Nonlocal, Flat-Band Meta-Optics for Monolithic, High-Efficiency, Compact Photodetectors.

Miniaturized photodetectors are becoming increasingly sought-after components for next-generation technologies, such as autonomous vehicles, integrated wearable devices, or gadgets embedded on the Internet of Things. A major challenge, however, lies in shrinking the device footprint while maintaining high efficiency. This conundrum can be solved by realizing a nontrivial relation between the energy and momentum of photons, such as dispersion-free devices, known as flat bands. Here, we leverage flat-band meta-optics to simultaneously achieve critical absorption over a wide range of incidence angles. For a monolithic silicon meta-optical photodiode, we achieved an ∼10-fold enhancement in the photon-to-electron conversion efficiency. Such enhancement over a large angular range of ∼36° allows incoming light to be collected via a large-aperture lens and focused on a compact photodiode, potentially enabling high-speed and low-light operation. Our research unveils new possibilities for creating compact and efficient optoelectronic devices with far-reaching impact on various applications, including augmented reality and light detection and ranging.

Rewritable photonic integrated circuits using dielectric-assisted phase-change material waveguides.

Photonic integrated circuits (PICs) can drastically expand the capabilities of quantum and classical optical information science and engineering. PICs are commonly fabricated using selective material etching, a subtractive process. Thus, the chip's functionality cannot be substantially altered once fabricated. Here, we propose to exploit wide-bandgap non-volatile phase-change materials (PCMs) to create rewritable PICs. A PCM-based PIC can be written using a nanosecond pulsed laser without removing any material, akin to rewritable compact disks. The whole circuit can then be erased by heating, and a new circuit can be rewritten. We designed a dielectric-assisted PCM waveguide consisting of a thick dielectric layer on top of a thin layer of wide-bandgap PCMs Sb2S3 and Sb2Se3. The low-loss PCMs and our designed waveguides lead to negligible optical loss. Furthermore, we analyzed the spatiotemporal laser pulse shape to write the PICs. Our proposed platform will enable low-cost manufacturing and have a far-reaching impact on the rapid prototyping of PICs, validation of new designs, and photonic education.

Large field-of-view thermal imaging via all-silicon meta-optics.

A broad range of imaging and sensing technologies in the infrared require large field-of-view (FoV) operation. To achieve this, traditional refractive systems often employ multiple elements to compensate for aberrations, which leads to excess size, weight, and cost. For many applications, including night vision eye-wear, air-borne surveillance, and autonomous navigation for unmanned aerial vehicles, size and weight are highly constrained. Sub-wavelength diffractive optics, also known as meta-optics, can dramatically reduce the size, weight, and cost of these imaging systems, as meta-optics are significantly thinner and lighter than traditional refractive lenses. Here, we demonstrate 80° FoV thermal imaging in the long-wavelength infrared regime (8-12 µm) using an all-silicon meta-optic with an entrance aperture and lens focal length of 1 cm.

Quantum Interference of Resonance Fluorescence from Germanium-Vacancy Color Centers in Diamond.

Resonance fluorescence from a quantum emitter is an ideal source to extract indistinguishable photons. By using the cross-polarization to suppress the laser scattering, we observed resonance fluorescence from GeV color centers in diamond at cryogenic temperature. The Fourier-transform-limited line width emission with T2/2T1 ∼ 0.86 allows for two-photon interference based on single GeV color center. Under pulsed excitation, the separated photons exhibit a Hong-Ou-Mandel quantum interference above classical limit, whereas the continuous-wave excitation leads to a coalescence time window of 1.05 radiative lifetime. In addition, we demonstrated a single-shot readout of spin states with a fidelity of 74%. Our experiments lay down the foundation for building a quantum network with GeV color centers in diamond.

Purcell Enhancement of a Cavity-Coupled Emitter in Hexagonal Boron Nitride.

Integration of solid-state quantum emitters into nanophotonic circuits is a critical step towards fully on-chip quantum photonic-based technologies. Among potential materials platforms, quantum emitters in hexagonal boron nitride (hBN) have emerged as a viable candidate over the last years. While the fundamental physical properties have been intensively studied, only a few works have focused on the emitter integration into photonic resonators. Yet, for a potential quantum photonic material platform, the integration with nanophotonic cavities is an important cornerstone, as it enables the deliberate tuning of the spontaneous emission and the improved readout of distinct transitions for a quantum emitter. In this work, the resonant tuning of a monolithic cavity integrated hBN quantum emitter is demonstrated through gas condensation at cryogenic temperature. In resonance, an emission enhancement and lifetime reduction are observed, with an estimate for the Purcell factor of ≈15.

