selectivity for deaminated bases has been examined using nonpolar isosteres. Affinity for both 2,4-difluorobenzene and fluorobenzimidazole, non-hydrogen bonding shape mimics of uracil and hypoxanthine, respectively, is strongly diminished, suggesting polar protein-base contacts are important. However, residual interaction with 2,4-difluorobenzene is seen, confirming a role for shape recognition.

Regulation of protein function: crystal packing interfaces and conformational dimerization.

The accepted view of interprotein electron transport involves molecules diffusing between donor and acceptor redox sites. An emerging alternative hypothesis is that efficient long-range electron transport can be achieved through proteins arranged in supramolecular assemblies. In this study, we have investigated the crystal packing interfaces in three crystal forms of plastocyanin, an integral component of the photosynthetic electron transport chain, and discuss their potential relevance to in vivo supramolecular assemblies. Symmetry-related protein chains within these crystals have Cu-Cu separations of <25 A, a distance that readily supports electron transfer. In one structure, the plastocyanin molecule exists in two forms in which a backbone displacement coupled with side chain rearrangements enables the modulation of protein-protein interfaces.

Cross-link formation of the cysteine 228-tyrosine 272 catalytic cofactor of galactose oxidase does not require dioxygen.

Galactose oxidase (GO) belongs to a class of proteins that self-catalyze assembly of their redox-active cofactors from active site amino acids. Generation of enzymatically active GO appears to require at least four sequential post-translational modifications: cleavage of a secretion signal sequence, copper-dependent cleavage of an N-terminal pro sequence, copper-dependent formation of a C228-Y272 thioether bond, and generation of the Y272 radical. The last two processes were investigated using a truncated protein (termed premat-GO) lacking the pro sequence and purified under copper-free conditions. Reactions of premat-GO with Cu(II) were investigated using optical, EPR, and resonance Raman spectroscopy, SDS-PAGE, and X-ray crystallography. Premat-GO reacted anaerobically with excess Cu(II) to efficiently form the thioether bond but not the Y272 radical. A potential C228-copper coordinated intermediate (lambda max = 406 nm) in the processing reaction, which had not yet formed the C228-Y272 cross-link, was identified from the absorption spectrum. A copper-thiolate protein complex, with copper coordinated to C228, H496, and H581, was also observed in a 3 min anaerobic soak by X-ray crystallography, whereas a 24 h soak revealed the C228-Y272 thioether bond. In solution, addition of oxygenated buffer to premat-GO preincubated with excess Cu(II) generated the Y272 radical state. On the basis of these data, a mechanism for the formation of the C228-Y272 bond and tyrosyl radical generation is proposed. The 406 nm complex is demonstrated to be a catalytically competent processing intermediate under anaerobic conditions. We propose a potential mechanism which is in common with aerobic processing by Cu(II) until the step at which the second electron acceptor is required.

Pi-interaction tuning of the active site properties of metalloproteins.

The influence of pi-interactions with a His ligand have been investigated in a family of copper-containing redox metalloproteins. The Met16Phe and Met16Trp pseudoazurin, and Leu12Phe spinach and Leu14Phe Phormidium laminosum plastocyanin variants possess active-site pi-contacts between the introduced residue and His81 and His87/92 respectively. The striking overlap of the side chain of Phe16 in the Met16Phe variant and that of Met16 in wild type pseudoazurin identifies that this position provides an important second coordination sphere interaction in both cases. His-ligand protonation and dissociation from Cu(I) occurs in the wild type proteins resulting in diminished redox activity, providing a [H(+)]-driven switch for regulating electron transfer. The introduced pi-interaction has opposing effects on the pKa for the His ligand in pseudoazurin and plastocyanin due to subtle differences in the pi-contact, stabilizing the coordinated form of pseudoazurin whereas in plastocyanin protonation and dissociation is favored. Replacement of Pro36, a residue that has been suggested to facilitate structural changes upon His ligand protonation, with a Gly, has little effect on the pKa of His87 in spinach plastocyanin. The mutations at Met16 have a significant influence on the reduction potential of pseudoazurin. Electron self-exchange is enhanced, whereas association with the physiological partner, nitrite reductase, is only affected by the Met16Phe mutation, but kcat is halved in both the Met16Phe and Met16Trp variants. Protonation of the His ligand is the feature most affected by the introduction of a pi-interaction.

