RESUMO
Core-shell polymer particles with different properties were produced through combined suspension-emulsion polymerizations and employed as supports for immobilization of lipase B from Candida antarctica. In order to evaluate how the morphology of the particles affects the immobilization parameters, empirical models were developed to describe the performance of the biocatalysts as a function of the specific area, volume of pores and average pore diameter of the supports. It was observed that the average pore sizes did not affect the enzymatic activities in the analyzed range of pore sizes. It was also observed that the increase of the specific area (and of the volume of pores) led to higher enzyme loadings, also leading to an increase in the esterification activity, as expected. However, when the specific area (and volume of pores) increased, the hydrolytic activity and the retention of hydrolytic activity of the biocatalysts decreased, indicating the existence of diffusional limitations for some hydrolytic reactions, probably because of the high reaction rates.
Assuntos
Enzimas Imobilizadas/química , Proteínas Fúngicas/química , Lipase/química , Biocatálise , Esterificação , Hidrólise , Cinética , Tamanho da Partícula , Polimerização , Poliestirenos/química , PorosidadeRESUMO
The growth and magnetosome production of the marine magnetotactic vibrio Magnetovibrio blakemorei strain MV-1 were optimized through a statistics-based experimental factorial design. In the optimized growth medium, maximum magnetite yields of 64.3 mg/liter in batch cultures and 26 mg/liter in a bioreactor were obtained.
Assuntos
Reatores Biológicos , Magnetossomos/metabolismo , Rhodospirillaceae/crescimento & desenvolvimento , Rhodospirillaceae/metabolismo , Proteínas de Bactérias/metabolismo , Meios de Cultura , Óxido Ferroso-Férrico/metabolismo , Campos Magnéticos , Projetos de Pesquisa , Microbiologia da ÁguaRESUMO
Biosurfactants are a class of functional molecules produced and secreted by microorganisms, which play important roles in cell physiology such as flagellum-dependent or -independent bacterial spreading, cell signaling, and biofilm formation. They are amphipathic compounds and comprise a variety of chemical structures, including rhamnolipids, typically produced by Pseudomonas spp. and also reported within other bacterial genera. The present study is focused on Burkholderia kururiensis KP23(T), a trichloroethylene (TCE)-degrading, N-fixing, and plant growth-promoting bacterium. Herein, we describe the production of rhamnolipids by B. kururiensis, and its characterization by LTQ-Orbitrap Hybrid Mass Spectrometry, a powerful tool that allowed efficient identification of molecular subpopulations, due to its high selectivity, mass accuracy, and resolving power. The population of rhamnolipids produced by B. kururiensis revealed molecular species commonly observed in Pseudomonas spp. and/or Burkholderia spp. In addition, this strain was used as a platform for expression of two Pseudomonas aeruginosa biosynthetic enzymes: RhlA, which directly utilizes ß-hydroxydecanoyl-ACP intermediates in fatty acid synthesis to generate the HAA, and RhlB, the rhamnosyltransferase 1, which catalyzes the transfer of dTDP-L-rhamnose to ß-hydroxy fatty acids in the biosynthesis of rhamnolipids. We show that rhamnolipid production by the engineered B. kururiensis was increased over 600 % when compared to the wild type. Structural analyses demonstrated a molecular population composed mainly of monorhamnolipids, as opposed to wild-type B. kururiensis and P. aeruginosa in which dirhamnolipids are predominant. We conclude that B. kururiensis is a promising biosurfactant-producing organism, with great potential for environmental and biotechnological applications due to its non-pathogenic characteristics and efficiency as a platform for metabolic engineering and production of tailor-made biosurfactants.