Coupling Spin Defects in Hexagonal Boron Nitride to Monolithic Bullseye Cavities.

Color centers in hexagonal boron nitride (hBN) are becoming an increasingly important building block for quantum photonic applications. Herein, we demonstrate the efficient coupling of recently discovered spin defects in hBN to purposely designed bullseye cavities. We show that boron vacancy spin defects couple to the monolithic hBN cavity system and exhibit a 6.5-fold enhancement. In addition, by comparative finite-difference time-domain modeling, we shed light on the emission dipole orientation, which has not been experimentally demonstrated at this point. Beyond that, the coupled spin system exhibits an enhanced contrast in optically detected magnetic resonance readout and improved signal-to-noise ratio. Thus, our experimental results, supported by simulations, constitute a first step toward integration of hBN spin defects with photonic resonators for a scalable spin-photon interface.

Large few-layer hexagonal boron nitride flakes for nonlinear optics.

Hexagonal boron nitride (hBN) is a layered dielectric material with a wide range of applications in optics and photonics. In this work, we demonstrate a fabrication method for few-layer hBN flakes with areas up to 5000µm2. We show that hBN in this form can be integrated with photonic microstructures: as an example, we use a circular Bragg grating (CBG). The layer quality of the exfoliated hBN flake on and off a CBG is confirmed by Raman spectroscopy and second-harmonic generation (SHG) microscopy. We show that the SHG signal is uniform across the hBN sample outside the CBG and is amplified in the center of the CBG.

Photonic Nanobeam Cavities with Nanopockets for Efficient Integration of Fluorescent Nanoparticles.

Integrating fluorescent nanoparticles with high-Q, small mode volume cavities is indispensable for nanophotonics and quantum technologies. To date, nanoparticles have largely been coupled to evanescent fields of cavity modes, which limits the strength of the interaction. Here, we developed both a cavity design and a fabrication method that enable efficient coupling between a fluorescent nanoparticle and a cavity optical mode. The design consists of a fishbone-shaped, one-dimensional photonic crystal cavity with a nanopocket located at the electric field maximum of the fundamental optical mode. Furthermore, the presence of a nanoparticle inside the pocket reduces the mode volume substantially and induces subwavelength light confinement. Our approach opens exciting pathways to achieve tight light confinement around fluorescent nanoparticles for applications in energy, sensing, lasing, and quantum technologies.

Coherent Manipulation with Resonant Excitation and Single Emitter Creation of Nitrogen Vacancy Centers in 4H Silicon Carbide.

Silicon carbide (SiC) has become a key player in the realization of scalable quantum technologies due to its ability to host optically addressable spin qubits and wafer-size samples. Here, we have demonstrated optically detected magnetic resonance (ODMR) with resonant excitation and clearly identified the ground state energy levels of the NV centers in 4H-SiC. Coherent manipulation of NV centers in SiC has been achieved with Rabi and Ramsey oscillations. Finally, we show the successful generation and characterization of single nitrogen vacancy (NV) center in SiC employing ion implantation. Our results highligh the key role of NV centers in SiC as a potential candidate for quantum information processing.

Quasi-BIC Resonant Enhancement of Second-Harmonic Generation in WS2 Monolayers.

Atomically thin monolayers of transition metal dichalcogenides (TMDs) have emerged as a promising class of novel materials for optoelectronics and nonlinear optics. However, the intrinsic nonlinearity of TMD monolayers is weak, limiting their functionalities for nonlinear optical processes such as frequency conversion. Here we boost the effective nonlinear susceptibility of a TMD monolayer by integrating it with a resonant dielectric metasurface that supports pronounced optical resonances with high quality factors: bound states in the continuum (BICs). We demonstrate that a WS2 monolayer combined with a silicon metasurface hosting BICs exhibits enhanced second-harmonic intensity by more than 3 orders of magnitude relative to a WS2 monolayer on top of a flat silicon film of the same thickness. Our work suggests a pathway to employ high-index dielectric metasurfaces as hybrid structures for enhancement of TMD nonlinearities with applications in nonlinear microscopy, optoelectronics, and signal processing.

A Single Chiral Nanoparticle Induced Valley Polarization Enhancement.

