Poly(vinyl chloride) Dechlorination Catalyzed by Zirconium.

Poly(vinyl chloride) undergoes dechlorination in the presence of triethylsilane (Et3SiH) and a catalytic amount of [Cp2Zr(NPh2)][CH3B(C6F5)3] (1 b) at 40-80 °C, with up to 91 % efficiency. Stoichiometric reactivity studies conducted on cyclohexyl chloride as a model suggest that 1 b dechlorinates PVC by initial chloride abstraction, followed by hydride transfer to the cationic PVC chain from Et3SiH. Consumer items such as pipe fitting, vinyl disc or electric cable insulation undergo either dechlorination or hydrosilylation of the carbonyl-containing copolymer (polyvinyl acetate) or plasticizer (phthalate).

Altering the Site of Electron Abstraction in Cobalt Corroles via meso-Trifluoromethyl Substituents.

A mono-DMSO cobalt meso-CF3 corrole, formulated as (CF3)3CorCo(DMSO), where (CF3)3Cor is the trianion of 5,10,15-tris(trifluoromethyl)corrole, was synthesized and characterized as to its spectral and electrochemical properties in nonaqueous media with a focus on its coordination chemistry and electronic structure. Cyclic voltammetric measurements showed more facile reductions and difficult oxidations compared to the cobalt triarylcorrole possessing p-CF3Ph units at the meso-positions, a result consistent with the enhanced inductive effect of the electron-withdrawing trifluoromethyl substituents linked directly at the meso-carbon atoms of the macrocycle. The effects of DMSO, pyridine, and cyanide anions (CN-) on the electrochemistry and spectral properties of the compound were investigated, and it was found that only two molar equivalents are needed to form the bis-CN adduct, which exhibited two 1-electron oxidations at 0.27 and 0.95 V vs saturated calomel electrode (SCE) in CH2Cl2/0.1 M TBAP. The sites of electron transfer in the first oxidation and reduction were investigated by spectroelectrochemistry and confirmed that the first electron addition affords a Cor3-CoII complex under all solution conditions independent of the initial coordination and/or electronic configuration (i.e., innocent Cor3-CoIII or noninnocent Cor•2-CoII). In contrast, data for the first oxidation suggests that the site of electron abstraction (ligand or metal) depended upon coordination of the neutral and in situ generated complexes under the various solution conditions, leading to a Co(IV)-corrole3- product for both the bis-pyridine and bis-cyanide adducts.

Bis(salicylamidine) Ligands (FAlen): A Variant of Salen with "à la Carte" Denticity.

Ethylene- and phenylene-bridged bis(salicylamidine) ligands have been readily prepared from ethylene or phenylenediamine and iminium chloride derivatives generated in situ from N,N-dialkylsalicylamides. The former, in its diprotonated form (FAlenH2), reacts with AlMe3 to afford a zwitterionic dimethyldiphenoxyaluminate complex with the FAlen ligand monoprotonated and in a bidentate κ2O,O' fashion. A phenylene-bridged proligand behaves differently, yielding a neutral methylaluminum complex bearing a κ3O,N,O'-coordinated FAlen ligand. From these complexes, methyl anion abstraction with B(C6F5)3 or a reaction with Schrock's alcohol leads to the corresponding aluminum cationic or alkoxy complexes in which a κ4O,N,N',O'-coordination mode of the FAlen ligand is observed. X-ray diffraction studies of the proligands and of the complexes show that the amidine functions feature a trans configuration when the N-amidine atom is not coordinated to the metal and conversely a cis configuration when it is. Density functional theory calculations show that trans-cis isomerization of the amidine functions occurs upon coordination with the metal ion with very low energy barriers. They also confirm the intuition that the denticity of the FAlen ligands in the complexes is directly related to the electron richness of the metal ion. At last, FAlen Al complexes are used as initiators for the controlled ring-opening polymerization of rac-lactide to afford poly(lactic acid) with slight isotactic bias.

Tetrazo[1,2-b]indazoles: Straightforward Access to Nitrogen-Rich Polyaromatics from s-Tetrazines.

