Small-angle X-ray scattering from a dual-component organogel to exhibit a charge transfer interaction.

The structure of a dual-component organogel consisting of methyl 4,6-O-(p-aminobenzylidene)-alpha-D-glucopyranoside and methyl 4,6-O-(p-nitrobenzylidene)-alpha-D-glucopyranoside in diphenyl ether was investigated with small-angle X-ray scattering (SAXS). The individual components gelatinized the solvent to yield a colorless gel and the gel fiber consisted of the crystal, providing the crystalline peaks at the same diffraction angles as those of the solid samples. When the components were mixed in equimolar ratio and dissolved in diphenyl ether, a yellow gel was formed and the crystalline peaks disappeared. For all compositions, the SAXS profiles were well fitted by a cylinder model. The cross-sectional radius of gyration, r(c), was determined from the cross-sectional Guinier plot (qI vs q(2), where I and q are the scattering intensity and the magnitude of the scattering vector). The value of r(c) reached a minimum of 3.0 nm at the equimolar composition. By correcting the data for the thermal scattering background, we obtained the entire SAXS profile for the equimolar dual-component gel. From this profile, the radial electron density distribution was determined and the radius of the cylinder was estimated to be 2.6 nm. The electron density distribution thus obtained revealed that four gelator molecules are packed in the sectional direction. This model was consistent with the size of the gelator molecules.

Organic templates for the generation of inorganic materials.

Mankind's fascination with shapes and patterns, many examples of which come from nature, has greatly influenced areas such as art and architecture. Science too has long since been interested in the origin of shapes and structures found in nature. Whereas organic chemistry in general, and supramolecular chemistry especially, has been very successful in creating large superstructures of often stunning morphology, inorganic chemistry has lagged behind. Over the last decade, however, researchers in various fields of chemistry have been studying novel methods through which the shape of inorganic materials can be controlled at the micro- or even nanoscopic level. A method that has proven very successful is the formation of inorganic structures under the influence of (bio)organic templates, which has resulted in the generation of a large variety of structured inorganic structures that are currently unattainable through any other method.

Molecular design of "super" hydrogelators: understanding the gelation process of azobenzene-based sugar derivatives in water.

[structure: see text]. 1: R = beta-D-glucopyranoside. 2: R = alpha-D-glucopyranoside. 3: R = alpha-D-galactopyranoside. 4: R = alpha-D-mannopyranoside. As an attempt to rationally design aqueous organogelators, a bolaamphiphilic azobenzene derivative (1) bearing two sugar groups was synthesized. Compound 1 formed a gel in water even at concentrations as low as 0.05 wt % (0.65 mM). Spectroscopic studies and electron-micrographic observations have clarified the gel structure and the origin of the gelation ability for water.

Entrapment and release of quinoline derivatives using a hydrogel of a low molecular weight gelator.

Gels of low molecular weight gelators (LMWGs) are self-assembled, thermoreversible, viscoelastic materials which can also be rendered sensitive to light, pH or chemical substances by simple chemical modifications. In addition, the ability of some of these LMWGs to gelate water (hydrogelators) makes these gels interesting, new materials for drug delivery applications. In this paper, for the first time, a release study from LMWG gels is presented. This study concerns the release of small (model) drug molecules: 8-aminoquinoline (AQ) and 2-hydroxyquinoline (HQ), from gels of N,N'-dibenzoyl-L-cystine (DBC). DBC forms stable, clear gels in water, 150 mM NaCl solution and PBS (phosphate-buffered saline at pH 7.4) with gel-to-sol transition temperatures (Tgs) of 40-120 degrees C, depending on the gelator concentration (from 2.23 to 22.3 mM). The release of HQ from DBC gels was found to be approximately seven times faster than that of AQ and the initial release of the latter follows the kinetics of gel degradation. These observations indicate that AQ is preferentially retained in the gel, presumably as a result of stronger interactions with the gelator molecules (i.e. DBC-COO-+ H3N-AQ). These results indicate the potential of LMWG gels as delivery vehicles for small drug molecules and also show that the release profiles for such systems can be fine-tuned by the correct choice of gelator-drug combination.

Energy transfer from a fluorescent hydrogel to a hosted fluorophore.

The fluorescent properties of a new 1,3,5-cyclohexyltricarboxamide-based low-molecular-weight hydrogelator (1) derivatized with one hydrophobic fluorophore and two hydrophilic substituents have been investigated. Gels of 1 are composed of long, nonbranched fibers of uniform diameter, as shown by cryo-transmission electron microscopy (cryo-TEM). The aggregation of the naphthalene fluorophore moieties of the gelator molecules in the gel fibers favors the occurrence of a fast energy migration process that allows a very efficient sensitization of the fluorescence of a hosted fluorophore. Such processes have been investigated by the addition of propyldansylamide (PDNS), at two different concentrations, to gels of 1. Around 30% of the total PDNS added to the gels was found to be incorporated in the gel fibers, as confirmed by deconvolution of the fluorescence spectrum, excited-state lifetime measurements, and steady-state and time-resolved fluorescence anisotropy measurements. Moreover, anisotropy measurements show that the fluorophore that is incorporated within the gel fibers is almost completely immobilized, indicating that the interactions of PDNS with the gelator moieties are very strong. This particular configuration of donor (1) and acceptor (PDNS) molecules leads to a very efficient antenna effect, where 50% of the absorbed photons are funneled through to the dansyl derivative when one PDNS molecule is incorporated in the gel fibers for every 100 gelator molecules. A 5-fold higher concentration of PDNS increases the percentage of funneled photons to 75%.