Assuntos
Burkholderia/genética , Burkholderia/metabolismo , Glicolipídeos/química , Glicolipídeos/metabolismo , Engenharia Metabólica , Redes e Vias Metabólicas/genética , Clonagem Molecular , Expressão Gênica , Espectrometria de Massas , Pseudomonas aeruginosa/enzimologia , Pseudomonas aeruginosa/genética , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Tensoativos/química , Tensoativos/metabolismoRESUMO
The effect of a lipase-rich enzyme preparation produced by the fungus Penicillium sp. on solid-state fermentation was evaluated in two anaerobic bioreactors (up-flow anaerobic sludge blanket (UASB) and horizontal-flow anaerobic immobilized biomass (HAIB)) treating dairy wastewater with 1200 mg oil and grease/L. The oil and grease hydrolysis step was carried out with 0.1% (w/v) of the solid enzymatic preparation at 30 degrees C for 24 h. This resulted in a final concentration of free acids eight times higher than the initial value. The bioreactors operated at 30 degrees C with hydraulic retention times of 12 h (HAIB) and 20 h (UASB) for a period of 430 days, and had high chemical oxygen demand (COD) removal efficiencies (around 90%) when fed with pre-hydrolyzed wastewater. There was, however, an increase in the effluent oil and grease concentration (from values as low as 17 mg/L to values above 150 mg/L in the UASB bioreactor, and from 38-242 mg/L in the HAIB bioreactor), and oil and grease accumulation in the biomass throughout the operational period (the oil and grease content reached 1.7 times that found in the inoculum of the UASB bioreactor). The HAIB bioreactor gave better results because the support for biomass immobilization acted as a filter, retaining oil and grease at the entry of the bioreactor. The molecular analysis of the Bacteria and Archaea domains revealed significant differences in the microbial profiles in experiments conducted with and without the pre-hydrolysis step. The differences observed in the overall parameters could be related to the microbial diversity of the anaerobic sludge.
Assuntos
Reatores Biológicos/microbiologia , Indústria de Laticínios , Lipase/metabolismo , Consórcios Microbianos , Águas Residuárias/microbiologia , Anaerobiose , Bactérias/genética , Análise da Demanda Biológica de Oxigênio , Biomassa , Ácidos Graxos Voláteis/análise , Concentração de Íons de Hidrogênio , Hidrólise , Methanobacterium/genética , Methanobacterium/isolamento & purificação , Methanosarcinales/genética , Methanosarcinales/isolamento & purificação , Óleos/metabolismo , Penicillium/enzimologia , FilogeniaRESUMO
Enzymes have been highly demanded in diverse applications such as in the food, pharmaceutical, and industrial fuel sectors. Thus, in silico bioprospecting emerges as an efficient strategy for discovering new enzyme candidates. A new program called ProspectBIO was developed for this purpose as it can find non-annotated sequences by searching for homologs of a model enzyme directly in genomes. Here we describe the ProspectBIO software methodology and the experimental validation by prospecting for novel lipases by sequence homology to Candida antarctica lipase B (CaLB) and conserved motifs. As expected, we observed that the new bioprospecting software could find more sequences (1672) than a conventional similarity-based search in a protein database (733). Additionally, the absence of patent protection was introduced as a criterion resulting in the final selection of a putative lipase-encoding gene from Ustilago hordei (UhL). Expression of UhL in Pichia pastoris resulted in the production of an enzyme with activity towards a tributyrin substrate. The recombinant enzyme activity levels were 4-fold improved when lowering the temperature and increasing methanol concentrations during the induction phase in shake-flask cultures. Protein sequence alignment and structural modeling showed that the recombinant enzyme has high similarity and capability of adjustment to the structure of CaLB. However, amino acid substitutions identified in the active pocket entrance may be responsible for the differences in the substrate specificities of the two enzymes. Thus, the ProspectBIO software allowed the finding of a new promising lipase for biotechnological application without the need for laborious and expensive conventional bioprospecting experimental steps.