The straightforward access to a new class of aza-polyaromatics is reported. Starting from readily available fluorinated s-tetrazine, a cyclization process with azide leads to the formation of an unprecedented tetrazo[1,2-b]indazole or a bis-tetrazo[1,2-b]indazole (cis and trans conformers). Based on the new nitrogen core, further N-directed palladium-catalyzed ortho-C-H bond functionalization allows the introduction of halides or acetates. The physicochemical properties of these compounds were studied by a joint experimental/theoretical approach. The tetrazo[1,2-b]indazoles display solid-state π-stacking, low reduction potential, absorption in the visible range up to the near-infrared, and intense fluorescence, depending on the molecular structure.

Tetranuclear Dicationic Aurophilic Gold(I) Catalysts in Enyne Cycloisomerization: Cooperativity for a Dramatic Shift in Selectivity.

In comparison to mononuclear gold Lewis acid catalysts, digold complexes and dual-gold catalysis have illustrated a distinct and powerful potential for the activation of carbon-carbon multiple bonds. Herein, this concept is pushed further by designing novel tetranuclear gold(I) dicationic complexes structurally supported by strongly stabilizing constraint diphosphinoferrocenyl ligands and attractive closed-shell Au⋅⋅⋅Au aurophilic interactions. The use of a molecularly-defined tetranuclear dicationic aurophilic gold(I) precatalyst for the selectivity-challenging cycloisomerization of low-substituted 1,6-enynes favors the formation with high selectivity of strained azabicyclo[4.1.0]hept-4-enes - even in the complete absence of activating/orienting substituents on alkyne and olefin reactive functions. This selectivity is not achieved by the reported phosphine- and carbene-stabilized mono- and dinuclear cationic gold(I) complexes, including the ones formed from the same ligands. More importantly this selectivity differs also from nanoparticles and heterogeneous gold catalysts reported to date. DFT studies correlated to experimental mechanistic investigations support an unprecedented "cluster-like" reactivity from polynuclear cooperation at the origin of this peculiar selectivity where the aurophilic interactions preexist, and pre-organize, gold cluster reactive intermediates.

Template Synthesis of NPN' Pincer-type Ligands at Titanium Using an Ambiphilic Phosphide Scaffold.

Ti-imido complex [TiCl(NtBu)(BIPP)] [1; BIPP = bis(iminophosphoranyl)phosphide ligand] reacts with terminal alkynes R-C≡CH (R = phenyl, isopropenyl, cyclopropyl, and 2-pyridyl) via P-P bond cleavage of the BIPP ligand. The resulting complexes [TiCl(NPN')(NPhPPh2)] (2a-d) contain a pincer-type NPN' phosphide ligand that incorporates the terminal alkyne and the imido ligand from complex 1. Complexes 2a-d feature two chiral centers (Ti and P) with interdependent absolute configurations; thus, they are formed stereoselectively. Complex 2a (R = phenyl) undergoes chloride abstraction with [Et3SiHSiEt3][B(C6F5)4], yielding [Ti(NPN')(NPhPPh2)][B(C6F5)4] (3). Complex 3 is a moderately active and stereoselective initiator for the ring-opening polymerization of rac-lactide. Complex 3 activates the C═O bond of 4-iodobenzaldehyde to give complex 4 as a single diastereomer despite the presence of three chiral centers. Complex 3 undergoes transmetallation with SbCl3, yielding [Sb(NPN')][B(C6F5)4] (5) and [TiCl3(NPhPPh2)] (6) selectively. The bonding situation in 3 and 5 was analyzed using Bader's atoms in molecules and the electron localization function, showing that the nitrogen atoms of the NPN' ligand are electronically similar, and that the metal-phosphide interaction is more polar in the case of titanium.

Stepwise Oxidative C-C Coupling and/or C-N Fusion of Zn(II) meso-Pyridin-2-ylthio-porphyrins.

The synthesis and characterization of zinc(II) meso-pyridin-2-ylthio-porphyrins are presented in this manuscript. The (electro)chemical oxidation of [5-(pyridin-2-ylthio)-10,20-bis(p-tolyl)-15-phenylporphyrinato] zinc(II) or [5,15-bis(pyridin-2-ylthio)-10,20-bis(p-tolyl)porphyrinato] zinc(II) leads to the formation of one or two C-N bond(s) by intramolecular nucleophilic attack of the peripheral thiopyridinyl fragment(s) on the neighboring ß-pyrrolic position(s) (C-N fusion reaction). In addition, the chemical oxidation of [5-(pyridin-2-ylthio)-10,20-bis(p-tolyl)porphyrinato] zinc(II), i.e., bearing one free meso position, mainly affords the meso,meso-dimer. Further stepwise electrochemical oxidation selectively produces the mono and bis C-N fused meso,meso-dimer. The resulting pyridinium derivatives exhibit important changes in their physicochemical properties (NMR, UV-vis, CV) as compared to their initial unfused precursors. Also, the X-ray crystallographic structures of three unfused monomers, one unfused meso,meso-dimer, and two C-N fused monomers are presented.