Cyclohexane bis-urea compounds for the gelation of water and aqueous solutions.

A new class of efficient hydrogelators has been developed by a simple modification of the peripheral substituents of cyclohexane bis-urea organogelators with hydrophilic hydroxy or amino functionalities. These bis-urea hydrogelators were synthesised in two or three steps using an alternative procedure to the common isocyanate method. Gelation was obtained with organic solvents, water and strongly basic aqueous solutions like 25% ammonia. Hydrogelation was found to depend on a delicate balance between the hydrophobicity of the alkyl chains, hydrophilicity of the terminal substituents and the enantiomeric purity of the compound. The hydrogels consisted of a network of fibers, in which all urea groups are involved in intermolecular hydrogen bonding. Most likely, gelation is driven by hydrophobic interactions of the methylene units, whereas hydrogen bond formation between the urea groups provides the necessary anisotropy of the aggregation and the high thermal stability of the gels.

Cyclohexane-based low molecular weight hydrogelators: a chirality investigation.

Seven new 1,3,5-cyclohexyltricarboxamide-phenylalanine derivatives were synthesized in order to investigate the effect of the amino acid chirality on the gelating properties of these small molecules in water. Gelation tests have shown that enantiomerically pure homochiral 1,3,5-cyclohexyltricarboxamide-L-phenylalanine is a non-hydrogelator as it crystallizes from water, whereas the heterochiral derivatives with either two L-phenylalanine moieties and one D-phenylalanine (LLD), or vice versa (DDL), are very good hydrogelators. Concentration-dependent gel-to-sol transition-temperature (T(gs)) curves for LLD or DDL gels show a sigmoidal behaviour, which is in contrast to the logarithmic curves generally observed for gels derived from low molecular weight gelators (LMWGs). Such sigmoidal behaviour can be related to interactions between fibre bundles, which give rise to intertwined bundles of fibres. Transmission electron microscopy (TEM) images of LLD and DDL gels show a network of thin, unbranched, fibre bundles with diameters of 20 nm. Right-handed twisted fibre bundles are present in the LLD gel, whereas left-handed structures can be found in the DDL gel. Each bundle of fibres consists of a finite number of primary fibres. Gels consisting of mixtures of gelators, LLD and DDL, and nongelators (LLL or DDD) were investigated by means of T(gs) measurements, CD spectroscopy and TEM. Results show that the incorporation of nongelator molecules into gel fibres occurs; this leads to higher T(gs) values and to changes in the helicity of the fibre bundles. Furthermore, it was found that peripheral functionalization of the homochiral derivatives LLL or DDD by means of a second amino acid or a hydrophilic moiety can overcome the effect of chirality; this process in turn leads to good hydrogelators.

Charge-transfer phenomena in novel, dual-component, sugar-based organogels.

The synthesis of a new saccharide-based gelator (2) containing a donor moiety has been described. Gelation experiments of a dual-component gel consisting of a saccharide-based gelator bearing an acceptor group (1) and of 2 have been performed in a variety of organic solvents and water. Moreover, gelation tests at different molar ratios of 1 and 2 have been performed in water, octanol, and diphenyl ether. In these last two solvents a gel color change was observed, from colorless to yellow, upon cooling of the sample to room temperature. This phenomenon was further investigated by UV-visible spectroscopy, which revealed the presence of charge-transfer interactions in the gel, in octanol. Temperature-dependence UV spectroscopy confirmed that such interactions occur in the gel but not in the corresponding solution sample. Furthermore, T(gel) measurements show that dual-component gels of 1 and 2 present increased thermal stability at a 50:50 ratio of the two gelators, in dependence of the solvent. Transmission electron microscopy (TEM) images of the single-component gels in diphenyl ether revealed that they consist of a fibrous network, while the dual-component gel presents a novel, helical, fibrous-bundle structure.

Orthogonal self-assembly of low molecular weight hydrogelators and surfactants.

The concurrent self-assembly of new 1,3,5-trisamide-cyclohexane-based low molecular weight hydrogelators and various surfactants in water leads to the formation of self-assembled fibrillar networks with encapsulated micelles. This prototype system presents an example of orthogonal self-assembly, that is, the independent formation of two different supramolecular structures, each with their own characteristics that coexist within a single system.