Valley polarization is among the most critical attributes of atomically thin materials. However, increasing contrast from monolayer transition metal dichalcogenides (TMDs) has so far been challenging. In this work, a large degree of circular polarization up to 45% from a monolayer WS2 is achieved at room temperature by using a single chiral plasmonic nanoparticle. The increased contrast is attributed to the selective enhancement of both the excitation and the emission rate having one particular handedness of the circular polarization, together with accelerated radiative recombination of valley excitons due to the Purcell effect. The experimental results are corroborated by the optical simulation using the finite-difference time-domain (FDTD) method. Additionally, the single chiral nanoparticle enables the observation of valley-polarized luminescence with a linear excitation. The results provide a promising pathway to enhance valley contrast from monolayer TMDs and utilize them for nanophotonic devices.

Hexagonal Boron Nitride Cavity Optomechanics.

Hexagonal boron nitride (hBN) is an emerging layered material that plays a key role in a variety of two-dimensional devices, and has potential applications in nanophotonics and nanomechanics. Here, we demonstrate the first cavity optomechanical system incorporating hBN. Nanomechanical resonators consisting of hBN beams with average dimensions of 12 µm × 1.2 µm × 28 nm and minimum predicted thickness of 8 nm were fabricated using electron beam induced etching and positioned in the optical near-field of silicon microdisk cavities. Of the multiple devices studied here a maximum 0.16 pm/[Formula: see text] sensitivity to the hBN nanobeam motion is demonstrated, allowing observation of thermally driven mechanical resonances with frequencies between 1 and 23 MHz, and largest mechanical quality factor of 1100 for a 23 MHz mode, at room temperature in high vacuum. In addition, the role of air damping is studied via pressure dependent measurements. Our results constitute an important step toward realizing integrated optomechanical circuits employing hBN.

Second-harmonic generation in multilayer hexagonal boron nitride flakes.

In this Letter, we report the second-harmonic generation (SHG) from thick hexagonal boron nitride (hBN) flakes with approximately 109-111 layers. The resulting effective second-order susceptibility is similar to previously reported few-layer experiments. This confirms that thick hBN flakes can serve as a platform for nonlinear optics, which is useful because thick flakes are easy to exfoliate while retaining a large size. We also show spatial second-harmonic maps revealing that SHG remains a useful tool for the characterization of the layer structure, even in the case of a large number of layers.

Optical Gating of Resonance Fluorescence from a Single Germanium Vacancy Color Center in Diamond.

Scalable quantum photonic networks require coherent excitation of quantum emitters. However, many solid-state systems can undergo a transition to a dark shelving state that inhibits the resonance fluorescence. Here, we demonstrate that by a controlled gating using a weak nonresonant laser, the resonant fluorescence can be recovered and amplified for single germanium vacancies. Employing the gated resonance excitation, we achieve optically stable resonance fluorescence of germanium vacancy centers. Our results are pivotal for the deployment of diamond color centers as reliable building blocks for scalable solid-state quantum networks.

A combined approach to predict spatial temperature evolution and its consequences during FIB processing of soft matter.

Accessing local temperatures and their evolution during focused ion beam (FIB) processing is of particular importance in the context of polymers or biomaterials as they tend to undergo severe chemical and morphological damage due to the high temperatures arising. In this study we present a combination of ion trajectory simulations and thermal spike model based calculations, which allows predicting local temperatures, lateral distributions and evolution during FIB patterning. Simulations and calculations have been done without any approximation or correction factors and lead to results in very good agreement with experiments on polymers taking into account their thermal behaviour. Finally, the model is applied to different scanning strategies which demonstrate how classically applied patterning strategies lead to massive temperature increases which can be the knock out criteria for low melting materials.

Broadband thermal imaging using meta-optics.

Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic aberrations, limiting their utilities. Here, we employ inverse-design to create broadband meta-optics operating in the long-wave infrared (LWIR) regime (8-12 µm). Via a deep-learning assisted multi-scale differentiable framework that links meta-atoms to the phase, we maximize the wavelength-averaged volume under the modulation transfer function (MTF) surface of the meta-optics. Our design framework merges local phase-engineering via meta-atoms and global engineering of the scatterer within a single pipeline. We corroborate our design by fabricating and experimentally characterizing all-silicon LWIR meta-optics. Our engineered meta-optic is complemented by a simple computational backend that dramatically improves the quality of the captured image. We experimentally demonstrate a six-fold improvement of the wavelength-averaged Strehl ratio over the traditional hyperboloid metalens for broadband imaging.

Nonvolatile Phase-Only Transmissive Spatial Light Modulator with Electrical Addressability of Individual Pixels.