RESUMO
In countries with a strong agricultural base, such as Brazil, the generation of solid residues is very high. In some cases, these wastes present no utility due to their toxic and allergenic compounds, and so are an environmental concern. The castor bean (Ricinus communis) is a promising candidate for biodiesel production. From the biodiesel production process developed in the Petrobras Research Center using castor bean seeds, a toxic and alkaline waste is produced. The use of agroindustrial wastes in solid-state fermentation (SSF) is a very interesting alternative for obtaining enzymes at low cost. Therefore, in this work, castor bean waste was used, without any treatment, as a culture medium for fungal growth and lipase production. The fungus Penicillium simplicissimum was able to grow and produce an enzyme in this waste. In order to maximize the enzyme production, two sequential designs-Plackett-Burman (variable screening) followed by central composite rotatable design (CCRD)-were carried out, attaining a considerable increase in lipase production, reaching an activity of 155.0 U/g after 96 h of fermentation. The use of experimental design strategy was efficient, leading to an increase of 340% in the lipase production. Zymography showed the presence of different lipases in the crude extract. The partial characterization of such extract showed the occurrence of two lipase pools with distinct characteristics of pH and temperature of action: one group with optimal action at pH 6.5 and 45°C and another one at pH 9.0 and 25°C. These results demonstrate how to add value to a toxic and worthless residue through the production of lipases with distinct characteristics. This pool of enzymes, produced through a low cost methodology, can be applied in different areas of biotechnology.
Assuntos
Biocombustíveis/microbiologia , Substâncias Perigosas/metabolismo , Lipase/metabolismo , Penicillium/enzimologia , Ricinus communis/metabolismo , Resíduos , Biocombustíveis/economia , Biotecnologia , Brasil , Indústria Química , Meios de Cultura/química , Fermentação , Substâncias Perigosas/toxicidade , Concentração de Íons de Hidrogênio , Penicillium/crescimento & desenvolvimento , Eliminação de Resíduos/métodos , TemperaturaRESUMO
The main objective of this work was to optimize lipase production, in terms of hydrolytic and esterification activities, by Penicillium brevicompactum and Penicillium verrucosum in solid state fermentation using agroindustrial residues as raw material. Maxima hydrolytic activities of 48.6 and 87.7 U/g were achieved when P. brevicompactum was cultured in babassu cake and castor meal, respectively. Higher esterification activities (around 244 U/g) were achieved when P. brevicompactum was used as microorganism and babassu cake as raw material. Different experimental conditions led to these promising values, clearly showing that no correlation can be attributed between hydrolytic and esterification activities. In spite of the several applications of lipases which are capable of catalyze synthesis reactions, only few works in this subject are presented in the literature, especially when low cost raw materials are used.
Assuntos
Proteínas Fúngicas/biossíntese , Lipase/biossíntese , Penicillium/enzimologia , Penicillium/crescimento & desenvolvimento , Meios de Cultura/químicaRESUMO
Poly(ethylene terephthalate) (PET) is a petroleum-based plastic that is massively produced and used worldwide. A promising PET recycling process to circumvent petroleum feedstock consumption and help to reduce environmental pollution is microbial or enzymatic biodegradation of post-consumer (PC) PET packages to its monomers-terephthalic acid (TPA) and ethylene glycol (EG)-or to key intermediates in PET synthesis-such as mono- and bis-(2-hydroxyethyl) terephthalate (MHET and BHET). Two species of filamentous fungi previously characterized as lipase producers (Penicillium restrictum and P. simplicissimum) were evaluated in submerged fermentation for induction of lipase production by two inducers (BHET and amorphous PET), and for biodegradation of two substrates (BHET and PC-PET). BHET induced lipase production in P. simplicissimum, achieving a peak of 606.4 U/L at 49 h (12.38 U/L.h), representing an almost twofold increase in comparison to the highest peak in the control (without inducers). Microbial biodegradation by P. simplicissimum after 28 days led to a 3.09% mass loss on PC-PET fragments. In contrast, enzymatic PC-PET depolymerization by cell-free filtrates from a P. simplicissimum culture resulted in low concentrations of BHET, MHET and TPA (up to 9.51 µmol/L), suggesting that there are mechanisms at the organism level that enhance biodegradation. Enzymatic BHET hydrolysis revealed that P. simplicissimum extracellular enzymes catalyze the release of MHET as the predominant product. Our results show that P. simplicissimum is a promising biodegrader of PC-PET that can be further explored for monomer recovery in the context of feedstock recycling processes.
