Small bowel protection against NSAID-injury in rats: Effect of rifaximin, a poorly absorbed, GI targeted, antibiotic.

Nonsteroidal anti-inflammatory drugs, besides exerting detrimental effects on the upper digestive tract, can also damage the small and large intestine. Although the underlying mechanisms remain unclear, there is evidence that enteric bacteria play a pivotal role. The present study examined the enteroprotective effects of a delayed-release formulation of rifaximin-EIR (R-EIR, 50mg/kg BID, i.g.), a poorly absorbed antibiotic with a broad spectrum of antibacterial activity, in a rat model of enteropathy induced by indomethacin (IND, 1.5mg/kg BID for 14 days) administration. R-EIR was administered starting 7 days before or in concomitance with IND administration. At the end of treatments, blood samples were collected to evaluate hemoglobin (Hb) concentration (as an index of digestive bleeding). Small intestine was processed for: (1) histological assessment of intestinal damage (percentage length of lesions over the total length examined); (2) assay of tissue myeloperoxidase (MPO) and TNF levels, as markers of inflammation; (3) assay of tissue malondialdehyde (MDA) and protein carbonyl concentrations, as an index of lipid and protein peroxidation, respectively; (4) evaluation of the major bacterial phyla. IND significantly decreased Hb levels, this effect being significantly blunted by R-EIR. IND also induced the occurrence of lesions in the jejunum and ileum. In both intestinal regions, R-EIR significantly reduced the percentage of lesions, as compared with rats receiving IND alone. Either the markers of inflammation and tissue peroxidation were significantly increased in jejunum and ileum from IND-treated rats. However, in rats treated with R-EIR, these parameters were not significantly different from those observed in controls. R-EIR was also able to counterbalance the increase in Proteobacteria and Firmicutes abundance induced by INDO. To summarize, R-EIR treatment significantly prevents IND-induced intestinal damage, this enteroprotective effect being associated with a decrease in tissue inflammation, oxidative stress and digestive bleeding as well as reversal of NSAID-induced alterations in bacterial population.

In vivo tissue engineering of functional skeletal muscle by freshly isolated satellite cells embedded in a photopolymerizable hydrogel.

The success of skeletal muscle reconstruction depends on finding the most effective, clinically suitable strategy to engineer myogenic cells and biocompatible scaffolds. Satellite cells (SCs), freshly isolated or transplanted within their niche, are presently considered the best source for muscle regeneration. Here, we designed and developed the delivery of either SCs or muscle progenitor cells (MPCs) via an in situ photo-cross-linkable hyaluronan-based hydrogel, hyaluronic acid-photoinitiator (HA-PI) complex. Partially ablated tibialis anterior (TA) of C57BL/6J mice engrafted with freshly isolated satellite cells embedded in hydrogel showed a major improvement in muscle structure and number of new myofibers, compared to muscles receiving hydrogel + MPCs or hydrogel alone. Notably, SCs embedded in HA-PI also promoted functional recovery, as assessed by contractile force measurements. Tissue reconstruction was associated with the formation of both neural and vascular networks and the reconstitution of a functional SC niche. This innovative approach could overcome previous limitations in skeletal muscle tissue engineering.

Electrophysiologic stimulation improves myogenic potential of muscle precursor cells grown in a 3D collagen scaffold.

The production of engineered three-dimensional (3D) skeletal muscle grafts holds promise for treatment of several diseases. An important factor in the development of such approach involves the capability of preserving myogenicity and regenerative potential during ex vivo culturing. We have previously shown that electrical stimulation of myogenic cells grown in monolayer could improve the differentiation process. Here we investigated the effect of exogenous electrical field, specifically designed to mimic part of the neuronal activity, on muscle precursor cells (MPCs) cultured within 3D collagen scaffolds. Our data showed that electric stimulation did not affect cell viability and increased by 65.6% the release rate of NO(x), an early molecular activator of satellite cells in vivo. NO(x) release rate was decreased by an inhibitor of NO synthase, both in stimulated and non-stimulated cultures, confirming the endocrine origin of the measured NO(x). Importantly, electrical stimulation also increased the expression of two myogenic markers, MyoD and desmin. We also carried out some preliminary experiments aimed at determining the biocompatibility of our seeded collagen scaffolds, implanting them in the tibialis anterior muscles of syngeneic mice. Ten days after transplantation, we could observe the formation of new myofibers both inside the scaffold and at the scaffold/muscle interface. Altogether, our findings indicate that electrical stimulation could be a new strategy for the effective 3D expansion of muscle precursor cells in vitro without losing myogenic potential and that 3D collagen matrices could be a promising tool for delivering myogenic cells in recipient muscles.