New insights in chemical reactivity from quantum chemical topology.

Based on the quantum chemical topology of the modified electron localization function ELFx , an efficient and robust mechanistic methodology designed to identify the favorable reaction pathway between two reactants is proposed. We first recall and reshape how the supermolecular interaction energy can be evaluated from only three distinct terms, namely the intermolecular coulomb energy, the intermolecular exchange-correlation energy and the intramolecular energies of reactants. Thereafter, we show that the reactivity between the reactants is driven by the first-order variation in the coulomb intermolecular energy defined in terms of the response to changes in the number of electrons. Illustrative examples with the formation of the dative bond B-N involved in the BH3 NH3 molecule and the typical formation of the hydrogen bond in the canonical water dimer are presented. For these selected systems, our approach unveils a noticeable mimicking of Edual onto the DFT intermolecular interaction energy surface calculated between the both reactants. An automated reaction-path algorithm aimed to determine the most favorable relative orientations when the two molecules approach each other is also outlined.

Coordinatively Unsaturated Amidotitanocene Cations with Inverted σ and π Bond Strengths: Controlled Release of Aminyl Radicals and Hydrogenation/Dehydrogenation Catalysis.

Cationic amidotitanocene complexes [Cp2 Ti(NPhAr)][B(C6 F5 )4 ] (Cp=η5 -C5 H5 ; Ar=phenyl (1 a), p-tolyl (1 b), p-anisyl (1 c)) were isolated. The bonding situation was studied by DFT (Density Functional Theory) using EDA-NOCV (Energy Decomposition Analysis with Natural Orbitals for Chemical Valence). The polar Ti-N bond in 1 a-c features an unusual inversion of σ and π bond strengths responsible for the balance between stability and reactivity in these coordinatively unsaturated species. In solution, 1 a-c undergo photolytic Ti-N cleavage to release Ti(III) species and aminyl radicals ⋅NPhAr. Reaction of 1 b with H3 BNHMe2 results in fast homolytic Ti-N cleavage to give [Cp2 Ti(H3 BNHMe2 )][B(C6 F5 )4 ] (3). 1 a-c are highly active precatalysts in olefin hydrogenation and silanes/amines cross-dehydrogenative coupling, whilst 3 efficiently catalyzes amine-borane dehydrogenation. The mechanism of olefin hydrogenation was studied by DFT and the cooperative H2 activation key step was disclosed using the Activation Strain Model (ASM).

C-H Bond Arylation of Pyrazoles at the ß-Position: General Conditions and Computational Elucidation for a High Regioselectivity.

Direct arylation of most five-membered ring heterocycles are generally easily accessible and strongly favored at the α-position using classical palladium-catalysis. Conversely, regioselective functionalization of such heterocycles at the concurrent ß-position remains currently very challenging. Herein, we report general conditions for regioselective direct arylation at the ß-position of pyrazoles, while C-H α-position is free. By using aryl bromides as the aryl source and a judicious choice of solvent, the arylation reaction of variously N-substituted pyrazoles simply proceeds via ß-C-H bond functionalization. The ß-regioselectivity is promoted by a ligand-free palladium catalyst and a simple base without oxidant or further additive, and tolerates a variety of substituents on the bromoarene. DFT calculations revealed that a protic solvent such as 2-ethoxyethan-1-ol significantly enhances the acidity of the proton at ß-position of the pyrazoles and thus favors this direct ß-C-H bond arylation. This selective pyrazoles ß-C-H bond arylation was successfully applied for the straightforward building of π-extended poly(hetero)aromatic structures via further Pd-catalyzed combined α-C-H intermolecular and intramolecular C-H bond arylation in an overall highly atom-economical process.

The Topological Analysis of the ELFx Localization Function: Quantitative Prediction of Hydrogen Bonds in the Guanine-Cytosine Pair.