Crosstalk between Cu(I) and Zn(II) homeostasis via Atx1 and cognate domains.

The copper metallochaperone Atx1 and the N-terminal metal-binding domain of a copper-transporting ATP-ase can form tight Zn(II)-mediated hetero-complexes in both cyanobacteria and humans. Copper and zinc homeostasis could be linked by metal binding to these CXXC-containing proteins.

FutA2 is a ferric binding protein from Synechocystis PCC 6803.

Synechocystis PCC 6803 has a high demand for iron (10 times greater than Escherichia coli) to sustain photosynthesis and is unusual in possessing at least two putative iron-binding proteins of a type normally associated with ATP-binding cassette-type importers. It has been suggested that one of these, FutA2, binds ferrous iron, but herein we clearly demonstrate that this protein avidly binds Fe(III), the oxidation state preference of periplasmic iron-binding proteins. Structures of apo-FutA2 and Fe-FutA2 have been determined at 1.7 and 2.7A, respectively. The metal ion is bound in a distorted trigonal bipyramidal arrangement with no exogenous anions as ligands. The metal-binding environment, including the second coordination sphere and charge properties, is consistent with a preference for Fe(III). Atypically, FutA2 has a Tat signal peptide, and its inability to coordinate divalent cations may be crucial to prevent metals from binding to the folded protein prior to export from the cytosol. A loop containing the His(43) ligand undergoes considerable movement in apo-versus Fe-FutA2 and may control metal release to the importer. Although these data are consistent with FutA2 being the periplasmic component involved in iron uptake, deletion of another putative ferric binding protein, FutA1, has a greater effect on the accumulation of iron and is more analogous to a DeltafutA1DeltafutA2 double mutant than DeltafutA2. Here, we also discover that there is a reduced level of ferric FutA2 in the periplasm of the DeltafutA1 mutant providing an explanation for its severe iron-uptake phenotype.

The importance of the long type 1 copper-binding loop of nitrite reductase for structure and function.

The long 15-residue type 1 copper-binding loop of nitrite reductase has been replaced with that from the cupredoxin amicyanin (7 residues). This sizable loop contraction does not have a significant effect on the spectroscopy, and therefore, the structures of both the type 1 and type 2 Cu(II) sites. The crystal structure of this variant with Zn(II) at both the type 1 and type 2 sites has been determined. The coordination geometry of the type 2 site is almost identical to that found in the wild-type protein. However, the structure of the type 1 centre changes significantly upon metal substitution, which is an unusual feature for this class of site. The positions of most of the coordinating residues are altered of which the largest difference was observed for the coordinating His residue in the centre of the mutated loop. This ligand moves away from the active site, which results in a more open metal centre with a coordinating water molecule. Flexibility has been introduced into this region of the protein. The 200 mV increase in the reduction potential of the type 1 copper site indicates that structural changes upon reduction must stabilise the cuprous form. The resulting unfavourable driving force for electron transfer between the two copper sites, and an increased reorganisation energy for the type 1 centre, contribute to the loop variant having very little nitrite reductase activity. The extended type 1 copper-binding loop of this enzyme makes a number of interactions that are important for maintaining quaternary structure.

Uracil recognition in archaeal DNA polymerases captured by X-ray crystallography.

Archaeal family B DNA polymerases bind tightly to template-strand uracil and stall replication on encountering the pro-mutagenic base. This article describes an X-ray crystal structure, at 2.8 A resolution, of Thermococcus gorgonarius polymerase in complex with a DNA primer-template containing uracil in the single-stranded region. The DNA backbone is distorted to position the uracil deeply within a pocket, located in the amino-terminal domain of the polymerase. Specificity arises from a combination of hydrogen bonds between the protein backbone and uracil, with the pocket shaped to prevent the stable binding of the four standard DNA bases. Strong interactions are seen with the two phosphates that flank the uracil and the structure gives clues concerning the coupling of uracil binding to the halting of replication. The importance of key amino acids, identified by the analysis of the structure and their conservation between archaeal polymerases, was confirmed by site-directed mutagenesis. The crystal structure of V93Q, a polymerase variant that no longer recognises uracil, is also reported, explaining the V93Q phenotype by the steric exclusion of uracil from the pocket.