RESUMO
Oleogelation is an emerging technology to structure oils, which can be widely used to substitute saturated and trans fats. Extra virgin olive oil is widely recognized for its high nutritional value, but its utilization in oleogel production is currently limited. In this study, extra virgin olive oil was utilized for the production of a novel oleogel using wax esters derived from soybean fatty acid distillate (SFAD), a byproduct of industrial soybean oil refining. Different concentrations (7%, 10%, 20%, w/w) of SFAD-wax esters were used to evaluate the minimum concentration requirement to achieve oleogelation. Analyses of the mechanical properties of oleogel showed a firmness of 3.8 N, which was then reduced to around 2.1-2.5 N during a storage period of 30 days at 4 °C. Rheological analysis demonstrated that G' is higher than Gâ³ at 20-27 °C, which confirms the solid properties of the oleogel at this temperature range. Results showed that SFAD was successfully utilized for the oleogelation of olive oil, resulting in a novel oleogel with desirable properties for food applications. This study showed that industrial fatty side streams could be reused for the production of value-added oleogels with novel food applications.
Assuntos
Ácidos Graxos/química , Azeite de Oliva/química , Ésteres/química , Compostos Orgânicos/síntese química , Compostos Orgânicos/metabolismo , Óleo de Soja/química , Glycine maxRESUMO
Rhamnolipids (RMLs) have more effectiveness for specific uses according to their homologue proportions. Thus, the novelty of this work was to compare mono-RMLs and di-RMLs physicochemical properties on microbial enhanced oil recovery (MEOR) applications. For this, RML produced by three strains of Pseudomonas aeruginosa containing different homologues proportion were used: a mainly mono-RMLs producer (mono-RMLs); a mainly di-RMLs producer (di-RMLs), and the other one that produces relatively balanced amounts of mono-RML and di-RML homologues (mono/di-RML). For mono-RML, the most abundant molecules were Rha-C10 C10 (m/z 503.3), for di-RML were RhaRha-C10 C10 (m/z 649.4) and for Mono/di-RML were Rha-C10 C10 (m/z 503.3) and RhaRha-C10 C10 (m/z 649.4). All RMLs types presented robustness under high temperature and variation of salinity and pH, and high ability for oil displacement, foam stability, wettability reversal and were classified as safe for environment according to the European Union Directive No. 67/548/EEC. For all these properties, it was observed a highlight for mono-RML. Mono-RML presented the lowest surface tension (26.40 mN/m), interfacial tension (1.14 mN/m), and critical micellar concentration (CMC 27.04 mg/L), the highest emulsification index (EI24 100%) and the best wettability reversal (100% with 25 ppm). In addition, mono-RML showed the best acute toxicity value (454 mg/L), making its application potential even more attractive. Based on the results, it was concluded that all RMLs homologues studied have potential for MEOR applications. However, results showed that mono-RML stood out and have the best mechanism of oil incorporation in micelles due their most effective surface-active physicochemical features.
Assuntos
Decanoatos/química , Glicolipídeos/química , Petróleo/microbiologia , Pseudomonas aeruginosa/química , Ramnose/análogos & derivados , Decanoatos/farmacologia , Glicolipídeos/farmacologia , Humanos , Ramnose/química , Ramnose/farmacologia , Tensão Superficial/efeitos dos fármacos , Tensoativos/química , Tensoativos/farmacologiaRESUMO
The present study aimed to identify novel microbial producers of bioemulsificant compounds from Antarctic soils. Fifty-nine microbial strains were isolated from five different locations at South Shetland Islands, Antarctica, and screened for biosurfactant production by ß-hemolytic activity. Strain So 3.2 was determined as bioemulsifier-producer and identified by phenotypic and molecular characterization as Streptomyces luridus. Emulsification activity, oil displacement method and drop-collapsing test were performed to evaluate the biosurfactant activity with different oils and hydrocarbons using two different culture media (Luria Bertani and Bushnell Haas in the presence of different carbon sources: glucose, glycerol, olive oil and n-Hexadecane). Cell free supernatant of Bushnell Haas culture supplemented with n-Hexadecane showed the best results for all tests. Emulsification of hydrocarbons exceeded 60%, reaching up to 90% on oil with high API grade, while displacement tests ranged from 8 cm to 4 cm in diameter according the culture media and tested oils. Our results revealed that Streptomyces luridus So3.2 is able to produce bioemulsifiers capable of emulsifying hydrocarbons and oils, which could be used in different biotechnological applications, particularly for bioremediation of environments contaminated by oil leaks.