In this contribution, we recall and test a new methodology designed to identify the favorable reaction pathway between two reactants. Applied to the formation of the DNA guanine (G) -cytosine (C) pair, we successfully predict the best orientation between the base pairs held together by hydrogen bonds and leading to the formation of the typical Watson Crick structure of the GC pair. Beyond the global minimum, some local stationary points of the targeted pair are also clearly identified.

Coordination Chemistry of a Bis(Tetrazine) Tweezer: A Case of Host-Guest Behavior with Silver Salts.

The carbon-carbon cross-coupling of phenyl s-tetrazine (Tz) units at their ortho-phenyl positions allows the formation of constrained bis(tetrazines) with original tweezer structures. In these compounds, the face-to-face positioning of the central tetrazine cores is reinforced by π-stacking of the electron-poor nitrogen-containing heteroaromatic moieties. The resulting tetra-aromatic structure can be used as a weak coordinating ligand with cationic silver. This coordination generates a set of bis(tetrazine)-silver(I) coordination complexes tolerating a large variety of counter anions of various geometries, namely, PF6-, BF4-, SbF6-, ClO4-, NTf2-, and OTf-. These compounds were characterized in the solid state by single-crystal X-ray diffraction (XRD) and diffuse reflectance spectroscopy, and in solution by 1H-NMR, mass spectrometry, electroanalysis, and UV-visible absorption spectrophotometry. The X-ray crystal structure of complexes {[Ag(3)][PF6]}∞ (4) and {[Ag(3)][SbF6]}∞ (6), where 3 is 3,3'-[(1,1'-biphenyl)-2,2'-diyl]-6,6'-bis(phenyl)-1,2,4,5-tetrazine, revealed the formation of 1D polymeric chains, characterized by an evolution to a large opening of the original tweezer and a coordination of silver(I) via two chelating nitrogen atom and some C=C π-interactions. Electrochemical and UV spectroscopic properties of the original tweezer and of the corresponding silver complexes are reported and compared. 1H-NMR titrations with AgNTf2 allowed the determination of the stoichiometry and apparent stability of two solution species, namely [Ag(3)]+ and [Ag(3)2]2+, that formed in CDCl3/CD3OD 2:1 v/v mixtures.

Solvent and Anion Effects on the Electrochemistry of Manganese Dipyrrin-Bisphenols.

A series of "N2O2-type" manganese dipyrrin-bisphenols (DPP), formulated as (Ar)DPPMn, where Ar = pentafluorophenyl (F5Ph), phenyl (Ph), or mesityl (Mes), were electrochemically and spectroscopically characterized in nonaqueous media with and without added anions in the form of tetrabutylammonium salts (TBAX where X = ClO4-, PF6-, BF4-, F-, Cl-, OH-, or CN-). Two major one-electron reductions are observed under most solution conditions, the first of which is assigned as a MnIII/II process and the second as electron addition to the π-ring system as confirmed by spectroelectrochemistry. Each MnIII complex also exhibits one or two one-electron oxidations, the exact number depending upon the positive potential limit of the electrochemical solvent. The two oxidations are separated by 580-590 mV in CH3CN containing 0.1 M TBAPF6 and are assigned as π-ring-centered electron transfers to stepwise form a (Ar)DPPMnIII π-cation radical and dication under these solution conditions. Comparisons are made between redox properties of (Ar)DPPMn and manganese(III) porphyrins, corroles, and corrolazines each of which contains an innocent trianionic complexing ligand. The redox behavior and spectroscopic properties of [(Ar)DPPMn]n where n = 0, -1, or +1 are also compared to that of other structurally related [(Ar)DPPM]n complexes under similar solution conditions where M = CoII, CuII, BIII, or AuIII.

Old Dog, New Tricks: Innocent, Five-coordinate Cyanocobalt Corroles.