In search for a gold-standard procedure to count motor neurons in the spinal cord.

Counting motor neurons within the spinal cord and brainstem represents a seminal step to comprehend the anatomy and physiology of the final common pathway sourcing from the CNS. Motor neuron loss allows to assess the severity of motor neuron disorders while providing a tool to assess disease modifying effects. Counting motor neurons at first implies gold standard identification methods. In fact, motor neurons may occur within mixed nuclei housing a considerable amount of neurons other than motor neurons. In the present review, we analyse various approaches to count motor neurons emphasizing both the benefits and bias of each protocol. A special emphasis is placed on discussing automated stereology. When automated stereology does not take into account site-specificity and does not distinguish between heterogeneous neuronal populations, it may confound data making such a procedure a sort of "guide for the perplex". Thus, if on the one hand automated stereology improves our ability to quantify neuronal populations, it may also hide false positives/negatives in neuronal counts. For instance, classic staining for antigens such as SMI-32, SMN and ChAT, which are routinely considered to be specific for motor neurons, may also occur in other neuronal types of the spinal cord. Even site specificity within Lamina IX may be misleading due to neuronal populations having a size and shape typical of motor neurons. This is the case of spinal border cells, which often surpass the border of Lamina VII and intermingle with motor neurons of Lamina IX. The present article discusses the need to join automated stereology with a dedicated knowledge of each specific neuroanatomical setting.

Satellite cells delivered by micro-patterned scaffolds: a new strategy for cell transplantation in muscle diseases.

Myoblast transplantation is a potentially useful therapeutic tool in muscle diseases, but the lack of an efficient delivery system has hampered its application. Here we have combined cell biology and polymer processing to create an appropriate microenvironment for in vivo transplantation of murine satellite cells (mSCs). Cells were prepared from single muscle fibers derived from C57BL/6-Tgn enhanced green fluorescent protein (GFP) transgenic mice. mSCs were expanded and seeded within micro-patterned polyglycolic acid 3-dimensional scaffolds fabricated using soft lithography and thermal membrane lamination. Myogenicity was then evaluated in vitro using immunostaining, flow cytometry, and reverse transcription polymerase chain reaction analyses. Scaffolds containing mSCs were implanted in pre-damaged tibialis anterior muscles of GFP-negative syngenic mice. Cells detached from culture dishes were directly injected into contra-lateral limbs as controls. In both cases, delivered cells participated in muscle regeneration, although scaffold-implanted muscles showed a much higher number of GFP-positive fibers in CD57 mice. These findings suggest that implantation of cellularized scaffolds is better than direct injection for delivering myogenic cells into regenerating skeletal muscle.

mTOR-Dependent Cell Proliferation in the Brain.

The mammalian Target of Rapamycin (mTOR) is a molecular complex equipped with kinase activity which controls cell viability being key in the PI3K/PTEN/Akt pathway. mTOR acts by integrating a number of environmental stimuli to regulate cell growth, proliferation, autophagy, and protein synthesis. These effects are based on the modulation of different metabolic pathways. Upregulation of mTOR associates with various pathological conditions, such as obesity, neurodegeneration, and brain tumors. This is the case of high-grade gliomas with a high propensity to proliferation and tissue invasion. Glioblastoma Multiforme (GBM) is a WHO grade IV malignant, aggressive, and lethal glioma. To date, a few treatments are available although the outcome of GBM patients remains poor. Experimental and pathological findings suggest that mTOR upregulation plays a major role in determining an aggressive phenotype, thus determining relapse and chemoresistance. Among several activities, mTOR-induced autophagy suppression is key in GBM malignancy. In this article, we discuss recent evidence about mTOR signaling and its role in normal brain development and pathological conditions, with a special emphasis on its role in GBM.