Assuntos
Emulsificantes/metabolismo , Hidrocarbonetos/química , Streptomyces/isolamento & purificação , Regiões Antárticas , Biodegradação Ambiental , Sistema Livre de Células , Meios de Cultura/química , Microbiologia do Solo , Streptomyces/classificação , Streptomyces/crescimento & desenvolvimento , Streptomyces/metabolismoRESUMO
The microbial production of fumaric acid by Rhizopus arrhizus NRRL 2582 has been evaluated using soybean cake from biodiesel production processes and very high polarity (VHP) sugar from sugarcane mills. Soybean cake was converted into a nutrient-rich hydrolysate via a two-stage bioprocess involving crude enzyme production via solid state fermentations (SSF) of either Aspergillus oryzae or R. arrhizus cultivated on soybean cake followed by enzymatic hydrolysis of soybean cake. The soybean cake hydrolysate produced using crude enzymes derived via SSF of R. arrhizus was supplemented with VHP sugar and evaluated using different initial free amino nitrogen (FAN) concentrations (100, 200, and 400 mg/L) in fed-batch cultures for fumaric acid production. The highest fumaric acid concentration (27.3 g/L) and yield (0.7 g/g of total consumed sugars) were achieved when the initial FAN concentration was 200 mg/L. The combination of VHP sugar with soybean cake hydrolysate derived from crude enzymes produced by SSF of A. oryzae at 200 mg/L initial FAN concentration led to the production of 40 g/L fumaric acid with a yield of 0.86 g/g of total consumed sugars. The utilization of sugarcane molasses led to low fumaric acid production by R. arrhizus, probably due to the presence of various minerals and phenolic compounds. The promising results achieved through the valorization of VHP sugar and soybean cake suggest that a focused study on molasses pretreatment could lead to enhanced fumaric acid production.
Assuntos
Aspergillus oryzae/enzimologia , Biocombustíveis , Fumaratos , Glycine max , Resíduos Industriais , Saccharum , Açúcares/metabolismo , Técnicas de Cultura Celular por Lotes , Indústria Química , Conservação dos Recursos Naturais , Fermentação , Indústria Alimentícia , Fumaratos/metabolismo , Hidrólise , Rhizopus/enzimologiaRESUMO
Solid-state fermentation (SSF) has recently been proposed as an alternative to submerged fermentation for the production of poly(hydroxyalkanoates). In the present work, X-ray diffraction, differential scanning calorimetry, nuclear magnetic resonance and infrared spectroscopy were employed to investigate the chemical structure, as well as the thermal properties and the crystalline morphology of poly(3-hydroxybutyrate) samples produced by SSF, using as raw material either soy cake or soy cake supplemented with 2.5% (m/m) sugarcane molasses. The results obtained showed that the biopolymer obtained by SSF presented the same properties as commercial PHB, except for the higher molar mass and the lower degree of crystallinity that were observed. Thus, the present data indicate that solid-state fermentation is an interesting alternative for the production of PHB, allowing the production of biopolymers with adequate properties from low-cost, renewable resources.
Assuntos
Meios de Cultura/química , Cupriavidus/metabolismo , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Fermentação , Hidroxibutiratos/química , Melaço/análise , Poliésteres/química , Glycine max/químicaRESUMO
The production of wax esters using microbial oils was demonstrated in this study. Microbial oils produced from food waste and by-product streams by three oleaginous yeasts were converted into wax esters via enzymatic catalysis. Palm oil was initially used to evaluate the influence of temperature and enzyme activity on wax ester synthesis catalysed by Novozyme 435 and Lipozyme lipases using cetyl, oleyl and behenyl alcohols. The highest conversion yields (up to 79.6%) were achieved using 4U/g of Novozyme 435 at 70°C. Transesterification of microbial oils to behenyl and cetyl esters was achieved at conversion yields up to 87.3% and 69.1%, respectively. Novozyme 435 was efficiently reused for six and three cycles during palm esters and microbial esters synthesis, respectively. The physicochemical properties of microbial oil derived behenyl esters were comparable to natural waxes. Wax esters from microbial oils have potential applications in cosmetics, chemical and food industries.