Three mono-CN ligated anionic cobalt A3-triarylcorroles were synthesized and investigated as to their spectroscopic and electrochemical properties in CH2Cl2, pyridine (Py), and dimethyl sulfoxide (DMSO). The newly synthesized corroles provide the first examples of air-stable cobalt corroles with an anionic axial ligand and are represented as [(Ar)3CorCoIII(CN)]-TBA+, where Cor is the trivalent corrole macrocycle, Ar is p-(CN)Ph, p-(CF3)Ph, or p-(OMe)Ph, and TBA+ is the tetra-n-butylammonium (TBA) cation. Multiple redox reactions are observed for each mono-CN derivative with a key feature being a more facile first oxidation and a more difficult first reduction in all three solvents as compared to all previously examined corroles with similar meso- and ß-pyrrole substituents. Formation constants (log K) for conversion of the five-coordinate mono-CN complex to its six-coordinate bis-CN form ranged from 102.8 for Ar = p-(OMe)Ph to 104.7 for Ar = p-(CN)Ph in DMSO as determined by spectroscopic methodologies. The in situ generated bis-CN complexes, represented as [(Ar)3CorCoIII(CN)2]2-(TBA+)2, and the mixed ligand complexes, represented as [(Ar)3CorCoIII(CN)(Py)]-TBA+, were also investigated as to their electrochemical and spectroscopic properties. UV-visible spectra and electrode reactions of the synthesized mono-CN derivatives are compared with the neutral mono-DMSO cobalt corrole complexes and the in situ generated bis-CN and bis-Py complexes, and the noninnocent (or innocent) nature of each cobalt corrole system is addressed. The data demonstrate the ability of the CN- axial ligand(s) to stabilize the high-valent forms of the metallocorrole, leading to systems with innocent macrocyclic ligands. Although a number of six-coordinate cobalt(III) corroles with N-donor ligands were characterized in the solid state, a dissociation of one axial ligand readily occurs in nonaqueous solvents, and this behavior contrasts with the high stability of the currently studied bis-CN adducts in CH2Cl2, pyridine, or DMSO. Linear free energy relationships were elucidated between the meso-phenyl Hammett substituent constants (Σσ) and the measured binding constants, the redox potentials, and the energy of the band positions in the mono-CN and bis-CN complexes in their neutral or singly oxidized forms, revealing highly predictable trends in the physicochemical properties of the anionic corroles.

Bridge-Clamp Bis(tetrazine)s with [N]8 π-Stacking Interactions and Azido-s-Aryl Tetrazines: Two Classes of Doubly Clickable Tetrazines.

Click chemistry at a tetrazine core is useful for bioorthogonal labeling and crosslinking. Introduced here are two new classes of doubly clickable s-aryl tetrazines synthesized by Cu-catalyzed cross-coupling. Homocoupling of o-brominated s-aryl tetrazines leads to bis(tetrazine)s structurally characterized by tetrazine cores arranged face-to-face. [N]8 π-stacking interactions are essential to the conformation. Upon inverse electron demand Diels-Alder (iEDDA) cycloaddition, the bis(tetrazine)s produce a unique staple structure. The o-azidation of s-aryl tetrazines introduces a second proximal intermolecular clickable function that leads to double click chemistry opportunities. The stepwise introduction of fluorophores and then iEDDA cycloaddition, including bioconjugation to antibodies, was achieved on this class of tetrazines. This method extends to (thio)etherification, phosphination, trifluoromethylation and the introduction of various bioactive nitrogen-based heterocycles.

The Taming of Redox-Labile Phosphidotitanocene Cations.

Tame d0 phosphidotitanocene cations stabilized with a pendant tertiary phosphane arm are reported. These compounds were obtained by one-electron oxidation of d1 precursors with [Cp2 Fe][BPh4 ]. The electronic structure of these compounds was studied experimentally (EPR, UV/Vis, and NMR spectroscopy, X-ray diffraction analysis) and through DFT calculations. The theoretical analysis of the bonding situation by using the electron localization function (ELF) shows the presence of π-interactions between the phosphido ligand and Ti in the d0 complexes, whereas dπ-pπ repulsion prevents such interactions in the d1 complexes. In addition, CH-π interactions were observed in several complexes, both in solution and in the solid state, between the phosphido ligand and the phosphane arm. The d0 complexes were found to be light sensitive, and decompose through Ti-P bond homolysis to give TiIII species. A naked d0 phosphidotitanocene cation has been trapped by reaction with diphenylacetylene, yielding a Ti/P frustrated Lewis pair (FLP), which was found to be less reactive than a previously reported Zr analog.

Rationalisation of the optical signatures of nor-dihydroxanthene-hemicyanine fused near-infrared fluorophores by first-principle tools.