Plastic changes in the spinal cord in motor neuron disease.

In the present paper, we analyze the cell number within lamina X at the end stage of disease in a G93A mouse model of ALS; the effects induced by lithium; the stem-cell like phenotype of lamina X cells during ALS; the differentiation of these cells towards either a glial or neuronal phenotype. In summary we found that G93A mouse model of ALS produces an increase in lamina X cells which is further augmented by lithium administration. In the absence of lithium these nestin positive stem-like cells preferentially differentiate into glia (GFAP positive), while in the presence of lithium these cells differentiate towards a neuron-like phenotype ( ß III-tubulin, NeuN, and calbindin-D28K positive). These effects of lithium are observed concomitantly with attenuation in disease progression and are reminiscent of neurogenetic effects induced by lithium in the subependymal ventricular zone of the hippocampus.

Gas anti-solvent precipitation assisted salt leaching for generation of micro- and nano-porous wall in bio-polymeric 3D scaffolds.

The mass transport through biocompatible and biodegradable polymeric 3D porous scaffolds may be depleted by non-porous impermeable internal walls. As consequence the concentration of metabolites and growth factors within the scaffold may be heterogeneous leading to different cell fate depending on spatial cell location, and in some cases it may compromise cell survival. In this work, we fabricated polymeric scaffolds with micro- and nano-scale porosity by developing a new technique that couples two conventional scaffold production methods: solvent casting-salt leaching and gas antisolvent precipitation. 10-15 w/w solutions of a hyaluronic benzyl esters (HYAFF11) and poly-(lactic acid) (PLA) were used to fill packed beds of 0.177-0.425 mm NaCl crystals. The polymer precipitation in micro and nano-porous structures between the salt crystals was induced by high-pressure gas, then its flushing extracted the residual solvent. The salt was removed by water-wash. Morphological analysis by scanning electron microscopy showed a uniform porosity (~70%) and a high interconnectivity between porous. The polymeric walls were porous themselves counting for 30% of the total porosity. This wall porosity did not lead to a remarkable change in compressive modulus, deformation, and rupture pressure. Scaffold biocompatibility was tested with murine muscle cell line C2C12 for 4 and 7 days. Viability analysis and histology showed that micro- and nano-porous scaffolds are biocompatible and suitable for 3D cell culture promoting cell adhesion on the polymeric wall and allowing their proliferation in layers. Micro- and nano-scale porosities enhance cell migration and growth in the inner part of the scaffold.

A combining method to enhance the in vitro differentiation of hepatic precursor cells.

The ideal bioartificial liver should be designed to reproduce as nearly as possible in vitro the habitat that hepatic cells find in vivo. In the present work, we investigated the in vitro perfusion condition with a view to improving the hepatic differentiation of pluripotent human liver stem cells (HLSCs) from adult liver. Tissue engineering strategies based on the cocultivation of HLSCs with hepatic stellate cells (ITO) and with several combinations of medium were applied to improve viability and differentiation. A mathematical model estimated the best flow rate for perfused cultures lasting up to 7 days. Morphological and functional assays were performed. Morphological analyses confirmed that a flow of perfusion medium (assured by the bioreactor system) enabled the in vitro organization of the cells into liver clusters even in the deeper levels of the sponge. Our results showed that, when cocultured with ITO using stem cell medium, HLSCs synthesized a large amount of albumin and the MTT test confirmed an improvement in cell proliferation. In conclusion, this study shows that our in vitro cell conditions promote the formation of clusters of HLSCs and enhance the functional differentiation into a mature hepatic population.

Flow cytometric cell cycle analysis of muscle precursor cells cultured within 3D scaffolds in a perfusion bioreactor.