Assuntos
Ésteres , Indústria Alimentícia , Resíduos Industriais , Esterificação , Lipase , Óleos de Plantas , CerasRESUMO
The production of biosurfactant by Rhodococcus erythropolis during the growth on glycerol was investigated. The process was carried out at 28 degrees C in a 1.5-L bioreactor using glycerol as carbon source. The bioprocess was monitored through measurements of biosurfactant concentration and glycerol consumption. After 51 h of cultivation, 1.7 g/L of biosurfactant, surface, and interfacial tensions values (with n-hexadecane) of 43 and 15 mN/m, respectively, 67% of Emulsifying Index (E24), and 94% of oil removal were obtained. The use of glycerol rather than what happens with hydrophobic carbon source allowed the release of the biosurfactant, originally associated to the cell wall.
Assuntos
Reatores Biológicos/microbiologia , Carbono/metabolismo , Técnicas de Cultura de Células/métodos , Glicerol/metabolismo , Rhodococcus/metabolismo , Tensoativos/química , Tensoativos/metabolismo , Esgotos/microbiologia , Tensoativos/análiseRESUMO
Rhamnolipids are biosurfactants with potential for diversified industrial and environmental uses. The present study evaluated three strategies for increasing the production of rhamnolipid-type biosurfactants produced by Pseudomonas aeruginosa strain PA1. The influence of pH, the addition of P. aeruginosa spent culture medium and the use of a fed-batch process were examined. The culture medium adjusted to pH 7.0 was the most productive. Furthermore, the pH of the culture medium had a measurable effect on the ratio of synthesized mono- and dirhamnolipids. At pH values below 7.3, the proportion of monorhamnolipids decreased from 45 to 24%. The recycling of 20% of the spent culture medium in where P. aeruginosa was grown up to the later stationary phase was responsible for a 100% increase in rhamnolipid volumetric productivity in the new culture medium. Finally, the use of fed-batch operation under conditions of limited nitrogen resulted in a 3.8-fold increase in the amount of rhamnolipids produced (2.9 g L(-1)-10.9 g L(-1)). These results offer promising pathways for the optimization of processes for the production of rhamnolipids.
RESUMO
This study presents the techno-economic evaluation of 2,3-butanediol (BDO) production via fermentation using glycerol, sucrose and sugarcane molasses as carbon sources. Literature-cited experimental data were used to design the fermentation stage, whereas downstream separation of BDO was based on reactive extraction of BDO employing an aldehyde to convert BDO into an acetal that is immiscible with water. The selected downstream process can be used in all fermentations employed. Sensitivity analysis was carried out targeting the estimation of the minimum selling price (MSP) of BDO at different plant capacities and raw material purchase costs. In all cases, the MSP of BDO is higher than 1 $/kg that is considered as the target in order to characterize a fermentation product as platform chemical. The complex nutrient supplements, the raw material market price and the fermentation efficiency were identified as the major reasons for the relatively high MSP observed.