Using a computational approach combining the Time-Dependent Density Functional Theory (TD-DFT) and the second-order Coupled Cluster (CC2) approaches, we investigate the spectral properties of a large panel of nor-dihydroxanthene (DHX)-hemicyanine fused dyes. First we compare the theoretical and experimental 0-0 energies for a set of 14 known synthetic compounds and show that a remarkable agreement between theory and experiment is obtained when a suitable environmental model is selected. In addition, we obtain vibrationally-resolved spectra for several compounds and theory also accurately reproduces the experimental band shapes. We show that the electronic transitions in nor-DHX-based fluorophores are associated with small variations of the dipole moments but large oscillator strengths. Using various chemical strategies, we design a series of compounds with red-shifted 0-0 energies.

Molecular mechanics models for the image charge, a comment on "including image charge effects in the molecular dynamics simulations of molecules on metal surfaces".

We re-investigate the image charge model of Iori and Corni (Iori and Corni, J. Comput. Chem. 2008, 29, 1656). We find that a simple symmetrization of their model allows to obtain quantitatively correct results for the electrostatic interaction of a water molecule with a metallic surface. This symmetrization reduces the magnitude of the electrostatic interaction to less than 10% of the total interaction energy. © 2017 Wiley Periodicals, Inc.

Planar-Chiral 1,1'-Diboryl Metallocenes: Diastereoselective Synthesis from Boryl Cyclopentadienides and Spin Density Analysis of a Diborylcobaltocene.

The reaction of nonsubstituted alkali metal cyclopentadienides with haloboranes leads to ∼90:10 mixtures of isomeric diene products that can be deprotonated to give simple boryl cyclopentadienides. We extended this transformation to the sterically hindered lithium tert-butylcyclopentadienide 1 using FBMes2 (Mes = 2,4,6-trimethylphenyl) and ClBCy2 as electrophiles. The boryl group is selectively introduced in the remote position to minimize steric congestion. The new boryl dienes are obtained as mixtures of isomers, and subsequent deprotonation with MeLi or LiHMDS affords the lithium 1,3-disubstituted cyclopentadienides 5a,b in yields over 95%. Direct assembling of tert-butylated boryl cyclopentadienides with MCl2 (M = Fe, Co) selectively leads to 1,1'-planar chiral ferrocenes 6a,b and cobaltocene 7. To shed light into the diastereoselective formation of 6a, DFT calculations were performed. The potential energy surface was scrutinized so as to identify and compare its diastereoisomers and conformers. This stereoselectivity is attributed to minimized steric repulsions between the tert-butyl and the BMes2 groups in the eclipsed conformation of the racemic diastereoisomers. The X-ray structures of boryl diene 2a and diboryl ferrocene 6a are reported. The electronic structure of cobaltocene 7 was analyzed by EPR and DFT calculations. The spin density of this unique open-shell complex is mainly localized on the Co center, but significant spin density is also found on the boron atoms, indicating substantial delocalization of the unpaired electron over the Lewis acid moieties. Consistently, the singly occupied molecular orbital is a combination of a Co-centered 3d orbital with π(BC) orbitals on each CpBMes2 rings. There is only weak, if any, direct M···B interaction in 6 and 7.

Multiple Roles of Isocyanides in Palladium-Catalyzed Imidoylative Couplings: A Mechanistic Study.

Kinetic, spectroscopic and computational studies examining a palladium-catalyzed imidoylative coupling highlight the dual role of isocyanides as both substrates and ligands for this class of transformations. The synthesis of secondary amides from aryl halides and water is presented as a case study. The kinetics of the oxidative addition of ArI with RNC-ligated Pd0 species have been studied and the resulting imidoyl complex [(ArC=NR)Pd(CNR)2 I] (Ar=4-F-C6 H4 , R=tBu) has been isolated and characterized by X-ray diffraction. The unprecedented ability of this RNC-ligated imidoyl-Pd complex to undergo reductive elimination at room temperature to give the amide in the presence of water and an F- /HF buffer is demonstrated. Its behavior in solution has also been characterized, revealing an unexpected strong tendency to give cationic complexes, and notably [(ArC=NR)Pd(CNR)3 ]+ with excess isocyanide and [(ArC=NR)Pd(PP^ )(CNR)]+ with bidentate phosphines (PP^ ). These species may be responsible for catalyst deactivation and side-reactions. Ab initio calculations performed at the DFT level allowed us to rationalize the multiple roles of RNC in the different steps of the catalytic cycle.