It has been widely demonstrated that perfusion bioreactors improve in vitro three-dimensional (3D) cultures in terms of high cell density and uniformity of cell distribution; however, the studies reported in literature were primarily based on qualitative analysis (histology, immunofluorescent staining) or on quantitative data averaged on the whole population (DNA assay, PCR). Studies on the behavior, in terms of cell cycle, of a cell population growing in 3D scaffolds in static or dynamic conditions are still absent. In this work, a perfusion bioreactor suitable to culture C(2)C(12) muscle precursor cells within 3D porous collagen scaffolds was designed and developed and a method based on flowcytometric analyses for analyzing the cell cycle in the cell population was established. Cells were extracted by enzymatic digestion of the collagen scaffolds after 4, 7, and 10 days of culture, and flow cytometric live/dead and cell cycle analyses were performed with Propidium Iodide. A live/dead assay was used for validating the method for cell extraction and staining. Moreover, to investigate spatial heterogeneity of the cell population under perfusion conditions, two stacked scaffolds in the 3D domain, of which only the upstream layer was seeded, were analyzed separately. All results were compared with those obtained from static 3D cultures. The live/dead assay revealed the presence of less than 20% of dead cells, which did not affect the cell cycle analysis. Cell cycle analyses highlighted the increment of cell fractions in proliferating phases (S/G(2)/M) owing to medium perfusion in long-term cultures. After 7-10 days, the percentage of proliferating cells was 8-12% for dynamic cultures and 3-5% for the static controls. A higher fraction of proliferating cells was detected in the downstream scaffold. From a general perspective, this method provided data with a small standard deviation and detected the differences between static and dynamic cultures and between upper and lower scaffolds. Our methodology can be extended to other cell types to investigate the influence of 3D culture conditions on the expression of other relevant cell markers.

Muscle differentiation and myotubes alignment is influenced by micropatterned surfaces and exogenous electrical stimulation.

An in vitro muscle-like structure with parallel-oriented contractile myotubes is needed as a model of muscle tissue regeneration. For this purpose, it is necessary to reproduce a controllable microscale environment mimicking the in vivo cues. In this work we focused on the application of topological and electrical stimuli on muscle precursor cell (MPC) culture to influence MPC orientation and induce myotube alignment. The two stimulations were tested both independently and together. A structural and topological template was achieved using micropatterned poly-(L-lactic acid) membranes. Electrical stimulation, consisting of square pulses of 70 mV/cm amplitude each 30 s, was applied to the MPC culture. The effect of different pulse durations on cultures was evaluated by galvanotaxis analysis. The highest cell displacement rate toward the cathode was observed for 3 ms pulse stimulation, which was then applied in combination with topological stimuli. Topological and electrical stimuli had an additive effect in enhancing differentiation of cultured MPC, shown by high Troponin I protein production and, in parallel, Myogenin and Desmin genes, down- and upregulation respectively.

Micropatterned biopolymer 3D scaffold for static and dynamic culture of human fibroblasts.

During in vivo tissue regeneration, cell behavior is highly influenced by the surrounding environment. Thus, the choice of scaffold material and its microstructure is one of the fundamental steps for a successful in vitro culture. An efficacious method for scaffold fabrication should prove its versatility and the possibility of controlling micro- and nanostructure. In this paper, hyaluronic acid 3D scaffolds were developed through lamination of micropatterned membranes, fabricated after optimization of a soft-lithography method. The scaffold presented here is characterized by a homogeneous hexagonal lattice with porosity of 69%, specific surface area of 287 cm-1, and permeability of 18.9 microm2. The control over the geometry was achieved with an accuracy of 20 mum. This technique allowed not only fabrication of planar 3D scaffolds but also production of thin wall tubular constructs. Mechanical tests, performed on dry tubular scaffolds, show high rupture tensile strength. This construct could be promising not only as engineered vascular grafts but also for regeneration of skin, urethra, and intestinal walls. The biocompatibility of a 3D planar scaffold was tested by seeding human fibroblasts. The cells were cultured in both static and dynamic conditions, in a perfusion bioreactor at different flow rates. Microscope analysis and MTT test showed cell proliferation and viability and a uniform cell distribution likely due to an appropriate lattice structure.