Assuntos
Butileno Glicóis/metabolismo , Conservação dos Recursos Naturais/métodos , Melaço/análise , Saccharum/química , Técnicas de Cultura Celular por Lotes , Reatores Biológicos , Butileno Glicóis/química , Carbono , Análise Custo-Benefício , Fermentação , Glicerol , Concentração de Íons de Hidrogênio , Microbiologia Industrial/métodos , SacaroseRESUMO
A Bacillus subtilis isolate was shown to be able to produce extracellular protease in solid-state fermentations (SSF) using soy cake as culture medium. A significant effect of inoculum concentration and physiological age on pro tease production was observed. Maximum activities were obtained for inocula consisting of exponentially growing cells at inoculum concentrations in the range of 0.7-2.0 mg g(-1). A comparative study on the influence of cultivation temperature and initial medium pH on protease production in SSF and in submerged fermentation (SF) revealed that in SSF a broader pH range (5-10), but the same optimum temperature (37 degrees C), is obtained when compared to SF. A kinetic study showed that enzyme production is associated with bacterial growth and that enzyme inactivation begins before biomass reaches a maximum level for both SF and SSF. Maximum protease activity and productivity were 960 U g(-1) and 15.4 U g-1 h-1 for SSF, and 12 U mL-1 and 1.3 U mL-1 h-1 for SF. When SSF protease activity was expressed by volume of enzyme extract, the enzyme level was 10-fold higher and the enzyme productivity 45% higher than in SF. These results indicate that this bacterial strain shows a high biotechnological potential for protease production in solid-state fermentation.
Assuntos
Bacillus subtilis/crescimento & desenvolvimento , Bacillus subtilis/metabolismo , Reatores Biológicos/microbiologia , Técnicas de Cultura de Células/métodos , Glycine max/microbiologia , Peptídeo Hidrolases/biossíntese , Peptídeo Hidrolases/química , Proliferação de Células , Ativação Enzimática , Estabilidade Enzimática , Fermentação/fisiologia , Concentração de Íons de Hidrogênio , Peptídeo Hidrolases/isolamento & purificação , TemperaturaRESUMO
The production of lipase by Penicillium simplicissimum in solid-state fermentation was studied using babassu cake as the basal medium. Tray-type and packed-bed bioreactors were employed. In the former, the influence of temperature; content of the medium, and medium supplementation with olive oil, sugarcane molasses, corn steep liquor, and yeast hydrolysate was studied. For all combinations of supplements, a temperature of 30 degrees C, a moisture content of 70%, and a concentration of carbon source of 6.25% (m/m, dry basis) provided optimum conditions for lipase production. When used as single supplements olive oil and molasses also were able to provide high lipase activities (20 U/g). Using packed-bed bioreactors and molasses-supplemented medium, optimum conditions for enzyme production were air superficial velocities above 55 cm/min and temperatures below 28 degrees C. The lower temperature optimum found for these reactors is probably related to radial heat gradient formation inside the packed bed. Maximum lipase activities obtained in these bioreactors (26.4 U/g) were 30% higher than in tray-type reactors.
Assuntos
Reatores Biológicos/microbiologia , Técnicas de Cultura de Células/métodos , Lipase/biossíntese , Lipase/isolamento & purificação , Melaço/microbiologia , Penicillium/enzimologia , Penicillium/crescimento & desenvolvimento , Óleos de Plantas/química , Lipase/química , Azeite de Oliva , TemperaturaRESUMO
A recombinant thermostable lipase (Pf2001Δ60) from the hyperthermophilic Archaeon Pyrococcus furiosus (PFUL) was immobilized by hydrophobic interaction on octyl-agarose (octyl PFUL) and by covalent bond on aldehyde activated-agarose in the presence of DTT at pH = 7.0 (one-point covalent attachment) (glyoxyl-DTT PFUL) and on glyoxyl-agarose at pH 10.2 (multipoint covalent attachment) (glyoxyl PFUL). The enzyme's properties, such as optimal temperature and pH, thermostability, and selectivity, were improved by covalent immobilization. The highest enzyme stability at 70°C for 48 h incubation was achieved for glyoxyl PFUL (around 82% of residual activity), whereas glyoxyl-DTT PFUL maintained around 69% activity, followed by octyl PFUL (27% remaining activity). Immobilization on glyoxyl-agarose improved the optimal temperature to 90°C, while the optimal temperature of octyl PFUL was 70°C. Also, very significant changes in activity with different substrates were found. In general, the covalent bond derivatives were more active than octyl PFUL. The E value also depended substantially on the derivative and the conditions used. It was observed that the reaction of glyoxyl-DTT PFUL using methyl mandelate as a substrate at pH 7 presented the best results for enantioselectivity (E = 22) and enantiomeric excess (ee (%) = 91).