Active metasurfaces with tunable subwavelength-scale nanoscatterers are promising platforms for high-performance spatial light modulators (SLMs). Among the tuning methods, phase-change materials (PCMs) are attractive because of their nonvolatile, threshold-driven, and drastic optical modulation, rendering zero-static power, crosstalk immunity, and compact pixels. However, current electrically controlled PCM-based metasurfaces are limited to global amplitude modulation, which is insufficient for SLMs. Here, an individual-pixel addressable, transmissive metasurface is experimentally demonstrated using the low-loss PCM Sb2Se3 and doped silicon nanowire heaters. The nanowires simultaneously form a diatomic metasurface, supporting a high-quality-factor (∼406) quasi-bound-state-in-the-continuum mode. A global phase-only modulation of ∼0.25π (∼0.2π) in simulation (experiment) is achieved, showing ten times enhancement. A 2π phase shift is further obtained using a guided-mode resonance with enhanced light-Sb2Se3 interaction. Finally, individual-pixel addressability and SLM functionality are demonstrated through deterministic multilevel switching (ten levels) and tunable far-field beam shaping. Our work presents zero-static power transmissive phase-only SLMs, enabled by electrically controlled low-loss PCMs and individual meta-molecule addressable metasurfaces.

Roadmap for Optical Metasurfaces.

Metasurfaces have recently risen to prominence in optical research, providing unique functionalities that can be used for imaging, beam forming, holography, polarimetry, and many more, while keeping device dimensions small. Despite the fact that a vast range of basic metasurface designs has already been thoroughly studied in the literature, the number of metasurface-related papers is still growing at a rapid pace, as metasurface research is now spreading to adjacent fields, including computational imaging, augmented and virtual reality, automotive, display, biosensing, nonlinear, quantum and topological optics, optical computing, and more. At the same time, the ability of metasurfaces to perform optical functions in much more compact optical systems has triggered strong and constantly growing interest from various industries that greatly benefit from the availability of miniaturized, highly functional, and efficient optical components that can be integrated in optoelectronic systems at low cost. This creates a truly unique opportunity for the field of metasurfaces to make both a scientific and an industrial impact. The goal of this Roadmap is to mark this "golden age" of metasurface research and define future directions to encourage scientists and engineers to drive research and development in the field of metasurfaces toward both scientific excellence and broad industrial adoption.

Large field-of-view short-wave infrared metalens for scanning fiber endoscopy.

Significance: The scanning fiber endoscope (SFE), an ultrasmall optical imaging device with a large field-of-view (FOV) for having a clear forward view into the interior of blood vessels, has great potential in the cardiovascular disease diagnosis and surgery assistance, which is one of the key applications for short-wave infrared biomedical imaging. The state-of-the-art SFE system uses a miniaturized refractive spherical lens doublet for beam projection. A metalens is a promising alternative that can be made much thinner and has fewer off-axis aberrations than its refractive counterpart. Aim: We demonstrate a transmissive metalens working at 1310 nm for a forward viewing endoscope to achieve a shorter device length and better resolution at large field angles. Approach: We optimize the metalens of the SFE system using Zemax, fabricate it using e-beam lithography, characterize its optical performances, and compare them with the simulations. Results: The SFE system has a resolution of ∼ 140 µ m at the center of field (imaging distance 15 mm), an FOV of ∼ 70 deg , and a depth-of-focus of ∼ 15 mm , which are comparable with a state-of-the-art refractive lens SFE. The use of the metalens reduces the length of the optical track from 1.2 to 0.86 mm. The resolution of our metalens-based SFE drops by less than a factor of 2 at the edge of the FOV, whereas the refractive lens counterpart has a ∼ 3 times resolution degradation. Conclusions: These results show the promise of integrating a metalens into an endoscope for device minimization and optical performance improvement.

Miniature color camera via flat hybrid meta-optics.

The race for miniature color cameras using flat meta-optics has rapidly developed the end-to-end design framework using neural networks. Although a large body of work has shown the potential of this methodology, the reported performance is still limited due to fundamental limitations coming from meta-optics, mismatch between simulated and resultant experimental point spread functions, and calibration errors. Here, we use a HIL optics design methodology to solve these limitations and demonstrate a miniature color camera via flat hybrid meta-optics (refractive + meta-mask). The resulting camera achieves high-quality full-color imaging for a 5-mm aperture optics with a focal length of 5 mm. We observed a superior quality of the images captured by the hybrid meta-optical camera compared to a compound multi-lens optics of a mirrorless commercial camera.